-
-
Save Mounium/2db8cf66df7ce72848e722b5d99238c4 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Linux version 4.9.66 (nixbld@localhost) (gcc version 6.4.0 (GCC) ) #1-NixOS SMP Thu Nov 30 08:39:15 UTC 2017 | |
Command line: initrd=\efi\nixos\5z2bfq5h8phyyg5cjs99m8wfyy6nbxmf-initrd-initrd.efi systemConfig=/nix/store/5s3k9vfd49c60fkqng7ra787z8v6cjc8-nixos-system-eni-18.03pre-git init=/nix/store/5s3k9vfd49c60fkqng7ra787z8v6cjc8-nixos-system-eni-18.03pre-git/init loglevel=4 | |
[drm] Initialized | |
i915 0000:00:02.0: enabling device (0000 -> 0003) | |
[drm] Memory usable by graphics device = 2048M | |
[drm] Replacing VGA console driver | |
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
[drm] Driver supports precise vblank timestamp query. | |
[drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 | |
i915 0000:00:02.0: No connectors reported connected with modes | |
[drm] Cannot find any crtc or sizes - going 1024x768 | |
i915 0000:00:02.0: fb1: inteldrmfb frame buffer device | |
[drm] amdgpu kernel modesetting enabled. | |
AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> | |
AMD IOMMUv2 functionality not available on this system | |
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 | |
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 | |
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 | |
fb: switching to amdgpudrmfb from EFI VGA | |
Console: switching to colour dummy device 80x25 | |
[drm] initializing kernel modesetting (TONGA 0x1002:0x6939 0x1458:0x22BB 0xF1). | |
[drm] register mmio base: 0xF7D00000 | |
[drm] register mmio size: 262144 | |
[drm] doorbell mmio base: 0xF0000000 | |
[drm] doorbell mmio size: 2097152 | |
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e | |
[drm] probing mlw for device 8086:c01 = 261ad03 | |
[drm] VM PRT is supported! | |
[drm] VCE enabled in physical mode | |
[drm] BIOS signature incorrect 0 0 | |
amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff | |
[drm] GPU post is not needed | |
amdgpu 0000:01:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used) | |
amdgpu 0000:01:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF | |
[drm] Detected VRAM RAM=4096M, BAR=256M | |
[drm] RAM width 256bits GDDR5 | |
[TTM] Zone kernel: Available graphics memory: 4027134 kiB | |
[TTM] Zone dma32: Available graphics memory: 2097152 kiB | |
[TTM] Initializing pool allocator | |
[TTM] Initializing DMA pool allocator | |
[drm] amdgpu: 4096M of VRAM memory ready | |
[drm] amdgpu: 4096M of GTT memory ready. | |
[drm] GART: num cpu pages 1048576, num gpu pages 1048576 | |
[drm] PCIE GART of 4096M enabled (table at 0x0000000000040000). | |
amdgpu 0000:01:00.0: amdgpu: using MSI. | |
[drm] amdgpu: irq initialized. | |
amdgpu: [powerplay] amdgpu: powerplay sw initialized | |
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000100000008, cpu addr 0xffff8ce3dd745008 | |
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000100000018, cpu addr 0xffff8ce3dd745018 | |
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000100000028, cpu addr 0xffff8ce3dd745028 | |
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000100000038, cpu addr 0xffff8ce3dd745038 | |
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000100000048, cpu addr 0xffff8ce3dd745048 | |
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000100000058, cpu addr 0xffff8ce3dd745058 | |
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000100000068, cpu addr 0xffff8ce3dd745068 | |
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000100000078, cpu addr 0xffff8ce3dd745078 | |
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000100000088, cpu addr 0xffff8ce3dd745088 | |
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x0000000100000098, cpu addr 0xffff8ce3dd745098 | |
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000001000000a8, cpu addr 0xffff8ce3dd7450a8 | |
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x00000001000000b8, cpu addr 0xffff8ce3dd7450b8 | |
[drm] Found UVD firmware Version: 1.65 Family ID: 10 | |
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x0000000000959f40, cpu addr 0xffffad348264ef40 | |
[drm] Found VCE firmware Version: 52.8 Binary ID: 3 | |
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000001000000d8, cpu addr 0xffff8ce3dd7450d8 | |
amdgpu 0000:01:00.0: fence driver on ring 14 use gpu addr 0x00000001000000e8, cpu addr 0xffff8ce3dd7450e8 | |
amdgpu 0000:01:00.0: fence driver on ring 15 use gpu addr 0x00000001000000f8, cpu addr 0xffff8ce3dd7450f8 | |
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table! | |
[drm] DAL is enabled | |
[drm] DC: create_links: connectors_num: physical:4, virtual:0 | |
[drm] Connector[0] description:signal 32 | |
[drm] Using channel: CHANNEL_ID_DDC1 [1] | |
[drm] Connector[1] description:signal 4 | |
[drm] Using channel: CHANNEL_ID_DDC3 [3] | |
[drm] Connector[2] description:signal 2 | |
[drm] Using channel: CHANNEL_ID_DDC5 [5] | |
[drm] Connector[3] description:signal 2 | |
[drm] Using channel: CHANNEL_ID_DDC6 [6] | |
[drm] Display Core initialized | |
[drm] amdgpu: freesync_module init done ffff8ce3df0d8d00. | |
[drm] link=0, dc_sink_in= (null) is now Disconnected | |
[drm] DCHPD: connector_id=0: dc_sink didn't change. | |
[drm] link=1, dc_sink_in= (null) is now Disconnected | |
[drm] DCHPD: connector_id=1: dc_sink didn't change. | |
[drm] link=2, dc_sink_in= (null) is now Disconnected | |
[drm] DCHPD: connector_id=2: dc_sink didn't change. | |
[drm] SADs count is: -2, don't need to read it | |
[drm] [Detect] [DDVI][ConnIdx:3] 22EN33: [Block 0] 00 FF FF FF FF FF FF 00 1E 6D 7C 59 C9 B4 00 00 09 17 01 03 6C 30 1B 78 EA 33 35 A3 54 4F 9E 27 11 50 54 A7 6B 80 71 4F 81 C0 81 00 81 80 95 00 90 40 A9 C0 B3 00 02 3A 80 18 71 38 2D 40 58 2C 45 00 E0 0E 11 00 00 1E 00 00 00 FD 00 38 4B 1E 53 0F 00 0A 20 20 20 20 20 20 00 00 00 FC 00 32 32 45 4E 33 33 0A 20 20 20 20 20 20 00 00 00 FF 00 33 30 39 4E 44 57 45 31 43 32 38 31 0A 00 8F ^ | |
[drm] dc_link_detect: manufacturer_id = 6D1E, product_id = 597C, serial_number = B4C9, manufacture_week = 9, manufacture_year = 23, display_name = 22EN33, speaker_flag = 0, audio_mode_count = 0 | |
[drm] link=3, dc_sink_in=ffff8ce3db017400 is now Connected | |
[drm] DCHPD: connector_id=3: Old sink= (null) New sink=ffff8ce3db017400 | |
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
[drm] Driver supports precise vblank timestamp query. | |
[drm] KMS initialized. | |
[drm] ring test on 1 succeeded in 10 usecs | |
[drm] ring test on 2 succeeded in 28 usecs | |
[drm] ring test on 3 succeeded in 31 usecs | |
[drm] ring test on 4 succeeded in 12 usecs | |
[drm] ring test on 5 succeeded in 11 usecs | |
[drm] ring test on 6 succeeded in 11 usecs | |
[drm] ring test on 7 succeeded in 12 usecs | |
[drm] ring test on 8 succeeded in 12 usecs | |
[drm] ring test on 9 succeeded in 13 usecs | |
[drm] ring test on 10 succeeded in 6 usecs | |
[drm] ring test on 11 succeeded in 6 usecs | |
[drm] ring test on 12 succeeded in 1 usecs | |
[drm] UVD initialized successfully. | |
[drm] ring test on 13 succeeded in 25 usecs | |
[drm] ring test on 14 succeeded in 8 usecs | |
[drm] ring test on 15 succeeded in 5 usecs | |
[drm] VCE initialized successfully. | |
[drm] fb mappable at 0xE0B63000 | |
[drm] vram apper at 0xE0000000 | |
[drm] size 8294400 | |
[drm] fb depth is 24 | |
[drm] pitch is 7680 | |
fbcon: amdgpudrmfb (fb0) is primary device | |
[drm] Atomic commit: SET crtc id 0: [ffff8ce3e20ed000] | |
[drm] dc_commit_targets: 1 targets | |
[drm] core_target 0xe20f4aa0: stream_count=1 | |
[drm] core_stream 0xdb28d400: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080; | |
[drm] pix_clk_khz: 148500, h_total: 2200, v_total: 1125 | |
[drm] sink name: 22EN33, serial: 46281 | |
[drm] link: 3 | |
[drm] dce_get_required_clocks_state: clocks unsupported | |
[drm] [Mode] [DDVI][ConnIdx:3] {1920x1080, 2200x1125@148500Khz}^ | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
Console: switching to colour frame buffer device 240x67 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device | |
[drm] ib test on ring 1 succeeded | |
[drm] ib test on ring 2 succeeded | |
[drm] ib test on ring 3 succeeded | |
[drm] ib test on ring 4 succeeded | |
[drm] ib test on ring 5 succeeded | |
[drm] ib test on ring 6 succeeded | |
[drm] ib test on ring 7 succeeded | |
[drm] ib test on ring 8 succeeded | |
[drm] ib test on ring 9 succeeded | |
[drm] ib test on ring 10 succeeded | |
[drm] ib test on ring 11 succeeded | |
[drm] ib test on ring 12 succeeded | |
[drm] ib test on ring 13 succeeded | |
[drm] Initialized amdgpu 3.9.0 20150101 for 0000:01:00.0 on minor 1 | |
Failed to get backlight or LED device 'backlight:acpi_video0': No such device | |
systemd-backlight@backlight:acpi_video0.service: Main process exited, code=exited, status=1/FAILURE | |
Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0. | |
systemd-backlight@backlight:acpi_video0.service: Unit entered failed state. | |
systemd-backlight@backlight:acpi_video0.service: Failed with result 'exit-code'. | |
Invalid font metadata - width: 4024420864 (max 32), height: 4294937827 (max 32), count: 2168012080 (max 512) | |
Fonts will not be copied to remaining consoles | |
Process '/nix/store/f99945b326p1arzv459mhjp7wqz580pq-alsa-utils-1.1.5/sbin/alsactl restore 2' failed with exit code 99. | |
Process '/nix/store/f99945b326p1arzv459mhjp7wqz580pq-alsa-utils-1.1.5/sbin/alsactl restore 0' failed with exit code 99. | |
Process '/nix/store/f99945b326p1arzv459mhjp7wqz580pq-alsa-utils-1.1.5/sbin/alsactl restore 1' failed with exit code 99. | |
Started udev Wait for Complete Device Initialization. | |
Startup finished in 4.528s (kernel) + 14.059s (userspace) = 28.084s. | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
/nix/store/k05cfxc0zhjwhsd2brbl0ka9n4h1w4q0-xauth-1.0.10/bin/xauth: file /var/run/slim.auth does not exist | |
slim: waiting for X server to begin accepting connections | |
X.Org X Server 1.18.4 | |
Release Date: 2016-07-19 | |
X Protocol Version 11, Revision 0 | |
Build Operating System: Linux 4.9.66 x86_64 | |
Current Operating System: Linux eni 4.9.66 #1-NixOS SMP Thu Nov 30 08:39:15 UTC 2017 x86_64 | |
Kernel command line: initrd=\efi\nixos\5z2bfq5h8phyyg5cjs99m8wfyy6nbxmf-initrd-initrd.efi systemConfig=/nix/store/5s3k9vfd49c60fkqng7ra787z8v6cjc8-nixos-system-eni-18.03pre-git init=/nix/store/5s3k9vfd49c60fkqng7ra787z8v6cjc8-nixos-system-eni-18.03pre-git/init loglevel=4 | |
Build Date: 03 December 2017 03:34:13PM | |
Current version of pixman: 0.34.0 | |
Before reporting problems, check http://wiki.x.org | |
to make sure that you have the latest version. | |
Markers: (--) probed, (**) from config file, (==) default setting, | |
(++) from command line, (!!) notice, (II) informational, | |
(WW) warning, (EE) error, (NI) not implemented, (??) unknown. | |
(++) Log file: "/dev/null", Time: Mon Dec 4 12:21:15 2017 | |
(++) Using config file: "/nix/store/8ppisaxvzrzzx6ckndw1lxir4zn1if13-xserver.conf" | |
(==) Using config directory: "/etc/X11/xorg.conf.d" | |
(==) Using system config directory "/nix/store/7c3yxc9pbcy1gzmqplvahhfx01qx44ax-xorg-server-1.18.4/share/X11/xorg.conf.d" | |
(==) ServerLayout "Layout[all]" | |
(**) |-->Screen "Screen-amdgpu[0]" (0) | |
(**) | |-->Monitor "<default monitor>" | |
(**) | |-->Device "Device-amdgpu[0]" | |
(==) No monitor specified for screen "Screen-amdgpu[0]". | |
Using a default monitor configuration. | |
(**) Option "DontZap" "on" | |
(**) Option "AllowMouseOpenFail" "on" | |
(==) Automatically adding devices | |
(==) Automatically enabling devices | |
(==) Automatically adding GPU devices | |
(==) Max clients allowed: 256, resource mask: 0x1fffff | |
(**) FontPath set to: | |
/nix/store/z039pfkg3bjm9sgl3ry5lr0ajxjv9prj-font-bh-lucidatypewriter-100dpi-1.0.3/lib/X11/fonts/100dpi, | |
/nix/store/fb5jk0m2rmfprj8bz7j4zw34nx5jpi5y-font-bh-lucidatypewriter-75dpi-1.0.3/lib/X11/fonts/75dpi, | |
/nix/store/0k6gpil1199mjzrhmv7yamk0l8f6z2ng-font-bh-100dpi-1.0.3/lib/X11/fonts/100dpi, | |
/nix/store/ii48p7kmw5jqzllvvifalakx8a2pq3lg-font-misc-misc-1.1.2/lib/X11/fonts/misc, | |
/nix/store/pr9m41mz0rd0ghn7flqc4h62kqdw9nmr-font-cursor-misc-1.0.3/lib/X11/fonts/misc, | |
/nix/store/n3x8iq4k11vc7b4wzjiz108494mw22s7-unifont-10.0.06/share/fonts, | |
/nix/store/26iljhxqyc1ks056fphd8lfkjxg26k7l-font-adobe-100dpi-1.0.3/lib/X11/fonts/100dpi, | |
/nix/store/29b6gazpif8nzm4k5c2g3r783sp9nhhr-font-adobe-75dpi-1.0.3/lib/X11/fonts/75dpi | |
(**) ModulePath set to "/nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib,/nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/dri,/nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/gbm,/nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/gstreamer-1.0,/nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/libomxil-bellagio0,/nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/vdpau,/nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/xorg/modules,/nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/xorg/modules/extensions,/nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/xorg/modules/drivers,/nix/store/7c3yxc9pbcy1gzmqplvahhfx01qx44ax-xorg-server-1.18.4/lib/xorg/modules,/nix/store/7c3yxc9pbcy1gzmqplvahhfx01qx44ax-xorg-server-1.18.4/lib/xorg/modules/extensions,/nix/store/7c3yxc9pbcy1gzmqplvahhfx01qx44ax-xorg-server-1.18.4/lib/xorg/mo | |
(II) The server relies on udev to provide the list of input devices. | |
If no devices become available, reconfigure udev or disable AutoAddDevices. | |
(II) Loader magic: 0x822d20 | |
(II) Module ABI versions: | |
X.Org ANSI C Emulation: 0.4 | |
X.Org Video Driver: 20.0 | |
X.Org XInput driver : 22.1 | |
X.Org Server Extension : 9.0 | |
(++) using VT number 7 | |
(II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration | |
(II) xfree86: Adding drm device (/dev/dri/card1) | |
(II) xfree86: Adding drm device (/dev/dri/card0) | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
(--) PCI: (0:0:2:0) 8086:0412:1043:8534 rev 6, Mem @ 0xf7800000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 | |
(--) PCI:*(0:1:0:0) 1002:6939:1458:22bb rev 241, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xf7d00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072 | |
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) | |
(II) "glx" will be loaded by default. | |
(II) LoadModule: "glx" | |
(II) Loading /nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/xorg/modules/extensions/libglx.so | |
(II) Module glx: vendor="X.Org Foundation" | |
compiled for 1.18.0, module version = 1.0.0 | |
ABI class: X.Org Server Extension, version 9.0 | |
(==) AIGLX enabled | |
(II) LoadModule: "amdgpu" | |
(II) Loading /nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/xorg/modules/drivers/amdgpu_drv.so | |
(II) Module amdgpu: vendor="X.Org Foundation" | |
compiled for 1.18.4, module version = 1.2.99 | |
Module class: X.Org Video Driver | |
ABI class: X.Org Video Driver, version 20.0 | |
(II) AMDGPU: Driver for AMD Radeon: | |
All GPUs supported by the amdgpu kernel driver | |
(II) [KMS] Kernel modesetting enabled. | |
(II) AMDGPU(0): ShareFD: disabled | |
(DB) AMDGPU(0): open fd=10 | |
(II) AMDGPU(0): AMDGPU DDX hybrid version: 17.10.2 | |
(II) AMDGPU(0): AMDGPU kernel module hybrid version: 17.10.2 | |
(II) AMDGPU(0): Creating default Display subsection in Screen section | |
"Screen-amdgpu[0]" for depth/fbbpp 24/32 | |
(==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32 | |
(II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) | |
(==) AMDGPU(0): Default visual is TrueColor | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
(==) AMDGPU(0): RGB weight 888 | |
(II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC) | |
(--) AMDGPU(0): Chipset: "AMD Radeon (TM) R9 380 Series" (ChipID = 0x6939) | |
(II) Loading sub module "fb" | |
(II) LoadModule: "fb" | |
(II) Loading /nix/store/7c3yxc9pbcy1gzmqplvahhfx01qx44ax-xorg-server-1.18.4/lib/xorg/modules/libfb.so | |
(II) Module fb: vendor="X.Org Foundation" | |
compiled for 1.18.4, module version = 1.0.0 | |
ABI class: X.Org ANSI C Emulation, version 0.4 | |
(II) Loading sub module "dri2" | |
(II) LoadModule: "dri2" | |
(II) Module "dri2" already built-in | |
(II) Loading sub module "glamoregl" | |
(II) LoadModule: "glamoregl" | |
(II) Loading /nix/store/agvbcsaklkjr22vri4mpxk7mrjyy4jia-amdgpu-pro-17.10-4.9.66/lib/xorg/modules/libglamoregl.so | |
.(II) Module glamoregl: vendor="X.Org Foundation" | |
compiled for 1.18.4, module version = 1.0.0 | |
ABI class: X.Org ANSI C Emulation, version 0.4 | |
(II) glamor: OpenGL accelerated X.org driver based. | |
(II) glamor: EGL version 1.4: | |
r8169 0000:03:00.0 enp3s0: link up | |
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready | |
(II) AMDGPU(0): glamor detected, initialising EGL layer. | |
(II) AMDGPU(0): KMS Pageflipping: enabled | |
(II) AMDGPU(0): Output DisplayPort-0 has no monitor section | |
(II) AMDGPU(0): Output HDMI-A-2 has no monitor section | |
(II) AMDGPU(0): Output DVI-D-0 has no monitor section | |
(II) AMDGPU(0): Output DVI-D-1 has no monitor section | |
(II) AMDGPU(0): EDID for output DisplayPort-0 | |
(II) AMDGPU(0): EDID for output HDMI-A-2 | |
(II) AMDGPU(0): EDID for output DVI-D-0 | |
(II) AMDGPU(0): EDID for output DVI-D-1 | |
(II) AMDGPU(0): Manufacturer: GSM Model: 597c Serial#: 46281 | |
(II) AMDGPU(0): Year: 2013 Week: 9 | |
(II) AMDGPU(0): EDID Version: 1.3 | |
(II) AMDGPU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V | |
(II) AMDGPU(0): Sync: Separate Composite | |
(II) AMDGPU(0): Max Image Size [cm]: horiz.: 48 vert.: 27 | |
(II) AMDGPU(0): Gamma: 2.20 | |
(II) AMDGPU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display | |
(II) AMDGPU(0): First detailed timing is preferred mode | |
(II) AMDGPU(0): redX: 0.637 redY: 0.331 greenX: 0.309 greenY: 0.620 | |
(II) AMDGPU(0): blueX: 0.152 blueY: 0.069 whiteX: 0.313 whiteY: 0.329 | |
(II) AMDGPU(0): Supported established timings: | |
(II) AMDGPU(0): 720x400@70Hz | |
(II) AMDGPU(0): 640x480@60Hz | |
(II) AMDGPU(0): 640x480@75Hz | |
(II) AMDGPU(0): 800x600@56Hz | |
(II) AMDGPU(0): 800x600@60Hz | |
(II) AMDGPU(0): 800x600@75Hz | |
(II) AMDGPU(0): 832x624@75Hz | |
(II) AMDGPU(0): 1024x768@60Hz | |
(II) AMDGPU(0): 1024x768@75Hz | |
(II) AMDGPU(0): 1280x1024@75Hz | |
(II) AMDGPU(0): 1152x864@75Hz | |
(II) AMDGPU(0): Manufacturer's mask: 0 | |
(II) AMDGPU(0): Supported standard timings: | |
(II) AMDGPU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 | |
(II) AMDGPU(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281 | |
(II) AMDGPU(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129 | |
(II) AMDGPU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 | |
(II) AMDGPU(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149 | |
(II) AMDGPU(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528 | |
(II) AMDGPU(0): #6: hsize: 1600 vsize 900 refresh: 60 vid: 49321 | |
(II) AMDGPU(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179 | |
(II) AMDGPU(0): Supported detailed timing: | |
(II) AMDGPU(0): clock: 148.5 MHz Image Size: 480 x 270 mm | |
(II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 | |
(II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 | |
(II) AMDGPU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz | |
(II) AMDGPU(0): Monitor name: 22EN33 | |
(II) AMDGPU(0): Serial No: 309NDWE1C281 | |
(II) AMDGPU(0): EDID (in hex): | |
(II) AMDGPU(0): 00ffffffffffff001e6d7c59c9b40000 | |
(II) AMDGPU(0): 091701036c301b78ea3335a3544f9e27 | |
(II) AMDGPU(0): 115054a76b80714f81c0810081809500 | |
(II) AMDGPU(0): 9040a9c0b300023a801871382d40582c | |
(II) AMDGPU(0): 4500e00e1100001e000000fd00384b1e | |
(II) AMDGPU(0): 530f000a202020202020000000fc0032 | |
(II) AMDGPU(0): 32454e33330a202020202020000000ff | |
(II) AMDGPU(0): 003330394e44574531433238310a008f | |
(II) AMDGPU(0): Printing probed modes for output DVI-D-1 | |
(II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) | |
(II) AMDGPU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) | |
(II) AMDGPU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) | |
(II) AMDGPU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e) | |
(II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) | |
(II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) | |
(II) AMDGPU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) | |
(II) AMDGPU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) | |
(II) AMDGPU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) | |
(II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) | |
(II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) | |
(II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) | |
(II) AMDGPU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) | |
(II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) | |
(II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) | |
(II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) | |
(II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) | |
(II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) | |
(II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) | |
(II) AMDGPU(0): Output DisplayPort-0 disconnected | |
(II) AMDGPU(0): Output HDMI-A-2 disconnected | |
(II) AMDGPU(0): Output DVI-D-0 disconnected | |
(II) AMDGPU(0): Output DVI-D-1 connected | |
(II) AMDGPU(0): Using exact sizes for initial modes | |
(II) AMDGPU(0): Output DVI-D-1 using initial mode 1920x1080 +0+0 | |
(II) AMDGPU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. | |
(II) AMDGPU(0): mem size init: gart size :ffe3d000 vram size: s:fecb4000 visible:bf187000 | |
(II) AMDGPU(0): Video RAM: 4174544 kByte | |
(==) AMDGPU(0): DPI set to (96, 96) | |
(II) Loading sub module "ramdac" | |
(II) LoadModule: "ramdac" | |
(II) Module "ramdac" already built-in | |
(--) Depth 24 pixmap format is 32 bpp | |
(II) AMDGPU(0): [DRI2] Setup complete | |
(II) AMDGPU(0): [DRI2] DRI driver: amdgpu | |
(II) AMDGPU(0): [DRI2] VDPAU driver: amdgpu | |
(II) AMDGPU(0): Front buffer pitch: 8192 bytes | |
(II) AMDGPU(0): SYNC extension fences enabled | |
(II) AMDGPU(0): Present extension enabled | |
(==) AMDGPU(0): DRI3 enabled | |
(==) AMDGPU(0): Backing store enabled | |
(II) AMDGPU(0): Direct rendering enabled | |
(II) AMDGPU(0): Use GLAMOR acceleration. | |
(II) AMDGPU(0): Acceleration enabled | |
(==) AMDGPU(0): DPMS enabled | |
(==) AMDGPU(0): Silken mouse enabled | |
(II) AMDGPU(0): Set up textured video (glamor) | |
(II) AMDGPU(0): RandR 1.2 enabled, ignore the following RandR disabled message. | |
(--) RandR disabled | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer | |
(II) AIGLX: enabled GLX_ARB_create_context | |
(II) AIGLX: enabled GLX_ARB_create_context_profile | |
(II) AIGLX: enabled GLX_EXT_create_context_es2_profile | |
(II) AIGLX: enabled GLX_INTEL_swap_event | |
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control | |
(II) AIGLX: enabled GLX_EXT_framebuffer_sRGB | |
(II) AIGLX: enabled GLX_ARB_fbconfig_float | |
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects | |
(II) AIGLX: Loaded and initialized amdgpu | |
(II) GLX: Initialized DRI2 GL provider for screen 0 | |
(II) AMDGPU(0): Setting screen physical size to 508 x 285 | |
(II) config/udev: Adding input device Power Button (/dev/input/event4) | |
(**) Power Button: Applying InputClass "Keyboard catchall" | |
(**) Power Button: Applying InputClass "evdev keyboard catchall" | |
(**) Power Button: Applying InputClass "libinput keyboard catchall" | |
(II) LoadModule: "libinput" | |
(II) Loading /nix/store/ar2hkyacwqbpg18izl5z3yy2ssfzaf4a-xf86-input-libinput-0.26.0/lib/xorg/modules/input/libinput_drv.so | |
(II) Module libinput: vendor="X.Org Foundation" | |
compiled for 1.18.4, module version = 0.26.0 | |
Module class: X.Org XInput Driver | |
ABI class: X.Org XInput driver, version 22.1 | |
(II) Using input driver 'libinput' for 'Power Button' | |
(**) Power Button: always reports core events | |
(**) Option "Device" "/dev/input/event4" | |
(**) Option "_source" "server/udev" | |
(II) event4 - (II) Power Button: (II) is tagged by udev as: Keyboard | |
(II) event4 - (II) Power Button: (II) device is a keyboard | |
(II) event4 - (II) Power Button: (II) device removed | |
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4" | |
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) | |
(**) Option "xkb_model" "pc104" | |
(**) Option "xkb_layout" "hu" | |
(WW) Option "xkb_variant" requires a string value | |
(**) Option "xkb_options" "terminate:ctrl_alt_bksp" | |
(II) event4 - (II) Power Button: (II) is tagged by udev as: Keyboard | |
(II) event4 - (II) Power Button: (II) device is a keyboard | |
(II) config/udev: Adding input device Video Bus (/dev/input/event5) | |
(**) Video Bus: Applying InputClass "Keyboard catchall" | |
(**) Video Bus: Applying InputClass "evdev keyboard catchall" | |
(**) Video Bus: Applying InputClass "libinput keyboard catchall" | |
(II) Using input driver 'libinput' for 'Video Bus' | |
(**) Video Bus: always reports core events | |
(**) Option "Device" "/dev/input/event5" | |
(**) Option "_source" "server/udev" | |
(II) event5 - (II) Video Bus: (II) is tagged by udev as: Keyboard | |
(II) event5 - (II) Video Bus: (II) device is a keyboard | |
(II) event5 - (II) Video Bus: (II) device removed | |
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5" | |
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) | |
(**) Option "xkb_model" "pc104" | |
(**) Option "xkb_layout" "hu" | |
(WW) Option "xkb_variant" requires a string value | |
(**) Option "xkb_options" "terminate:ctrl_alt_bksp" | |
(II) event5 - (II) Video Bus: (II) is tagged by udev as: Keyboard | |
(II) event5 - (II) Video Bus: (II) device is a keyboard | |
(II) config/udev: Adding input device Power Button (/dev/input/event3) | |
(**) Power Button: Applying InputClass "Keyboard catchall" | |
(**) Power Button: Applying InputClass "evdev keyboard catchall" | |
(**) Power Button: Applying InputClass "libinput keyboard catchall" | |
(II) Using input driver 'libinput' for 'Power Button' | |
(**) Power Button: always reports core events | |
(**) Option "Device" "/dev/input/event3" | |
(**) Option "_source" "server/udev" | |
(II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard | |
(II) event3 - (II) Power Button: (II) device is a keyboard | |
(II) event3 - (II) Power Button: (II) device removed | |
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3" | |
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) | |
(**) Option "xkb_model" "pc104" | |
(**) Option "xkb_layout" "hu" | |
(WW) Option "xkb_variant" requires a string value | |
(**) Option "xkb_options" "terminate:ctrl_alt_bksp" | |
(II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard | |
(II) event3 - (II) Power Button: (II) device is a keyboard | |
(II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15) | |
(II) No input driver specified, ignoring this device. | |
(II) This device may have been added with another device file. | |
(II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event16) | |
(II) No input driver specified, ignoring this device. | |
(II) This device may have been added with another device file. | |
(II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17) | |
(II) No input driver specified, ignoring this device. | |
(II) This device may have been added with another device file. | |
(II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event18) | |
(II) No input driver specified, ignoring this device. | |
(II) This device may have been added with another device file. | |
(II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event19) | |
(II) No input driver specified, ignoring this device. | |
(II) This device may have been added with another device file. | |
(II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event20) | |
(II) No input driver specified, ignoring this device. | |
(II) This device may have been added with another device file. | |
(II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event7) | |
(II) No input driver specified, ignoring this device. | |
(II) This device may have been added with another device file. | |
(II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event8) | |
(II) No input driver specified, ignoring this device. | |
(II) This device may have been added with another device file. | |
(II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event6) | |
(II) No input driver specified, ignoring this device. | |
(II) This device may have been added with another device file. | |
(II) config/udev: Adding input device MOON AND (/dev/input/event0) | |
(**) MOON AND : Applying InputClass "evdev pointer catchall" | |
(**) MOON AND : Applying InputClass "libinput pointer catchall" | |
(II) Using input driver 'libinput' for 'MOON AND ' | |
(**) MOON AND : always reports core events | |
(**) Option "Device" "/dev/input/event0" | |
(**) Option "_source" "server/udev" | |
(II) event0 - (II) MOON AND : (II) is tagged by udev as: Mouse | |
(II) event0 - (II) MOON AND : (II) device is a pointer | |
(II) event0 - (II) MOON AND : (II) device removed | |
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/0003:13EE:0001.0001/input/input2/event0" | |
(II) XINPUT: Adding extended input device "MOON AND " (type: MOUSE, id 9) | |
(**) Option "AccelerationScheme" "none" | |
(**) MOON AND : (accel) selected scheme none/0 | |
(**) MOON AND : (accel) acceleration factor: 2.000 | |
(**) MOON AND : (accel) acceleration threshold: 4 | |
(II) event0 - (II) MOON AND : (II) is tagged by udev as: Mouse | |
(II) event0 - (II) MOON AND : (II) device is a pointer | |
(II) config/udev: Adding input device MOON AND (/dev/input/mouse0) | |
(II) No input driver specified, ignoring this device. | |
(II) This device may have been added with another device file. | |
(II) config/udev: Adding input device HID 1267:0103 (/dev/input/event1) | |
(**) HID 1267:0103: Applying InputClass "Keyboard catchall" | |
(**) HID 1267:0103: Applying InputClass "evdev keyboard catchall" | |
(**) HID 1267:0103: Applying InputClass "libinput keyboard catchall" | |
(II) Using input driver 'libinput' for 'HID 1267:0103' | |
(**) HID 1267:0103: always reports core events | |
(**) Option "Device" "/dev/input/event1" | |
(**) Option "_source" "server/udev" | |
(II) event1 - (II) HID 1267:0103: (II) is tagged by udev as: Keyboard | |
(II) event1 - (II) HID 1267:0103: (II) device is a keyboard | |
(II) event1 - (II) HID 1267:0103: (II) device removed | |
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:1267:0103.0002/input/input3/event1" | |
(II) XINPUT: Adding extended input device "HID 1267:0103" (type: KEYBOARD, id 10) | |
(**) Option "xkb_model" "pc104" | |
(**) Option "xkb_layout" "hu" | |
(WW) Option "xkb_variant" requires a string value | |
(**) Option "xkb_options" "terminate:ctrl_alt_bksp" | |
(II) event1 - (II) HID 1267:0103: (II) is tagged by udev as: Keyboard | |
(II) event1 - (II) HID 1267:0103: (II) device is a keyboard | |
(II) config/udev: Adding input device HID 1267:0103 (/dev/input/event2) | |
(**) HID 1267:0103: Applying InputClass "Keyboard catchall" | |
(**) HID 1267:0103: Applying InputClass "evdev keyboard catchall" | |
(**) HID 1267:0103: Applying InputClass "libinput keyboard catchall" | |
(II) Using input driver 'libinput' for 'HID 1267:0103' | |
(**) HID 1267:0103: always reports core events | |
(**) Option "Device" "/dev/input/event2" | |
(**) Option "_source" "server/udev" | |
(II) event2 - (II) HID 1267:0103: (II) is tagged by udev as: Keyboard | |
(II) event2 - (II) HID 1267:0103: (II) device is a keyboard | |
(II) event2 - (II) HID 1267:0103: (II) device removed | |
(II) libinput: HID 1267:0103: needs a virtual subdevice | |
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:1267:0103.0003/input/input4/event2" | |
(II) XINPUT: Adding extended input device "HID 1267:0103" (type: MOUSE, id 11) | |
(**) Option "AccelerationScheme" "none" | |
(**) HID 1267:0103: (accel) selected scheme none/0 | |
(**) HID 1267:0103: (accel) acceleration factor: 2.000 | |
(**) HID 1267:0103: (accel) acceleration threshold: 4 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe20f4aa0 | |
[drm] Atomic commit: RESET. crtc id 0:[ffff8ce3e20ed000] | |
[drm] dc_commit_targets: 0 targets | |
[drm] Atomic commit: SET crtc id 0: [ffff8ce3e20ed000] | |
[drm] dc_commit_targets: 1 targets | |
[drm] core_target 0xe35bb0a0: stream_count=1 | |
[drm] core_stream 0xd36de800: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080; | |
[drm] pix_clk_khz: 148500, h_total: 2200, v_total: 1125 | |
[drm] sink name: 22EN33, serial: 46281 | |
[drm] link: 3 | |
[drm] dce_get_required_clocks_state: clocks unsupported | |
[drm] [Mode] [DDVI][ConnIdx:3] {1920x1080, 2200x1125@148500Khz}^ | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe35bb0a0 | |
display-manager.service: Service hold-off time over, scheduling restart. | |
Stopped X11 Server. | |
Starting X11 Server... | |
Started X11 Server. | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe35bb0a0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe35bb0a0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe35bb0a0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe35bb0a0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe35bb0a0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe35bb0a0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe35bb0a0 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xe35bb0a0 | |
[drm] Atomic commit: RESET. crtc id 0:[ffff8ce3e20ed000] | |
[drm] dc_commit_targets: 0 targets | |
[drm] Atomic commit: SET crtc id 0: [ffff8ce3e20ed000] | |
[drm] dc_commit_targets: 1 targets | |
[drm] core_target 0xda9c9200: stream_count=1 | |
[drm] core_stream 0xdbeeb400: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080; | |
[drm] pix_clk_khz: 148500, h_total: 2200, v_total: 1125 | |
[drm] sink name: 22EN33, serial: 46281 | |
[drm] link: 3 | |
[drm] dce_get_required_clocks_state: clocks unsupported | |
[drm] [Mode] [DDVI][ConnIdx:3] {1920x1080, 2200x1125@148500Khz}^ | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xda9c9200 | |
display-manager.service: Service hold-off time over, scheduling restart. | |
Stopped X11 Server. | |
Starting X11 Server... | |
Started X11 Server. | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xda9c9200 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xda9c9200 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xda9c9200 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xda9c9200 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xda9c9200 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xda9c9200 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xda9c9200 | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xda9c9200 | |
[drm] Atomic commit: RESET. crtc id 0:[ffff8ce3e20ed000] | |
[drm] dc_commit_targets: 0 targets | |
[drm] Atomic commit: SET crtc id 0: [ffff8ce3e20ed000] | |
[drm] dc_commit_targets: 1 targets | |
[drm] core_target 0xda9c9520: stream_count=1 | |
[drm] core_stream 0xdd782000: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080; | |
[drm] pix_clk_khz: 148500, h_total: 2200, v_total: 1125 | |
[drm] sink name: 22EN33, serial: 46281 | |
[drm] link: 3 | |
[drm] dce_get_required_clocks_state: clocks unsupported | |
[drm] [Mode] [DDVI][ConnIdx:3] {1920x1080, 2200x1125@148500Khz}^ | |
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xda9c9520 | |
Suppressed 908 messages from /system.slice/display-manager.service | |
slim: waiting for X server to shut down | |
display-manager.service: Service hold-off time over, scheduling restart. | |
Stopped X11 Server. | |
display-manager.service: Start request repeated too quickly. | |
Failed to start X11 Server. | |
display-manager.service: Unit entered failed state. | |
display-manager.service: Failed with result 'start-limit-hit'. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment