Last active
September 15, 2021 13:48
-
-
Save MrNegativeTW/7eba20d6c20065b49408b1d057c0523b to your computer and use it in GitHub Desktop.
TP-Link Archer C7 V2 - iw phy command
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| root@OpenWrt:~# iw phy | |
| Wiphy phy1 | |
| max # scan SSIDs: 4 | |
| max scan IEs length: 2257 bytes | |
| max # sched scan SSIDs: 0 | |
| max # match sets: 0 | |
| max # scan plans: 1 | |
| max scan plan interval: -1 | |
| max scan plan iterations: 0 | |
| Retry short limit: 7 | |
| Retry long limit: 4 | |
| Coverage class: 0 (up to 0m) | |
| Device supports AP-side u-APSD. | |
| Device supports T-DLS. | |
| Available Antennas: TX 0x7 RX 0x7 | |
| Configured Antennas: TX 0x7 RX 0x7 | |
| Supported interface modes: | |
| * IBSS | |
| * managed | |
| * AP | |
| * AP/VLAN | |
| * monitor | |
| * mesh point | |
| * P2P-client | |
| * P2P-GO | |
| * outside context of a BSS | |
| Band 1: | |
| Capabilities: 0x11ef | |
| RX LDPC | |
| HT20/HT40 | |
| SM Power Save disabled | |
| RX HT20 SGI | |
| RX HT40 SGI | |
| TX STBC | |
| RX STBC 1-stream | |
| Max AMSDU length: 3839 bytes | |
| DSSS/CCK HT40 | |
| Maximum RX AMPDU length 65535 bytes (exponent: 0x003) | |
| Minimum RX AMPDU time spacing: 8 usec (0x06) | |
| HT TX/RX MCS rate indexes supported: 0-23 | |
| Frequencies: | |
| * 2412 MHz [1] (25.0 dBm) | |
| * 2417 MHz [2] (25.0 dBm) | |
| * 2422 MHz [3] (25.0 dBm) | |
| * 2427 MHz [4] (25.0 dBm) | |
| * 2432 MHz [5] (25.0 dBm) | |
| * 2437 MHz [6] (25.0 dBm) | |
| * 2442 MHz [7] (25.0 dBm) | |
| * 2447 MHz [8] (25.0 dBm) | |
| * 2452 MHz [9] (25.0 dBm) | |
| * 2457 MHz [10] (25.0 dBm) | |
| * 2462 MHz [11] (25.0 dBm) | |
| * 2467 MHz [12] (25.0 dBm) | |
| * 2472 MHz [13] (25.0 dBm) | |
| * 2484 MHz [14] (disabled) | |
| valid interface combinations: | |
| * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1, | |
| total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz } | |
| HT Capability overrides: | |
| * MCS: ff ff ff ff ff ff ff ff ff ff | |
| * maximum A-MSDU length | |
| * supported channel width | |
| * short GI for 40 MHz | |
| * max A-MPDU length exponent | |
| * min MPDU start spacing | |
| Supported extended features: | |
| * [ RRM ]: RRM | |
| * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records | |
| * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 | |
| * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs | |
| Wiphy phy0 | |
| max # scan SSIDs: 16 | |
| max scan IEs length: 199 bytes | |
| max # sched scan SSIDs: 0 | |
| max # match sets: 0 | |
| max # scan plans: 1 | |
| max scan plan interval: -1 | |
| max scan plan iterations: 0 | |
| Retry short limit: 7 | |
| Retry long limit: 4 | |
| Coverage class: 0 (up to 0m) | |
| Device supports AP-side u-APSD. | |
| Available Antennas: TX 0x7 RX 0x7 | |
| Configured Antennas: TX 0x7 RX 0x7 | |
| Supported interface modes: | |
| * IBSS | |
| * managed | |
| * AP | |
| * monitor | |
| * mesh point | |
| * P2P-client | |
| * P2P-GO | |
| * P2P-device | |
| Band 2: | |
| Capabilities: 0x19ef | |
| RX LDPC | |
| HT20/HT40 | |
| SM Power Save disabled | |
| RX HT20 SGI | |
| RX HT40 SGI | |
| TX STBC | |
| RX STBC 1-stream | |
| Max AMSDU length: 7935 bytes | |
| DSSS/CCK HT40 | |
| Maximum RX AMPDU length 65535 bytes (exponent: 0x003) | |
| Minimum RX AMPDU time spacing: 8 usec (0x06) | |
| HT TX/RX MCS rate indexes supported: 0-23 | |
| VHT Capabilities (0x338001b2): | |
| Max MPDU length: 11454 | |
| Supported Channel Width: neither 160 nor 80+80 | |
| RX LDPC | |
| short GI (80 MHz) | |
| TX STBC | |
| RX antenna pattern consistency | |
| TX antenna pattern consistency | |
| VHT RX MCS set: | |
| 1 streams: MCS 0-9 | |
| 2 streams: MCS 0-9 | |
| 3 streams: MCS 0-9 | |
| 4 streams: not supported | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| VHT RX highest supported: 0 Mbps | |
| VHT TX MCS set: | |
| 1 streams: MCS 0-9 | |
| 2 streams: MCS 0-9 | |
| 3 streams: MCS 0-9 | |
| 4 streams: not supported | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| VHT TX highest supported: 0 Mbps | |
| Frequencies: | |
| * 5180 MHz [36] (23.0 dBm) | |
| * 5200 MHz [40] (23.0 dBm) | |
| * 5220 MHz [44] (23.0 dBm) | |
| * 5240 MHz [48] (23.0 dBm) | |
| * 5260 MHz [52] (23.0 dBm) (radar detection) | |
| * 5280 MHz [56] (23.0 dBm) (radar detection) | |
| * 5300 MHz [60] (23.0 dBm) (radar detection) | |
| * 5320 MHz [64] (23.0 dBm) (radar detection) | |
| * 5500 MHz [100] (23.0 dBm) (radar detection) | |
| * 5520 MHz [104] (23.0 dBm) (radar detection) | |
| * 5540 MHz [108] (23.0 dBm) (radar detection) | |
| * 5560 MHz [112] (23.0 dBm) (radar detection) | |
| * 5580 MHz [116] (23.0 dBm) (radar detection) | |
| * 5600 MHz [120] (23.0 dBm) (radar detection) | |
| * 5620 MHz [124] (23.0 dBm) (radar detection) | |
| * 5640 MHz [128] (23.0 dBm) (radar detection) | |
| * 5660 MHz [132] (23.0 dBm) (radar detection) | |
| * 5680 MHz [136] (23.0 dBm) (radar detection) | |
| * 5700 MHz [140] (23.0 dBm) (radar detection) | |
| * 5720 MHz [144] (disabled) | |
| * 5745 MHz [149] (30.0 dBm) | |
| * 5765 MHz [153] (30.0 dBm) | |
| * 5785 MHz [157] (30.0 dBm) | |
| * 5805 MHz [161] (30.0 dBm) | |
| * 5825 MHz [165] (30.0 dBm) | |
| * 5845 MHz [169] (disabled) | |
| * 5865 MHz [173] (disabled) | |
| valid interface combinations: | |
| * #{ managed, P2P-client } <= 16, #{ P2P-GO } <= 3, #{ AP } <= 16, #{ IBSS } <= 1, | |
| total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz } | |
| HT Capability overrides: | |
| * MCS: ff ff ff ff ff ff ff ff ff ff | |
| * maximum A-MSDU length | |
| * supported channel width | |
| * short GI for 40 MHz | |
| * max A-MPDU length exponent | |
| * min MPDU start spacing | |
| Supported extended features: | |
| * [ VHT_IBSS ]: VHT-IBSS | |
| * [ RRM ]: RRM | |
| * [ SET_SCAN_DWELL ]: scan dwell setting | |
| * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records | |
| * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 | |
| * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| https://forum.openwrt.org/t/router-with-monitor-and-promiscuous-mode/46469 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment