opensuse log with usb disk install

[    7.708974] evm: HMAC attrs: 0x1
[    7.741822] Freeing unused kernel memory: 6720K
[    7.797394] Run /init as init process
00:00:07 <4>: = config file [flags 0x06] =
00:00:07 <4>: = config file [flags 0x04] =
00:00:07 <4>: = config file [flags 0x04] =
00:00:07 <4>: = config file [flags 0x04] =
00:00:07 <2>: Moving into zram...
[    7.923765] zram: Added device: zram0
[    7.933393] zram0: detected capacity change from 0 to 2097152
00:00:09 <2>: mount: dev = /dev/z[    9.990150] EXT4-fs (zram0): mounting ext2 file system using the ext4 subsystem
ram0, dir = /.newroot, flags = 0x[   10.003026] EXT4-fs (zram0): mounted filesystem without journal. Opts: (null). Quota mode: none.
0
00:00:09 <2>: /dev/zram0: type = ext2.
00:00:11 <2>:  done.
00:00:11 <2>: exec: /bin/rm -r /lib /dev /bin /sbin /usr /etc /init /lbin = 0
[   12.557038] random: fast init done
[   13.848336] loop: module loaded
[   14.170916] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   14.457846] loop0: detected capacity change from 0 to 209408
[   15.236728] loop1: detected capacity change from 0 to 25216

>>> openSUSE Tumbleweed installation program v8.0.0 (c) 1996-2021 SUSE LLC  <<<
00:00:15 <2>: ===  linuxrc 8.0.0 - 1970-01-01 00:00:15  ===
00:00:15 <4>: = config file [flags 0x800] =
00:00:15 <2>:   key 0 "BOOT_IMAGE", value 0 "/boot/aarch64/linux", raw "BOOT_IMAGE=/boot/aarch64/linux"
00:00:15 <2>:   key 0 "splash", value 0 "silent", raw "splash=silent"
00:00:15 <2>:   key 0 "linuxrc.log", value 0 "/dev/console", raw "linuxrc.log=/dev/console"
00:00:15 <2>:   key 0 "linemode", value 0 "", raw "linemode"
00:00:15 <2>:   key 0 "linuxrc.debug", value 3 "3", raw "linuxrc.debug=3"
Starting udev... 00:00:15 <1>: Starting udev...
[   16.004742] alua: device handler registered
[   16.027356] emc: device handler registered
[   16.058465] rdac: device handler registered
[   18.060165] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc@0/30000000.bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0
[   18.134309] gpio-144 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[   18.167797] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator
[   18.180750] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator
[   18.190052] i2c i2c-1: IMX I2C adapter registered
[   18.197316] gpio-146 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[   18.209147] pca953x 2-0020: supply vcc not found, using dummy regulator
[   18.227209] pps pps0: new PPS source ptp0
[   18.234716] libphy: fec_enet_mii_bus: probed
[   18.241662] pca953x 2-0020: using no AI
[   18.270125] i2c i2c-2: IMX I2C adapter registered
[   18.275945] sdhci: Secure Digital Host Controller Interface driver
[   18.282275] sdhci: Copyright(c) Pierre Ossman
[   18.341025] sdhci-pltfm: SDHCI platform and OF driver helper
[   18.356993] fec: probe of 30be0000.ethernet failed with error -16
[   18.370658] cryptd: max_cpu_qlen set to 1000
[   18.395865] mmc1: CQHCI version 5.10
[   18.399798] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO
[   18.406295] mmc2: CQHCI version 5.10
[   18.464257] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA
[   18.480583] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[   18.674430] mmc2: Command Queue Engine enabled
[   18.679615] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[   19.127077] mmcblk2: mmc2:0001 DG4032 29.1 GiB
[   19.131948] mmcblk2boot0: mmc2:0001 DG4032 partition 1 4.00 MiB
[   19.138463] mmcblk2boot1: mmc2:0001 DG4032 partition 2 4.00 MiB
[   19.145811] mmcblk2rpmb: mmc2:0001 DG4032 partition 3 4.00 MiB, chardev (235:0)
[   19.169510]  mmcblk2: p1 p2 p3
[   19.187415] adv7511 1-003d: supply avdd not found, using dummy regulator
[   19.194548] adv7511 1-003d: supply dvdd not found, using dummy regulator
[   19.201620] adv7511 1-003d: supply pvdd not found, using dummy regulator
[   19.208608] adv7511 1-003d: supply a2vdd not found, using dummy regulator
[   19.215655] adv7511 1-003d: supply v3p3 not found, using dummy regulator
[   19.222625] adv7511 1-003d: supply v1p2 not found, using dummy regulator
00:00:19 <2>: exec: /scripts/udev_setup = 0
00:00:19 <4>: stdout + stderr:
Starting udevd /scripts/udev_setup: line 48: /sys/class/fc/fc_udev_device/nvme_discovery: No such file or directory
ok
00:00:19 <1>: ok
[   20.281595] random: crng init done
[   20.592676] RPC: Registered named UNIX socket transport module.
[   20.598703] RPC: Registered udp transport module.
[   20.603433] RPC: Registered tcp transport module.
[   20.608177] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   23.685911] No iBFT detected.
00:00:23 <2>: exec: /scripts/early_setup = 0
00:00:23 <4>: stdout + stderr:
haveged: command socket is listening at fd 6
gpg: key E3A5C360307E3D54 was created 13228 days in the future (time warp or clock problem)
gpg: key E3A5C360307E3D54 was created 13228 days in the future (time warp or clock problem)
gpg: /root/.gnupg/trustdb.gpg: trustdb created
gpg: key E3A5C360307E3D54 was created 13228 days in the future (time warp or clock problem)
gpg: key E3A5C360307E3D54: public key "SuSE Package Signing Key <build@suse.de>" imported
gpg: key 70AF9E8139DB7C82 was created 15736 days in the future (time warp or clock problem)
gpg: key 70AF9E8139DB7C82 was created 15736 days in the future (time warp or clock problem)
gpg: key 70AF9E8139DB7C82 was created 15736 days in the future (time warp or clock problem)
gpg: key 70AF9E8139DB7C82: public key "SuSE Package Signing Key <build@suse.de>" imported
gpg: key B88B2FD43DBDC284 was created 14190 days in the future (time warp or clock problem)
gpg: key B88B2FD43DBDC284 was created 14190 days in the future (time warp or clock problem)
gpg: key B88B2FD43DBDC284 was created 14190 days in the future (time warp or clock problem)
gpg: key B88B2FD43DBDC284: public key "openSUSE Project Signing Key <opensuse@opensuse.org>" imported
gpg: Total number processed: 3
gpg:               imported: 3
Mounting rpc_pipefs on /var/lib/nfs/rpc_pipefs
Starting rpc.idmapd
Starting dbus-daemon
Starting wicked
00:00:23 <4>: = config file [flags 0x01] =
00:00:23 <2>:   key 224 "ibftdevices", value 0 "", raw ""
00:00:23 <2>: re-parsing url: disk:/autoinst.xml?device=*label/OEMDRV&quiet=1
00:00:23 <4>: url = disk:/autoinst.xml?device=*label/OEMDRV&quiet=1
00:00:23 <4>:   scheme = disk (17), orig scheme = disk (17)
00:00:23 <4>: , path = "/autoinst.xml"
00:00:23 <4>:
00:00:23 <4>:   device = "*label/OEMDRV"
00:00:23 <4>:
00:00:23 <4>:   network = 0, blockdev = 1, mountable = 1, file = 0, dir = 0, all = 0, quiet = 1
00:00:23 <4>:   query:
00:00:23 <4>:     device = "*label/OEMDRV"
00:00:23 <4>:     quiet = "1"
00:00:23 <4>: url (zypp format) = hd:/autoinst.xml
00:00:23 <4>: url (ay format) = device:///autoinst.xml
00:00:25 <2>: Console: /dev/ttyS1, serial line params "ttyS1"
00:00:25 <2>: error setting kbd mode: Input/output error
00:00:25 <2>: Window size: 80 x 24
00:00:25 <2>: exec: /scripts/plymouth_setup = 0
00:00:25 <2>: exec: /scripts/plymouth_setup = 0
00:00:25 <2>: exec: /usr/bin/plymouth change-mode --system-upgrade = 0
00:00:25 <2>: exec: /usr/bin/plymouth system-update --progress=0 = 0
00:00:25 <2>: CPU: 0, Memory: 1372616
00:00:25 <1>: Loading basic drivers...
Loading basic drivers
00:00:25 <2>: exec: /usr/bin/plymouth display-message --text="Loading basic drivers" = 0
00:00:25 <4>: mod_insmod(af_packet, )
00:00:26 <2>: exec: insmod /modules/af_packet.ko.xz = 0
00:00:27 <4>: mod_insmod(nls_cp437, )
00:00:28 <2>: exec: insmod /modules/nls_cp437.ko.xz = 0
00:00:29 <4>: mod_insmod(nls_iso8859-1, )
00:00:30 <2>: exec: insmod /modules/nls_iso8859-1.ko.xz = 0
00:00:31 <4>: mod_insmod(fscache, )
00:00:32 <2>: exec: insmod /modules/fscache.ko.xz = 0
00:00:33 <4>: mod_insmod(nfs_ssc, )
00:00:34 <2>: exec: insmod /modules/nfs_ssc.ko.xz = 0
00:00:34 <4>: mod_insmod(grace, )
00:00:35 <2>: exec: insmod /modules/grace.ko.xz = 0
00:00:36 <4>: mod_insmod(lockd, )
00:00:37 <2>: exec: insmod /modules/lockd.ko.xz = 0
00:00:38 <4>: mod_insmod(nfs, )
00:00:39 <2>: exec: insmod /modules/nfs.ko.xz = 0
00:00:40 <4>: mod_insmod(loop, max_loop=64)
00:00:40 <4>: mod_insmod(efivarfs, )
00:00:40 <4>: mod_insmod(llc, )
00:00:41 <2>: exec: insmod /modules/llc.ko.xz = 0
00:00:42 <4>: mod_insmod(stp, )
00:00:43 <2>: exec: insmod /modules/stp.ko.xz = 0
00:00:44 <4>: mod_insmod(mrp, )
00:00:45 <2>: exec: insmod /modules/mrp.ko.xz = 0
00:00:46 <4>: mod_insmod(garp, )
00:00:46 <2>: exec: insmod /modules/garp.ko.xz = 0
00:00:47 <4>: mod_insmod(8021q, )
00:00:48 <2>: exec: insmod /modules/8021q.ko.xz = 0
00:00:49 <4>: mod_insmod(dm-mod, )
00:00:50 <2>: exec: insmod /modules/dm-mod.ko.xz = 0
00:00:51 <4>: mod_insmod(dm-multipath, )
00:00:52 <2>: exec: insmod /modules/dm-multipath.ko.xz = 0
00:00:53 <4>: mod_insmod(libcrc32c, )
00:00:54 <2>: exec: insmod /modules/libcrc32c.ko.xz = 0
00:00:55 <4>: mod_insmod(raid6_pq, )
00:00:58 <2>: exec: insmod /modules/raid6_pq.ko.xz = 0
00:00:59 <4>: mod_insmod(xor-neon, )
00:01:00 <2>: exec: insmod /modules/xor-neon.ko.xz = 0
00:01:01 <4>: mod_insmod(xor, )
00:01:02 <2>: exec: insmod /modules/xor.ko.xz = 0
00:01:03 <4>: mod_insmod(btrfs, )
00:01:04 <2>: exec: insmod /modules/btrfs.ko.xz = 0
00:01:05 <1>:  ok
00:01:06 <4>: = config file [flags 0x80] =
00:01:06 <2>:   key 0 "BOOT_IMAGE", value 0 "/boot/aarch64/linux", raw "BOOT_IMAGE=/boot/aarch64/linux"
00:01:06 <2>:   key 0 "splash", value 0 "silent", raw "splash=silent"
00:01:06 <2>:   key 0 "linuxrc.log", value 0 "/dev/console", raw "linuxrc.log=/dev/console"
00:01:06 <2>:   key 0 "linemode", value 0 "", raw "linemode"
00:01:06 <2>:   key 0 "linuxrc.debug", value 3 "3", raw "linuxrc.debug=3"
00:01:06 <4>: efi = 1
00:01:06 <4>: fcoe_check: no edd
00:01:06 <4>: wicked ifup all
00:01:12 <2>: exec: wicked ifup all = 0
00:01:12 <4>: stdout + stderr:
lo              up
00:01:13 <4>: net_update_state:
00:01:13 <4>: lo: up
00:01:13 <4>:
00:01:13 <2>: Starting hardware detection...
Hardware detection
00:01:13 <2>: exec: /usr/bin/plymouth display-message --text="Hardware detection" = 0
00:01:14 <2>: Hardware detection finished.
00:01:14 <2>: exec: /usr/bin/plymouth system-update --progress=10 = 0
00:01:14 <1>: (If a driver is not working for you, try booting with brokenmodules=driver_name.)

00:01:14 <1>: Activating usb devices...
00:01:14 <4>: mod_insmod(usbcore, )
00:01:15 <2>: exec: insmod /modules/usbcore.ko.xz = 0
00:01:17 <4>: mod_insmod(uhci-hcd, )
00:01:18 <2>: exec: insmod /modules/uhci-hcd.ko.xz = 0
00:01:20 <4>: mod_insmod(usbhid, )
00:01:21 <2>: exec: insmod /modules/usbhid.ko.xz = 0
00:01:23 <4>: mod_insmod(input, )
00:01:23 <4>: mod_insmod(usbhid, )
00:01:23 <4>: mod_insmod(keybdev, )
00:01:23 <4>: mod_insmod(usb-storage, )
00:01:24 <2>: exec: insmod /modules/usb-storage.ko.xz = 0
00:01:32 <1>:  ok
00:01:32 <2>: exec: /usr/bin/plymouth system-update --progress=20 = 0
00:01:32 <2>: update_device_list(1)
00:01:32 <2>: scanning devices
00:01:33 <4>: = config file [flags 0x02] =
00:01:33 <2>:   key 0 "BOOT_IMAGE", value 0 "/boot/aarch64/linux", raw "BOOT_IMAGE=/boot/aarch64/linux"
00:01:33 <2>:   key 0 "splash", value 0 "silent", raw "splash=silent"
00:01:33 <2>:   key 99 "linuxrc.log", value 0 "/dev/console", raw "linuxrc.log=/dev/console"
00:01:33 <2>:   key 105 "linemode", value 0 "", raw "linemode"
00:01:33 <2>:   key 110 "linuxrc.debug", value 3 "3", raw "linuxrc.debug=3"
00:01:33 <2>: Downloading AutoYaST file: disk:/autoinst.xml?device=*label/OEMDRV&quiet=1
00:01:33 <2>: update_device_list(0)
00:01:33 <2>: rescanning devices
00:01:34 <2>: hd list (before)
00:01:34 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312 (disk)
00:01:34 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part1 (partition)
00:01:34 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part2 (partition)
00:01:34 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part3 (partition)
00:01:34 <2>:   /dev/zram0 (disk)
00:01:34 <2>: hd list (after)
00:01:34 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312 (disk)
00:01:34 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part1 (partition)
00:01:34 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part2 (partition)
00:01:34 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part3 (partition)
00:01:34 <2>:   /dev/zram0 (disk)
00:01:34 <2>: device not found (err = 0): *label/OEMDRV
00:01:34 <2>: url mount: trying disk:/?device=*label/OEMDRV (path = /)
00:01:34 <2>: url_setup_device: disk:/?device=*label/OEMDRV
00:01:34 <2>: Failed to download AutoYaST file.
00:01:34 <2>: dud url: disk:/?device=*usb*&all=1&quiet=1
00:01:34 <4>: url = disk:/?device=*usb*&all=1&quiet=1
00:01:34 <4>:   scheme = disk (17), orig scheme = disk (17)
00:01:34 <4>: , path = "/"
00:01:34 <4>:
00:01:34 <4>:   device = "*usb*"
00:01:34 <4>:
00:01:34 <4>:   network = 0, blockdev = 1, mountable = 1, file = 0, dir = 1, all = 1, quiet = 1
00:01:34 <4>:   query:
00:01:34 <4>:     device = "*usb*"
00:01:34 <4>:     all = "1"
00:01:34 <4>:     quiet = "1"
00:01:34 <4>: url (zypp format) = hd:/
00:01:34 <4>: url (ay format) = device:///
00:01:34 <2>: Reading driver update: disk:/?device=*usb*&all=1&quiet=1
00:01:34 <2>: update_device_list(0)
00:01:34 <2>: rescanning devices
00:01:35 <2>: hd list (before)
00:01:35 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312 (disk)
00:01:35 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part1 (partition)
00:01:35 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part2 (partition)
00:01:35 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part3 (partition)
00:01:35 <2>:   /dev/zram0 (disk)
00:01:35 <2>: hd list (after)
00:01:35 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312 (disk)
00:01:35 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part1 (partition)
00:01:35 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part2 (partition)
00:01:35 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part3 (partition)
00:01:35 <2>:   /dev/zram0 (disk)
00:01:35 <2>: device not found (err = 0): *usb*
00:01:35 <2>: url mount: trying disk:/?device=*usb* (path = /)
00:01:35 <2>: url_setup_device: disk:/?device=*usb*
00:01:35 <2>: dud url: disk:/?device=*label/OEMDRV&quiet=1
00:01:35 <4>: url = disk:/?device=*label/OEMDRV&quiet=1
00:01:35 <4>:   scheme = disk (17), orig scheme = disk (17)
00:01:35 <4>: , path = "/"
00:01:35 <4>:
00:01:35 <4>:   device = "*label/OEMDRV"
00:01:35 <4>:
00:01:35 <4>:   network = 0, blockdev = 1, mountable = 1, file = 0, dir = 1, all = 0, quiet = 1
00:01:35 <4>:   query:
00:01:35 <4>:     device = "*label/OEMDRV"
00:01:35 <4>:     quiet = "1"
00:01:35 <4>: url (zypp format) = hd:/
00:01:35 <4>: url (ay format) = device:///
00:01:35 <2>: Reading driver update: disk:/?device=*label/OEMDRV&quiet=1
00:01:35 <2>: update_device_list(0)
00:01:35 <2>: rescanning devices
00:01:36 <2>: hd list (before)
00:01:36 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312 (disk)
00:01:36 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part1 (partition)
00:01:36 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part2 (partition)
00:01:36 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part3 (partition)
00:01:36 <2>:   /dev/zram0 (disk)
00:01:36 <2>: hd list (after)
00:01:36 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312 (disk)
00:01:36 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part1 (partition)
00:01:36 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part2 (partition)
00:01:36 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part3 (partition)
00:01:36 <2>:   /dev/zram0 (disk)
00:01:36 <2>: device not found (err = 0): *label/OEMDRV
00:01:36 <2>: url mount: trying disk:/?device=*label/OEMDRV (path = /)
00:01:36 <2>: url_setup_device: disk:/?device=*label/OEMDRV
00:01:36 <4>: url = cd:/
00:01:36 <4>:   scheme = cd (8), orig scheme = cd (8)
00:01:36 <4>: , path = "/"
00:01:36 <4>:
00:01:36 <4>:   network = 0, blockdev = 1, mountable = 1, file = 0, dir = 1, all = 0, quiet = 0
00:01:36 <4>: url (zypp format) = cd:/
00:01:36 <4>: url (ay format) = device:///
00:01:36 <4>: url = boot/aarch64/root
00:01:36 <4>:   scheme = rel (16), orig scheme = rel (16)
00:01:36 <4>: , path = "boot/aarch64/root"
00:01:36 <4>:
00:01:36 <4>:   network = 0, blockdev = 0, mountable = 0, file = 0, dir = 0, all = 0, quiet = 0
00:01:36 <4>: url (zypp format) = (null)
00:01:36 <4>: url (ay format) = relurl://boot/aarch64/root
00:01:36 <2>: exec: /usr/bin/plymouth system-update --progress=30 = 0
00:01:36 <2>: repository: looking for cd:/
00:01:36 <2>: update_device_list(0)
00:01:36 <2>: rescanning devices
00:01:37 <2>: device not found (err = 0):
00:01:37 <2>: repository: not found
00:01:37 <2>: no openSUSE Tumbleweed repository found
00:01:37 <4>: url = hd:/
00:01:37 <4>:   scheme = hd (10), orig scheme = hd (10)
00:01:37 <4>: , path = "/"
00:01:37 <4>:
00:01:37 <4>:   network = 0, blockdev = 1, mountable = 1, file = 0, dir = 1, all = 0, quiet = 0
00:01:37 <4>: url (zypp format) = hd:/
00:01:37 <4>: url (ay format) = device:///
00:01:37 <2>: repository: looking for hd:/
00:01:37 <2>: update_device_list(0)
00:01:37 <2>: rescanning devices
00:01:38 <2>: hd list (before)
00:01:38 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312 (disk)
00:01:38 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part1 (partition)
00:01:38 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part2 (partition)
00:01:38 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part3 (partition)
00:01:38 <2>:   /dev/zram0 (disk)
00:01:38 <2>: hd list (after)
00:01:38 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312 (disk)
00:01:38 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part1 (partition)
00:01:38 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part2 (partition)
00:01:38 <2>:   /dev/disk/by-id/mmc-DG4032_0x32b54312-part3 (partition)
00:01:38 <2>:   /dev/zram0 (disk)
00:01:38 <2>: url mount: trying hd:/?device=disk/by-id/mmc-DG4032_0x32b54312-part1 (path = /)
00:01:38 <2>: (Partition: 600 MB, vfat)
00:01:38 <2>: url_setup_device: hd:/?device=disk/by-id/mmc-DG4032_0x32b54312-part1
00:01:38 <2>: mount: dev = /dev/disk/by-id/mmc-DG4032_0x32b54312-part1, dir = /var/adm/mount, flags = 0x1
00:01:38 <4>: mod_insmod(fat, )
00:01:39 <2>: exec: insmod /modules/fat.ko.xz = 0
00:01:39 <4>: mod_insmod(vfat, )
00:01:40 <2>: exec: insmod /modules/vfat.ko.xz = 0
00:01:41 <2>: /dev/disk/by-id/mmc-DG4032_0x32b54312-part1: type = vfat.
00:01:41 <4>: url = file:/var/adm/mount
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount
00:01:41 <4>: url (ay format) = file:///var/adm/mount
00:01:41 <4>: path: "/var/adm/mount" + "/content" = "/var/adm/mount/content"
00:01:41 <4>: url = file:/var/adm/mount/content
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount/content"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount/content
00:01:41 <4>: url (ay format) = file:///var/adm/mount/content
00:01:41 <2>: loading file:/var/adm/mount/content -> /content
00:01:41 <4>: curl opt url = 0 ()
00:01:41 <4>: url_read(file:/var/adm/mount/content)
00:01:41 <4>: curl perform = 37 (Couldn't open file /var/adm/mount/content)
00:01:41 <2>: error 37: Couldn't open file /var/adm/mount/content
00:01:41 <4>: url = file:/var/adm/mount
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount
00:01:41 <4>: url (ay format) = file:///var/adm/mount
00:01:41 <4>: path: "/var/adm/mount" + "/repodata/repomd.xml" = "/var/adm/mount/repodata/repomd.xml"
00:01:41 <4>: url = file:/var/adm/mount/repodata/repomd.xml
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount/repodata/repomd.xml"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount/repodata/repomd.xml
00:01:41 <4>: url (ay format) = file:///var/adm/mount/repodata/repomd.xml
00:01:41 <2>: loading file:/var/adm/mount/repodata/repomd.xml -> /repomd.xml
00:01:41 <4>: curl opt url = 0 ()
00:01:41 <4>: url_read(file:/var/adm/mount/repodata/repomd.xml)
00:01:41 <4>: curl perform = 37 (Couldn't open file /var/adm/mount/repodata/repomd.xml)
00:01:41 <2>: error 37: Couldn't open file /var/adm/mount/repodata/repomd.xml
00:01:41 <4>: url = file:/var/adm/mount
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount
00:01:41 <4>: url (ay format) = file:///var/adm/mount
00:01:41 <4>: path: "/var/adm/mount" + "/media.1/products" = "/var/adm/mount/media.1/products"
00:01:41 <4>: url = file:/var/adm/mount/media.1/products
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount/media.1/products"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount/media.1/products
00:01:41 <4>: url (ay format) = file:///var/adm/mount/media.1/products
00:01:41 <2>: loading file:/var/adm/mount/media.1/products -> /products
00:01:41 <4>: curl opt url = 0 ()
00:01:41 <4>: url_read(file:/var/adm/mount/media.1/products)
00:01:41 <4>: curl perform = 37 (Couldn't open file /var/adm/mount/media.1/products)
00:01:41 <2>: error 37: Couldn't open file /var/adm/mount/media.1/products
00:01:41 <2>: disk: mount ok but test failed
00:01:41 <2>: url mount: hd:/?device=disk/by-id/mmc-DG4032_0x32b54312-part1 failed
00:01:41 <2>: url mount: trying hd:/?device=disk/by-id/mmc-DG4032_0x32b54312-part2 (path = /)
00:01:41 <2>: (Partition: 1.0 GB, ext4)
00:01:41 <2>: url_setup_device: hd:/?device=disk/by-id/mmc-DG4032_0x32b54312-part2
00:01:41 <2>: mount: dev = /dev/disk/by-id/mmc-DG4032_0x32b54312-part2, dir = /var/adm/mount, flags = 0x1
00:01:41 <2>: /dev/disk/by-id/mmc-DG4032_0x32b54312-part2: type = ext4.
00:01:41 <4>: url = file:/var/adm/mount
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount
00:01:41 <4>: url (ay format) = file:///var/adm/mount
00:01:41 <4>: path: "/var/adm/mount" + "/content" = "/var/adm/mount/content"
00:01:41 <4>: url = file:/var/adm/mount/content
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount/content"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount/content
00:01:41 <4>: url (ay format) = file:///var/adm/mount/content
00:01:41 <2>: loading file:/var/adm/mount/content -> /content
00:01:41 <4>: curl opt url = 0 ()
00:01:41 <4>: url_read(file:/var/adm/mount/content)
00:01:41 <4>: curl perform = 37 (Couldn't open file /var/adm/mount/content)
00:01:41 <2>: error 37: Couldn't open file /var/adm/mount/content
00:01:41 <4>: url = file:/var/adm/mount
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount
00:01:41 <4>: url (ay format) = file:///var/adm/mount
00:01:41 <4>: path: "/var/adm/mount" + "/repodata/repomd.xml" = "/var/adm/mount/repodata/repomd.xml"
00:01:41 <4>: url = file:/var/adm/mount/repodata/repomd.xml
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount/repodata/repomd.xml"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount/repodata/repomd.xml
00:01:41 <4>: url (ay format) = file:///var/adm/mount/repodata/repomd.xml
00:01:41 <2>: loading file:/var/adm/mount/repodata/repomd.xml -> /repomd.xml
00:01:41 <4>: curl opt url = 0 ()
00:01:41 <4>: url_read(file:/var/adm/mount/repodata/repomd.xml)
00:01:41 <4>: curl perform = 37 (Couldn't open file /var/adm/mount/repodata/repomd.xml)
00:01:41 <2>: error 37: Couldn't open file /var/adm/mount/repodata/repomd.xml
00:01:41 <4>: url = file:/var/adm/mount
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount
00:01:41 <4>: url (ay format) = file:///var/adm/mount
00:01:41 <4>: path: "/var/adm/mount" + "/media.1/products" = "/var/adm/mount/media.1/products"
00:01:41 <4>: url = file:/var/adm/mount/media.1/products
00:01:41 <4>:   scheme = file (1), orig scheme = file (1)
00:01:41 <4>: , path = "/var/adm/mount/media.1/products"
00:01:41 <4>:
00:01:41 <4>:   network = 0, blockdev = 0, mountable = 1, file = 0, dir = 0, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = file:/var/adm/mount/media.1/products
00:01:41 <4>: url (ay format) = file:///var/adm/mount/media.1/products
00:01:41 <2>: loading file:/var/adm/mount/media.1/products -> /products
00:01:41 <4>: curl opt url = 0 ()
00:01:41 <4>: url_read(file:/var/adm/mount/media.1/products)
00:01:41 <4>: curl perform = 37 (Couldn't open file /var/adm/mount/media.1/products)
00:01:41 <2>: error 37: Couldn't open file /var/adm/mount/media.1/products
00:01:41 <2>: disk: mount ok but test failed
00:01:41 <2>: url mount: hd:/?device=disk/by-id/mmc-DG4032_0x32b54312-part2 failed
00:01:41 <2>: url mount: trying hd:/?device=disk/by-id/mmc-DG4032_0x32b54312-part3 (path = /)
00:01:41 <2>: (Partition: 28 GB, LVM2_member)
00:01:41 <2>: url_setup_device: hd:/?device=disk/by-id/mmc-DG4032_0x32b54312-part3
00:01:41 <2>: url mount: trying hd:/?device=zram0 (path = /)
00:01:41 <2>: (Disk)
00:01:41 <2>: url_setup_device: hd:/?device=zram0
00:01:41 <2>: mount: dev = /dev/zram0, dir = /var/adm/mount, flags = 0x1
00:01:41 <2>: /dev/zram0: type = ext2.
00:01:41 <2>: mount: /dev/zram0: Device or resource busy
00:01:41 <2>: url mount: hd:/?device=zram0 failed
00:01:41 <2>: device not found (err = 1):
00:01:41 <2>: repository: not found
00:01:41 <2>: no openSUSE Tumbleweed repository found
00:01:41 <4>: url = http://download.opensuse.org/ports/aarch64/tumbleweed/repo/oss/
00:01:41 <4>:   scheme = http (5), orig scheme = http (5)
00:01:41 <4>: , server = "download.opensuse.org"
00:01:41 <4>: , path = "ports/aarch64/tumbleweed/repo/oss/"
00:01:41 <4>:
00:01:41 <4>:   network = 1, blockdev = 0, mountable = 0, file = 0, dir = 1, all = 0, quiet = 0
00:01:41 <4>: url (zypp format) = http://download.opensuse.org/ports/aarch64/tumbleweed/repo/oss/
00:01:41 <4>: url (ay format) = http://download.opensuse.org/ports/aarch64/tumbleweed/repo/oss/
00:01:41 <2>: repository: looking for http://download.opensuse.org/ports/aarch64/tumbleweed/repo/oss/
00:01:41 <2>: update_device_list(0)
00:01:41 <2>: rescanning devices
00:01:42 <2>: hd list (before)
00:01:42 <2>:   lo (network interface)
00:01:42 <2>: hd list (after)
00:01:42 <2>:   lo (network interface)
00:01:42 <2>: url mount: trying http://download.opensuse.org/ports/aarch64/tumbleweed/repo/oss/?device=lo (path = ports/aarch64/tumbleweed/repo/oss/)
00:01:42 <2>: (Loopback network interface)
00:01:42 <2>: url_setup_device: http://download.opensuse.org/ports/aarch64/tumbleweed/repo/oss/?device=lo
00:01:42 <2>: setup_interface: lo ignored
00:01:42 <2>: device not found (err = 1):
00:01:42 <2>: repository: not found
00:01:42 <2>: no openSUSE Tumbleweed repository found
00:01:42 <4>: find repo:
00:01:42 <4>:   ok = 0
00:01:42 <4>:   is.network = 1
00:01:42 <4>:   is.mountable = 0
00:01:42 <4>:   device =
00:01:42 <4>:   ZyppRepoURL: http://download.opensuse.org/ports/aarch64/tumbleweed/repo/oss/
00:01:42 <2>: exec: /usr/bin/plymouth system-update --progress=40 = 0
00:01:42 <2>: Automatic setup not possible.
00:01:42 <4>: win on
00:01:42 <2>: exec: /usr/bin/plymouth quit = 0
00:01:42 <2>: error setting kbd mode: Input/output error
00:01:42 <4>: key(0): 0x00
00:01:42 <4>: save area 0xffffc430f798 at 6 x 5 (size 71 x 19)
00:01:42 <4>: save area 0xffffc430f7c0 at 6 x 5 (size 71 x 19)
00:01:42 <4>: restore area 0xffffc430f7c0 at 6 x 5 (size 71 x 19)