config

# Change this according to your device
################
# Variables
################

# Date and time
date_and_week=$(date "+%Y/%m/%d (w%V)")
current_time=$(date "+%H:%M:%S")

#############
# Commands
#############

# Battery or charger
battery_charge=$(upower --show-info $(upower --enumerate | grep 'BAT') | egrep "percentage" | awk '{print $2}')
battery_status=$(upower --show-info $(upower --enumerate | grep 'BAT') | egrep "state" | awk '{print $2}')

# Audio and multimedia
# audio_volume=$(pamixer --sink `pactl list sinks short | grep RUNNING | awk '{print $1}'` --get-volume)
# audio_is_muted=$(pamixer --sink `pactl list sinks short | grep RUNNING | awk '{print $1}'` --get-mute)

# Network
network=$(ip route get 1.1.1.1 | grep -Po '(?<=dev\s)\w+' | cut -f1 -d ' ')
# interface_easyname grabs the "old" interface name before systemd renamed it
interface_easyname=$(dmesg | grep $network | grep renamed | awk 'NF>1{print $NF}')
# ping=$(ping -c 1 www.google.es | tail -1| awk '{print $4}' | cut -d '/' -f 2 | cut -d '.' -f 1)

if [ $battery_status = "discharging" ];
then
    battery_pluggedin='⚠'
else
    battery_pluggedin='⚡'
fi

if ! [ $network ]
then
    network_active="⛔"
else
    network_active="⇆"
fi

# if [ "$audio_is_muted" = "true" ]
# then
#     audio_active='🔇'
# else
#     audio_active='🔊'
# fi

# echo "$network_active $interface_easyname ($ping ms) | $audio_active $audio_volume% | $battery_pluggedin $battery_charge | $date_and_week 🕘 $current_time"
echo "$network_active $interface_easyname | $battery_pluggedin $battery_charge | $date_and_week 🕘 $current_time"
# Default config for sway
#
# Copy this to ~/.config/sway/config and edit it to your liking.
#
# Read `man 5 sway` for a complete reference.

### Variables
#
# Logo key. Use Mod1 for Alt.
set $mod Mod4
# Home row direction keys, like vim
set $left h
set $down j
set $up k
set $right l
# Your preferred terminal emulator
set $term alacritty
# Your preferred application launcher
# Note: it's recommended that you pass the final command to sway
set $menu dmenu_path | dmenu | xargs swaymsg exec --

### Output configuration
#
# Default wallpaper
#output * bg ~/.config/sway/backgrounds/Sway_Wallpaper_Blue_1920x1080.png fill
#
# Example configuration:
#
#   output HDMI-A-1 resolution 1920x1080 position 1920,0
#
# You can get the names of your outputs by running: swaymsg -t get_outputs

# output eDP-1 resolution 1920x1080 position 0,800
# output HDMI-A-2 resolution 2560x1440 position 1920,0

### Idle configuration
#
# Example configuration:
#

# exec swayidle -w \
#          timeout 300 'swaylock -f -c 000000' \
#          timeout 600 'swaymsg "output * dpms off"' \
#               resume 'swaymsg "output * dpms on"' \
#          before-sleep 'swaylock -f -c 000000'

#
# This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 300 seconds, and turn your screens back on when
# resumed. It will also lock your screen before your computer goes to sleep.

### Input configuration
#
# Example configuration:
#
#   input "2:14:SynPS/2_Synaptics_TouchPad" {
#       dwt enabled
#       tap enabled
#       natural_scroll enabled
#       middle_emulation enabled
#   }
#
# You can get the names of your inputs by running: swaymsg -t get_inputs
# Read `man 5 sway-input` for more information about this section.

# Disable touchpad
input type:touchpad {
  events disabled
}

# input type:touchpad {
#   dwt enabled
#   tap enabled
#   natural_scroll enabled
#   middle_emulation enabled
# }


# Keyboard input configuration
input type:keyboard {
  xkb_layout us
  xkb_variant altgr-intl
  xkb_options ctrl:nocaps
}

### Key bindings
#
# Basics:
#
    # Start a terminal
    bindsym $mod+Return exec $term

    # Kill focused window
    bindsym $mod+Shift+c kill

    # Start your launcher
    bindsym $mod+p exec $menu

    bindsym $mod+Shift+p exec passmenu

    # Drag floating windows by holding down $mod and left mouse button.
    # Resize them with right mouse button + $mod.
    # Despite the name, also works for non-floating windows.
    # Change normal to inverse to use left mouse button for resizing and right
    # mouse button for dragging.
    floating_modifier $mod normal

    # Don't follow focus on different windows
    mouse_warping none

    # Reload the configuration file
    bindsym $mod+q reload

    # Exit sway (logs you out of your Wayland session)
    bindsym $mod+Shift+q exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -b 'Yes, exit sway' 'swaymsg exit'
#
# Moving around:
#
    # Move your focus around
    bindsym $mod+$left focus left
    bindsym $mod+$down focus down
    bindsym $mod+$up focus up
    bindsym $mod+$right focus right
    # Or use $mod+[up|down|left|right]
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right

    # # Move the focused window with the same, but add Shift
    bindsym $mod+Shift+$left move left
    bindsym $mod+Shift+$down move down
    bindsym $mod+Shift+$up move up
    bindsym $mod+Shift+$right move right
    # Ditto, with arrow keys
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right

    bindsym XF86MonBrightnessDown exec brightnessctl set 10%-
    bindsym XF86MonBrightnessUp exec brightnessctl set 10%+

    bindsym XF86AudioRaiseVolume exec pactl set-sink-volume @DEFAULT_SINK@ +5%
    bindsym XF86AudioLowerVolume exec pactl set-sink-volume @DEFAULT_SINK@ -5%
    bindsym XF86AudioMute exec pactl set-sink-mute @DEFAULT_SINK@ toggle
    bindsym XF86AudioMicMute exec pactl set-source-mute @DEFAULT_SOURCE@ toggle

    bindsym Print exec grim -g "$(slurp)" ~/tmp/screenshot.png

#
# Workspaces:
#
    # Switch to workspace
    bindsym $mod+1 workspace 1
    bindsym $mod+2 workspace 2
    bindsym $mod+3 workspace 3
    bindsym $mod+4 workspace 4
    bindsym $mod+5 workspace 5
    bindsym $mod+6 workspace 6
    bindsym $mod+7 workspace 7
    bindsym $mod+8 workspace 8
    bindsym $mod+9 workspace 9
    bindsym $mod+0 workspace 10
    # Move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace 1
    bindsym $mod+Shift+2 move container to workspace 2
    bindsym $mod+Shift+3 move container to workspace 3
    bindsym $mod+Shift+4 move container to workspace 4
    bindsym $mod+Shift+5 move container to workspace 5
    bindsym $mod+Shift+6 move container to workspace 6
    bindsym $mod+Shift+7 move container to workspace 7
    bindsym $mod+Shift+8 move container to workspace 8
    bindsym $mod+Shift+9 move container to workspace 9
    bindsym $mod+Shift+0 move container to workspace 10
    # Note: workspaces can have any name you want, not just numbers.
    # We just use 1-10 as the default.
#
# Layout stuff:
#
    # You can "split" the current object of your focus with
    # $mod+b or $mod+v, for horizontal and vertical splits
    # respectively.
    bindsym $mod+b splith
    bindsym $mod+v splitv

    # Switch the current container between different layout styles
    bindsym $mod+s layout stacking
    bindsym $mod+w layout tabbed
    bindsym $mod+e layout toggle split

    # Make the current focus fullscreen
    bindsym $mod+f fullscreen

    # Toggle the current focus between tiling and floating mode
    bindsym $mod+Shift+space floating toggle

    # Swap focus between the tiling area and the floating area
    bindsym $mod+space focus mode_toggle

    # Move focus to the parent container
    bindsym $mod+a focus parent
#
# Scratchpad:
#
    # Sway has a "scratchpad", which is a bag of holding for windows.
    # You can send windows there and get them back later.

    # Move the currently focused window to the scratchpad
    bindsym $mod+Shift+minus move scratchpad

    # Show the next scratchpad window or hide the focused scratchpad window.
    # If there are multiple scratchpad windows, this command cycles through them.
    bindsym $mod+minus scratchpad show
    bindsym $mod+equal scratchpad show

    # Move the currently focused window to the scratchpad
    bindsym $mod+Shift+backspace move scratchpad

    # Show the next scratchpad window or hide the focused scratchpad window.
    # If there are multiple scratchpad windows, this command cycles through them.
    bindsym $mod+backspace scratchpad show
#
# Resizing containers:
#
mode "resize" {
    # left will shrink the containers width
    # right will grow the containers width
    # up will shrink the containers height
    # down will grow the containers height
    bindsym $left resize shrink width 10px
    bindsym $down resize grow height 10px
    bindsym $up resize shrink height 10px
    bindsym $right resize grow width 10px

    # Ditto, with arrow keys
    bindsym Left resize shrink width 10px
    bindsym Down resize grow height 10px
    bindsym Up resize shrink height 10px
    bindsym Right resize grow width 10px

    # Return to default mode
    bindsym Return mode "default"
    bindsym Escape mode "default"
}
# bindsym $mod+r mode "resize"

# pavucontrol
bindsym $mod+Shift+v exec pavucontrol

# swaylock
bindsym $mod+Shift+o exec swaylock

# emacs
bindsym $mod+Shift+e exec emacsclient -c

# emacs
bindsym $mod+Shift+f exec firefox

#
# Status Bar:
#
# Read `man 5 sway-bar` for more information about this section.
bar {
    position top

    # When the status_command prints a new line to stdout, swaybar updates.
    # The default just shows the current date and time.
    # status_command while date +'%Y-%m-%d %l:%M:%S %p'; do sleep 1; done
    status_command while ~/.config/sway/sway_bar.sh; do sleep 1; done

    colors {
        statusline #ffffff
        background #323232
        inactive_workspace #32323200 #32323200 #5c5c5c
    }
}

exec dbus-update-activation-environment WAYLAND_DISPLAY
exec systemctl --user import-environment WAYLAND_DISPLAY DISPLAY DBUS_SESSION_BUS_ADDRESS SWAYSOCK
# exec systemctl --user import-environment

# exec systemctl --user start graphical-session.target

sway_bar.sh

# Change this according to your device
################
# Variables
################

# Date and time
date_and_week=$(date "+%Y/%m/%d (w%V)")
current_time=$(date "+%H:%M:%S")

#############
# Commands
#############

# Battery or charger
battery_charge=$(upower --show-info $(upower --enumerate | grep 'BAT') | egrep "percentage" | awk '{print $2}')
battery_status=$(upower --show-info $(upower --enumerate | grep 'BAT') | egrep "state" | awk '{print $2}')

# Audio and multimedia
# audio_volume=$(pamixer --sink `pactl list sinks short | grep RUNNING | awk '{print $1}'` --get-volume)
# audio_is_muted=$(pamixer --sink `pactl list sinks short | grep RUNNING | awk '{print $1}'` --get-mute)

# Network
network=$(ip route get 1.1.1.1 | grep -Po '(?<=dev\s)\w+' | cut -f1 -d ' ')
# interface_easyname grabs the "old" interface name before systemd renamed it
interface_easyname=$(dmesg | grep $network | grep renamed | awk 'NF>1{print $NF}')
# ping=$(ping -c 1 www.google.es | tail -1| awk '{print $4}' | cut -d '/' -f 2 | cut -d '.' -f 1)

if [ $battery_status = "discharging" ];
then
    battery_pluggedin='⚠'
else
    battery_pluggedin='⚡'
fi

if ! [ $network ]
then
    network_active="⛔"
else
    network_active="⇆"
fi

# if [ "$audio_is_muted" = "true" ]
# then
#     audio_active='🔇'
# else
#     audio_active='🔊'
# fi

# echo "$network_active $interface_easyname ($ping ms) | $audio_active $audio_volume% | $battery_pluggedin $battery_charge | $date_and_week 🕘 $current_time"
echo "$network_active $interface_easyname | $battery_pluggedin $battery_charge | $date_and_week 🕘 $current_time"