ntp.conf

# NOTES:
#  - you should only have to update the server line below
#  - if you start getting lines like 'restrict' and 'fudge'
#    and you didnt add them, AND you run dhcpcd on your
#    network interfaces, be sure to add '-Y -N' to the
#    dhcpcd_ethX variables in /etc/conf.d/net

# Name of the servers ntpd should sync with
# Please respect the access policy as stated by the responsible person.
server		0.us.pool.ntp.org		iburst
server          1.us.pool.ntp.org               iburst
server          2.us.pool.ntp.org               iburst
server          3.us.pool.ntp.org               iburst

##
# A list of available servers can be found here:
# http://www.pool.ntp.org/
# http://www.pool.ntp.org/#use
# A good way to get servers for your machine is:
# netselect -s 3 pool.ntp.org
##

# you should not need to modify the following paths
driftfile	/var/lib/ntp/ntp.drift
logfile         /var/log/ntp.log

server 127.127.1.0
fudge 127.127.1.0 stratum 10
#server ntplocal.example.com prefer 
#server timeserver.example.org 

# Warning: Using default NTP settings will leave your NTP
# server accessible to all hosts on the Internet.

# If you want to deny all machines (including your own)
# from accessing the NTP server, uncomment:
#restrict default ignore


# To deny other machines from changing the
# configuration but allow localhost:
restrict default kod nomodify notrap nopeer noquery
restrict 127.0.0.1
restrict 1.2.3.4 nomodify
restrict 192.168.0.0 mask 255.255.255.0 nomodify notrap