Netgear r6700v3 LEDS Startup Script

leds.startup

#!/bin/sh
#
for i in 1 7 8 9 12 13 ; do gpio enable $i ; done
for i in 10 11 ; do gpio disable $i ; done


# note: et didn't exists on my device, I therefore turn on jffs support and uploaded a copy to /tmp using scp and finally moved it to /jffs
# if et exists on your device, by running et directly in cli, you can remove the /jffs/ prefix from the following commands
# 
# /jffs/et robowr 0x0 0x18 0x1ff 
/jffs/et robowr 0x0 0x18 0x0
/jffs/et robowr 0x0 0x1a 0x0
# /jffs/et robowr 0x0 0x16 0x0

# also note: commented out et robowr commands use to work with netgear-r6700v3-webflash-05-09-2020-r43099.bin 
# but for the netgear-r6700v3-webflash-11-05-2021-r47618.bin they no longer seem to work or possibly do something but, inhibit desired effect of full night mode
# Ethernet port 1 seems to shut off now as well with only the two commands, which is great, whereas in the past with the 4 lines it wouldn't shut off.

# Ordered by physical LED from left to right (some changes since r43099 i.e. this is what my discovery for r47618 produced; need others to confirm.)
#
# GPIO   LED            Notes
# 0
# 1      Power          Enable/Disable LED (gpio enable 1 turns led off)
# 2      Power          Toggle Led Coler (White/Amber)
# 3      Disable 4      None led - It seems that register 3 is enabled by default. If it is disabled, register 4 does not work)
# 4      Wifi On/Off    None led - Toggles Wifi On/Off (gpio enable turns on)
# 5      Reset          None led - Full Reset (default: enabled - gpio disable 5 resets router - requires user/password update etc)
# 6      Internet       Toggle Led Color (White/Amber)
# 7      Internet       Enable/Disable Led (gpio enable 7 turns led off)
# 9      2.4 GHz        Enable/Disable Led (gpio enable 9 turns led off)
# 8      5 GHz          Enable/Disable Led (gpio enable 8 turns led off)
# 12     Guest WiFi     Enable/Disable Led (gpio enable 12 turns led off)
# 13     USB 3.0        Enable/Disable Led (gpio enable 13 turns led off) - R6700v3 only has one USB 3.0 port on the front and doesn't have port next to power button.

# et     Ethernet 1    use et above
# et     Ethernet 2    use et above
# et     Ethernet 3    use et above
# et     Ethernet 4    use et above
 
# 11     WiFi On/Off    Enable/Disable Led (gpio disable 11 turns led off)
# 10     WPS            Enable/Disable Led (gpio disable 10 turns led off)

Comments removed:

#!/bin/sh
#
for i in 1 7 8 9 12 13 ; do gpio enable $i ; done
for i in 10 11 ; do gpio disable $i ; done
/jffs/et robowr 0x0 0x18 0x0
/jffs/et robowr 0x0 0x1a 0x0

Netgear r6700v3 - DD-WRT Wiki:
https://wiki.dd-wrt.com/wiki/index.php/Netgear_R6700v3

More context:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324768

More on Startup Scripts and running commands:
https://wiki.dd-wrt.com/wiki/index.php/Startup_Scripts

More on JFFS:
https://wiki.dd-wrt.com/wiki/index.php/JFFS_File_System

More on Telnet/SSH:
https://wiki.dd-wrt.com/wiki/index.php/Telnet/SSH_and_the_Command_Line

How to scp:
https://linuxize.com/post/how-to-use-scp-command-to-securely-transfer-files/

For those missing et (mini linux guide):

1. Download et from here: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1203814#1203814 - backup here: https://www.mediafire.com/file/pdysgl093sqzfie/et/file
2. Enable ssh - It's under Services > Services > Secure Shell - I added a public key with password enabled and login with router password.
3. Enable and clean jffs - see More on JFFS link above and then read Directions for (normal) users: using Web-GUI Interface in that wiki - probably best to reboot to make sure it's enabled and you're seeing Available and Free space specs.
4. scp /path/to/et root@192.168.x.x:/tmp/et - update the path to et file, which you just downloaded to your local machine, as well as update your router's ip address accordingly; most likely 192.168.1.1
5. mv /tmp/et /jffs - move et from /tmp into /jffs
6. Add script above as a Startup Script via the WebGUI (or via other methods listed in Startup Scripts Wiki)
7. Reboot

If everything went according to plan, all leds should be turned off; after initial boot.

More context, although for r70xx routers (supposedly they are similar):
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1181819#1181819

r6400v2:

Board ID
Build directory files to use based on Board ID:

R6400v2 U12H332T20_NETGEAR: netgear-r6400v2 directory
R6400v2 U12H332T30_NETGEAR: netgear-r6400v2otp directory
R6700v3 U12H332T77_NETGEAR: netgear-r6700v3 directory

https://wiki.dd-wrt.com/wiki/index.php/Netgear_R6400v2
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399

# 6 Internet Toggle Led Color (White/Amber)
how to toggle Led Color to green when it's a giga WAN?

@Mile-Lile sorry, didn't see your question until now.

I don't think you can change the colors but, I could be wrong. I don't have a giga wan so I couldn't even test if I wanted to (I just ran a speedtest and I'm at 23.8 Mbps download; cries tears of slowness...)