Skip to content

Instantly share code, notes, and snippets.

@Neo-Oli

Neo-Oli/config.log

Created August 15, 2018 10:45
Show Gist options
  • Save Neo-Oli/336b2590ae65efe7d531d56613a4c1b6 to your computer and use it in GitHub Desktop.
Save Neo-Oli/336b2590ae65efe7d531d56613a4c1b6 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by gobject-introspection configure 1.56.1, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/data/data/com.termux/files/usr --with-python=/data/data/com.termux/files/usr/bin/python
## --------- ##
## Platform. ##
## --------- ##
hostname = localhost
uname -m = aarch64
uname -r = 3.10.84-LineageOS-g3be0891
uname -s = Linux
uname -v = #1 SMP PREEMPT Sun Dec 24 15:59:51 CET 2017
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /data/data/com.termux/files/home/bin
PATH: /data/data/com.termux/files/home/.cargo/bin
PATH: /data/data/com.termux/files/home/.go/bin
PATH: /data/data/com.termux/files/usr/bin
PATH: /data/data/com.termux/files/usr/bin/applets
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2624: checking for a BSD-compatible install
configure:2692: result: /data/data/com.termux/files/usr/bin/applets/install -c
configure:2703: checking whether build environment is sane
configure:2758: result: yes
configure:2909: checking for a thread-safe mkdir -p
configure:2948: result: build-aux/install-sh -c -d
configure:2955: checking for gawk
configure:2985: result: no
configure:2955: checking for mawk
configure:2985: result: no
configure:2955: checking for nawk
configure:2985: result: no
configure:2955: checking for awk
configure:2971: found /data/data/com.termux/files/usr/bin/applets/awk
configure:2982: result: awk
configure:2993: checking whether make sets $(MAKE)
configure:3015: result: yes
configure:3044: checking whether make supports nested variables
configure:3061: result: yes
configure:3150: checking whether UID '10086' is supported by ustar format
configure:3153: result: yes
configure:3160: checking whether GID '10086' is supported by ustar format
configure:3163: result: yes
configure:3171: checking how to create a ustar tar archive
configure:3182: tar --version
tar (busybox) 1.29.2
configure:3185: $? = 0
configure:3225: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar
tar: unrecognized option `--format=ustar'
BusyBox v1.29.2 (2018-07-31 19:42:23 UTC) multi-call binary.
Usage: tar c|x|t [-ZzJjahmvokO] [-f TARFILE] [-C DIR] [-T FILE] [-X FILE] [--exclude PATTERN]... [FILE]...
Create, extract, or list files from a tar file
c Create
x Extract
t List
-f FILE Name of TARFILE ('-' for stdin/out)
-C DIR Change to DIR before operation
-v Verbose
-O Extract to stdout
-m Don't restore mtime
-o Don't restore user:group
-k Don't replace existing files
-Z (De)compress using compress
-z (De)compress using gzip
-J (De)compress using xz
-j (De)compress using bzip2
-a (De)compress using lzma
-h Follow symlinks
-T FILE File with names to include
-X FILE File with glob patterns to exclude
--exclude PATTERN Glob pattern to exclude
configure:3228: $? = 1
configure:3225: tardir=conftest.dir && eval pax -L -x ustar -w "$tardir" >conftest.tar
./configure: 1: eval: pax: not found
configure:3228: $? = 127
configure:3225: tardir=conftest.dir && eval find "$tardir" -print | cpio -o -H ustar -L >conftest.tar
BusyBox v1.29.2 (2018-07-31 19:42:23 UTC) multi-call binary.
Usage: cpio [-dmvu] [-F FILE] [-R USER[:GRP]] [-H newc] [-tio] [-p DIR] [EXTR_FILE]...
Extract (-i) or list (-t) files from a cpio archive, or
take file list from stdin and create an archive (-o) or copy files (-p)
Main operation mode:
-t List
-i Extract EXTR_FILEs (or all)
-o Create (requires -H newc)
-p DIR Copy files to DIR
Options:
-d Make leading directories
-m Preserve mtime
-v Verbose
-u Overwrite
-F FILE Input (-t,-i,-p) or output (-o) file
-R USER[:GRP] Set owner of created files
-H newc Archive format
configure:3228: $? = 1
configure:3225: tardir=conftest.dir && eval false >conftest.tar
configure:3228: $? = 1
configure:3253: result: none
configure:3304: checking whether to enable maintainer-specific portions of Makefiles
configure:3313: result: yes
configure:3338: checking whether make supports nested variables
configure:3355: result: yes
configure:3376: checking build system type
configure:3390: result: aarch64-unknown-linux-gnu
configure:3410: checking host system type
configure:3423: result: aarch64-unknown-linux-gnu
configure:3509: checking for gcc
configure:3525: found /data/data/com.termux/files/usr/bin/gcc
configure:3536: result: gcc
configure:3765: checking for C compiler version
configure:3774: gcc --version >&5
clang version 6.0.1 (tags/RELEASE_601/final)
Target: aarch64--linux-android
Thread model: posix
InstalledDir: /data/data/com.termux/files/usr/bin
configure:3785: $? = 0
configure:3774: gcc -v >&5
clang version 6.0.1 (tags/RELEASE_601/final)
Target: aarch64--linux-android
Thread model: posix
InstalledDir: /data/data/com.termux/files/usr/bin
configure:3785: $? = 0
configure:3774: gcc -V >&5
clang-6.0: error: argument to '-V' is missing (expected 1 value)
clang-6.0: error: no input files
configure:3785: $? = 1
configure:3774: gcc -qversion >&5
clang-6.0: error: unknown argument: '-qversion'
clang-6.0: error: no input files
configure:3785: $? = 1
configure:3805: checking whether the C compiler works
configure:3827: gcc -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:3831: $? = 0
configure:3879: result: yes
configure:3882: checking for C compiler default output file name
configure:3884: result: a.out
configure:3890: checking for suffix of executables
configure:3897: gcc -o conftest -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:3901: $? = 0
configure:3923: result:
configure:3945: checking whether we are cross compiling
configure:3953: gcc -o conftest -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:3957: $? = 0
configure:3964: ./conftest
configure:3968: $? = 0
configure:3983: result: no
configure:3988: checking for suffix of object files
configure:4010: gcc -c -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:4014: $? = 0
configure:4035: result: o
configure:4039: checking whether we are using the GNU C compiler
configure:4058: gcc -c -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:4058: $? = 0
configure:4067: result: yes
configure:4076: checking whether gcc accepts -g
configure:4096: gcc -c -g -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:4096: $? = 0
configure:4137: result: yes
configure:4154: checking for gcc option to accept ISO C89
configure:4217: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:4217: $? = 0
configure:4230: result: none needed
configure:4255: checking whether gcc understands -c and -o together
configure:4277: gcc -c conftest.c -o conftest2.o
configure:4280: $? = 0
configure:4277: gcc -c conftest.c -o conftest2.o
configure:4280: $? = 0
configure:4292: result: yes
configure:4312: checking whether make supports the include directive
configure:4327: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:4330: $? = 0
configure:4349: result: yes (GNU style)
configure:4374: checking dependency style of gcc
configure:4485: result: gcc3
configure:4551: checking how to print strings
configure:4578: result: printf
configure:4599: checking for a sed that does not truncate output
configure:4663: result: /data/data/com.termux/files/usr/bin/sed
configure:4681: checking for grep that handles long lines and -e
configure:4739: result: /data/data/com.termux/files/usr/bin/grep
configure:4744: checking for egrep
configure:4806: result: /data/data/com.termux/files/usr/bin/grep -E
configure:4811: checking for fgrep
configure:4873: result: /data/data/com.termux/files/usr/bin/grep -F
configure:4908: checking for ld used by gcc
configure:4975: result: /data/data/com.termux/files/usr/bin/ld
configure:4982: checking if the linker (/data/data/com.termux/files/usr/bin/ld) is GNU ld
configure:4997: result: yes
configure:5009: checking for BSD- or MS-compatible name lister (nm)
configure:5063: result: /data/data/com.termux/files/usr/bin/nm -B
configure:5193: checking the name lister (/data/data/com.termux/files/usr/bin/nm -B) interface
configure:5200: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:5203: /data/data/com.termux/files/usr/bin/nm -B "conftest.o"
configure:5206: output
0000000000000000 B some_variable
configure:5213: result: BSD nm
configure:5216: checking whether ln -s works
configure:5220: result: yes
configure:5228: checking the maximum length of command line arguments
configure:5359: result: 32768
configure:5407: checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format
configure:5447: result: func_convert_file_noop
configure:5454: checking how to convert aarch64-unknown-linux-gnu file names to toolchain format
configure:5474: result: func_convert_file_noop
configure:5481: checking for /data/data/com.termux/files/usr/bin/ld option to reload object files
configure:5488: result: -r
configure:5562: checking for objdump
configure:5578: found /data/data/com.termux/files/usr/bin/objdump
configure:5589: result: objdump
configure:5621: checking how to recognize dependent libraries
configure:5821: result: pass_all
configure:5906: checking for dlltool
configure:5936: result: no
configure:5966: checking how to associate runtime and link libraries
configure:5993: result: printf %s\n
configure:6054: checking for ar
configure:6070: found /data/data/com.termux/files/usr/bin/ar
configure:6081: result: ar
configure:6118: checking for archiver @FILE support
configure:6135: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:6135: $? = 0
configure:6138: ar cru libconftest.a @conftest.lst >&5
configure:6141: $? = 0
configure:6146: ar cru libconftest.a @conftest.lst >&5
ar: conftest.o: No such file or directory
configure:6149: $? = 1
configure:6161: result: @
configure:6219: checking for strip
configure:6235: found /data/data/com.termux/files/usr/bin/strip
configure:6246: result: strip
configure:6318: checking for ranlib
configure:6334: found /data/data/com.termux/files/usr/bin/ranlib
configure:6345: result: ranlib
configure:6447: checking command to parse /data/data/com.termux/files/usr/bin/nm -B output from gcc object
configure:6600: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:6603: $? = 0
configure:6607: /data/data/com.termux/files/usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/  /p' | sed '/ __gnu_lto/d' \> conftest.nm
configure:6610: $? = 0
configure:6676: gcc -o conftest -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c conftstm.o >&5
configure:6679: $? = 0
configure:6717: result: ok
configure:6764: checking for sysroot
configure:6794: result: no
configure:6801: checking for a working dd
configure:6839: result: /data/data/com.termux/files/usr/bin/applets/dd
configure:6843: checking how to truncate binary pipes
configure:6858: result: /data/data/com.termux/files/usr/bin/applets/dd bs=4096 count=1
configure:7187: checking for mt
configure:7217: result: no
configure:7237: checking if : is a manifest tool
configure:7243: : '-?'
configure:7251: result: no
configure:7928: checking how to run the C preprocessor
configure:7959: gcc -E -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c
configure:7959: $? = 0
configure:7973: gcc -E -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c
conftest.c:11:10: fatal error: 'ac_nonexistent.h' file not found
#include <ac_nonexistent.h>
^~~~~~~~~~~~~~~~~~
1 error generated.
configure:7973: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gobject-introspection"
| #define PACKAGE_TARNAME "gobject-introspection"
| #define PACKAGE_VERSION "1.56.1"
| #define PACKAGE_STRING "gobject-introspection 1.56.1"
| #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=gobject-introspection"
| #define PACKAGE_URL ""
| #define PACKAGE "gobject-introspection"
| #define VERSION "1.56.1"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7998: result: gcc -E
configure:8018: gcc -E -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c
configure:8018: $? = 0
configure:8032: gcc -E -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c
conftest.c:11:10: fatal error: 'ac_nonexistent.h' file not found
#include <ac_nonexistent.h>
^~~~~~~~~~~~~~~~~~
1 error generated.
configure:8032: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gobject-introspection"
| #define PACKAGE_TARNAME "gobject-introspection"
| #define PACKAGE_VERSION "1.56.1"
| #define PACKAGE_STRING "gobject-introspection 1.56.1"
| #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=gobject-introspection"
| #define PACKAGE_URL ""
| #define PACKAGE "gobject-introspection"
| #define VERSION "1.56.1"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:8061: checking for ANSI C header files
configure:8081: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8081: $? = 0
configure:8154: gcc -o conftest -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8154: $? = 0
configure:8154: ./conftest
configure:8154: $? = 0
configure:8165: result: yes
configure:8178: checking for sys/types.h
configure:8178: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8178: $? = 0
configure:8178: result: yes
configure:8178: checking for sys/stat.h
configure:8178: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8178: $? = 0
configure:8178: result: yes
configure:8178: checking for stdlib.h
configure:8178: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8178: $? = 0
configure:8178: result: yes
configure:8178: checking for string.h
configure:8178: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8178: $? = 0
configure:8178: result: yes
configure:8178: checking for memory.h
configure:8178: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8178: $? = 0
configure:8178: result: yes
configure:8178: checking for strings.h
configure:8178: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8178: $? = 0
configure:8178: result: yes
configure:8178: checking for inttypes.h
configure:8178: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8178: $? = 0
configure:8178: result: yes
configure:8178: checking for stdint.h
configure:8178: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8178: $? = 0
configure:8178: result: yes
configure:8178: checking for unistd.h
configure:8178: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8178: $? = 0
configure:8178: result: yes
configure:8192: checking for dlfcn.h
configure:8192: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:8192: $? = 0
configure:8192: result: yes
configure:8448: checking for objdir
configure:8463: result: .libs
configure:8727: checking if gcc supports -fno-rtti -fno-exceptions
configure:8745: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ -fno-rtti -fno-exceptions conftest.c >&5
configure:8749: $? = 0
configure:8762: result: yes
configure:9120: checking for gcc option to produce PIC
configure:9127: result: -fPIC -DPIC
configure:9135: checking if gcc PIC flag -fPIC -DPIC works
configure:9153: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ -fPIC -DPIC -DPIC conftest.c >&5
configure:9157: $? = 0
configure:9170: result: yes
configure:9199: checking if gcc static flag -static works
configure:9227: result: no
configure:9242: checking if gcc supports -c -o file.o
configure:9263: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ -o out/conftest2.o conftest.c >&5
configure:9267: $? = 0
configure:9289: result: yes
configure:9297: checking if gcc supports -c -o file.o
configure:9344: result: yes
configure:9377: checking whether the gcc linker (/data/data/com.termux/files/usr/bin/ld) supports shared libraries
configure:10636: result: yes
configure:10673: checking whether -lc should be explicitly linked in
configure:10681: gcc -c -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:10684: $? = 0
configure:10699: gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /data/data/com.termux/files/usr/bin/grep -lc \>/dev/null 2\>\&1
configure:10702: $? = 0
configure:10716: result: no
configure:10876: checking dynamic linker characteristics
configure:11457: gcc -o conftest -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ -Wl,-rpath -Wl,/foo conftest.c >&5
configure:11457: $? = 0
configure:11694: result: GNU/Linux ld.so
configure:11816: checking how to hardcode library paths into programs
configure:11841: result: immediate
configure:12389: checking whether stripping libraries is possible
configure:12394: result: yes
configure:12429: checking if libtool supports shared libraries
configure:12431: result: yes
configure:12434: checking whether to build shared libraries
configure:12459: result: yes
configure:12462: checking whether to build static libraries
configure:12466: result: yes
configure:12558: checking for pkg-config
configure:12576: found /data/data/com.termux/files/usr/bin/pkg-config
configure:12588: result: /data/data/com.termux/files/usr/bin/pkg-config
configure:12613: checking pkg-config is at least version 0.9.0
configure:12616: result: yes
configure:12629: checking for flex
configure:12645: found /data/data/com.termux/files/usr/bin/flex
configure:12656: result: flex
configure:12694: flex conftest.l
configure:12698: $? = 0
configure:12700: checking lex output file root
configure:12714: result: lex.yy
configure:12719: checking lex library
configure:12733: gcc -o conftest -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
/data/data/com.termux/files/usr/bin/ld: /data/data/com.termux/files/usr/tmp/conftest-7391f5.o: in function `yylex':
/data/data/com.termux/files/home/gobject-introspection-1.56.1/lex.yy.c:870: undefined reference to `yywrap'
/data/data/com.termux/files/usr/bin/ld: /data/data/com.termux/files/usr/tmp/conftest-7391f5.o: in function `input':
/data/data/com.termux/files/home/gobject-introspection-1.56.1/lex.yy.c:1179: undefined reference to `yywrap'
/data/data/com.termux/files/usr/bin/ld: /data/data/com.termux/files/usr/tmp/conftest-7391f5.o: in function `main':
/data/data/com.termux/files/home/gobject-introspection-1.56.1/conftest.l:17: undefined reference to `yywrap'
clang-6.0: error: linker command failed with exit code 1 (use -v to see invocation)
configure:12733: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gobject-introspection"
| #define PACKAGE_TARNAME "gobject-introspection"
| #define PACKAGE_VERSION "1.56.1"
| #define PACKAGE_STRING "gobject-introspection 1.56.1"
| #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=gobject-introspection"
| #define PACKAGE_URL ""
| #define PACKAGE "gobject-introspection"
| #define VERSION "1.56.1"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h. */
|
| #line 2 "lex.yy.c"
|
| #define YY_INT_ALIGNED short int
|
| /* A lexical scanner generated by flex */
|
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 6
| #define YY_FLEX_SUBMINOR_VERSION 4
| #if YY_FLEX_SUBMINOR_VERSION > 0
| #define FLEX_BETA
| #endif
|
| /* First, we deal with platform-specific or compiler-specific issues. */
|
| /* begin standard C headers. */
| #include <stdio.h>
| #include <string.h>
| #include <errno.h>
| #include <stdlib.h>
|
| /* end standard C headers. */
|
| /* flex integer type definitions */
|
| #ifndef FLEXINT_H
| #define FLEXINT_H
|
| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
|
| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
|
| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
| * if you want the limit (max/min) macros for int types.
| */
| #ifndef __STDC_LIMIT_MACROS
| #define __STDC_LIMIT_MACROS 1
| #endif
|
| #include <inttypes.h>
| typedef int8_t flex_int8_t;
| typedef uint8_t flex_uint8_t;
| typedef int16_t flex_int16_t;
| typedef uint16_t flex_uint16_t;
| typedef int32_t flex_int32_t;
| typedef uint32_t flex_uint32_t;
| #else
| typedef signed char flex_int8_t;
| typedef short int flex_int16_t;
| typedef int flex_int32_t;
| typedef unsigned char flex_uint8_t;
| typedef unsigned short int flex_uint16_t;
| typedef unsigned int flex_uint32_t;
|
| /* Limits of integral types. */
| #ifndef INT8_MIN
| #define INT8_MIN (-128)
| #endif
| #ifndef INT16_MIN
| #define INT16_MIN (-32767-1)
| #endif
| #ifndef INT32_MIN
| #define INT32_MIN (-2147483647-1)
| #endif
| #ifndef INT8_MAX
| #define INT8_MAX (127)
| #endif
| #ifndef INT16_MAX
| #define INT16_MAX (32767)
| #endif
| #ifndef INT32_MAX
| #define INT32_MAX (2147483647)
| #endif
| #ifndef UINT8_MAX
| #define UINT8_MAX (255U)
| #endif
| #ifndef UINT16_MAX
| #define UINT16_MAX (65535U)
| #endif
| #ifndef UINT32_MAX
| #define UINT32_MAX (4294967295U)
| #endif
|
| #ifndef SIZE_MAX
| #define SIZE_MAX (~(size_t)0)
| #endif
|
| #endif /* ! C99 */
|
| #endif /* ! FLEXINT_H */
|
| /* begin standard C++ headers. */
|
| /* TODO: this is always defined, so inline it */
| #define yyconst const
|
| #if defined(__GNUC__) && __GNUC__ >= 3
| #define yynoreturn __attribute__((__noreturn__))
| #else
| #define yynoreturn
| #endif
|
| /* Returned upon end-of-file. */
| #define YY_NULL 0
|
| /* Promotes a possibly negative, possibly signed char to an
| * integer in range [0..255] for use as an array index.
| */
| #define YY_SC_TO_UI(c) ((YY_CHAR) (c))
|
| /* Enter a start condition. This macro really ought to take a parameter,
| * but we do it the disgusting crufty way forced on us by the ()-less
| * definition of BEGIN.
| */
| #define BEGIN (yy_start) = 1 + 2 *
| /* Translate the current start state into a value that can be later handed
| * to BEGIN to return to the state. The YYSTATE alias is for lex
| * compatibility.
| */
| #define YY_START (((yy_start) - 1) / 2)
| #define YYSTATE YY_START
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart( yyin )
| #define YY_END_OF_BUFFER_CHAR 0
|
| /* Size of default input buffer. */
| #ifndef YY_BUF_SIZE
| #ifdef __ia64__
| /* On IA-64, the buffer size is 16k, not 8k.
| * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
| * Ditto for the __ia64__ case accordingly.
| */
| #define YY_BUF_SIZE 32768
| #else
| #define YY_BUF_SIZE 16384
| #endif /* __ia64__ */
| #endif
|
| /* The state buf must be large enough to hold one state per character in the main buffer.
| */
| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
|
| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
| #define YY_TYPEDEF_YY_BUFFER_STATE
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
| #endif
|
| #ifndef YY_TYPEDEF_YY_SIZE_T
| #define YY_TYPEDEF_YY_SIZE_T
| typedef size_t yy_size_t;
| #endif
|
| extern int yyleng;
|
| extern FILE *yyin, *yyout;
|
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
|
| #define YY_LESS_LINENO(n)
| #define YY_LINENO_REWIND_TO(ptr)
|
| /* Return all but the first "n" matched characters back to the input stream. */
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| *yy_cp = (yy_hold_char); \
| YY_RESTORE_YY_MORE_OFFSET \
| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| } \
| while ( 0 )
| #define unput(c) yyunput( c, (yytext_ptr) )
|
| #ifndef YY_STRUCT_YY_BUFFER_STATE
| #define YY_STRUCT_YY_BUFFER_STATE
| struct yy_buffer_state
| {
| FILE *yy_input_file;
|
| char *yy_ch_buf; /* input buffer */
| char *yy_buf_pos; /* current position in input buffer */
|
| /* Size of input buffer in bytes, not including room for EOB
| * characters.
| */
| int yy_buf_size;
|
| /* Number of characters read into yy_ch_buf, not including EOB
| * characters.
| */
| int yy_n_chars;
|
| /* Whether we "own" the buffer - i.e., we know we created it,
| * and can realloc() it to grow it, and should free() it to
| * delete it.
| */
| int yy_is_our_buffer;
|
| /* Whether this is an "interactive" input source; if so, and
| * if we're using stdio for input, then we want to use getc()
| * instead of fread(), to make sure we stop fetching input after
| * each newline.
| */
| int yy_is_interactive;
|
| /* Whether we're considered to be at the beginning of a line.
| * If so, '^' rules will be active on the next match, otherwise
| * not.
| */
| int yy_at_bol;
|
| int yy_bs_lineno; /**< The line count. */
| int yy_bs_column; /**< The column count. */
|
| /* Whether to try to fill the input buffer when we reach the
| * end of it.
| */
| int yy_fill_buffer;
|
| int yy_buffer_status;
|
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| /* When an EOF's been seen but there's still some text to process
| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| * shouldn't try reading from the input source any more. We might
| * still have a bunch of tokens to match, though, because of
| * possible backing-up.
| *
| * When we actually see the EOF, we change the status to "new"
| * (via yyrestart()), so that the user can continue scanning by
| * just pointing yyin at a new input file.
| */
| #define YY_BUFFER_EOF_PENDING 2
|
| };
| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
|
| /* Stack of input buffers. */
| static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
| static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
| static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */
|
| /* We provide macros for accessing buffer states in case in the
| * future we want to put the buffer states in a more general
| * "scanner state".
| *
| * Returns the top of the stack, or NULL.
| */
| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
| : NULL)
| /* Same as previous macro, but useful when we know that the buffer stack is not
| * NULL or when we need an lvalue. For internal use only.
| */
| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
|
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
| static int yy_n_chars; /* number of characters read into yy_ch_buf */
| int yyleng;
|
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = NULL;
| static int yy_init = 0; /* whether we need to initialize */
| static int yy_start = 0; /* start state number */
|
| /* Flag which is used to allow yywrap()'s to do buffer switches
| * instead of setting up a fresh yyin. A bit of a hack ...
| */
| static int yy_did_buffer_switch_on_eof;
|
| void yyrestart ( FILE *input_file );
| void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer );
| YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size );
| void yy_delete_buffer ( YY_BUFFER_STATE b );
| void yy_flush_buffer ( YY_BUFFER_STATE b );
| void yypush_buffer_state ( YY_BUFFER_STATE new_buffer );
| void yypop_buffer_state ( void );
|
| static void yyensure_buffer_stack ( void );
| static void yy_load_buffer_state ( void );
| static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file );
| #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER )
|
| YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size );
| YY_BUFFER_STATE yy_scan_string ( const char *yy_str );
| YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len );
|
| void *yyalloc ( yy_size_t );
| void *yyrealloc ( void *, yy_size_t );
| void yyfree ( void * );
|
| #define yy_new_buffer yy_create_buffer
| #define yy_set_interactive(is_interactive) \
| { \
| if ( ! YY_CURRENT_BUFFER ){ \
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer( yyin, YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
| }
| #define yy_set_bol(at_bol) \
| { \
| if ( ! YY_CURRENT_BUFFER ){\
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer( yyin, YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
| }
| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
|
| /* Begin user sect3 */
| typedef flex_uint8_t YY_CHAR;
|
| FILE *yyin = NULL, *yyout = NULL;
|
| typedef int yy_state_type;
|
| extern int yylineno;
| int yylineno = 1;
|
| extern char *yytext;
| #ifdef yytext_ptr
| #undef yytext_ptr
| #endif
| #define yytext_ptr yytext
|
| static yy_state_type yy_get_previous_state ( void );
| static yy_state_type yy_try_NUL_trans ( yy_state_type current_state );
| static int yy_get_next_buffer ( void );
| static void yynoreturn yy_fatal_error ( const char* msg );
|
| /* Done after the current pattern has been matched and before the
| * corresponding action - sets up yytext.
| */
| #define YY_DO_BEFORE_ACTION \
| (yytext_ptr) = yy_bp; \
| (yytext_ptr) -= (yy_more_len); \
| yyleng = (int) (yy_cp - (yytext_ptr)); \
| (yy_hold_char) = *yy_cp; \
| *yy_cp = '\0'; \
| (yy_c_buf_p) = yy_cp;
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| /* This struct is not used in this scanner,
| but its presence is necessary. */
| struct yy_trans_info
| {
| flex_int32_t yy_verify;
| flex_int32_t yy_nxt;
| };
| static const flex_int16_t yy_acclist[23] =
| { 0,
| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
| 7, 8
| } ;
|
| static const flex_int16_t yy_accept[14] =
| { 0,
| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
| 20, 23, 23
| } ;
|
| static const YY_CHAR yy_ec[256] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
|
| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1
| } ;
|
| static const YY_CHAR yy_meta[9] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1
| } ;
|
| static const flex_int16_t yy_base[13] =
| { 0,
| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
| 10, 10
| } ;
|
| static const flex_int16_t yy_def[13] =
| { 0,
| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
| 12, 0
| } ;
|
| static const flex_int16_t yy_nxt[19] =
| { 0,
| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| static const flex_int16_t yy_chk[19] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| extern int yy_flex_debug;
| int yy_flex_debug = 0;
|
| static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
| ++(yy_lp); \
| goto find_rule; \
| }
|
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() ((yy_more_flag) = 1)
| #define YY_MORE_ADJ (yy_more_len)
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #line 459 "lex.yy.c"
|
| #define INITIAL 0
|
| #ifndef YY_NO_UNISTD_H
| /* Special case for "unistd.h", since it is non-ANSI. We include it way
| * down here because we want the user's section 1 to have been scanned first.
| * The user has a chance to override it with an option.
| */
| #include <unistd.h>
| #endif
|
| #ifndef YY_EXTRA_TYPE
| #define YY_EXTRA_TYPE void *
| #endif
|
| static int yy_init_globals ( void );
|
| /* Accessor methods to globals.
| These are made visible to non-reentrant scanners for convenience. */
|
| int yylex_destroy ( void );
|
| int yyget_debug ( void );
|
| void yyset_debug ( int debug_flag );
|
| YY_EXTRA_TYPE yyget_extra ( void );
|
| void yyset_extra ( YY_EXTRA_TYPE user_defined );
|
| FILE *yyget_in ( void );
|
| void yyset_in ( FILE * _in_str );
|
| FILE *yyget_out ( void );
|
| void yyset_out ( FILE * _out_str );
|
| int yyget_leng ( void );
|
| char *yyget_text ( void );
|
| int yyget_lineno ( void );
|
| void yyset_lineno ( int _line_number );
|
| /* Macros after this point can all be overridden by user definitions in
| * section 1.
| */
|
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap ( void );
| #else
| extern int yywrap ( void );
| #endif
| #endif
|
| #ifndef YY_NO_UNPUT
|
| static void yyunput ( int c, char *buf_ptr );
|
| #endif
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy ( char *, const char *, int );
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen ( const char * );
| #endif
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput ( void );
| #else
| static int input ( void );
| #endif
|
| #endif
|
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #ifdef __ia64__
| /* On IA-64, the buffer size is 16k, not 8k */
| #define YY_READ_BUF_SIZE 16384
| #else
| #define YY_READ_BUF_SIZE 8192
| #endif /* __ia64__ */
| #endif
|
| /* Copy whatever the last rule matched to the standard output. */
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
| * we now use fwrite().
| */
| #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0)
| #endif
|
| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
| * is returned in "result".
| */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
| { \
| int c = '*'; \
| int n; \
| for ( n = 0; n < max_size && \
| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| buf[n] = (char) c; \
| if ( c == '\n' ) \
| buf[n++] = (char) c; \
| if ( c == EOF && ferror( yyin ) ) \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| result = n; \
| } \
| else \
| { \
| errno=0; \
| while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \
| { \
| if( errno != EINTR) \
| { \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| break; \
| } \
| errno=0; \
| clearerr(yyin); \
| } \
| }\
| \
|
| #endif
|
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
| * we don't want an extra ';' after the "return" because that will cause
| * some compilers to complain about unreachable statements.
| */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
|
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
|
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
|
| /* end tables serialization structures and prototypes */
|
| /* Default declaration of generated scanner - a define so the user can
| * easily add parameters.
| */
| #ifndef YY_DECL
| #define YY_DECL_IS_OURS 1
|
| extern int yylex (void);
|
| #define YY_DECL int yylex (void)
| #endif /* !YY_DECL */
|
| /* Code executed at the beginning of each rule, after yytext and yyleng
| * have been set up.
| */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
|
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK /*LINTED*/break;
| #endif
|
| #define YY_RULE_SETUP \
| YY_USER_ACTION
|
| /** The main scanner function which does all the work.
| */
| YY_DECL
| {
| yy_state_type yy_current_state;
| char *yy_cp, *yy_bp;
| int yy_act;
|
| if ( !(yy_init) )
| {
| (yy_init) = 1;
|
| #ifdef YY_USER_INIT
| YY_USER_INIT;
| #endif
|
| /* Create the reject buffer large enough to save one state per allowed character. */
| if ( ! (yy_state_buf) )
| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
| if ( ! (yy_state_buf) )
| YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
|
| if ( ! (yy_start) )
| (yy_start) = 1; /* first start state */
|
| if ( ! yyin )
| yyin = stdin;
|
| if ( ! yyout )
| yyout = stdout;
|
| if ( ! YY_CURRENT_BUFFER ) {
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer( yyin, YY_BUF_SIZE );
| }
|
| yy_load_buffer_state( );
| }
|
| {
| #line 1 "conftest.l"
|
| #line 684 "lex.yy.c"
|
| while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */
| {
| (yy_more_len) = 0;
| if ( (yy_more_flag) )
| {
| (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr));
| (yy_more_flag) = 0;
| }
| yy_cp = (yy_c_buf_p);
|
| /* Support of yytext. */
| *yy_cp = (yy_hold_char);
|
| /* yy_bp points to the position in yy_ch_buf of the start of
| * the current run.
| */
| yy_bp = yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| yy_match:
| do
| {
| YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| ++yy_cp;
| }
| while ( yy_base[yy_current_state] != 10 );
|
| yy_find_action:
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
|
| find_rule: /* we branch to this label when backing up */
|
| for ( ; ; ) /* until we find what rule we matched */
| {
| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
| {
| yy_act = yy_acclist[(yy_lp)];
| {
| (yy_full_match) = yy_cp;
| break;
| }
| }
| --yy_cp;
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| }
|
| YY_DO_BEFORE_ACTION;
|
| do_action: /* This label is used only to access EOF actions. */
|
| switch ( yy_act )
| { /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */
| yyless ((input () != 0)); }
| YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { unput (yytext[0]); }
| YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| { BEGIN INITIAL; }
| YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 10 "conftest.l"
| ECHO;
| YY_BREAK
| #line 793 "lex.yy.c"
| case YY_STATE_EOF(INITIAL):
| yyterminate();
|
| case YY_END_OF_BUFFER:
| {
| /* Amount of text matched not including the EOB char. */
| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
|
| /* Undo the effects of YY_DO_BEFORE_ACTION. */
| *yy_cp = (yy_hold_char);
| YY_RESTORE_YY_MORE_OFFSET
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
| {
| /* We're scanning a new file or input source. It's
| * possible that this happened because the user
| * just pointed yyin at a new source and called
| * yylex(). If so, then we have to assure
| * consistency between YY_CURRENT_BUFFER and our
| * globals. Here is the right place to do so, because
| * this is the first action (other than possibly a
| * back-up) that will match for the new input source.
| */
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
| }
|
| /* Note that here we test for yy_c_buf_p "<=" to the position
| * of the first EOB in the buffer, since yy_c_buf_p will
| * already have been incremented past the NUL character
| * (since all states make transitions on EOB to the
| * end-of-buffer state). Contrast this with the test
| * in input().
| */
| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| { /* This was really a NUL. */
| yy_state_type yy_next_state;
|
| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| /* Okay, we're now positioned to make the NUL
| * transition. We couldn't have
| * yy_get_previous_state() go ahead and do it
| * for us because it doesn't know how to deal
| * with the possibility of jamming (and we don't
| * want to build jamming into it because then it
| * will run more slowly).
| */
|
| yy_next_state = yy_try_NUL_trans( yy_current_state );
|
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
|
| if ( yy_next_state )
| {
| /* Consume the NUL. */
| yy_cp = ++(yy_c_buf_p);
| yy_current_state = yy_next_state;
| goto yy_match;
| }
|
| else
| {
| yy_cp = (yy_c_buf_p);
| goto yy_find_action;
| }
| }
|
| else switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_END_OF_FILE:
| {
| (yy_did_buffer_switch_on_eof) = 0;
|
| if ( yywrap( ) )
| {
| /* Note: because we've taken care in
| * yy_get_next_buffer() to have set up
| * yytext, we can now set up
| * yy_c_buf_p so that if some total
| * hoser (like flex itself) wants to
| * call the scanner after we return the
| * YY_NULL, it'll still work - another
| * YY_NULL will get returned.
| */
| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
|
| yy_act = YY_STATE_EOF(YY_START);
| goto do_action;
| }
|
| else
| {
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| }
| break;
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) =
| (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_match;
|
| case EOB_ACT_LAST_MATCH:
| (yy_c_buf_p) =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_find_action;
| }
| break;
| }
|
| default:
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--no action found" );
| } /* end of action switch */
| } /* end of scanning one token */
| } /* end of user's declarations */
| } /* end of yylex */
|
| /* yy_get_next_buffer - try to read in a new buffer
| *
| * Returns a code representing an action:
| * EOB_ACT_LAST_MATCH -
| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
| * EOB_ACT_END_OF_FILE - end of file
| */
| static int yy_get_next_buffer (void)
| {
| char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
| char *source = (yytext_ptr);
| int number_to_move, i;
| int ret_val;
|
| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--end of buffer missed" );
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
| { /* Don't try to fill the buffer, so this is an EOF. */
| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
| {
| /* We matched a single character, the EOB, so
| * treat this as a final EOF.
| */
| return EOB_ACT_END_OF_FILE;
| }
|
| else
| {
| /* We matched some text prior to the EOB, first
| * process it.
| */
| return EOB_ACT_LAST_MATCH;
| }
| }
|
| /* Try to read more data. */
|
| /* First move last chars to start of buffer. */
| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1);
|
| for ( i = 0; i < number_to_move; ++i )
| *(dest++) = *(source++);
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| /* don't do the read, it's not guaranteed to return an EOF,
| * just force an EOF
| */
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
|
| else
| {
| int num_to_read =
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
|
| while ( num_to_read <= 0 )
| { /* Not enough room in the buffer - grow it. */
|
| YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
|
| }
|
| if ( num_to_read > YY_READ_BUF_SIZE )
| num_to_read = YY_READ_BUF_SIZE;
|
| /* Read in more data. */
| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
| (yy_n_chars), num_to_read );
|
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| if ( (yy_n_chars) == 0 )
| {
| if ( number_to_move == YY_MORE_ADJ )
| {
| ret_val = EOB_ACT_END_OF_FILE;
| yyrestart( yyin );
| }
|
| else
| {
| ret_val = EOB_ACT_LAST_MATCH;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
| YY_BUFFER_EOF_PENDING;
| }
| }
|
| else
| ret_val = EOB_ACT_CONTINUE_SCAN;
|
| if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
| /* Extend the array by 50%, plus the number we really need. */
| int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc(
| (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size );
| if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
| /* "- 2" to take care of EOB's */
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2);
| }
|
| (yy_n_chars) += number_to_move;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
|
| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
|
| return ret_val;
| }
|
| /* yy_get_previous_state - get the state just before the EOB char was reached */
|
| static yy_state_type yy_get_previous_state (void)
| {
| yy_state_type yy_current_state;
| char *yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
| {
| YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| }
|
| return yy_current_state;
| }
|
| /* yy_try_NUL_trans - try to make a transition on the NUL character
| *
| * synopsis
| * next_state = yy_try_NUL_trans( current_state );
| */
| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
| {
| int yy_is_jam;
|
| YY_CHAR yy_c = 1;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c];
| yy_is_jam = (yy_current_state == 12);
| if ( ! yy_is_jam )
| *(yy_state_ptr)++ = yy_current_state;
|
| return yy_is_jam ? 0 : yy_current_state;
| }
|
| #ifndef YY_NO_UNPUT
|
| static void yyunput (int c, char * yy_bp )
| {
| char *yy_cp;
|
| yy_cp = (yy_c_buf_p);
|
| /* undo effects of setting up yytext */
| *yy_cp = (yy_hold_char);
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| { /* need to shift things up to make room */
| /* +2 for EOB chars. */
| int number_to_move = (yy_n_chars) + 2;
| char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
| char *source =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
|
| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| *--dest = *--source;
|
| yy_cp += (int) (dest - source);
| yy_bp += (int) (dest - source);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
| (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| YY_FATAL_ERROR( "flex scanner push-back overflow" );
| }
|
| *--yy_cp = (char) c;
|
| (yytext_ptr) = yy_bp;
| (yy_hold_char) = *yy_cp;
| (yy_c_buf_p) = yy_cp;
| }
|
| #endif
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput (void)
| #else
| static int input (void)
| #endif
|
| {
| int c;
|
| *(yy_c_buf_p) = (yy_hold_char);
|
| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
| {
| /* yy_c_buf_p now points to the character we want to return.
| * If this occurs *before* the EOB characters, then it's a
| * valid NUL; if not, then we've hit the end of the buffer.
| */
| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| /* This was really a NUL. */
| *(yy_c_buf_p) = '\0';
|
| else
| { /* need more input */
| int offset = (int) ((yy_c_buf_p) - (yytext_ptr));
| ++(yy_c_buf_p);
|
| switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_LAST_MATCH:
| /* This happens because yy_g_n_b()
| * sees that we've accumulated a
| * token and flags that we need to
| * try matching the token before
| * proceeding. But for input(),
| * there's no matching to consider.
| * So convert the EOB_ACT_LAST_MATCH
| * to EOB_ACT_END_OF_FILE.
| */
|
| /* Reset buffer status. */
| yyrestart( yyin );
|
| /*FALLTHROUGH*/
|
| case EOB_ACT_END_OF_FILE:
| {
| if ( yywrap( ) )
| return 0;
|
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| #ifdef __cplusplus
| return yyinput();
| #else
| return input();
| #endif
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) = (yytext_ptr) + offset;
| break;
| }
| }
| }
|
| c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
| *(yy_c_buf_p) = '\0'; /* preserve yytext */
| (yy_hold_char) = *++(yy_c_buf_p);
|
| return c;
| }
| #endif /* ifndef YY_NO_INPUT */
|
| /** Immediately switch to a different input stream.
| * @param input_file A readable stream.
| *
| * @note This function does not reset the start condition to @c INITIAL .
| */
| void yyrestart (FILE * input_file )
| {
|
| if ( ! YY_CURRENT_BUFFER ){
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer( yyin, YY_BUF_SIZE );
| }
|
| yy_init_buffer( YY_CURRENT_BUFFER, input_file );
| yy_load_buffer_state( );
| }
|
| /** Switch to a different input buffer.
| * @param new_buffer The new input buffer.
| *
| */
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
| {
|
| /* TODO. We should be able to replace this entire function body
| * with
| * yypop_buffer_state();
| * yypush_buffer_state(new_buffer);
| */
| yyensure_buffer_stack ();
| if ( YY_CURRENT_BUFFER == new_buffer )
| return;
|
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
| yy_load_buffer_state( );
|
| /* We don't actually know whether we did this switch during
| * EOF (yywrap()) processing, but the only time this flag
| * is looked at is after yywrap() is called, so it's safe
| * to go ahead and always set it.
| */
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| static void yy_load_buffer_state (void)
| {
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
| (yy_hold_char) = *(yy_c_buf_p);
| }
|
| /** Allocate and initialize an input buffer state.
| * @param file A readable stream.
| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
| *
| * @return the allocated buffer state.
| */
| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
| {
| YY_BUFFER_STATE b;
|
| b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_buf_size = size;
|
| /* yy_ch_buf has to be 2 characters longer than the size given because
| * we need to put in 2 end-of-buffer characters.
| */
| b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) );
| if ( ! b->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_is_our_buffer = 1;
|
| yy_init_buffer( b, file );
|
| return b;
| }
|
| /** Destroy the buffer.
| * @param b a buffer created with yy_create_buffer()
| *
| */
| void yy_delete_buffer (YY_BUFFER_STATE b )
| {
|
| if ( ! b )
| return;
|
| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
|
| if ( b->yy_is_our_buffer )
| yyfree( (void *) b->yy_ch_buf );
|
| yyfree( (void *) b );
| }
|
| /* Initializes or reinitializes a buffer.
| * This function is sometimes called more than once on the same buffer,
| * such as during a yyrestart() or at EOF.
| */
| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
|
| {
| int oerrno = errno;
|
| yy_flush_buffer( b );
|
| b->yy_input_file = file;
| b->yy_fill_buffer = 1;
|
| /* If b is the current buffer, then yy_init_buffer was _probably_
| * called from yyrestart() or through yy_get_next_buffer.
| * In that case, we don't want to reset the lineno or column.
| */
| if (b != YY_CURRENT_BUFFER){
| b->yy_bs_lineno = 1;
| b->yy_bs_column = 0;
| }
|
| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
|
| errno = oerrno;
| }
|
| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
| *
| */
| void yy_flush_buffer (YY_BUFFER_STATE b )
| {
| if ( ! b )
| return;
|
| b->yy_n_chars = 0;
|
| /* We always need two end-of-buffer characters. The first causes
| * a transition to the end-of-buffer state. The second causes
| * a jam in that state.
| */
| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
|
| b->yy_buf_pos = &b->yy_ch_buf[0];
|
| b->yy_at_bol = 1;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| if ( b == YY_CURRENT_BUFFER )
| yy_load_buffer_state( );
| }
|
| /** Pushes the new state onto the stack. The new state becomes
| * the current state. This function will allocate the stack
| * if necessary.
| * @param new_buffer The new state.
| *
| */
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
| {
| if (new_buffer == NULL)
| return;
|
| yyensure_buffer_stack();
|
| /* This block is copied from yy_switch_to_buffer. */
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| /* Only push if top exists. Otherwise, replace top. */
| if (YY_CURRENT_BUFFER)
| (yy_buffer_stack_top)++;
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
|
| /* copied from yy_switch_to_buffer. */
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| /** Removes and deletes the top of the stack, if present.
| * The next element becomes the new top.
| *
| */
| void yypop_buffer_state (void)
| {
| if (!YY_CURRENT_BUFFER)
| return;
|
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| if ((yy_buffer_stack_top) > 0)
| --(yy_buffer_stack_top);
|
| if (YY_CURRENT_BUFFER) {
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
| }
|
| /* Allocates the stack if it does not exist.
| * Guarantees space for at least one push.
| */
| static void yyensure_buffer_stack (void)
| {
| yy_size_t num_to_alloc;
|
| if (!(yy_buffer_stack)) {
|
| /* First allocation is just for 2 elements, since we don't know if this
| * scanner will even need a stack. We use 2 instead of 1 to avoid an
| * immediate realloc on the next call.
| */
| num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */
| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
| (num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
|
| (yy_buffer_stack_max) = num_to_alloc;
| (yy_buffer_stack_top) = 0;
| return;
| }
|
| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
|
| /* Increase the buffer to prepare for a possible push. */
| yy_size_t grow_size = 8 /* arbitrary grow size */;
|
| num_to_alloc = (yy_buffer_stack_max) + grow_size;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
| ((yy_buffer_stack),
| num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| /* zero only the new slots.*/
| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
| (yy_buffer_stack_max) = num_to_alloc;
| }
| }
|
| /** Setup the input buffer state to scan directly from a user-specified character buffer.
| * @param base the character buffer
| * @param size the size in bytes of the character buffer
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
| {
| YY_BUFFER_STATE b;
|
| if ( size < 2 ||
| base[size-2] != YY_END_OF_BUFFER_CHAR ||
| base[size-1] != YY_END_OF_BUFFER_CHAR )
| /* They forgot to leave room for the EOB's. */
| return NULL;
|
| b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
|
| b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */
| b->yy_buf_pos = b->yy_ch_buf = base;
| b->yy_is_our_buffer = 0;
| b->yy_input_file = NULL;
| b->yy_n_chars = b->yy_buf_size;
| b->yy_is_interactive = 0;
| b->yy_at_bol = 1;
| b->yy_fill_buffer = 0;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| yy_switch_to_buffer( b );
|
| return b;
| }
|
| /** Setup the input buffer state to scan a string. The next call to yylex() will
| * scan from a @e copy of @a str.
| * @param yystr a NUL-terminated string to scan
| *
| * @return the newly allocated buffer state object.
| * @note If you want to scan bytes that may contain NUL values, then use
| * yy_scan_bytes() instead.
| */
| YY_BUFFER_STATE yy_scan_string (const char * yystr )
| {
|
| return yy_scan_bytes( yystr, (int) strlen(yystr) );
| }
|
| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
| * scan from a @e copy of @a bytes.
| * @param yybytes the byte buffer to scan
| * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len )
| {
| YY_BUFFER_STATE b;
| char *buf;
| yy_size_t n;
| int i;
|
| /* Get memory for full buffer, including space for trailing EOB's. */
| n = (yy_size_t) (_yybytes_len + 2);
| buf = (char *) yyalloc( n );
| if ( ! buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
|
| for ( i = 0; i < _yybytes_len; ++i )
| buf[i] = yybytes[i];
|
| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
|
| b = yy_scan_buffer( buf, n );
| if ( ! b )
| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
|
| /* It's okay to grow etc. this buffer, and we should throw it
| * away when we're done.
| */
| b->yy_is_our_buffer = 1;
|
| return b;
| }
|
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
|
| static void yynoreturn yy_fatal_error (const char* msg )
| {
| fprintf( stderr, "%s\n", msg );
| exit( YY_EXIT_FAILURE );
| }
|
| /* Redefine yyless() so it works in section 3 code. */
|
| #undef yyless
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| yytext[yyleng] = (yy_hold_char); \
| (yy_c_buf_p) = yytext + yyless_macro_arg; \
| (yy_hold_char) = *(yy_c_buf_p); \
| *(yy_c_buf_p) = '\0'; \
| yyleng = yyless_macro_arg; \
| } \
| while ( 0 )
|
| /* Accessor methods (get/set functions) to struct members. */
|
| /** Get the current line number.
| *
| */
| int yyget_lineno (void)
| {
|
| return yylineno;
| }
|
| /** Get the input stream.
| *
| */
| FILE *yyget_in (void)
| {
| return yyin;
| }
|
| /** Get the output stream.
| *
| */
| FILE *yyget_out (void)
| {
| return yyout;
| }
|
| /** Get the length of the current token.
| *
| */
| int yyget_leng (void)
| {
| return yyleng;
| }
|
| /** Get the current token.
| *
| */
|
| char *yyget_text (void)
| {
| return yytext;
| }
|
| /** Set the current line number.
| * @param _line_number line number
| *
| */
| void yyset_lineno (int _line_number )
| {
|
| yylineno = _line_number;
| }
|
| /** Set the input stream. This does not discard the current
| * input buffer.
| * @param _in_str A readable stream.
| *
| * @see yy_switch_to_buffer
| */
| void yyset_in (FILE * _in_str )
| {
| yyin = _in_str ;
| }
|
| void yyset_out (FILE * _out_str )
| {
| yyout = _out_str ;
| }
|
| int yyget_debug (void)
| {
| return yy_flex_debug;
| }
|
| void yyset_debug (int _bdebug )
| {
| yy_flex_debug = _bdebug ;
| }
|
| static int yy_init_globals (void)
| {
| /* Initialization is the same as for the non-reentrant scanner.
| * This function is called from yylex_destroy(), so don't allocate here.
| */
|
| (yy_buffer_stack) = NULL;
| (yy_buffer_stack_top) = 0;
| (yy_buffer_stack_max) = 0;
| (yy_c_buf_p) = NULL;
| (yy_init) = 0;
| (yy_start) = 0;
|
| (yy_state_buf) = 0;
| (yy_state_ptr) = 0;
| (yy_full_match) = 0;
| (yy_lp) = 0;
|
| /* Defined in main.c */
| #ifdef YY_STDINIT
| yyin = stdin;
| yyout = stdout;
| #else
| yyin = NULL;
| yyout = NULL;
| #endif
|
| /* For future reference: Set errno on error, since we are called by
| * yylex_init()
| */
| return 0;
| }
|
| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
| int yylex_destroy (void)
| {
|
| /* Pop the buffer stack, destroying each element. */
| while(YY_CURRENT_BUFFER){
| yy_delete_buffer( YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| yypop_buffer_state();
| }
|
| /* Destroy the stack itself. */
| yyfree((yy_buffer_stack) );
| (yy_buffer_stack) = NULL;
|
| yyfree ( (yy_state_buf) );
| (yy_state_buf) = NULL;
|
| /* Reset the globals. This is important in a non-reentrant scanner so the next time
| * yylex() is called, initialization will occur. */
| yy_init_globals( );
|
| return 0;
| }
|
| /*
| * Internal utility routines.
| */
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char* s1, const char * s2, int n )
| {
|
| int i;
| for ( i = 0; i < n; ++i )
| s1[i] = s2[i];
| }
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (const char * s )
| {
| int n;
| for ( n = 0; s[n]; ++n )
| ;
|
| return n;
| }
| #endif
|
| void *yyalloc (yy_size_t size )
| {
| return malloc(size);
| }
|
| void *yyrealloc (void * ptr, yy_size_t size )
| {
|
| /* The cast to (char *) in the following accommodates both
| * implementations that use char* generic pointers, and those
| * that use void* generic pointers. It works with the latter
| * because both ANSI C and C++ allow castless assignment from
| * any pointer type to void*, and deal with argument conversions
| * as though doing an assignment.
| */
| return realloc(ptr, size);
| }
|
| void yyfree (void * ptr )
| {
| free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
| }
|
| #define YYTABLES_NAME "yytables"
|
| #line 10 "conftest.l"
|
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
| return ! yylex () + ! yywrap ();
| }
configure:12733: gcc -o conftest -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -lfl >&5
configure:12733: $? = 0
configure:12743: result: -lfl
configure:12749: checking whether yytext is a pointer
configure:12766: gcc -o conftest -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -lfl >&5
configure:12766: $? = 0
configure:12774: result: yes
configure:12792: checking for bison
configure:12808: found /data/data/com.termux/files/usr/bin/bison
configure:12819: result: bison -y
configure:12858: checking for dlopen in -ldl
configure:12883: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
configure:12883: $? = 0
configure:12892: result: yes
configure:12904: checking for the suffix of shared libraries
configure:12915: result: .so
configure:13128: checking for glib-2.0 >= 2.56.1
configure:13135: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.56.1"
configure:13138: $? = 0
configure:13152: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.56.1"
configure:13155: $? = 0
configure:13213: result: yes
configure:13220: checking for gobject-2.0
configure:13227: $PKG_CONFIG --exists --print-errors "gobject-2.0"
configure:13230: $? = 0
configure:13244: $PKG_CONFIG --exists --print-errors "gobject-2.0"
configure:13247: $? = 0
configure:13305: result: yes
configure:13311: checking for gmodule-2.0
configure:13318: $PKG_CONFIG --exists --print-errors "gmodule-2.0"
configure:13321: $? = 0
configure:13335: $PKG_CONFIG --exists --print-errors "gmodule-2.0"
configure:13338: $? = 0
configure:13396: result: yes
configure:13402: checking for gio-2.0
configure:13409: $PKG_CONFIG --exists --print-errors "gio-2.0"
configure:13412: $? = 0
configure:13426: $PKG_CONFIG --exists --print-errors "gio-2.0"
configure:13429: $? = 0
configure:13487: result: yes
configure:13493: checking for gio-unix-2.0
configure:13500: $PKG_CONFIG --exists --print-errors "gio-unix-2.0"
configure:13503: $? = 0
configure:13517: $PKG_CONFIG --exists --print-errors "gio-unix-2.0"
configure:13520: $? = 0
configure:13558: result: yes
configure:13585: checking for cairo cairo-gobject
configure:13592: $PKG_CONFIG --exists --print-errors "cairo cairo-gobject"
Package cairo was not found in the pkg-config search path.
Perhaps you should add the directory containing `cairo.pc'
to the PKG_CONFIG_PATH environment variable
No package 'cairo' found
Package cairo-gobject was not found in the pkg-config search path.
Perhaps you should add the directory containing `cairo-gobject.pc'
to the PKG_CONFIG_PATH environment variable
No package 'cairo-gobject' found
configure:13595: $? = 1
configure:13609: $PKG_CONFIG --exists --print-errors "cairo cairo-gobject"
Package cairo was not found in the pkg-config search path.
Perhaps you should add the directory containing `cairo.pc'
to the PKG_CONFIG_PATH environment variable
No package 'cairo' found
Package cairo-gobject was not found in the pkg-config search path.
Perhaps you should add the directory containing `cairo-gobject.pc'
to the PKG_CONFIG_PATH environment variable
No package 'cairo-gobject' found
configure:13612: $? = 1
configure:13626: result: no
No package 'cairo' found
No package 'cairo-gobject' found
configure:13692: checking for gobject-2.0 gio-2.0
configure:13699: $PKG_CONFIG --exists --print-errors "gobject-2.0 gio-2.0"
configure:13702: $? = 0
configure:13716: $PKG_CONFIG --exists --print-errors "gobject-2.0 gio-2.0"
configure:13719: $? = 0
configure:13777: result: yes
configure:13784: checking for libffi >= 3.0.0
configure:13791: $PKG_CONFIG --exists --print-errors "libffi >= 3.0.0 "
configure:13794: $? = 0
configure:13808: $PKG_CONFIG --exists --print-errors "libffi >= 3.0.0 "
configure:13811: $? = 0
configure:13849: result: yes
configure:13967: checking size of char
configure:13972: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
configure:13972: $? = 0
configure:13972: ./conftest
configure:13972: $? = 0
configure:13986: result: 1
configure:14000: checking size of short
configure:14005: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
configure:14005: $? = 0
configure:14005: ./conftest
configure:14005: $? = 0
configure:14019: result: 2
configure:14033: checking size of int
configure:14038: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
configure:14038: $? = 0
configure:14038: ./conftest
configure:14038: $? = 0
configure:14052: result: 4
configure:14066: checking size of long
configure:14071: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
configure:14071: $? = 0
configure:14071: ./conftest
configure:14071: $? = 0
configure:14085: result: 8
configure:14098: checking for glib-2.0 >= 2.24.0 gobject-2.0 gmodule-2.0 gio-2.0
configure:14105: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.24.0 gobject-2.0 gmodule-2.0 gio-2.0"
configure:14108: $? = 0
configure:14122: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.24.0 gobject-2.0 gmodule-2.0 gio-2.0"
configure:14125: $? = 0
configure:14183: result: yes
configure:14203: checking for gtk-doc
configure:14206: $PKG_CONFIG --exists --print-errors "$gtk_doc_requires"
Package gtk-doc was not found in the pkg-config search path.
Perhaps you should add the directory containing `gtk-doc.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gtk-doc' found
configure:14209: $? = 1
configure:14215: result: no
configure:14219: WARNING:
You will not be able to create source packages with 'make dist'
because gtk-doc >= 1.19 is not found.
configure:14229: checking for gtkdoc-check
configure:14259: result: no
configure:14266: checking for gtkdoc-check
configure:14299: result: no
configure:14308: checking for gtkdoc-rebase
configure:14341: result: no
configure:14352: checking for gtkdoc-mkpdf
configure:14385: result: no
configure:14410: checking whether to build gtk-doc documentation
configure:14412: result: no
configure:14425: checking for glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0
configure:14432: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0"
configure:14435: $? = 0
configure:14449: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0"
configure:14452: $? = 0
configure:14490: result: yes
configure:14572: checking for ANSI C header files
configure:14676: result: yes
configure:14687: checking fcntl.h usability
configure:14687: gcc -c -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:14687: $? = 0
configure:14687: result: yes
configure:14687: checking fcntl.h presence
configure:14687: gcc -E -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c
configure:14687: $? = 0
configure:14687: result: yes
configure:14687: checking for fcntl.h
configure:14687: result: yes
configure:14687: checking for stdlib.h
configure:14687: result: yes
configure:14687: checking for string.h
configure:14687: result: yes
configure:14699: checking for an ANSI C-conforming const
configure:14765: gcc -c -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c >&5
configure:14765: $? = 0
configure:14772: result: yes
configure:14782: checking for working strtod
configure:14823: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
configure:14823: $? = 0
configure:14823: ./conftest
configure:14823: $? = 0
configure:14833: result: yes
configure:14898: checking for memchr
configure:14898: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
conftest.c:60:6: warning: incompatible redeclaration of library function 'memchr' [-Wincompatible-library-redeclaration]
char memchr ();
^
conftest.c:60:6: note: 'memchr' is a builtin with type 'void *(const void *, int, unsigned long)'
1 warning generated.
configure:14898: $? = 0
configure:14898: result: yes
configure:14898: checking for strchr
configure:14898: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
conftest.c:61:6: warning: incompatible redeclaration of library function 'strchr' [-Wincompatible-library-redeclaration]
char strchr ();
^
conftest.c:61:6: note: 'strchr' is a builtin with type 'char *(const char *, int)'
1 warning generated.
configure:14898: $? = 0
configure:14898: result: yes
configure:14898: checking for strspn
configure:14898: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
conftest.c:62:6: warning: incompatible redeclaration of library function 'strspn' [-Wincompatible-library-redeclaration]
char strspn ();
^
conftest.c:62:6: note: 'strspn' is a builtin with type 'unsigned long (const char *, const char *)'
1 warning generated.
configure:14898: $? = 0
configure:14898: result: yes
configure:14898: checking for strstr
configure:14898: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
conftest.c:63:6: warning: incompatible redeclaration of library function 'strstr' [-Wincompatible-library-redeclaration]
char strstr ();
^
conftest.c:63:6: note: 'strstr' is a builtin with type 'char *(const char *, const char *)'
1 warning generated.
configure:14898: $? = 0
configure:14898: result: yes
configure:14898: checking for strtol
configure:14898: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
configure:14898: $? = 0
configure:14898: result: yes
configure:14898: checking for strtoull
configure:14898: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
configure:14898: $? = 0
configure:14898: result: yes
configure:14910: checking for backtrace
configure:14910: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
/data/data/com.termux/files/usr/bin/ld: /data/data/com.termux/files/usr/tmp/conftest-743efe.o: in function `main':
/data/data/com.termux/files/home/gobject-introspection-1.56.1/conftest.c:77: undefined reference to `backtrace'
clang-6.0: error: linker command failed with exit code 1 (use -v to see invocation)
configure:14910: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gobject-introspection"
| #define PACKAGE_TARNAME "gobject-introspection"
| #define PACKAGE_VERSION "1.56.1"
| #define PACKAGE_STRING "gobject-introspection 1.56.1"
| #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=gobject-introspection"
| #define PACKAGE_URL ""
| #define PACKAGE "gobject-introspection"
| #define VERSION "1.56.1"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_LIBDL 1
| #define SHLIB_SUFFIX "so"
| #define GOBJECT_INTROSPECTION_LIBDIR "/data/data/com.termux/files/usr/lib"
| #define GIR_SUFFIX "gir-1.0"
| #define GIR_DIR "/data/data/com.termux/files/usr/share/gir-1.0"
| #define SIZEOF_CHAR 1
| #define SIZEOF_SHORT 2
| #define SIZEOF_INT 4
| #define SIZEOF_LONG 8
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRSTR 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOULL 1
| /* end confdefs.h. */
| /* Define backtrace to an innocuous variant, in case <limits.h> declares backtrace.
| For example, HP-UX 11i <limits.h> declares gettimeofday. */
| #define backtrace innocuous_backtrace
|
| /* System header to define __stub macros and hopefully few prototypes,
| which can conflict with char backtrace (); below.
| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| <limits.h> exists even on freestanding compilers. */
|
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
|
| #undef backtrace
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char backtrace ();
| /* The GNU C library defines this for functions which it implements
| to always fail with ENOSYS. Some functions are actually named
| something starting with __ and the normal name is an alias. */
| #if defined __stub_backtrace || defined __stub___backtrace
| choke me
| #endif
|
| int
| main ()
| {
| return backtrace ();
| ;
| return 0;
| }
configure:14910: result: no
configure:14910: checking for backtrace_symbols
configure:14910: gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2 -I/data/data/com.termux/files/usr/include/python3.6m/ conftest.c -ldl >&5
/data/data/com.termux/files/usr/bin/ld: /data/data/com.termux/files/usr/tmp/conftest-f4034d.o: in function `main':
/data/data/com.termux/files/home/gobject-introspection-1.56.1/conftest.c:77: undefined reference to `backtrace_symbols'
clang-6.0: error: linker command failed with exit code 1 (use -v to see invocation)
configure:14910: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gobject-introspection"
| #define PACKAGE_TARNAME "gobject-introspection"
| #define PACKAGE_VERSION "1.56.1"
| #define PACKAGE_STRING "gobject-introspection 1.56.1"
| #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=gobject-introspection"
| #define PACKAGE_URL ""
| #define PACKAGE "gobject-introspection"
| #define VERSION "1.56.1"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_LIBDL 1
| #define SHLIB_SUFFIX "so"
| #define GOBJECT_INTROSPECTION_LIBDIR "/data/data/com.termux/files/usr/lib"
| #define GIR_SUFFIX "gir-1.0"
| #define GIR_DIR "/data/data/com.termux/files/usr/share/gir-1.0"
| #define SIZEOF_CHAR 1
| #define SIZEOF_SHORT 2
| #define SIZEOF_INT 4
| #define SIZEOF_LONG 8
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRSTR 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOULL 1
| /* end confdefs.h. */
| /* Define backtrace_symbols to an innocuous variant, in case <limits.h> declares backtrace_symbols.
| For example, HP-UX 11i <limits.h> declares gettimeofday. */
| #define backtrace_symbols innocuous_backtrace_symbols
|
| /* System header to define __stub macros and hopefully few prototypes,
| which can conflict with char backtrace_symbols (); below.
| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| <limits.h> exists even on freestanding compilers. */
|
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
|
| #undef backtrace_symbols
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char backtrace_symbols ();
| /* The GNU C library defines this for functions which it implements
| to always fail with ENOSYS. Some functions are actually named
| something starting with __ and the normal name is an alias. */
| #if defined __stub_backtrace_symbols || defined __stub___backtrace_symbols
| choke me
| #endif
|
| int
| main ()
| {
| return backtrace_symbols ();
| ;
| return 0;
| }
configure:14910: result: no
configure:14945: checking whether /data/data/com.termux/files/usr/bin/python version is >= 2.7
configure:14956: /data/data/com.termux/files/usr/bin/python -c import sys # split strings by '.' and convert to numeric. Append some zeros # because we need at least 4 digits for the hex conversion. # map returns an iterator in Python 3.0 and a list in 2.x minver = list(map(int, '2.7'.split('.'))) + [0, 0, 0] minverhex = 0 # xrange is not present in Python 3.0 and range returns an iterator for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[i] sys.exit(sys.hexversion < minverhex)
configure:14959: $? = 0
configure:14961: result: yes
configure:15054: checking for /data/data/com.termux/files/usr/bin/python version
configure:15061: result: 3.6
configure:15073: checking for /data/data/com.termux/files/usr/bin/python platform
configure:15080: result: linux
configure:15106: checking for /data/data/com.termux/files/usr/bin/python script directory
configure:15141: result: ${prefix}/lib/python3.6/site-packages
configure:15150: checking for /data/data/com.termux/files/usr/bin/python extension module directory
configure:15185: result: ${exec_prefix}/lib/python3.6/site-packages
configure:15206: checking for headers required to compile python extensions
configure:15216: gcc -E -I/data/data/com.termux/files/usr/include/python3.6m/ -I/data/data/com.termux/files/usr/include/python3.6m -I/data/data/com.termux/files/usr/include/python3.6m conftest.c
In file included from conftest.c:43:
/data/data/com.termux/files/usr/include/python3.6m/Python.h:39:10: fatal error: 'crypt.h' file not found
#include <crypt.h>
^~~~~~~~~
1 error generated.
configure:15216: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gobject-introspection"
| #define PACKAGE_TARNAME "gobject-introspection"
| #define PACKAGE_VERSION "1.56.1"
| #define PACKAGE_STRING "gobject-introspection 1.56.1"
| #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=gobject-introspection"
| #define PACKAGE_URL ""
| #define PACKAGE "gobject-introspection"
| #define VERSION "1.56.1"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define YYTEXT_POINTER 1
| #define HAVE_LIBDL 1
| #define SHLIB_SUFFIX "so"
| #define GOBJECT_INTROSPECTION_LIBDIR "/data/data/com.termux/files/usr/lib"
| #define GIR_SUFFIX "gir-1.0"
| #define GIR_DIR "/data/data/com.termux/files/usr/share/gir-1.0"
| #define SIZEOF_CHAR 1
| #define SIZEOF_SHORT 2
| #define SIZEOF_INT 4
| #define SIZEOF_LONG 8
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMCHR 1
| #define HAVE_STRCHR 1
| #define HAVE_STRSPN 1
| #define HAVE_STRSTR 1
| #define HAVE_STRTOL 1
| #define HAVE_STRTOULL 1
| /* end confdefs.h. */
| #include <Python.h>
configure:15221: result: not found
configure:15223: error: Python headers not found
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build='aarch64-unknown-linux-gnu'
ac_cv_c_compiler_gnu='yes'
ac_cv_c_const='yes'
ac_cv_env_CAIRO_CFLAGS_set=''
ac_cv_env_CAIRO_CFLAGS_value=''
ac_cv_env_CAIRO_LIBS_set=''
ac_cv_env_CAIRO_LIBS_value=''
ac_cv_env_CC_set=''
ac_cv_env_CC_value=''
ac_cv_env_CFLAGS_set=''
ac_cv_env_CFLAGS_value=''
ac_cv_env_CPPFLAGS_set='set'
ac_cv_env_CPPFLAGS_value=' -I/data/data/com.termux/files/usr/include/python3.6m/'
ac_cv_env_CPP_set=''
ac_cv_env_CPP_value=''
ac_cv_env_FFI_CFLAGS_set=''
ac_cv_env_FFI_CFLAGS_value=''
ac_cv_env_FFI_LIBS_set=''
ac_cv_env_FFI_LIBS_value=''
ac_cv_env_GIO_CFLAGS_set=''
ac_cv_env_GIO_CFLAGS_value=''
ac_cv_env_GIO_LIBS_set=''
ac_cv_env_GIO_LIBS_value=''
ac_cv_env_GIO_UNIX_CFLAGS_set=''
ac_cv_env_GIO_UNIX_CFLAGS_value=''
ac_cv_env_GIO_UNIX_LIBS_set=''
ac_cv_env_GIO_UNIX_LIBS_value=''
ac_cv_env_GIREPO_CFLAGS_set=''
ac_cv_env_GIREPO_CFLAGS_value=''
ac_cv_env_GIREPO_LIBS_set=''
ac_cv_env_GIREPO_LIBS_value=''
ac_cv_env_GLIB_CFLAGS_set=''
ac_cv_env_GLIB_CFLAGS_value=''
ac_cv_env_GLIB_LIBS_set=''
ac_cv_env_GLIB_LIBS_value=''
ac_cv_env_GMODULE_CFLAGS_set=''
ac_cv_env_GMODULE_CFLAGS_value=''
ac_cv_env_GMODULE_LIBS_set=''
ac_cv_env_GMODULE_LIBS_value=''
ac_cv_env_GOBJECT_CFLAGS_set=''
ac_cv_env_GOBJECT_CFLAGS_value=''
ac_cv_env_GOBJECT_LIBS_set=''
ac_cv_env_GOBJECT_LIBS_value=''
ac_cv_env_GTKDOC_DEPS_CFLAGS_set=''
ac_cv_env_GTKDOC_DEPS_CFLAGS_value=''
ac_cv_env_GTKDOC_DEPS_LIBS_set=''
ac_cv_env_GTKDOC_DEPS_LIBS_value=''
ac_cv_env_LDFLAGS_set=''
ac_cv_env_LDFLAGS_value=''
ac_cv_env_LIBS_set=''
ac_cv_env_LIBS_value=''
ac_cv_env_LT_SYS_LIBRARY_PATH_set=''
ac_cv_env_LT_SYS_LIBRARY_PATH_value=''
ac_cv_env_PKG_CONFIG_LIBDIR_set=''
ac_cv_env_PKG_CONFIG_LIBDIR_value=''
ac_cv_env_PKG_CONFIG_PATH_set=''
ac_cv_env_PKG_CONFIG_PATH_value=''
ac_cv_env_PKG_CONFIG_set=''
ac_cv_env_PKG_CONFIG_value=''
ac_cv_env_PYTHON_set=''
ac_cv_env_PYTHON_value=''
ac_cv_env_SCANNER_CFLAGS_set=''
ac_cv_env_SCANNER_CFLAGS_value=''
ac_cv_env_SCANNER_LIBS_set=''
ac_cv_env_SCANNER_LIBS_value=''
ac_cv_env_build_alias_set=''
ac_cv_env_build_alias_value=''
ac_cv_env_host_alias_set=''
ac_cv_env_host_alias_value=''
ac_cv_env_target_alias_set=''
ac_cv_env_target_alias_value=''
ac_cv_func_backtrace='no'
ac_cv_func_backtrace_symbols='no'
ac_cv_func_memchr='yes'
ac_cv_func_strchr='yes'
ac_cv_func_strspn='yes'
ac_cv_func_strstr='yes'
ac_cv_func_strtod='yes'
ac_cv_func_strtol='yes'
ac_cv_func_strtoull='yes'
ac_cv_header_dlfcn_h='yes'
ac_cv_header_fcntl_h='yes'
ac_cv_header_inttypes_h='yes'
ac_cv_header_memory_h='yes'
ac_cv_header_stdc='yes'
ac_cv_header_stdint_h='yes'
ac_cv_header_stdlib_h='yes'
ac_cv_header_string_h='yes'
ac_cv_header_strings_h='yes'
ac_cv_header_sys_stat_h='yes'
ac_cv_header_sys_types_h='yes'
ac_cv_header_unistd_h='yes'
ac_cv_host='aarch64-unknown-linux-gnu'
ac_cv_lib_dl_dlopen='yes'
ac_cv_lib_lex='-lfl'
ac_cv_objext='o'
ac_cv_path_EGREP='/data/data/com.termux/files/usr/bin/grep -E'
ac_cv_path_FGREP='/data/data/com.termux/files/usr/bin/grep -F'
ac_cv_path_GREP='/data/data/com.termux/files/usr/bin/grep'
ac_cv_path_SED='/data/data/com.termux/files/usr/bin/sed'
ac_cv_path_ac_pt_PKG_CONFIG='/data/data/com.termux/files/usr/bin/pkg-config'
ac_cv_path_install='/data/data/com.termux/files/usr/bin/applets/install -c'
ac_cv_path_lt_DD='/data/data/com.termux/files/usr/bin/applets/dd'
ac_cv_prog_AWK='awk'
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_LEX='flex'
ac_cv_prog_YACC='bison -y'
ac_cv_prog_ac_ct_AR='ar'
ac_cv_prog_ac_ct_CC='gcc'
ac_cv_prog_ac_ct_OBJDUMP='objdump'
ac_cv_prog_ac_ct_RANLIB='ranlib'
ac_cv_prog_ac_ct_STRIP='strip'
ac_cv_prog_cc_c89=''
ac_cv_prog_cc_g='yes'
ac_cv_prog_lex_root='lex.yy'
ac_cv_prog_lex_yytext_pointer='yes'
ac_cv_prog_make_make_set='yes'
ac_cv_sizeof_char='1'
ac_cv_sizeof_int='4'
ac_cv_sizeof_long='8'
ac_cv_sizeof_short='2'
am_cv_CC_dependencies_compiler_type='gcc3'
am_cv_make_support_nested_variables='yes'
am_cv_prog_cc_c_o='yes'
am_cv_prog_tar_ustar='none'
am_cv_python_platform='linux'
am_cv_python_pyexecdir='${exec_prefix}/lib/python3.6/site-packages'
am_cv_python_pythondir='${prefix}/lib/python3.6/site-packages'
am_cv_python_version='3.6'
lt_cv_ar_at_file='@'
lt_cv_archive_cmds_need_lc='no'
lt_cv_deplibs_check_method='pass_all'
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=''
lt_cv_ld_reload_flag='-r'
lt_cv_nm_interface='BSD nm'
lt_cv_objdir='.libs'
lt_cv_path_LD='/data/data/com.termux/files/usr/bin/ld'
lt_cv_path_NM='/data/data/com.termux/files/usr/bin/nm -B'
lt_cv_path_mainfest_tool='no'
lt_cv_prog_compiler_c_o='yes'
lt_cv_prog_compiler_pic='-fPIC -DPIC'
lt_cv_prog_compiler_pic_works='yes'
lt_cv_prog_compiler_rtti_exceptions='yes'
lt_cv_prog_compiler_static_works='no'
lt_cv_prog_gnu_ld='yes'
lt_cv_sharedlib_from_linklib_cmd='printf %s\n'
lt_cv_shlibpath_overrides_runpath='yes'
lt_cv_sys_global_symbol_pipe='sed -n -e '"'"'s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'"'"' | sed '"'"'/ __gnu_lto/d'"'"
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '"'"'s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'"'"' -e '"'"'s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"\1", (void *) \&\1},/p'"'"
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '"'"'s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'"'"' -e '"'"'s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib.*\)$/ {"\1", (void *) \&\1},/p'"'"' -e '"'"'s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *) \&\1},/p'"'"
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '"'"'s/^T .* \(.*\)$/extern int \1();/p'"'"' -e '"'"'s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'"'"
lt_cv_sys_global_symbol_to_import=''
lt_cv_sys_max_cmd_len='32768'
lt_cv_to_host_file_cmd='func_convert_file_noop'
lt_cv_to_tool_file_cmd='func_convert_file_noop'
lt_cv_truncate_bin='/data/data/com.termux/files/usr/bin/applets/dd bs=4096 count=1'
pkg_cv_FFI_CFLAGS='-I/data/data/com.termux/files/usr/include'
pkg_cv_FFI_LIBS='-L/data/data/com.termux/files/usr/lib -lffi'
pkg_cv_GIO_CFLAGS='-pthread -I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
pkg_cv_GIO_LIBS='-L/data/data/com.termux/files/usr/lib -lgio-2.0 -lgobject-2.0 -lglib-2.0'
pkg_cv_GIO_UNIX_CFLAGS='-pthread -I/data/data/com.termux/files/usr/include/gio-unix-2.0/ -I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
pkg_cv_GIO_UNIX_LIBS='-L/data/data/com.termux/files/usr/lib -lgio-2.0 -lgobject-2.0 -lglib-2.0'
pkg_cv_GIREPO_CFLAGS='-pthread -I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
pkg_cv_GIREPO_LIBS='-L/data/data/com.termux/files/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -pthread -lgio-2.0 -lgobject-2.0 -lglib-2.0'
pkg_cv_GLIB_CFLAGS='-I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
pkg_cv_GLIB_LIBS='-L/data/data/com.termux/files/usr/lib -lglib-2.0'
pkg_cv_GMODULE_CFLAGS='-pthread -I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
pkg_cv_GMODULE_LIBS='-L/data/data/com.termux/files/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -pthread -lglib-2.0'
pkg_cv_GOBJECT_CFLAGS='-I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
pkg_cv_GOBJECT_LIBS='-L/data/data/com.termux/files/usr/lib -lgobject-2.0 -lglib-2.0'
pkg_cv_GTKDOC_DEPS_CFLAGS='-I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
pkg_cv_GTKDOC_DEPS_LIBS='-L/data/data/com.termux/files/usr/lib -lgobject-2.0 -lglib-2.0'
pkg_cv_SCANNER_CFLAGS='-pthread -I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
pkg_cv_SCANNER_LIBS='-L/data/data/com.termux/files/usr/lib -lgio-2.0 -lgobject-2.0 -lglib-2.0'
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /data/data/com.termux/files/home/gobject-introspection-1.56.1/build-aux/missing aclocal-1.16'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='0'
AM_V='$(V)'
AR='ar'
AUTOCONF='${SHELL} /data/data/com.termux/files/home/gobject-introspection-1.56.1/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /data/data/com.termux/files/home/gobject-introspection-1.56.1/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /data/data/com.termux/files/home/gobject-introspection-1.56.1/build-aux/missing automake-1.16'
AWK='awk'
BUILD_DOCTOOL_FALSE=''
BUILD_DOCTOOL_TRUE=''
CAIRO_CFLAGS=''
CAIRO_GIR_PACKAGE='cairo-gobject'
CAIRO_LIBS=''
CAIRO_SHARED_LIBRARY='libcairo-gobject.so.2'
CC='gcc'
CCDEPMODE='depmode=gcc3'
CFLAGS='-fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -g -O2'
CPP='gcc -E'
CPPFLAGS=' -I/data/data/com.termux/files/usr/include/python3.6m/ -I/data/data/com.termux/files/usr/include/python3.6m -I/data/data/com.termux/files/usr/include/python3.6m'
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL='false'
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/data/data/com.termux/files/usr/bin/grep -E'
ENABLE_GTK_DOC_FALSE=''
ENABLE_GTK_DOC_TRUE='#'
EXEEXT=''
EXPANDED_BINDIR='/data/data/com.termux/files/usr/bin'
EXPANDED_DATADIR='/data/data/com.termux/files/usr/share'
EXPANDED_LIBDIR='/data/data/com.termux/files/usr/lib'
EXPANDED_LIBEXECDIR='/data/data/com.termux/files/usr/libexec'
EXPANDED_LOCALSTATEDIR='/data/data/com.termux/files/usr/var'
EXPANDED_SYSCONFDIR='/data/data/com.termux/files/usr/etc'
EXTRA_LINK_FLAGS=''
FFI_CFLAGS='-I/data/data/com.termux/files/usr/include'
FFI_LIBS='-L/data/data/com.termux/files/usr/lib -lffi'
FFI_PC_CFLAGS=''
FFI_PC_LIBS=''
FFI_PC_PACKAGES='libffi'
FGREP='/data/data/com.termux/files/usr/bin/grep -F'
GIO_CFLAGS='-pthread -I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
GIO_LIBS='-L/data/data/com.termux/files/usr/lib -lgio-2.0 -lgobject-2.0 -lglib-2.0'
GIO_UNIX_CFLAGS='-pthread -I/data/data/com.termux/files/usr/include/gio-unix-2.0/ -I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
GIO_UNIX_LIBS='-L/data/data/com.termux/files/usr/lib -lgio-2.0 -lgobject-2.0 -lglib-2.0'
GIREPO_CFLAGS='-pthread -I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include -I/data/data/com.termux/files/usr/include '
GIREPO_LIBS='-L/data/data/com.termux/files/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -pthread -lgio-2.0 -lgobject-2.0 -lglib-2.0 -L/data/data/com.termux/files/usr/lib -lffi'
GIR_DIR='/data/data/com.termux/files/usr/share/gir-1.0'
GIR_SUFFIX='gir-1.0'
GI_HIDDEN_VISIBILITY_CFLAGS=''
GI_VERSION='1.56.1'
GLIBSRC=''
GLIB_CFLAGS='-I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
GLIB_LIBS='-L/data/data/com.termux/files/usr/lib -lglib-2.0'
GMODULE_CFLAGS='-pthread -I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
GMODULE_LIBS='-L/data/data/com.termux/files/usr/lib -Wl,--export-dynamic -lgmodule-2.0 -pthread -lglib-2.0'
GOBJECT_CFLAGS='-I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
GOBJECT_INTROSPECTION_LIBDIR='/data/data/com.termux/files/usr/lib'
GOBJECT_LIBS='-L/data/data/com.termux/files/usr/lib -lgobject-2.0 -lglib-2.0'
GREP='/data/data/com.termux/files/usr/bin/grep'
GTKDOC_CHECK=''
GTKDOC_CHECK_PATH=''
GTKDOC_DEPS_CFLAGS='-I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
GTKDOC_DEPS_LIBS='-L/data/data/com.termux/files/usr/lib -lgobject-2.0 -lglib-2.0'
GTKDOC_MKPDF=''
GTKDOC_REBASE='true'
GTK_DOC_BUILD_HTML_FALSE='#'
GTK_DOC_BUILD_HTML_TRUE=''
GTK_DOC_BUILD_PDF_FALSE=''
GTK_DOC_BUILD_PDF_TRUE='#'
GTK_DOC_USE_LIBTOOL_FALSE='#'
GTK_DOC_USE_LIBTOOL_TRUE=''
GTK_DOC_USE_REBASE_FALSE='#'
GTK_DOC_USE_REBASE_TRUE=''
HAVE_CAIRO_FALSE=''
HAVE_CAIRO_TRUE='#'
HAVE_GIO_UNIX_FALSE='#'
HAVE_GIO_UNIX_TRUE=''
HAVE_GTK_DOC_FALSE=''
HAVE_GTK_DOC_TRUE='#'
HTML_DIR='${datadir}/gtk-doc/html'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD='/data/data/com.termux/files/usr/bin/ld'
LDFLAGS=''
LEX='flex'
LEXLIB='-lfl'
LEX_OUTPUT_ROOT='lex.yy'
LIBOBJS=''
LIBS='-ldl '
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LIPO=''
LN_S='ln -s'
LTLIBOBJS=''
LT_SYS_LIBRARY_PATH=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /data/data/com.termux/files/home/gobject-introspection-1.56.1/build-aux/missing makeinfo'
MANIFEST_TOOL=':'
MKDIR_P='build-aux/install-sh -c -d'
MSVC_BASE_NO_TOOLSET_SET_FALSE=''
MSVC_BASE_NO_TOOLSET_SET_TRUE=''
MSVC_NO_TOOLSET_SET_FALSE=''
MSVC_NO_TOOLSET_SET_TRUE=''
NM='/data/data/com.termux/files/usr/bin/nm -B'
NMEDIT=''
OBJDUMP='objdump'
OBJEXT='o'
OS_WIN32_FALSE=''
OS_WIN32_TRUE='#'
OTOOL64=''
OTOOL=''
PACKAGE='gobject-introspection'
PACKAGE_BUGREPORT='http://bugzilla.gnome.org/enter_bug.cgi?product=gobject-introspection'
PACKAGE_NAME='gobject-introspection'
PACKAGE_STRING='gobject-introspection 1.56.1'
PACKAGE_TARNAME='gobject-introspection'
PACKAGE_URL=''
PACKAGE_VERSION='1.56.1'
PATH_SEPARATOR=':'
PKG_CONFIG='/data/data/com.termux/files/usr/bin/pkg-config'
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH=''
POW_LIB=''
PYTHON='/data/data/com.termux/files/usr/bin/python'
PYTHON_EXEC_PREFIX='${exec_prefix}'
PYTHON_INCLUDES='-I/data/data/com.termux/files/usr/include/python3.6m -I/data/data/com.termux/files/usr/include/python3.6m'
PYTHON_LIBS=''
PYTHON_PLATFORM='linux'
PYTHON_PREFIX='${prefix}'
PYTHON_VERSION='3.6'
RANLIB='ranlib'
SCANNER_CFLAGS='-pthread -I/data/data/com.termux/files/usr/include/glib-2.0 -I/data/data/com.termux/files/usr/lib/glib-2.0/include -I/data/data/com.termux/files/usr/include'
SCANNER_LIBS='-L/data/data/com.termux/files/usr/lib -lgio-2.0 -lgobject-2.0 -lglib-2.0'
SED='/data/data/com.termux/files/usr/bin/sed'
SET_MAKE=''
SHELL='sh'
STRIP='strip'
VERSION='1.56.1'
WITH_GLIBSRC_FALSE=''
WITH_GLIBSRC_TRUE=''
YACC='bison -y'
ac_ct_AR='ar'
ac_ct_CC='gcc'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='false'
am__untar='false'
bindir='${exec_prefix}/bin'
build='aarch64-unknown-linux-gnu'
build_alias=''
build_cpu='aarch64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host='aarch64-unknown-linux-gnu'
host_alias=''
host_cpu='aarch64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /data/data/com.termux/files/home/gobject-introspection-1.56.1/build-aux/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
pkgpyexecdir='${pyexecdir}/gobject-introspection'
pkgpythondir='${pythondir}/gobject-introspection'
prefix='/data/data/com.termux/files/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
pyexecdir='${exec_prefix}/lib/python3.6/site-packages'
pythondir='${prefix}/lib/python3.6/site-packages'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "gobject-introspection"
#define PACKAGE_TARNAME "gobject-introspection"
#define PACKAGE_VERSION "1.56.1"
#define PACKAGE_STRING "gobject-introspection 1.56.1"
#define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=gobject-introspection"
#define PACKAGE_URL ""
#define PACKAGE "gobject-introspection"
#define VERSION "1.56.1"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_DLFCN_H 1
#define LT_OBJDIR ".libs/"
#define YYTEXT_POINTER 1
#define HAVE_LIBDL 1
#define SHLIB_SUFFIX "so"
#define GOBJECT_INTROSPECTION_LIBDIR "/data/data/com.termux/files/usr/lib"
#define GIR_SUFFIX "gir-1.0"
#define GIR_DIR "/data/data/com.termux/files/usr/share/gir-1.0"
#define SIZEOF_CHAR 1
#define SIZEOF_SHORT 2
#define SIZEOF_INT 4
#define SIZEOF_LONG 8
#define STDC_HEADERS 1
#define HAVE_FCNTL_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMCHR 1
#define HAVE_STRCHR 1
#define HAVE_STRSPN 1
#define HAVE_STRSTR 1
#define HAVE_STRTOL 1
#define HAVE_STRTOULL 1
configure: exit 1
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment