Last active
October 26, 2020 21:21
-
-
Save NguyenKhong/e189be4e8d7d1b774fd8aff88104fa06 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
########################################### | |
### ### | |
### Utorrent Server v3.0 Config File ### | |
### ### | |
### By Khizer Naeem ### | |
### khizernaeem@gmail.com ### | |
### Date: 29/12/2011 ### | |
### ### | |
########################################### | |
########################################### | |
# Note: - Don't use quotes or double quotes when giving a value | |
# - Don't add trailing / when specifying any directory | |
##################### | |
## Regular Settings # | |
##################### | |
#bind_port (integer): | |
# Default value: 6881. Port used for BitTorrent protocol. This can be any value in the range 1025-65000. | |
bind_port: 6881 | |
#max_ul_rate (integer): | |
# Default value: -1. Maximum total upload rate in kilobytes per second. -1 means unlimited. We recommend setting it to -1. | |
max_ul_rate: 0 | |
#max_ul_rate_seed (integer): | |
# Default value: -1. Maximum per-torrent upload rate when seeding, in kilobytes per second. -1 means unlimited. We recommend setting it to -1. | |
max_ul_rate_seed: 0 | |
#conns_per_torrent (integer): | |
# Default value: 50. Maximum number of connections for a given torrent. | |
conns_per_torrent: 999 | |
#max_total_connections (integer): | |
# Default value: 200. Maximum number of connection opened at the same time. | |
max_total_connections: 999 | |
#auto_bandwidth_management (boolean): | |
# Default value: true. If true, upload bandwidth is automatically throttled in order to not impact other applications using TCP/IP. | |
auto_bandwidth_management: true | |
#max_dl_rate (integer): | |
# Default value: -1. Maximum total download rate in kilobytes per second. -1 means unlimited. We recommend setting it to -1. | |
max_dl_rate: 0 | |
#seed_ratio (integer): | |
# Default value: 0. Seed ratio in percent (%) (e.g. 100 means 100%). If not 0, seeding will stop after reaching this upload/download ratio. | |
seed_ratio: 0 | |
#seed_time (integer): | |
# Default value: 0. Time after which seeding will stop, in seconds. 0 means seeding won't stop. | |
seed_time: 0 | |
##################### | |
# Internal Settings # | |
##################### | |
#bind_ip (string): | |
# IP address to use for socket connections. If not provided, a default IP address will be used. We do not recommend changing this value. | |
#ut_webui_port (integer): | |
# Default value: 8080. Port number where the utserver process accepts HTTP RPC API calls to support the µTorrent-compatible HTTP interface. | |
ut_webui_port: 5454 | |
#token_auth_enable (boolean) | |
# Default value: true. If true, the µTorrent HTTP interface defends against cross-site request forgeries. | |
# If false, the µTorrent HTTP interface will not be protected in this manner. | |
token_auth_enable: false | |
#dir_root (string): | |
# Default value: "". If not empty, dir_active, dir_completed, and dir_torrent_files are relative to this directory. | |
dir_root: /content/uTorrent/data | |
#dir_active (string): | |
# Default value: "./". Directory in which currently downloaded data is saved. | |
# Can be an absolute path or relative to dir_root or the current working directory if dir_root is not defined or an empty string. | |
#dir_active: /content/uTorrent/downloads | |
#dir_completed (string): | |
# Default value: "". Directory where completed downloads are stored. | |
dir_completed: /content/uTorrent/downloads | |
#dir_download (string): | |
# Default value: "". Optional directory where completed downloads can be stored, instead of in dir_completed. | |
# If no value is specified for this setting, the value of dir_completed is used. | |
# This option can be specified multiple times in the file - once for each directory to be designated as such. | |
# This option can be used when adding torrents via the µTorrent HTTP interface, not via the SDK interface. | |
# Use the action list-dirs to obtain a list of download directories from the µTorrent HTTP interface. | |
# Use the option download_dir to specify which of these directories to use when adding a torrent by URL or file through the µTorrent HTTP interface; | |
# The index of each entry will be in order in which each entry appears in utserver.conf | |
dir_download: /content/uTorrent/downloads | |
#dir_torrent_files (string): | |
# Default value: "". Directory where torrent files are stored. If the empty string, the value of dir_active is used. | |
dir_torrent_files: /content/uTorrent/torrents | |
#dir_temp_files (string): | |
# Default value: "". Directory where temporary files are stored. If the empty string, the value of dir_active is used. | |
# Using a separate directory just for temporary files allows for deleting the files in this directory on boot and/or periodically. | |
# The utserver process creates temporary files with a .utt extension, | |
# if a value for this setting is specified, the utserver process will delete all files with that extension in that directory at process startup. | |
# The value should specify a directory, not a symbolic link to a directory. | |
dir_temp_files: | |
#dir_autoload (string): | |
# Default value: "". Directory where torrent files will be recognized and auto-loaded. If the empty string, auto-load is disabled. | |
dir_autoload: /content/uTorrent/torrents | |
#dir_autoload_delete (boolean): | |
# Default value: false. If true, torrent files in the autoload directory will be deleted after being loaded, | |
# else they will be renamed with an extension of .loaded. The dir_autoload setting must be specified for this setting to have an effect. | |
dir_autoload_delete: false | |
#upnp (boolean): | |
# Default value: true. If true, UPNP functionality for mapping ports is used by utserver. We recommend setting this value to true. | |
upnp: true | |
#natpmp (boolean): | |
# Default value: true. If true, NAT-PMP functionality for mapping ports is used by utserver. We recommend setting this value to true. | |
natpmp: true | |
#lsd (boolean): | |
# Default value: true. If true, Local Service Discovery is enabled. We recommend setting this value to true. | |
lsd: true | |
#dht (boolean): | |
# Default value: true. If true, Distributed Hash Table extension is enabled. We recommend setting this value to true. | |
dht: true | |
#pex (boolean): | |
# Default value: true. If true, Peer Exchange extension is enabled. We recommend setting this value to true. | |
pex: true | |
#rate_limit_local_peers (boolean): | |
# Default value: false. If true, rate limiting also applies to communications with peers in the local subnet. We recommend setting this value to false. | |
rate_limit_local_peers: false | |
#disk_cache_max_size (integer): | |
# Default value: 0. Maximum amount of memory used by each of the read, write, and piece caches. Value is in megabytes. | |
# If 0, accepts the SDK's default choices on selecting sizes of disk caches. Maximum value is 512. | |
disk_cache_max_size: 0 | |
#preferred_interface (string): | |
# Default value: "". If defined, name of network interface to be preferred, | |
# when attempting to search among network interfaces for an external IP and hardware address. | |
# If empty string, preferred interface is ignored. | |
preferred_interface: | |
#admin_name (string): | |
# Default value: "admin". If defined, name that must be supplied (along with the password) when authenticating to the server via the HTTP interface. | |
# This allows the administrator to define an initial non-default value for this name. | |
# This value will not be applied from utserver.conf if settings.dat already exists. | |
admin_name: admin | |
#admin_password (string): | |
# Default value: "". If defined, password that must be supplied (along with the name) when authenticating to the server via the HTTP interface. | |
# This allows the administrator to define an initial non-default value for this password. | |
# This value will not be applied from utserver.conf if settings.dat already exists. | |
admin_password: admin | |
#logmask (integer): | |
# Default value: 0. A mask whose bits when set allow certain categories of log messages to be generated. | |
# The bits (0 - 31) in the value of this setting correspond to a set of internal events and subsystems. | |
# | |
# 3 - send have | |
# 6 - hole punch | |
# 7 - got bad piece request | |
# 8 - trace | |
# 9 - piece picker | |
# 10 - got bad cancel | |
# 11 - got bad unchoke | |
# 12 - got bad piece | |
# 13 - rss | |
# 14 - rss error | |
# 15 - got have | |
# 16 - got bad have | |
# 17 - error | |
# 18 - aggregated | |
# 19 - disconnect | |
# 20 - out connect | |
# 21 - in connect | |
# 22 - UPnP | |
# 23 - UPnP error | |
# 24 - NATPMP | |
# 25 - NATPMP error | |
# 26 - metadata finish | |
# 27 - web UI | |
# 28 - got bad reject | |
# 29 - pex | |
# 30 - peer messages | |
# 31 - blocked connect | |
logmask: 0 | |
#dir_request (string): | |
# Default value: "". Directory where maintenance request files will be recognized, loaded, and deleted. | |
# If the empty string, maintenance request handling is disabled. | |
# | |
# Your software running on your device can create the following files in this directory in order to request the following maintenance procedures. | |
# | |
# If the file c.utmr is created in or moved into this directory, | |
# the credentials necessary to access the µTorrent HTTP interface will be reset to username admin and a blank password. | |
# | |
# If the file wipl.utmr is created in or moved into this directory, | |
# the IP restriction list that limits the IPs that can use the µTorrent HTTP interface is cleared, | |
# so that there will be no restrictions on IP address. | |
# | |
# If the file rcf.utmr is created in or moved into this directory, | |
# the server will reload the configuration file. If you always use this method to request a configuration file reload, | |
# you can safely change the value of this setting while the server is running. | |
#ut_webui_dir (string): | |
# Default value: "". Directory where the web UI file archive webui.zip is stored, | |
# or which contains a webui subdirectory within which the unarchived web UI files are stored. | |
# It can be an absolute path or set relative to the current directory. | |
ut_webui_dir: | |
#finish_cmd (string), state_cmd (string): | |
# Default value: "". If defined, | |
# finish_cmd is a command that will be executed upon completion of each torrent. | |
# state_cmd is a command that will be executed when a torrent changes state. | |
# The command is run asynchronously as the same user that runs the server process. | |
# | |
# The server permits substitutions in the command text as follows: | |
# | |
# %F Name of downloaded data file (for single-file torrents) | |
# %D directory where torrent data files are saved | |
# %N torrent title | |
# %S torrent state | |
# %P previous state of torrent | |
# %L label associated with torrent | |
# %T tracker | |
# %M status message | |
# %I hex-encoded info-hash | |
# | |
# State (%S) and previous state (%P) are integers that have the following values: | |
# | |
# 1 (error) | |
# 2 (checked) | |
# 3 (paused) | |
# 4 (super seeding) | |
# 5 (seeding) | |
# 6 (downloading) | |
# 7 (super seeding (forced)) | |
# 8 (seeding (forced)) | |
# 9 (downloading (forced)) | |
# 10 (queued seed) | |
# 11 (finished) | |
# 12 (queued) | |
# 13 (stopped) | |
finish_cmd: | |
state_cmd: |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment