Skip to content

Instantly share code, notes, and snippets.

@NiharG15
Created January 16, 2013 08:19
Show Gist options
  • Save NiharG15/4545478 to your computer and use it in GitHub Desktop.
Save NiharG15/4545478 to your computer and use it in GitHub Desktop.
DMESG for WiFi not working
<4>[ 317.052856] ## wifi_probe
<4>[ 317.053039] wifi_set_power = 1
<6>[ 317.053253] pico_wifi_power: 1
<7>[ 317.054016] htc_wifi_bt_sleep_clk_ctl ON=1, ID=0
<7>[ 317.054046] htc_wifi_bt_sleep_clk_ctl ON=1, ID=0 DONE
<4>[ 317.189422] wifi_set_carddetect = 1
<6>[ 317.189758] pico_wifi_set_carddetect: 1
<6>[ 317.189910] mmc1: Slot status change detected (0 -> 1)
<4>[ 317.194396]
<4>[ 317.194427] Dongle Host Driver, version 5.90.195.23
<4>[ 317.194427] Compiled in drivers/net/wireless/bcmdhd on Jan 16 2013 at 09:39:18
<6>[ 317.237030] mmc1: new high speed SDIO card at address 0001
<4>[ 317.239379] F1 signature read @0x18000000=0x16044330
<4>[ 317.245269] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 317.251464] wl_create_event_handler thr:512 started
<4>[ 317.254272] p2p0: P2P Interface Registered
<4>[ 317.259765] dhd_attach thr:513 started
<4>[ 317.261169] dhd_attach thr:514 started
<4>[ 317.266113] dhd_attach thr:515 started
<4>[ 317.266510] wifi_get_mac_addr
<4>[ 317.266723] pico_wifi_get_mac_addr = a8 26 d9 17 23 d6
<4>[ 317.268707] Broadcom Dongle Host Driver: register interface [eth0] MAC: 00:90:4c:11:22:33
<4>[ 317.268981] wifi_set_power = 0
<6>[ 317.269287] pico_wifi_power: 0
<7>[ 317.269683] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0
<7>[ 317.269836] KEEP SLEEP CLK ALIVE
<7>[ 317.270141] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0 DONE
<4>[ 317.423309] =========== WLAN placed in RESET ========
<7>[ 319.111633] [GSNR][BMA250 NO_COMP] GSensor [5,-8,-714]
<7>[ 322.611633] [GSNR][BMA250 NO_COMP] GSensor [11,-16,-722]
<6>[ 323.629364] [LED]pm8029_led_brightness_set: data2 0x40000
<7>[ 326.111663] [GSNR][BMA250 NO_COMP] GSensor [11,-8,-720]
<7>[ 329.611663] [GSNR][BMA250 NO_COMP] GSensor [16,-14,-717]
<7>[ 333.111572] [GSNR][BMA250 NO_COMP] GSensor [8,-5,-720]
<6>[ 336.263366] call alarm, type 3, func alarm_triggered+0x0/0xd8, 329959000000 (s 329959000000)
<7>[ 336.611663] [GSNR][BMA250 NO_COMP] GSensor [11,-2,-708]
<6>[ 338.287353] call alarm, type 3, func alarm_triggered+0x0/0xd8, 331983000000 (s 331983000000)
<6>[ 339.900360] [LED]pm8029_led_brightness_set: data2 0x4c800
<7>[ 340.111572] [GSNR][BMA250 NO_COMP] GSensor [8,-8,-714]
<6>[ 340.822082] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 0 msec
<6>[ 340.822418] [VIB]set_pmic_vibrator_off: +
<7>[ 343.611602] [GSNR][BMA250 NO_COMP] GSensor [11,-11,-717]
<6>[ 343.671630] [VIB]vibrator_enable, Binder_4(parent:zygote): vibrates 0 msec
<6>[ 343.671844] [VIB]set_pmic_vibrator_off: +
<7>[ 347.111602] [GSNR][BMA250 NO_COMP] GSensor [14,-11,-714]
<6>[ 349.449707] [LED]pm8029_led_brightness_set: data2 0x40000
<7>[ 350.611633] [GSNR][BMA250 NO_COMP] GSensor [11,-11,-720]
<7>[ 354.111602] [GSNR][BMA250 NO_COMP] GSensor [11,-5,-725]
<7>[ 357.611572] [GSNR][BMA250 NO_COMP] GSensor [11,-11,-720]
<7>[ 361.111633] [GSNR][BMA250 NO_COMP] GSensor [16,-11,-720]
<7>[ 364.612091] [GSNR][BMA250 NO_COMP] GSensor [11,-8,-720]
<7>[ 368.111633] [GSNR][BMA250 NO_COMP] GSensor [14,-5,-717]
<6>[ 369.392333] [BATT] M2A_RPC: level_update: 86 at 363102722831 (2013-01-16 08:13:33.129076944 UTC)
<6>[ 369.396331] [BATT] power_supply_changed: battery at 363106079764 (2013-01-16 08:13:33.133105264 UTC)
<6>[ 369.407684] [BATT] ID=1, level=86, vol=4122, temp=340, batt_current=338, chg_src=1, chg_en=1, full_bat=1200000, over_vchg=0, smem_vbus=1 at 363118134207 (2013-01-16 08:13:33.144366250 UTC)
<6>[ 369.410430] [BATT] ID=1, level=86, vol=4122, temp=340, batt_current=338, chg_src=1, chg_en=1, full_bat=1200000, over_vchg=0, smem_vbus=1 at 363127869314 (2013-01-16 08:13:33.147143349 UTC)
<7>[ 371.611633] [GSNR][BMA250 NO_COMP] GSensor [14,-5,-717]
<7>[ 375.111633] [GSNR][BMA250 NO_COMP] GSensor [11,-8,-722]
<7>[ 378.611633] [GSNR][BMA250 NO_COMP] GSensor [8,-2,-720]
<7>[ 382.111602] [GSNR][BMA250 NO_COMP] GSensor [11,-5,-711]
<7>[ 385.612182] [GSNR][BMA250 NO_COMP] GSensor [5,-8,-717]
<6>[ 387.508789] [VIB]vibrator_enable, InputReader(parent:zygote): vibrates 0 msec
<6>[ 387.509124] [VIB]set_pmic_vibrator_off: +
<6>[ 387.511779] [LED]pm8029_led_brightness_set: data2 0x4c800
<6>[ 387.516998] [VIB]vibrator_enable, Thread-172(parent:zygote): vibrates 10 msec
<6>[ 387.517211] [VIB]set_pmic_vibrator_on: +
<6>[ 387.527618] [VIB]vibrator_timer_func
<6>[ 387.527801] [VIB]set_pmic_vibrator_off: +
<6>[ 387.547912] [VIB]vibrator_enable, Thread-172(parent:zygote): vibrates 30 msec
<6>[ 387.548248] [VIB]set_pmic_vibrator_on: +
<6>[ 387.578552] [VIB]vibrator_timer_func
<6>[ 387.578857] [VIB]set_pmic_vibrator_off: +
<7>[ 389.111755] [GSNR][BMA250 NO_COMP] GSensor [14,-5,-711]
<6>[ 390.504455] [VIB]vibrator_enable, InputReader(parent:zygote): vibrates 0 msec
<6>[ 390.505889] [VIB]set_pmic_vibrator_off: +
<6>[ 390.532562] [VIB]vibrator_enable, Thread-174(parent:zygote): vibrates 10 msec
<6>[ 390.533996] [VIB]set_pmic_vibrator_on: +
<6>[ 390.544860] [VIB]vibrator_timer_func
<6>[ 390.545166] [VIB]set_pmic_vibrator_off: +
<6>[ 390.565399] [VIB]vibrator_enable, Thread-174(parent:zygote): vibrates 30 msec
<6>[ 390.565734] [VIB]set_pmic_vibrator_on: +
<6>[ 390.596038] [VIB]vibrator_timer_func
<6>[ 390.596252] [VIB]set_pmic_vibrator_off: +
<7>[ 392.611602] [GSNR][BMA250 NO_COMP] GSensor [14,-14,-720]
<6>[ 394.723236] [VIB]vibrator_enable, InputReader(parent:zygote): vibrates 0 msec
<6>[ 394.723571] [VIB]set_pmic_vibrator_off: +
<6>[ 394.731414] [VIB]vibrator_enable, Thread-175(parent:zygote): vibrates 10 msec
<6>[ 394.731750] [VIB]set_pmic_vibrator_on: +
<6>[ 394.741973] [VIB]vibrator_timer_func
<6>[ 394.742187] [VIB]set_pmic_vibrator_off: +
<6>[ 394.762420] [VIB]vibrator_enable, Thread-175(parent:zygote): vibrates 30 msec
<6>[ 394.762603] [VIB]set_pmic_vibrator_on: +
<6>[ 394.793029] [VIB]vibrator_timer_func
<6>[ 394.793212] [VIB]set_pmic_vibrator_off: +
<7>[ 396.111541] [GSNR][BMA250 NO_COMP] GSensor [8,-11,-711]
<6>[ 396.263336] call alarm, type 3, func alarm_triggered+0x0/0xd8, 389959000000 (s 389959000000)
<6>[ 398.299346] call alarm, type 3, func alarm_triggered+0x0/0xd8, 391995000000 (s 391995000000)
<7>[ 399.611663] [GSNR][BMA250 NO_COMP] GSensor [2,-2,-714]
<6>[ 400.728851] [LED]pm8029_led_brightness_set: data2 0x40000
<4>[ 402.942047] dhd_detach thr:515 terminated OK
<4>[ 402.981506] dhd_detach thr:513 terminated OK
<4>[ 402.981781] dhd_detach thr:514 terminated OK
<4>[ 403.024353] wl_destroy_event_handler thr:512 terminated OK
<4>[ 403.062133] dhdsdio_htclk: HT Avail request error: -35
<4>[ 403.082885] ## wifi_remove
<4>[ 403.083190] wifi_set_power = 0
<6>[ 403.083374] pico_wifi_power: 0
<7>[ 403.083740] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0
<7>[ 403.084045] KEEP SLEEP CLK ALIVE
<7>[ 403.084228] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0 DONE
<7>[ 403.111480] [GSNR][BMA250 NO_COMP] GSensor [11,-8,-714]
<4>[ 403.215759] wifi_set_carddetect = 0
<6>[ 403.215942] pico_wifi_set_carddetect: 0
<6>[ 403.216094] mmc1: Slot status change detected (1 -> 0)
<6>[ 403.217193] mmc1: card 0001 removed
<7>[ 406.611663] [GSNR][BMA250 NO_COMP] GSensor [11,-8,-720]
<7>[ 410.111572] [GSNR][BMA250 NO_COMP] GSensor [16,-11,-722]
<7>[ 413.611694] [GSNR][BMA250 NO_COMP] GSensor [14,-11,-717]
<7>[ 417.111633] [GSNR][BMA250 NO_COMP] GSensor [11,-8,-711]
<7>[ 420.611663] [GSNR][BMA250 NO_COMP] GSensor [19,-11,-720]
<7>[ 424.111633] [GSNR][BMA250 NO_COMP] GSensor [16,-11,-722]
<7>[ 427.611633] [GSNR][BMA250 NO_COMP] GSensor [14,-8,-711]
<7>[ 431.111663] [GSNR][BMA250 NO_COMP] GSensor [8,-16,-717]
<7>[ 434.611633] [GSNR][BMA250 NO_COMP] GSensor [8,-5,-714]
<7>[ 438.111694] [GSNR][BMA250 NO_COMP] GSensor [16,-5,-720]
<6>[ 441.316009] [LED]pm8029_led_brightness_set: data2 0x4c800
<4>[ 441.505615] ## wifi_probe
<4>[ 441.505615] wifi_set_power = 1
<6>[ 441.505645] pico_wifi_power: 1
<7>[ 441.505859] htc_wifi_bt_sleep_clk_ctl ON=1, ID=0
<7>[ 441.505889] htc_wifi_bt_sleep_clk_ctl ON=1, ID=0 DONE
<7>[ 441.611572] [GSNR][BMA250 NO_COMP] GSensor [5,-2,-722]
<4>[ 441.638061] wifi_set_carddetect = 1
<6>[ 441.638397] pico_wifi_set_carddetect: 1
<6>[ 441.638549] mmc1: Slot status change detected (0 -> 1)
<4>[ 441.643859]
<4>[ 441.643859] Dongle Host Driver, version 5.90.195.23
<4>[ 441.643890] Compiled in drivers/net/wireless/bcmdhd on Jan 16 2013 at 09:39:18
<6>[ 441.685974] mmc1: new high speed SDIO card at address 0001
<4>[ 441.688995] F1 signature read @0x18000000=0x16044330
<4>[ 441.695434] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 441.701171] wl_create_event_handler thr:543 started
<4>[ 441.704010] p2p0: P2P Interface Registered
<4>[ 441.710754] dhd_attach thr:544 started
<4>[ 441.713958] dhd_attach thr:545 started
<4>[ 441.716857] dhd_attach thr:546 started
<4>[ 441.717254] wifi_get_mac_addr
<4>[ 441.717468] pico_wifi_get_mac_addr = a8 26 d9 17 23 d6
<4>[ 441.719482] Broadcom Dongle Host Driver: register interface [eth0] MAC: 00:90:4c:11:22:33
<4>[ 441.720336] wifi_set_power = 0
<6>[ 441.720642] pico_wifi_power: 0
<7>[ 441.721008] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0
<7>[ 441.721313] KEEP SLEEP CLK ALIVE
<7>[ 441.721618] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0 DONE
<4>[ 441.880889] =========== WLAN placed in RESET ========
<7>[ 445.111663] [GSNR][BMA250 NO_COMP] GSensor [11,-11,-717]
<6>[ 447.414794] [LED]pm8029_led_brightness_set: data2 0x40000
<7>[ 448.611785] [GSNR][BMA250 NO_COMP] GSensor [11,-11,-714]
<7>[ 452.111602] [GSNR][BMA250 NO_COMP] GSensor [8,-11,-717]
<7>[ 455.612030] [GSNR][BMA250 NO_COMP] GSensor [14,-5,-722]
<6>[ 456.263366] call alarm, type 3, func alarm_triggered+0x0/0xd8, 449959000000 (s 449959000000)
<6>[ 458.309509] call alarm, type 3, func alarm_triggered+0x0/0xd8, 452005000000 (s 452005000000)
<7>[ 459.111572] [GSNR][BMA250 NO_COMP] GSensor [5,-14,-720]
<7>[ 462.611633] [GSNR][BMA250 NO_COMP] GSensor [8,-5,-717]
<7>[ 466.111633] [GSNR][BMA250 NO_COMP] GSensor [5,-8,-711]
<7>[ 469.611633] [GSNR][BMA250 NO_COMP] GSensor [8,-11,-717]
<7>[ 473.111663] [GSNR][BMA250 NO_COMP] GSensor [16,-14,-714]
<7>[ 476.611694] [GSNR][BMA250 NO_COMP] GSensor [11,-14,-711]
<7>[ 480.111663] [GSNR][BMA250 NO_COMP] GSensor [16,-11,-714]
<7>[ 483.611572] [GSNR][BMA250 NO_COMP] GSensor [11,-11,-708]
<7>[ 487.112121] [GSNR][BMA250 NO_COMP] GSensor [11,-16,-720]
<6>[ 489.390136] [BATT] M2A_RPC: level_update: 87 at 483099426931 (2013-01-16 08:15:33.126910195 UTC)
<6>[ 489.390655] [BATT] power_supply_changed: battery at 483099945730 (2013-01-16 08:15:33.127459511 UTC)
<6>[ 489.393402] [BATT] ID=1, level=87, vol=4130, temp=343, batt_current=334, chg_src=1, chg_en=1, full_bat=1200000, over_vchg=0, smem_vbus=1 at 483102722829 (2013-01-16 08:15:33.130175575 UTC)
<6>[ 489.394165] [BATT] ID=1, level=87, vol=4130, temp=343, batt_current=334, chg_src=1, chg_en=1, full_bat=1200000, over_vchg=0, smem_vbus=1 at 483103455251 (2013-01-16 08:15:33.130938515 UTC)
<7>[ 490.611633] [GSNR][BMA250 NO_COMP] GSensor [19,-5,-722]
<7>[ 494.111663] [GSNR][BMA250 NO_COMP] GSensor [16,-11,-717]
<7>[ 494.482788] [DISP] mipi_dsi_set_backlight > set brightness to 85
<7>[ 494.502807] [DISP] mipi_dsi_set_backlight > set brightness to 84
<7>[ 494.520477] [DISP] mipi_dsi_set_backlight > set brightness to 82
<7>[ 494.538055] [DISP] mipi_dsi_set_backlight > set brightness to 81
<7>[ 494.556610] [DISP] mipi_dsi_set_backlight > set brightness to 80
<7>[ 494.575836] [DISP] mipi_dsi_set_backlight > set brightness to 79
<7>[ 494.594329] [DISP] mipi_dsi_set_backlight > set brightness to 78
<7>[ 494.613525] [DISP] mipi_dsi_set_backlight > set brightness to 76
<7>[ 494.631774] [DISP] mipi_dsi_set_backlight > set brightness to 75
<7>[ 494.651062] [DISP] mipi_dsi_set_backlight > set brightness to 74
<7>[ 494.669982] [DISP] mipi_dsi_set_backlight > set brightness to 73
<7>[ 494.692230] [DISP] mipi_dsi_set_backlight > set brightness to 70
<7>[ 494.710784] [DISP] mipi_dsi_set_backlight > set brightness to 69
<7>[ 494.730316] [DISP] mipi_dsi_set_backlight > set brightness to 67
<7>[ 494.749206] [DISP] mipi_dsi_set_backlight > set brightness to 66
<7>[ 494.767944] [DISP] mipi_dsi_set_backlight > set brightness to 65
<7>[ 494.786499] [DISP] mipi_dsi_set_backlight > set brightness to 63
<7>[ 494.805938] [DISP] mipi_dsi_set_backlight > set brightness to 62
<7>[ 494.825408] [DISP] mipi_dsi_set_backlight > set brightness to 61
<7>[ 494.844085] [DISP] mipi_dsi_set_backlight > set brightness to 58
<7>[ 494.863311] [DISP] mipi_dsi_set_backlight > set brightness to 57
<7>[ 494.884582] [DISP] mipi_dsi_set_backlight > set brightness to 56
<7>[ 494.903869] [DISP] mipi_dsi_set_backlight > set brightness to 54
<7>[ 494.922790] [DISP] mipi_dsi_set_backlight > set brightness to 53
<7>[ 494.943847] [DISP] mipi_dsi_set_backlight > set brightness to 52
<7>[ 494.962860] [DISP] mipi_dsi_set_backlight > set brightness to 50
<7>[ 494.983703] [DISP] mipi_dsi_set_backlight > set brightness to 49
<7>[ 495.001617] [DISP] mipi_dsi_set_backlight > set brightness to 47
<7>[ 495.024230] [DISP] mipi_dsi_set_backlight > set brightness to 45
<7>[ 495.042755] [DISP] mipi_dsi_set_backlight > set brightness to 44
<7>[ 495.062469] [DISP] mipi_dsi_set_backlight > set brightness to 42
<7>[ 495.081481] [DISP] mipi_dsi_set_backlight > set brightness to 41
<7>[ 495.100799] [DISP] mipi_dsi_set_backlight > set brightness to 40
<7>[ 495.120086] [DISP] mipi_dsi_set_backlight > set brightness to 38
<7>[ 495.139526] [DISP] mipi_dsi_set_backlight > set brightness to 37
<7>[ 495.159362] [DISP] mipi_dsi_set_backlight > set brightness to 36
<7>[ 495.183319] [DISP] mipi_dsi_set_backlight > set brightness to 33
<7>[ 495.203033] [DISP] mipi_dsi_set_backlight > set brightness to 32
<7>[ 495.222381] [DISP] mipi_dsi_set_backlight > set brightness to 30
<7>[ 495.242248] [DISP] mipi_dsi_set_backlight > set brightness to 29
<7>[ 495.260986] [DISP] mipi_dsi_set_backlight > set brightness to 27
<7>[ 495.281341] [DISP] mipi_dsi_set_backlight > set brightness to 26
<7>[ 495.298248] [DISP] mipi_dsi_set_backlight > set brightness to 25
<7>[ 495.315338] [DISP] mipi_dsi_set_backlight > set brightness to 24
<7>[ 495.332244] [DISP] mipi_dsi_set_backlight > set brightness to 21
<7>[ 495.349334] [DISP] mipi_dsi_set_backlight > set brightness to 20
<7>[ 495.366302] [DISP] mipi_dsi_set_backlight > set brightness to 19
<7>[ 495.383300] [DISP] mipi_dsi_set_backlight > set brightness to 18
<7>[ 495.400329] [DISP] mipi_dsi_set_backlight > set brightness to 17
<7>[ 495.417419] [DISP] mipi_dsi_set_backlight > set brightness to 16
<7>[ 495.434448] [DISP] mipi_dsi_set_backlight > set brightness to 14
<7>[ 495.451538] [DISP] mipi_dsi_set_backlight > set brightness to 13
<7>[ 495.467620] [DISP] mipi_dsi_set_backlight > set brightness to 12
<7>[ 495.483581] [DISP] mipi_dsi_set_backlight > set brightness to 11
<7>[ 495.500671] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 495.516784] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 495.533813] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 495.550811] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 495.567993] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 495.584991] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 495.602478] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 495.619354] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 495.636413] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 497.611602] [GSNR][BMA250 NO_COMP] GSensor [16,-2,-711]
<7>[ 501.113555] [GSNR][BMA250 NO_COMP] GSensor [14,-8,-711]
<6>[ 501.474609] request_suspend_state: sleep (3->3) at 495183441824 (2013-01-16 08:15:45.211260781 UTC)
<6>[ 501.476135] [R] early_suspend start
<6>[ 501.476989] sleep_stat.0: 0ms 0 0ms 0 - 0 0 667942912 - 1437248085 0 - 0 0 0 0 0(2013-01-16 08:15:45.213671669 UTC)
<6>[ 501.478393] [LS][CM3628] cm3628_early_suspend
<6>[ 501.479766] [LS][CM3628] lightsensor_disable
<6>[ 501.486785] [LS][CM3628] lightsensor_ioctl LIGHTSENSOR_IOCTL_ENABLE, value = 0
<6>[ 501.488220] [LS][CM3628] lightsensor_disable
<6>[ 501.489349] [LS][CM3628] lightsensor_release
<6>[ 501.494293] [LED]pm8029_led_brightness_set: data2 0x40000
<7>[ 501.499603] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 501.521453] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 501.540100] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 501.560363] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 501.577331] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 501.594848] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 501.597442] [GSNR][BMA250 NO_COMP] ESC_IOCTL_APP_SET_AFLAG: 0
<7>[ 501.598052] [GSNR][BMA250 NO_COMP] set Aflag to close gsensor
<7>[ 501.598358] [GSNR][BMA250 NO_COMP] sensor_close++
<7>[ 501.598907] [GSNR][BMA250 NO_COMP] gsensor_off++
<6>[ 501.599243] [GSNR] Gsensor disable
<7>[ 501.599548] [GSNR][BMA250 NO_COMP] BMA_set_mode: mode = 0x01
<7>[ 501.600555] [GSNR][BMA250 NO_COMP] gsensor_off--
<6>[ 501.601318] [GSNR][BMA250 NO_COMP] gsensor_aot_release
<7>[ 501.601898] [GSNR][BMA250 NO_COMP] sensor_close++
<7>[ 501.602203] [GSNR][BMA250 NO_COMP] gsensor_off++
<6>[ 501.602508] [GSNR] Gsensor disable
<7>[ 501.602813] [GSNR][BMA250 NO_COMP] BMA_set_mode: mode = 0x01
<7>[ 501.603546] [GSNR][BMA250 NO_COMP] gsensor_off--
<7>[ 501.612274] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 501.629852] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 501.655059] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 501.672210] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 501.690185] [DISP] mipi_dsi_set_backlight > set brightness to 0
<6>[ 501.694244] [VIB]vibrator_enable, er.ServerThread(parent:zygote): vibrates 0 msec
<6>[ 501.694580] [VIB]set_pmic_vibrator_off: +
<7>[ 501.983459] himax8526a_suspend: diag_command= 0
<6>[ 501.983795] himax8526a_suspend: enter
<6>[ 502.241333] [DISP] [DISP] msmfb_early_suspend
<6>[ 502.241546] [DISP] msm_fb_suspend_sub
<6>[ 502.241851] [DISP] msm_fb_blank_sub: blank_mode = 4
<4>[ 502.271209] [DISP] mdp_off
<7>[ 502.271484] [DISP] mipi_dsi_off
<6>[ 502.271850] [DISP] mipi_samsung_lcd_off
<6>[ 502.272033] [DISP] Panel Type = PANEL_ID_PIO_SAMSUNG_C2
<6>[ 502.392852] active wake lock PowerManagerService
<6>[ 502.393066] active wake lock usb_bus_active
<6>[ 502.393218] active wake lock vbus_present
<6>[ 502.393524] [R] early_suspend end
<6>[ 502.393707] PM: Syncing filesystems...
<6>[ 502.427856] sync done.
<6>[ 506.595367] call alarm, type 2, func alarm_triggered+0x0/0xd8, 500291000000 (s 500291000000)
<6>[ 516.263366] call alarm, type 3, func alarm_triggered+0x0/0xd8, 509959000000 (s 509959000000)
<4>[ 517.292388] dhd_detach thr:546 terminated OK
<4>[ 517.331390] dhd_detach thr:544 terminated OK
<4>[ 517.331787] dhd_detach thr:545 terminated OK
<4>[ 517.372711] wl_destroy_event_handler thr:543 terminated OK
<4>[ 517.410400] dhdsdio_htclk: HT Avail request error: -35
<4>[ 517.427703] ## wifi_remove
<4>[ 517.427886] wifi_set_power = 0
<6>[ 517.428192] pico_wifi_power: 0
<7>[ 517.428558] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0
<7>[ 517.428710] KEEP SLEEP CLK ALIVE
<7>[ 517.428894] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0 DONE
<4>[ 517.558563] wifi_set_carddetect = 0
<6>[ 517.558776] pico_wifi_set_carddetect: 0
<6>[ 517.559082] mmc1: Slot status change detected (1 -> 0)
<6>[ 517.560028] mmc1: card 0001 removed
<6>[ 549.392059] [BATT] M2A_RPC: set_charging: 1 at 543102448134 (2013-01-16 08:16:33.128832765 UTC)
<6>[ 549.395507] [BATT][tps65200] regh 0x00=2a, regh 0x01=29, regh 0x02=63, regh 0x03=83
<6>[ 549.397674] [BATT][tps65200] regh 0x04=50, 0x05=ff, regh 0x06=26
<6>[ 549.399444] [BATT][tps65200] regh 0x07=4, 0x08=0, regh 0x09=1, regh 0x0A=0
<6>[ 549.401916] [BATT][tps65200] regh 0x0B=bf, 0x0C=7f, regh 0x0D=ff, regh 0x0E=32
<6>[ 549.404785] [BATT][tps65200] Switch charger ON (SLOW): regh 0x03=87, regh 0x02=63
<6>[ 549.602294] [BATT][tps65200] Set VDPM back to original V: regh 0x03=83
<7>[ 559.110870] sd_blk_issue_rw_rq:(sd-qd)finish cmd(25) start 234164, size 12, time=779144 us
<7>[ 559.113037] sd_blk_issue_rw_rq: ---(sd-qd) start sector=234164, size 12, total time=781372 us
<7>[ 560.511566] sd_blk_issue_rw_rq:(sd-qd)finish cmd(25) start 234900, size 48, time=1069976 us
<7>[ 560.513153] sd_blk_issue_rw_rq: ---(sd-qd) start sector=234900, size 48, total time=1071563 us
<7>[ 561.605621] sd_blk_issue_rw_rq:(sd-qd)finish cmd(25) start 237796, size 64, time=904693 us
<7>[ 561.607208] sd_blk_issue_rw_rq: ---(sd-qd) start sector=237796, size 64, total time=906311 us
<7>[ 562.472686] sd_blk_issue_rw_rq:(sd-qd)finish cmd(25) start 255524, size 13, time=842102 us
<7>[ 562.474273] sd_blk_issue_rw_rq: ---(sd-qd) start sector=255524, size 13, total time=843688 us
<7>[ 563.683990] sd_blk_issue_rw_rq:(sd-qd)finish cmd(25) start 259076, size 48, time=886871 us
<7>[ 563.685577] sd_blk_issue_rw_rq: ---(sd-qd) start sector=259076, size 48, total time=888458 us
<6>[ 576.263488] call alarm, type 3, func alarm_triggered+0x0/0xd8, 569959000000 (s 569959000000)
<6>[ 609.391967] [BATT] M2A_RPC: level_update: 88 at 603101746229 (2013-01-16 08:17:33.128710694 UTC)
<6>[ 609.402130] [BATT] power_supply_changed: battery at 603111908583 (2013-01-16 08:17:33.138903566 UTC)
<6>[ 609.408508] [BATT] ID=1, level=88, vol=4159, temp=343, batt_current=408, chg_src=1, chg_en=1, full_bat=1200000, over_vchg=0, smem_vbus=1 at 603118958144 (2013-01-16 08:17:33.145220704 UTC)
<6>[ 609.411621] [BATT] ID=1, level=88, vol=4159, temp=343, batt_current=408, chg_src=1, chg_en=1, full_bat=1200000, over_vchg=0, smem_vbus=1 at 603122040420 (2013-01-16 08:17:33.148333498 UTC)
<4>[ 612.955963] ## wifi_probe
<4>[ 612.956146] wifi_set_power = 1
<6>[ 612.956298] pico_wifi_power: 1
<7>[ 612.956695] htc_wifi_bt_sleep_clk_ctl ON=1, ID=0
<7>[ 612.957000] htc_wifi_bt_sleep_clk_ctl ON=1, ID=0 DONE
<4>[ 613.078124] wifi_set_carddetect = 1
<6>[ 613.078430] pico_wifi_set_carddetect: 1
<6>[ 613.078613] mmc1: Slot status change detected (0 -> 1)
<4>[ 613.081634]
<4>[ 613.081665] Dongle Host Driver, version 5.90.195.23
<4>[ 613.081665] Compiled in drivers/net/wireless/bcmdhd on Jan 16 2013 at 09:39:18
<6>[ 613.127319] mmc1: new high speed SDIO card at address 0001
<4>[ 613.135284] F1 signature read @0x18000000=0x16044330
<4>[ 613.141937] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 613.147979] wl_create_event_handler thr:575 started
<4>[ 613.162689] p2p0: P2P Interface Registered
<4>[ 613.163848] dhd_attach thr:576 started
<4>[ 613.164123] dhd_attach thr:577 started
<4>[ 613.164367] dhd_attach thr:578 started
<4>[ 613.164916] wifi_get_mac_addr
<4>[ 613.165130] pico_wifi_get_mac_addr = a8 26 d9 17 23 d6
<4>[ 613.169891] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
<4>[ 613.170227] wifi_set_power = 0
<6>[ 613.170410] pico_wifi_power: 0
<7>[ 613.170928] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0
<7>[ 613.171234] KEEP SLEEP CLK ALIVE
<7>[ 613.171386] htc_wifi_bt_sleep_clk_ctl ON=0, ID=0 DONE
<4>[ 613.298004] =========== WLAN placed in RESET ========
<7>[ 617.705078] [KEY] gpio_event_input_irq_handler, irq=84, use_irq=1
<7>[ 617.706542] [KEY] gpio_event_input_irq_handler: key 1-74, 0 (20) changed to 1
<6>[ 617.717041] request_suspend_state: wakeup (3->0) at 611425903944 (2013-01-16 08:17:41.453722901 UTC)
<6>[ 617.718658] [R] late_resume start
<4>[ 617.720031] [DISP] msmfb_early_resume
<4>[ 617.720764] [DISP] msm_fb_resume_sub
<4>[ 617.721923] [DISP] mdp_on
<7>[ 617.722930] [DISP] mipi_dsi_on
<6>[ 617.724304] [DISP] pico_panel_power: power on.
<6>[ 617.733856] [LS][CM3628] lightsensor_open
<6>[ 617.734710] [LS][CM3628] lightsensor_ioctl LIGHTSENSOR_IOCTL_ENABLE, value = 1
<6>[ 617.736083] [LS][CM3628] lightsensor_enable
<6>[ 617.762725] [DISP] Display On
<6>[ 617.764129] [DISP] Panel Type = PANEL_ID_PIO_SAMSUNG_C2
<6>[ 617.791778] [LS][CM3628] get_ls_adc_value:resume 1
<6>[ 617.794036] [LS][CM3628] get_ls_adc_value: raw adc = 0x3, ls_calibrate = 0
<6>[ 617.795989] [LS][CM3628] report_lsensor_input_event: ADC=0x010, Level=3, l_thd = 0x6, h_thd = 0x12
<6>[ 617.803619] [LED]pm8029_led_brightness_set: data2 0x4c800
<6>[ 617.834381] [GSNR][BMA250 NO_COMP] gsensor_aot_open
<7>[ 617.834564] [GSNR][BMA250 NO_COMP] sensor_open++
<3>[ 617.834747] [GSNR][BMA250 NO_COMP ERROR] sensor_open:unable to open due to the flag:0, 0
<7>[ 617.835052] [GSNR][BMA250 NO_COMP] ESC_IOCTL_APP_SET_AFLAG: 1
<7>[ 617.835388] [GSNR][BMA250 NO_COMP] ESC_IOCTL_APP_SET_DELAY: 66
<7>[ 617.835540] [GSNR][BMA250 NO_COMP] sensor_poll_interval_set: 66 ms
<7>[ 617.835998] [GSNR][BMA250 NO_COMP] sensor_open++
<7>[ 617.836456] [GSNR][BMA250 NO_COMP] BMA_Init: bma250_RANGE_SEL_REG++: range = 0x03, bw = 0x0a
<7>[ 617.837219] [GSNR][BMA250 NO_COMP] BMA_Init: bma250_RANGE_SEL_REG--: range = 0x03, bw = 0x0a
<6>[ 617.837554] [GSNR] Gsensor enable
<7>[ 617.837707] [GSNR][BMA250 NO_COMP] BMA_set_mode: mode = 0x00
<7>[ 617.840637] [GSNR][BMA250 NO_COMP] Ignore X = 11
<7>[ 617.841003] [KEY] gpio_event_input_irq_handler, irq=84, use_irq=1
<7>[ 617.841156] [KEY] gpio_event_input_irq_handler: key 1-74, 0 (20) changed to 0
<7>[ 617.841674] [GSNR][BMA250 NO_COMP] Ignore Y = -711
<7>[ 617.841827] [GSNR][BMA250 NO_COMP] Ignore Z = -5
<7>[ 617.843170] [GSNR][BMA250 NO_COMP] ESC_IOCTL_APP_SET_DELAY: 200
<7>[ 617.843353] [GSNR][BMA250 NO_COMP] sensor_poll_interval_set: 200 ms
<7>[ 617.843872] [GSNR][BMA250 NO_COMP] ESC_IOCTL_APP_SET_DELAY: 66
<7>[ 617.844024] [GSNR][BMA250 NO_COMP] sensor_poll_interval_set: 66 ms
<7>[ 617.897033] [DISP] Init done!
<6>[ 617.897583] himax8526a_resume: enter
<7>[ 617.911590] [GSNR][BMA250 NO_COMP] Ignore X = 19
<7>[ 617.911926] [GSNR][BMA250 NO_COMP] Ignore Y = -708
<7>[ 617.912109] [GSNR][BMA250 NO_COMP] Ignore Z = 39
<7>[ 617.952087] himax8526a_resume: diag_command= 0
<6>[ 617.971466] [LS][CM3628] cm3628_late_resume
<6>[ 617.971710] sleep_stat.3: 0ms 0 0ms 0 - 0 0 667942912 - 1437248085 0 - 0 0 0 0 0(2013-01-16 08:17:41.708483654 UTC)
<6>[ 617.972015] [R] late_resume end
<7>[ 618.010253] [DISP] mipi_samsung_display_on+
<6>[ 618.050415] [DISP] mipi_novatek_bkl_ctrl > on = 1
<7>[ 618.050537] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.057891] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.068206] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.078369] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.095397] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.113250] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.131805] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.150390] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.169708] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.187225] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.205291] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.223602] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.242767] [DISP] mipi_dsi_set_backlight > set brightness to 10
<7>[ 618.260009] [DISP] mipi_dsi_set_backlight > set brightness to 12
<7>[ 618.281524] [DISP] mipi_dsi_set_backlight > set brightness to 14
<7>[ 618.299804] [DISP] mipi_dsi_set_backlight > set brightness to 16
<7>[ 618.318908] [DISP] mipi_dsi_set_backlight > set brightness to 18
<7>[ 618.336212] [DISP] mipi_dsi_set_backlight > set brightness to 20
<7>[ 618.360290] [DISP] mipi_dsi_set_backlight > set brightness to 21
<7>[ 618.385070] [DISP] mipi_dsi_set_backlight > set brightness to 25
<7>[ 618.406921] [DISP] mipi_dsi_set_backlight > set brightness to 27
<7>[ 618.426513] [DISP] mipi_dsi_set_backlight > set brightness to 30
<7>[ 618.445465] [DISP] mipi_dsi_set_backlight > set brightness to 32
<7>[ 618.462890] [DISP] mipi_dsi_set_backlight > set brightness to 35
<7>[ 618.484436] [DISP] mipi_dsi_set_backlight > set brightness to 37
<7>[ 618.496398] [DISP] mipi_dsi_set_backlight > set brightness to 38
<7>[ 618.515686] [DISP] mipi_dsi_set_backlight > set brightness to 40
<7>[ 618.529876] [DISP] mipi_dsi_set_backlight > set brightness to 42
<7>[ 618.548858] [DISP] mipi_dsi_set_backlight > set brightness to 43
<7>[ 618.565490] [DISP] mipi_dsi_set_backlight > set brightness to 45
<7>[ 618.580078] [DISP] mipi_dsi_set_backlight > set brightness to 48
<7>[ 618.598571] [DISP] mipi_dsi_set_backlight > set brightness to 50
<7>[ 618.631988] [DISP] mipi_dsi_set_backlight > set brightness to 52
<7>[ 618.632049] [DISP] mipi_dsi_set_backlight > set brightness to 53
<6>[ 618.642425] [LS][CM3628] get_ls_adc_value: raw adc = 0x32, ls_calibrate = 0
<6>[ 618.643218] [LS][CM3628] report_lsensor_input_event: ADC=0x02D, Level=5, l_thd = 0x20, h_thd = 0x30e
<7>[ 618.664916] [DISP] mipi_dsi_set_backlight > set brightness to 55
<7>[ 618.668182] [DISP] mipi_dsi_set_backlight > set brightness to 57
<7>[ 618.685241] [DISP] mipi_dsi_set_backlight > set brightness to 60
<7>[ 618.714721] [DISP] mipi_dsi_set_backlight > set brightness to 62
<7>[ 618.719238] [DISP] mipi_dsi_set_backlight > set brightness to 64
<7>[ 618.747894] [DISP] mipi_dsi_set_backlight > set brightness to 65
<7>[ 618.752960] [DISP] mipi_dsi_set_backlight > set brightness to 67
<7>[ 618.781036] [DISP] mipi_dsi_set_backlight > set brightness to 69
<7>[ 618.788391] [DISP] mipi_dsi_set_backlight > set brightness to 72
<7>[ 618.805755] [DISP] mipi_dsi_set_backlight > set brightness to 73
<6>[ 618.816040] S1@354,639
<7>[ 618.830749] [DISP] mipi_dsi_set_backlight > set brightness to 75
<7>[ 618.840118] [DISP] mipi_dsi_set_backlight > set brightness to 77
<6>[ 618.848724] [VIB]vibrator_enable, WindowManagerPo(parent:zygote): vibrates 0 msec
<6>[ 618.848907] [VIB]set_pmic_vibrator_off: +
<6>[ 618.849426] [VIB]vibrator_enable, WindowManagerPo(parent:zygote): vibrates 20 msec
<6>[ 618.849609] [VIB]set_pmic_vibrator_on: +
<7>[ 618.857208] [DISP] mipi_dsi_set_backlight > set brightness to 79
<6>[ 618.869567] [VIB]vibrator_enable, er.ServerThread(parent:zygote): vibrates 0 msec
<6>[ 618.869598] [VIB]set_pmic_vibrator_off: +
<7>[ 618.880798] [DISP] mipi_dsi_set_backlight > set brightness to 81
<7>[ 618.891296] [DISP] mipi_dsi_set_backlight > set brightness to 82
<7>[ 618.909301] [DISP] mipi_dsi_set_backlight > set brightness to 85
<7>[ 618.926330] [DISP] mipi_dsi_set_backlight > set brightness to 86
<6>[ 619.000671] E1@919, 629
<6>[ 619.021026] [VIB]vibrator_enable, WindowManagerPo(parent:zygote): vibrates 0 msec
<6>[ 619.021484] [VIB]set_pmic_vibrator_off: +
<6>[ 619.021881] [VIB]vibrator_enable, WindowManagerPo(parent:zygote): vibrates 20 msec
<6>[ 619.022186] [VIB]set_pmic_vibrator_on: +
<6>[ 619.042633] [VIB]vibrator_enable, er.ServerThread(parent:zygote): vibrates 0 msec
<6>[ 619.042663] [VIB]set_pmic_vibrator_off: +
<7>[ 621.272064] [GSNR][BMA250 NO_COMP] GSensor [2,-8,-717]
<7>[ 624.771606] [GSNR][BMA250 NO_COMP] GSensor [11,-14,-722]
@BhargzShukla
Copy link

Can you pull a dmesg of display?? I wanna see where mine f**ks up...

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment