Created
July 28, 2014 23:19
-
-
Save P233/25aaf6b16b8a85cef7e0 to your computer and use it in GitHub Desktop.
Can't setup wifi dongle for raspberry pi
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [root@alarmpi netctl]# lsusb | |
| Bus 001 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter | |
| Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter | |
| Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. | |
| Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub | |
| [root@alarmpi netctl]# lsmod | |
| Module Size Used by | |
| cfg80211 440121 0 | |
| snd_soc_wm8804 7908 0 | |
| snd_soc_pcm512x 8984 0 | |
| 8192cu 546045 0 | |
| snd_soc_bcm2708_i2s 5657 0 | |
| regmap_mmio 2838 1 snd_soc_bcm2708_i2s | |
| snd_soc_core 155972 3 snd_soc_pcm512x,snd_soc_wm8804,snd_soc_bcm2708_i2s | |
| leds_gpio 2142 0 | |
| led_class 4162 1 leds_gpio | |
| snd_compress 8247 1 snd_soc_core | |
| spi_bcm2708 4844 0 | |
| snd_pcm_dmaengine 5533 1 snd_soc_core | |
| regmap_spi 1941 3 snd_soc_pcm512x,snd_soc_wm8804,snd_soc_core | |
| bcm2708_dmaengine 5224 0 | |
| virt_dma 2309 1 bcm2708_dmaengine | |
| regmap_i2c 1685 3 snd_soc_pcm512x,snd_soc_wm8804,snd_soc_core | |
| i2c_bcm2708 4895 0 | |
| snd_bcm2835 18281 0 | |
| snd_pcm 81802 3 snd_bcm2835,snd_soc_core,snd_pcm_dmaengine | |
| snd_page_alloc 5192 1 snd_pcm | |
| snd_timer 20370 1 snd_pcm | |
| snd 61672 5 snd_bcm2835,snd_soc_core,snd_timer,snd_pcm,snd_compress | |
| bcm2708_rng 1044 0 | |
| rng_core 4159 1 bcm2708_rng | |
| ipv6 319667 0 | |
| [root@alarmpi netctl]# | |
| [root@alarmpi netctl]# iwconfig wlan0 | |
| wlan0 unassociated Nickname:"<WIFI@REALTEK>" | |
| Mode:Managed Frequency=2.462 GHz Access Point: Not-Associated | |
| Sensitivity:0/0 | |
| Retry:off RTS thr:off Fragment thr:off | |
| Encryption key:off | |
| Power Management:off | |
| Link Quality:0 Signal level:0 Noise level:0 | |
| Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 | |
| Tx excessive retries:0 Invalid misc:0 Missed beacon:0 | |
| [root@alarmpi netctl]# | |
| [root@alarmpi netctl]# netctl start home | |
| Job for netctl@home.service failed. See 'systemctl status netctl@home.service' and 'journalctl -xn' for details. | |
| [root@alarmpi netctl]# systemctl status netctl@home.service | |
| * netctl@home.service - Networking for netctl profile home | |
| Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static) | |
| Active: failed (Result: exit-code) since Mon 2014-07-28 16:53:49 MDT; 3s ago | |
| Docs: man:netctl.profile(5) | |
| Process: 805 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE) | |
| Main PID: 805 (code=exited, status=1/FAILURE) | |
| Jul 28 16:53:25 alarmpi network[805]: Starting network profile 'home'... | |
| Jul 28 16:53:26 alarmpi network[805]: ioctl[SIOCSIWAP]: Operation not permitted | |
| Jul 28 16:53:26 alarmpi network[805]: ioctl[SIOCSIWENCODEEXT]: Invalid argument | |
| Jul 28 16:53:26 alarmpi network[805]: ioctl[SIOCSIWENCODEEXT]: Invalid argument | |
| Jul 28 16:53:48 alarmpi network[805]: WPA association/authentication failed for interface 'wlan0' | |
| Jul 28 16:53:49 alarmpi network[805]: Failed to bring the network up for profile 'home' | |
| Jul 28 16:53:49 alarmpi systemd[1]: netctl@home.service: main process exited, code=exited, status=1/FAILURE | |
| Jul 28 16:53:49 alarmpi systemd[1]: Failed to start Networking for netctl profile home. | |
| Jul 28 16:53:49 alarmpi systemd[1]: Unit netctl@home.service entered failed state. | |
| [root@alarmpi netctl]# journalctl -xn | |
| -- Logs begin at Wed 1969-12-31 17:00:05 MST, end at Mon 2014-07-28 16:53:49 MDT. -- | |
| Jul 28 16:53:37 alarmpi kernel: rtw_tkip_decrypt(wlan0) no_gkey_bc_cnt:2, no_gkey_mc_cnt:0 | |
| Jul 28 16:53:37 alarmpi kernel: rtw_wx_set_mlme | |
| Jul 28 16:53:37 alarmpi kernel: rtw_wx_set_mlme, cmd=0, reason=3 | |
| Jul 28 16:53:48 alarmpi network[805]: WPA association/authentication failed for interface 'wlan0' | |
| Jul 28 16:53:48 alarmpi kernel: rtw_wx_set_mlme | |
| Jul 28 16:53:48 alarmpi kernel: rtw_wx_set_mlme, cmd=0, reason=3 | |
| Jul 28 16:53:49 alarmpi network[805]: Failed to bring the network up for profile 'home' | |
| Jul 28 16:53:49 alarmpi systemd[1]: netctl@home.service: main process exited, code=exited, status=1/FAILURE | |
| Jul 28 16:53:49 alarmpi systemd[1]: Failed to start Networking for netctl profile home. | |
| -- Subject: Unit netctl@home.service has failed | |
| -- Defined-By: systemd | |
| -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel | |
| -- | |
| -- Unit netctl@home.service has failed. | |
| -- | |
| -- The result is failed. | |
| Jul 28 16:53:49 alarmpi systemd[1]: Unit netctl@home.service entered failed state. | |
| [root@alarmpi netctl]# | |
| [root@alarmpi wpa_supplicant]# wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf | |
| Successfully initialized wpa_supplicant | |
| nl80211: Driver does not support authentication/association or connect commands | |
| wlan0: Failed to initialize driver interface | |
| [root@alarmpi wpa_supplicant]# |
puxxustc
commented
Jul 29, 2014
Might not be related to your case, but I had issues with wifi on kernel 3.18.10 with the same messages:
kernel: rtw_wx_set_mlme
kernel: rtw_wx_set_mlme, cmd=0, reason=3
My fix was to downgrade kernel to 3.12.36 (latest in 3.12.x) using rpi-update:
UPDATE_SELF=0 SKIP_BACKUP=1 rpi-update f74b92120e0d469fc5c2dc85b2b5718d877e1cbb
yaourt 8192cu-dkms
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment