Created
November 29, 2018 20:51
-
-
Save PabloMansanet/f24a5af11f5f2f3372bb07de5e00df2c to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[Nov29 21:07] Linux version 4.19.4-arch1-1-ARCH (builduser@heftig-22537) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Fri Nov 23 09:06:58 UTC 2018 | |
[ +0.000000] Command line: BOOT_IMAGE=(loop)/arch/boot/x86_64/vmlinuz module_blacklist=intel_lpss_pci img_dev=/dev/disk/by-uuid/df54812e-95b6-40ba-a398-e5d94d84d3fd img_loop=/boot/isos/halberd-2018.11.28-x86_64.iso earlymodules=loop | |
[ +0.000000] KERNEL supported cpus: | |
[ +0.000000] Intel GenuineIntel | |
[ +0.000000] AMD AuthenticAMD | |
[ +0.000000] Centaur CentaurHauls | |
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' | |
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' | |
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' | |
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' | |
[ +0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' | |
[ +0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 | |
[ +0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 | |
[ +0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 | |
[ +0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. | |
[ +0.000000] BIOS-provided physical RAM map: | |
[ +0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable | |
[ +0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved | |
[ +0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004b237fff] usable | |
[ +0.000000] BIOS-e820: [mem 0x000000004b238000-0x000000004caa2fff] reserved | |
[ +0.000000] BIOS-e820: [mem 0x000000004caa3000-0x000000004cb29fff] ACPI data | |
[ +0.000000] BIOS-e820: [mem 0x000000004cb2a000-0x000000004cbdefff] ACPI NVS | |
[ +0.000000] BIOS-e820: [mem 0x000000004cbdf000-0x000000004fc35fff] reserved | |
[ +0.000000] BIOS-e820: [mem 0x000000004fc36000-0x000000004fd0efff] type 20 | |
[ +0.000000] BIOS-e820: [mem 0x000000004fd0f000-0x000000004fd0ffff] usable | |
[ +0.000000] BIOS-e820: [mem 0x000000004fd10000-0x000000005cffffff] reserved | |
[ +0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved | |
[ +0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved | |
[ +0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved | |
[ +0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved | |
[ +0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved | |
[ +0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved | |
[ +0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000029effffff] usable | |
[ +0.000000] NX (Execute Disable) protection: active | |
[ +0.000000] efi: EFI v2.70 by American Megatrends | |
[ +0.000000] efi: ACPI 2.0=0x4cac6000 ACPI=0x4cac6000 SMBIOS=0x4fa8c000 SMBIOS 3.0=0x4fa8b000 MEMATTR=0x49bcd018 ESRT=0x49bd2f98 | |
[ +0.000000] SMBIOS 3.1.1 present. | |
[ +0.000000] DMI: HP HP Spectre x360 Convertible 13-ap0xxx/8514, BIOS F.06 10/04/2018 | |
[ +0.000000] tsc: Detected 2000.000 MHz processor | |
[ +0.000000] tsc: Detected 1992.000 MHz TSC | |
[ +0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved | |
[ +0.000001] e820: remove [mem 0x000a0000-0x000fffff] usable | |
[ +0.000004] last_pfn = 0x29f000 max_arch_pfn = 0x400000000 | |
[ +0.000002] MTRR default type: uncachable | |
[ +0.000001] MTRR fixed ranges enabled: | |
[ +0.000001] 00000-9FFFF write-back | |
[ +0.000000] A0000-BFFFF uncachable | |
[ +0.000000] C0000-DFFFF write-back | |
[ +0.000001] E0000-FFFFF write-protect | |
[ +0.000000] MTRR variable ranges enabled: | |
[ +0.000001] 0 base 00FF000000 mask 7FFF000000 write-protect | |
[ +0.000001] 1 base 0000000000 mask 7FC0000000 write-back | |
[ +0.000000] 2 base 0040000000 mask 7FF0000000 write-back | |
[ +0.000001] 3 base 0050000000 mask 7FF8000000 write-back | |
[ +0.000000] 4 base 0058000000 mask 7FFF800000 write-back | |
[ +0.000001] 5 base 0100000000 mask 7F00000000 write-back | |
[ +0.000000] 6 base 0200000000 mask 7E00000000 write-back | |
[ +0.000000] 7 base 4000000000 mask 6000000000 write-combining | |
[ +0.000001] 8 disabled | |
[ +0.000000] 9 disabled | |
[ +0.001080] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT | |
[ +0.000196] last_pfn = 0x4fd10 max_arch_pfn = 0x400000000 | |
[ +0.005092] esrt: Reserving ESRT space from 0x0000000049bd2f98 to 0x0000000049bd2fd0. | |
[ +0.000008] Scanning 1 areas for low memory corruption | |
[ +0.000002] Base memory trampoline at [(____ptrval____)] 98000 size 24576 | |
[ +0.000002] Using GB pages for direct mapping | |
[ +0.000001] BRK [0x09201000, 0x09201fff] PGTABLE | |
[ +0.000002] BRK [0x09202000, 0x09202fff] PGTABLE | |
[ +0.000000] BRK [0x09203000, 0x09203fff] PGTABLE | |
[ +0.000015] BRK [0x09204000, 0x09204fff] PGTABLE | |
[ +0.000001] BRK [0x09205000, 0x09205fff] PGTABLE | |
[ +0.000110] BRK [0x09206000, 0x09206fff] PGTABLE | |
[ +0.000032] Secure boot could not be determined | |
[ +0.000000] RAMDISK: [mem 0x3376d000-0x35badfff] | |
[ +0.000006] ACPI: Early table checksum verification disabled | |
[ +0.000002] ACPI: RSDP 0x000000004CAC6000 000024 (v02 HPQOEM) | |
[ +0.000002] ACPI: XSDT 0x000000004CAC60C0 000104 (v01 HPQOEM SLIC-MPC 01072009 HP 00010013) | |
[ +0.000004] ACPI: FACP 0x000000004CB125F0 000114 (v06 HPQOEM SLIC-MPC 01072009 HP 00010013) | |
[ +0.000004] ACPI: DSDT 0x000000004CAC6258 04C391 (v02 HPQOEM 8514 01072009 ACPI 20160527) | |
[ +0.000002] ACPI: FACS 0x000000004CBDC080 000040 | |
[ +0.000001] ACPI: APIC 0x000000004CB12708 0000BC (v04 HPQOEM 8514 01072009 HP 00010013) | |
[ +0.000002] ACPI: FPDT 0x000000004CB127C8 000044 (v01 HPQOEM 8514 01072009 HP 00010013) | |
[ +0.000001] ACPI: FIDT 0x000000004CB12810 00009C (v01 HPQOEM 8514 01072009 HP 00010013) | |
[ +0.000002] ACPI: MCFG 0x000000004CB128B0 00003C (v01 HPQOEM 8514 01072009 HP 00000097) | |
[ +0.000002] ACPI: SSDT 0x000000004CB128F0 000334 (v01 HPQOEM 8514 00001000 ACPI 20160527) | |
[ +0.000002] ACPI: SSDT 0x000000004CB12C28 004793 (v02 HPQOEM 8514 00001000 ACPI 20160527) | |
[ +0.000001] ACPI: SSDT 0x000000004CB173C0 0017C6 (v02 HPQOEM 8514 00003000 ACPI 20160527) | |
[ +0.000002] ACPI: MSDM 0x000000004CB18B88 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00010013) | |
[ +0.000002] ACPI: SSDT 0x000000004CB18BE0 0031C6 (v02 HPQOEM 8514 00003000 ACPI 20160527) | |
[ +0.000001] ACPI: HPET 0x000000004CB1BDA8 000038 (v01 HPQOEM 8514 00000002 HP 01000013) | |
[ +0.000002] ACPI: SSDT 0x000000004CB1BDE0 001984 (v02 HPQOEM 8514 00001000 ACPI 20160527) | |
[ +0.000002] ACPI: SSDT 0x000000004CB1D768 0029C7 (v02 HPQOEM 8514 00000000 ACPI 20160527) | |
[ +0.000001] ACPI: UEFI 0x000000004CB20130 000048 (v01 HPQOEM 8514 00000002 HP 01000013) | |
[ +0.000002] ACPI: LPIT 0x000000004CB20178 00005C (v01 HPQOEM 8514 00000002 HP 01000013) | |
[ +0.000002] ACPI: SSDT 0x000000004CB201D8 001423 (v02 HPQOEM 8514 00001000 ACPI 20160527) | |
[ +0.000002] ACPI: SSDT 0x000000004CB21600 0005C9 (v02 HPQOEM 8514 00000000 ACPI 20160527) | |
[ +0.000001] ACPI: DBGP 0x000000004CB21BD0 000034 (v01 HPQOEM 8514 00000002 HP 01000013) | |
[ +0.000002] ACPI: DBG2 0x000000004CB21C08 000054 (v00 HPQOEM 8514 00000002 HP 01000013) | |
[ +0.000001] ACPI: SSDT 0x000000004CB21C60 000DCF (v02 HPQOEM 8514 00001000 ACPI 20160527) | |
[ +0.000002] ACPI: SSDT 0x000000004CB22A30 000144 (v02 HPQOEM 8514 00001000 ACPI 20160527) | |
[ +0.000002] ACPI: DMAR 0x000000004CB22B78 0000A8 (v01 HPQOEM 8514 00000002 HP 01000013) | |
[ +0.000001] ACPI: NHLT 0x000000004CB22C20 0017B0 (v00 HPQOEM 8514 00000002 HP 01000013) | |
[ +0.000002] ACPI: SSDT 0x000000004CB243D0 00009D (v01 HPQOEM 8514 00000001 ACPI 20160527) | |
[ +0.000002] ACPI: SSDT 0x000000004CB24470 000060 (v01 HPQOEM 8514 00000001 ACPI 20160527) | |
[ +0.000002] ACPI: TPM2 0x000000004CB244D0 000034 (v04 HPQOEM 8514 00000001 HP 00000000) | |
[ +0.000001] ACPI: WSMT 0x000000004CB24508 000028 (v01 HPQOEM 8514 01072009 HP 00010013) | |
[ +0.000002] ACPI: BGRT 0x000000004CB24530 000038 (v01 HPQOEM 8514 01072009 HP 00010013) | |
[ +0.000004] ACPI: Local APIC address 0xfee00000 | |
[ +0.000198] No NUMA configuration found | |
[ +0.000001] Faking a node at [mem 0x0000000000000000-0x000000029effffff] | |
[ +0.000002] NODE_DATA(0) allocated [mem 0x29effa000-0x29effdfff] | |
[ +0.000013] Zone ranges: | |
[ +0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] | |
[ +0.000001] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] | |
[ +0.000001] Normal [mem 0x0000000100000000-0x000000029effffff] | |
[ +0.000000] Device empty | |
[ +0.000001] Movable zone start for each node | |
[ +0.000000] Early memory node ranges | |
[ +0.000001] node 0: [mem 0x0000000000001000-0x000000000009efff] | |
[ +0.000000] node 0: [mem 0x0000000000100000-0x000000004b237fff] | |
[ +0.000001] node 0: [mem 0x000000004fd0f000-0x000000004fd0ffff] | |
[ +0.000000] node 0: [mem 0x0000000100000000-0x000000029effffff] | |
[ +0.000198] Reserved but unavailable: 20009 pages | |
[ +0.000001] Initmem setup node 0 [mem 0x0000000000001000-0x000000029effffff] | |
[ +0.000001] On node 0 totalpages: 2007511 | |
[ +0.000001] DMA zone: 64 pages used for memmap | |
[ +0.000000] DMA zone: 23 pages reserved | |
[ +0.000000] DMA zone: 3998 pages, LIFO batch:0 | |
[ +0.000052] DMA32 zone: 4745 pages used for memmap | |
[ +0.000000] DMA32 zone: 303673 pages, LIFO batch:63 | |
[ +0.005016] Normal zone: 26560 pages used for memmap | |
[ +0.000001] Normal zone: 1699840 pages, LIFO batch:63 | |
[ +0.022013] Reserving Intel graphics memory at [mem 0x59000000-0x5cffffff] | |
[ +0.000545] ACPI: PM-Timer IO Port: 0x1808 | |
[ +0.000001] ACPI: Local APIC address 0xfee00000 | |
[ +0.000005] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) | |
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) | |
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) | |
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) | |
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) | |
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) | |
[ +0.000001] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) | |
[ +0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) | |
[ +0.000071] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 | |
[ +0.000001] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
[ +0.000001] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
[ +0.000001] ACPI: IRQ0 used by override. | |
[ +0.000000] ACPI: IRQ9 used by override. | |
[ +0.000001] Using ACPI (MADT) for SMP configuration information | |
[ +0.000001] ACPI: HPET id: 0x8086a201 base: 0xfed00000 | |
[ +0.000005] smpboot: Allowing 8 CPUs, 0 hotplug CPUs | |
[ +0.000009] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] | |
[ +0.000001] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] | |
[ +0.000001] PM: Registered nosave memory: [mem 0x4b238000-0x4caa2fff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0x4caa3000-0x4cb29fff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0x4cb2a000-0x4cbdefff] | |
[ +0.000001] PM: Registered nosave memory: [mem 0x4cbdf000-0x4fc35fff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0x4fc36000-0x4fd0efff] | |
[ +0.000001] PM: Registered nosave memory: [mem 0x4fd10000-0x5cffffff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0x5d000000-0xdfffffff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] | |
[ +0.000001] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] | |
[ +0.000001] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] | |
[ +0.000001] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] | |
[ +0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] | |
[ +0.000001] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] | |
[ +0.000001] [mem 0x5d000000-0xdfffffff] available for PCI devices | |
[ +0.000001] Booting paravirtualized kernel on bare hardware | |
[ +0.000002] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns | |
[ +0.064023] random: get_random_bytes called from start_kernel+0x95/0x53f with crng_init=0 | |
[ +0.000005] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1 | |
[ +0.000162] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 | |
[ +0.000004] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 | |
[ +0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 | |
[ +0.000013] Built 1 zonelists, mobility grouping on. Total pages: 1976119 | |
[ +0.000000] Policy zone: Normal | |
[ +0.000001] Kernel command line: BOOT_IMAGE=(loop)/arch/boot/x86_64/vmlinuz module_blacklist=intel_lpss_pci img_dev=/dev/disk/by-uuid/df54812e-95b6-40ba-a398-e5d94d84d3fd img_loop=/boot/isos/halberd-2018.11.28-x86_64.iso earlymodules=loop | |
[ +0.003540] Calgary: detecting Calgary via BIOS EBDA area | |
[ +0.000001] Calgary: Unable to locate Rio Grande table in EBDA - bailing! | |
[ +0.017864] Memory: 7724556K/8030044K available (12300K kernel code, 1374K rwdata, 3640K rodata, 1532K init, 3860K bss, 305488K reserved, 0K cma-reserved) | |
[ +0.000070] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 | |
[ +0.000004] ftrace: allocating 35539 entries in 139 pages | |
[ +0.009095] rcu: Preemptible hierarchical RCU implementation. | |
[ +0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. | |
[ +0.000000] rcu: RCU dyntick-idle grace-period acceleration is enabled. | |
[ +0.000001] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. | |
[ +0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. | |
[ +0.000001] Tasks RCU enabled. | |
[ +0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 | |
[ +0.000901] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16 | |
[ +0.000176] rcu: Offload RCU callbacks from CPUs: (none). | |
[ +0.000182] Console: colour dummy device 80x25 | |
[ +0.000003] console [tty0] enabled | |
[ +0.000011] ACPI: Core revision 20180810 | |
[ +0.000518] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns | |
[ +0.000052] hpet clockevent registered | |
[ +0.000050] APIC: Switch to symmetric I/O mode setup | |
[ +0.000002] DMAR: Host address width 39 | |
[ +0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 | |
[ +0.000004] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e | |
[ +0.000001] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 | |
[ +0.000002] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da | |
[ +0.000001] DMAR: RMRR base: 0x0000004d7fc000 end: 0x0000004da45fff | |
[ +0.000002] DMAR: RMRR base: 0x00000058800000 end: 0x0000005cffffff | |
[ +0.000001] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 | |
[ +0.000001] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 | |
[ +0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. | |
[ +0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. | |
[ +0.002082] DMAR-IR: Enabled IRQ remapping in xapic mode | |
[ +0.000000] x2apic: IRQ remapping doesn't support X2APIC mode | |
[ +0.005637] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
[ +0.015567] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns | |
[ +0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3985.00 BogoMIPS (lpj=6640000) | |
[ +0.000002] pid_max: default: 32768 minimum: 301 | |
[ +0.000727] Security Framework initialized | |
[ +0.000001] Yama: becoming mindful. | |
[ +0.000004] AppArmor: AppArmor disabled by boot time parameter | |
[ +0.000943] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) | |
[ +0.000454] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
[ +0.000020] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) | |
[ +0.000013] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) | |
[ +0.000148] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' | |
[ +0.000000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) | |
[ +0.000004] mce: CPU supports 10 MCE banks | |
[ +0.000007] CPU0: Thermal monitoring enabled (TM1) | |
[ +0.000013] process: using mwait in idle threads | |
[ +0.000002] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 | |
[ +0.000000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 | |
[ +0.000001] Spectre V2 : Mitigation: Full generic retpoline | |
[ +0.000001] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch | |
[ +0.000000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier | |
[ +0.000000] Spectre V2 : Enabling Restricted Speculation for firmware calls | |
[ +0.000001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp | |
[ +0.000178] Freeing SMP alternatives memory: 28K | |
[ +0.001579] TSC deadline timer enabled | |
[ +0.000005] smpboot: CPU0: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xb) | |
[ +0.019259] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. | |
[ +0.000042] ... version: 4 | |
[ +0.000000] ... bit width: 48 | |
[ +0.000000] ... generic registers: 4 | |
[ +0.000001] ... value mask: 0000ffffffffffff | |
[ +0.000000] ... max period: 00007fffffffffff | |
[ +0.000000] ... fixed-purpose events: 3 | |
[ +0.000001] ... event mask: 000000070000000f | |
[ +0.006606] rcu: Hierarchical SRCU implementation. | |
[ +0.023444] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. | |
[ +0.006592] smp: Bringing up secondary CPUs ... | |
[ +0.040003] x86: Booting SMP configuration: | |
[ +0.000001] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 | |
[ +0.240320] smp: Brought up 1 node, 8 CPUs | |
[ +0.000000] smpboot: Max logical packages: 1 | |
[ +0.000000] smpboot: Total of 8 processors activated (31884.00 BogoMIPS) | |
[ +0.003171] devtmpfs: initialized | |
[ +0.000000] x86/mm: Memory block size: 128MB | |
[ +0.000257] PM: Registering ACPI NVS region [mem 0x4cb2a000-0x4cbdefff] (741376 bytes) | |
[ +0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns | |
[ +0.000000] futex hash table entries: 2048 (order: 5, 131072 bytes) | |
[ +0.000000] pinctrl core: initialized pinctrl subsystem | |
[ +0.000000] RTC time: 21:07:09, date: 11/29/18 | |
[ +0.000000] NET: Registered protocol family 16 | |
[ +0.000000] audit: initializing netlink subsys (disabled) | |
[ +0.000000] audit: type=2000 audit(1543525629.369:1): state=initialized audit_enabled=0 res=1 | |
[ +0.002911] cpuidle: using governor ladder | |
[ +0.000001] cpuidle: using governor menu | |
[ +0.000000] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it | |
[ +0.000000] ACPI: bus type PCI registered | |
[ +0.000000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | |
[ +0.000020] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) | |
[ +0.000001] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 | |
[ +0.000009] PCI: Using configuration type 1 for base access | |
[ +0.000547] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | |
[ +0.000000] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
[ +0.000000] ACPI: Added _OSI(Module Device) | |
[ +0.000000] ACPI: Added _OSI(Processor Device) | |
[ +0.000000] ACPI: Added _OSI(3.0 _SCP Extensions) | |
[ +0.000000] ACPI: Added _OSI(Processor Aggregator Device) | |
[ +0.000000] ACPI: Added _OSI(Linux-Dell-Video) | |
[ +0.000000] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) | |
[ +0.041730] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XDCI], AE_NOT_FOUND (20180810/dswload2-160) | |
[ +0.000008] fbcon: Taking over console | |
[ +0.000003] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Ignore error and continue table load (20180810/psobject-604) | |
[ +0.000003] ACPI Error: Skip parsing opcode Scope (20180810/psloop-543) | |
[ +0.000242] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.I2C1.TPL1], AE_NOT_FOUND (20180810/dswload2-160) | |
[ +0.000004] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Ignore error and continue table load (20180810/psobject-604) | |
[ +0.000002] ACPI Error: Skip parsing opcode Scope (20180810/psloop-543) | |
[ +0.000473] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.GPLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.TPLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.GUPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.TUPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000021] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.004433] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.001351] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.001352] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.001347] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.001350] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.001193] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.001347] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.001353] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.001350] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.001391] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR1._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR1._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR2._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR2._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000024] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000023] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000023] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000023] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000023] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000002] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000024] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000003] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20180810/dswload2-316) | |
[ +0.000003] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000002] ACPI Error: Skip parsing opcode Method (20180810/psloop-543) | |
[ +0.000069] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XDCI], AE_NOT_FOUND (20180810/dswload2-160) | |
[ +0.000003] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180810/psobject-221) | |
[ +0.000003] ACPI Error: Ignore error and continue table load (20180810/psobject-604) | |
[ +0.000002] ACPI Error: Skip parsing opcode Scope (20180810/psloop-543) | |
[ +0.001635] ACPI: 13 ACPI AML tables successfully acquired and loaded | |
[ +0.073052] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.I2C1.TPL1.TDX], AE_NOT_FOUND (20180810/psargs-330) | |
[ +0.000014] ACPI Error: Method parse/execution failed \_SB.PCI0.I2C1.INC1, AE_NOT_FOUND (20180810/psparse-516) | |
[ +0.000010] ACPI Error: Method parse/execution failed \_SB.PCI0.I2C1._INI, AE_NOT_FOUND (20180810/psparse-516) | |
[ +0.002195] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked | |
[ +0.002507] ACPI: Dynamic OEM Table Load: | |
[ +0.000000] ACPI: SSDT 0xFFFFA2E014C65800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) | |
[ +0.000000] ACPI: Dynamic OEM Table Load: | |
[ +0.000000] ACPI: SSDT 0xFFFFA2E01520C800 0005EB (v02 PmRef Cpu0Ist 00003000 INTL 20160527) | |
[ +0.000000] ACPI: Dynamic OEM Table Load: | |
[ +0.000000] ACPI: SSDT 0xFFFFA2E014D2DA00 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) | |
[ +0.000319] ACPI: Dynamic OEM Table Load: | |
[ +0.000007] ACPI: SSDT 0xFFFFA2E015208800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527) | |
[ +0.001447] ACPI: Dynamic OEM Table Load: | |
[ +0.000012] ACPI: SSDT 0xFFFFA2E014D32000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527) | |
[ +0.002200] ACPI: Dynamic OEM Table Load: | |
[ +0.000007] ACPI: SSDT 0xFFFFA2E014C60C00 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) | |
[ +0.000905] ACPI: Dynamic OEM Table Load: | |
[ +0.000006] ACPI: SSDT 0xFFFFA2E014C60800 00030A (v02 PmRef ApCst 00003000 INTL 20160527) | |
[ +0.006664] ACPI: EC: EC started | |
[ +0.000001] ACPI: EC: interrupt blocked | |
[ +0.016002] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC | |
[ +0.000001] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 | |
[ +0.000001] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions | |
[ +0.000001] ACPI: Interpreter enabled | |
[ +0.000036] ACPI: (supports S0 S4 S5) | |
[ +0.000001] ACPI: Using IOAPIC for interrupt routing | |
[ +0.000033] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug | |
[ +0.001173] ACPI: Enabled 8 GPEs in block 00 to 7F | |
[ +0.005131] ACPI: Power Resource [PXP] (on) | |
[ +0.009541] ACPI: Power Resource [BTPR] (off) | |
[ +0.001141] ACPI: Power Resource [PAUD] (on) | |
[ +0.002485] ACPI: Power Resource [V0PR] (on) | |
[ +0.000333] ACPI: Power Resource [V1PR] (on) | |
[ +0.000326] ACPI: Power Resource [V2PR] (on) | |
[ +0.002118] ACPI: Power Resource [PXTC] (off) | |
[ +0.001853] ACPI: Power Resource [WRST] (on) | |
[ +0.012011] ACPI: Power Resource [PIN] (off) | |
[ +0.000468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) | |
[ +0.000004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] | |
[ +0.001146] acpi PNP0A08:00: _OSC: platform does not support [AER] | |
[ +0.002121] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR] | |
[ +0.000001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration | |
[ +0.000895] PCI host bridge to bus 0000:00 | |
[ +0.000003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] | |
[ +0.000001] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] | |
[ +0.000001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] | |
[ +0.000000] pci_bus 0000:00: root bus resource [mem 0x5d000000-0xdfffffff window] | |
[ +0.000001] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] | |
[ +0.000001] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] | |
[ +0.000001] pci_bus 0000:00: root bus resource [bus 00-fe] | |
[ +0.000006] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000 | |
[ +0.000299] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000 | |
[ +0.000009] pci 0000:00:02.0: reg 0x10: [mem 0x604a000000-0x604affffff 64bit] | |
[ +0.000005] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] | |
[ +0.000003] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] | |
[ +0.000124] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 | |
[ +0.000011] pci 0000:00:04.0: reg 0x10: [mem 0x604b110000-0x604b117fff 64bit] | |
[ +0.000210] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000 | |
[ +0.000023] pci 0000:00:12.0: reg 0x10: [mem 0x604b129000-0x604b129fff 64bit] | |
[ +0.000179] pci 0000:00:13.0: [8086:9dfc] type 00 class 0x070000 | |
[ +0.000022] pci 0000:00:13.0: reg 0x10: [mem 0x604b122000-0x604b123fff 64bit] | |
[ +0.000057] pci 0000:00:13.0: PME# supported from D0 D3hot | |
[ +0.000141] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330 | |
[ +0.000017] pci 0000:00:14.0: reg 0x10: [mem 0x604b100000-0x604b10ffff 64bit] | |
[ +0.000053] pci 0000:00:14.0: PME# supported from D3hot D3cold | |
[ +0.000325] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000 | |
[ +0.000018] pci 0000:00:14.2: reg 0x10: [mem 0x604b120000-0x604b121fff 64bit] | |
[ +0.000010] pci 0000:00:14.2: reg 0x18: [mem 0x604b128000-0x604b128fff 64bit] | |
[ +0.000144] pci 0000:00:14.3: [8086:9df0] type 00 class 0x028000 | |
[ +0.000035] pci 0000:00:14.3: reg 0x10: [mem 0x604b11c000-0x604b11ffff 64bit] | |
[ +0.000092] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold | |
[ +0.000203] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000 | |
[ +0.000089] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] | |
[ +0.003788] pci 0000:00:15.1: [8086:9de9] type 00 class 0x0c8000 | |
[ +0.000087] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] | |
[ +0.000407] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000 | |
[ +0.000022] pci 0000:00:16.0: reg 0x10: [mem 0x604b125000-0x604b125fff 64bit] | |
[ +0.000070] pci 0000:00:16.0: PME# supported from D3hot | |
[ +0.000209] pci 0000:00:1c.0: [8086:9dba] type 01 class 0x060400 | |
[ +0.000076] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold | |
[ +0.000016] pci 0000:00:1c.0: PTM enabled (root), 4dns granularity | |
[ +0.000159] pci 0000:00:1c.4: [8086:9dbc] type 01 class 0x060400 | |
[ +0.000064] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold | |
[ +0.000013] pci 0000:00:1c.4: PTM enabled (root), 4dns granularity | |
[ +0.000157] pci 0000:00:1d.0: [8086:9db4] type 01 class 0x060400 | |
[ +0.000066] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold | |
[ +0.000014] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity | |
[ +0.000183] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100 | |
[ +0.000296] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040100 | |
[ +0.000039] pci 0000:00:1f.3: reg 0x10: [mem 0x604b118000-0x604b11bfff 64bit] | |
[ +0.000036] pci 0000:00:1f.3: reg 0x20: [mem 0x604b000000-0x604b0fffff 64bit] | |
[ +0.000075] pci 0000:00:1f.3: PME# supported from D3hot D3cold | |
[ +0.000575] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500 | |
[ +0.000020] pci 0000:00:1f.4: reg 0x10: [mem 0x604b124000-0x604b1240ff 64bit] | |
[ +0.000028] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] | |
[ +0.000143] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000 | |
[ +0.000015] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] | |
[ +0.000508] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000 | |
[ +0.000032] pci 0000:01:00.0: reg 0x14: [mem 0x8e300000-0x8e300fff] | |
[ +0.000104] pci 0000:01:00.0: supports D1 D2 | |
[ +0.000001] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold | |
[ +0.000238] pci 0000:00:1c.0: PCI bridge to [bus 01] | |
[ +0.000003] pci 0000:00:1c.0: bridge window [mem 0x8e300000-0x8e3fffff] | |
[ +0.000095] pci 0000:02:00.0: [8086:15d3] type 01 class 0x060400 | |
[ +0.000050] pci 0000:02:00.0: enabling Extended Tags | |
[ +0.000069] pci 0000:02:00.0: supports D1 D2 | |
[ +0.000001] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
[ +0.000108] pci 0000:00:1c.4: PCI bridge to [bus 02-6c] | |
[ +0.000003] pci 0000:00:1c.4: bridge window [mem 0x60000000-0x8e0fffff] | |
[ +0.000004] pci 0000:00:1c.4: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref] | |
[ +0.000053] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400 | |
[ +0.000054] pci 0000:03:00.0: enabling Extended Tags | |
[ +0.000072] pci 0000:03:00.0: supports D1 D2 | |
[ +0.000001] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
[ +0.000072] pci 0000:03:01.0: [8086:15d3] type 01 class 0x060400 | |
[ +0.000054] pci 0000:03:01.0: enabling Extended Tags | |
[ +0.000071] pci 0000:03:01.0: supports D1 D2 | |
[ +0.000001] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold | |
[ +0.000070] pci 0000:03:02.0: [8086:15d3] type 01 class 0x060400 | |
[ +0.000054] pci 0000:03:02.0: enabling Extended Tags | |
[ +0.000070] pci 0000:03:02.0: supports D1 D2 | |
[ +0.000000] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold | |
[ +0.000075] pci 0000:03:04.0: [8086:15d3] type 01 class 0x060400 | |
[ +0.000054] pci 0000:03:04.0: enabling Extended Tags | |
[ +0.000071] pci 0000:03:04.0: supports D1 D2 | |
[ +0.000000] pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold | |
[ +0.000088] pci 0000:02:00.0: PCI bridge to [bus 03-6c] | |
[ +0.000007] pci 0000:02:00.0: bridge window [mem 0x60000000-0x8e0fffff] | |
[ +0.000005] pci 0000:02:00.0: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref] | |
[ +0.000046] pci 0000:04:00.0: [8086:15d2] type 00 class 0x088000 | |
[ +0.000031] pci 0000:04:00.0: reg 0x10: [mem 0x8e000000-0x8e03ffff] | |
[ +0.000011] pci 0000:04:00.0: reg 0x14: [mem 0x8e040000-0x8e040fff] | |
[ +0.000057] pci 0000:04:00.0: enabling Extended Tags | |
[ +0.000088] pci 0000:04:00.0: supports D1 D2 | |
[ +0.000001] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
[ +0.000053] pci 0000:04:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:03:00.0 (capable of 31.504 Gb/s with 8 GT/s x4 link) | |
[ +0.000073] pci 0000:03:00.0: PCI bridge to [bus 04] | |
[ +0.000007] pci 0000:03:00.0: bridge window [mem 0x8e000000-0x8e0fffff] | |
[ +0.000039] pci 0000:03:01.0: PCI bridge to [bus 05-37] | |
[ +0.000008] pci 0000:03:01.0: bridge window [mem 0x60000000-0x77efffff] | |
[ +0.000005] pci 0000:03:01.0: bridge window [mem 0x6000000000-0x601fffffff 64bit pref] | |
[ +0.000057] pci 0000:38:00.0: [8086:15d4] type 00 class 0x0c0330 | |
[ +0.000033] pci 0000:38:00.0: reg 0x10: [mem 0x77f00000-0x77f0ffff] | |
[ +0.000073] pci 0000:38:00.0: enabling Extended Tags | |
[ +0.000093] pci 0000:38:00.0: supports D1 D2 | |
[ +0.000001] pci 0000:38:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
[ +0.000058] pci 0000:38:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link) | |
[ +0.000081] pci 0000:03:02.0: PCI bridge to [bus 38] | |
[ +0.000008] pci 0000:03:02.0: bridge window [mem 0x77f00000-0x77ffffff] | |
[ +0.000039] pci 0000:03:04.0: PCI bridge to [bus 39-6c] | |
[ +0.000007] pci 0000:03:04.0: bridge window [mem 0x78000000-0x8dffffff] | |
[ +0.000005] pci 0000:03:04.0: bridge window [mem 0x6020000000-0x6049ffffff 64bit pref] | |
[ +0.000118] pci 0000:6d:00.0: [1179:0116] type 00 class 0x010802 | |
[ +0.000026] pci 0000:6d:00.0: reg 0x10: [mem 0x8e200000-0x8e203fff 64bit] | |
[ +0.000190] pci 0000:00:1d.0: PCI bridge to [bus 6d] | |
[ +0.000004] pci 0000:00:1d.0: bridge window [mem 0x8e200000-0x8e2fffff] | |
[ +0.002252] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0 | |
[ +0.000067] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1 | |
[ +0.000064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0 | |
[ +0.000064] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0 | |
[ +0.000064] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 | |
[ +0.000064] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 | |
[ +0.000064] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 | |
[ +0.000063] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 | |
[ +0.009390] ACPI: EC: interrupt unblocked | |
[ +0.000042] ACPI: EC: event unblocked | |
[ +0.000021] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 | |
[ +0.000001] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events | |
[ +0.000054] pci 0000:00:02.0: vgaarb: setting as boot VGA device | |
[ +0.000000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none | |
[ +0.000000] pci 0000:00:02.0: vgaarb: bridge control possible | |
[ +0.000000] vgaarb: loaded | |
[ +0.000000] ACPI: bus type USB registered | |
[ +0.000000] usbcore: registered new interface driver usbfs | |
[ +0.000000] usbcore: registered new interface driver hub | |
[ +0.000000] usbcore: registered new device driver usb | |
[ +0.000000] pps_core: LinuxPPS API ver. 1 registered | |
[ +0.000000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ +0.000000] PTP clock support registered | |
[ +0.000000] EDAC MC: Ver: 3.0.0 | |
[ +0.000000] Registered efivars operations | |
[ +0.021450] PCI: Using ACPI for IRQ routing | |
[ +0.031121] PCI: pci_cache_line_size set to 64 bytes | |
[ +0.000429] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] | |
[ +0.000001] e820: reserve RAM buffer [mem 0x4b238000-0x4bffffff] | |
[ +0.000001] e820: reserve RAM buffer [mem 0x4fd10000-0x4fffffff] | |
[ +0.000000] e820: reserve RAM buffer [mem 0x29f000000-0x29fffffff] | |
[ +0.000054] NetLabel: Initializing | |
[ +0.000000] NetLabel: domain hash size = 128 | |
[ +0.000000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
[ +0.000009] NetLabel: unlabeled traffic allowed by default | |
[ +0.000002] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 | |
[ +0.000000] hpet0: 8 comparators, 64-bit 24.000000 MHz counter | |
[ +0.002579] clocksource: Switched to clocksource tsc-early | |
[ +0.005231] VFS: Disk quotas dquot_6.6.0 | |
[ +0.000012] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
[ +0.000040] pnp: PnP ACPI init | |
[ +0.000146] system 00:00: [io 0x0680-0x069f] has been reserved | |
[ +0.000001] system 00:00: [io 0x164e-0x164f] has been reserved | |
[ +0.000003] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ +0.000013] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) | |
[ +0.000070] system 00:02: [io 0x1854-0x1857] has been reserved | |
[ +0.000002] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) | |
[ +0.000018] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) | |
[ +0.000158] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved | |
[ +0.000001] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved | |
[ +0.000001] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved | |
[ +0.000001] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved | |
[ +0.000001] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved | |
[ +0.000001] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved | |
[ +0.000001] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved | |
[ +0.000000] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved | |
[ +0.000003] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ +0.000167] system 00:05: [io 0x1800-0x18fe] could not be reserved | |
[ +0.000001] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved | |
[ +0.000001] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved | |
[ +0.000001] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved | |
[ +0.000001] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved | |
[ +0.000001] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved | |
[ +0.000001] system 00:05: [mem 0xff000000-0xffffffff] has been reserved | |
[ +0.000002] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ +0.000221] system 00:06: [io 0x2000-0x20fe] has been reserved | |
[ +0.000003] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ +0.000789] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ +0.001551] pnp: PnP ACPI: found 8 devices | |
[ +0.005212] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns | |
[ +0.000024] pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-37] add_size 1000 | |
[ +0.000015] pci 0000:03:04.0: bridge window [io 0x1000-0x0fff] to [bus 39-6c] add_size 1000 | |
[ +0.000008] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-6c] add_size 2000 | |
[ +0.000005] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-6c] add_size 2000 | |
[ +0.000007] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit] | |
[ +0.000047] pci 0000:00:15.1: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit] | |
[ +0.000054] pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x5fff] | |
[ +0.000002] pci 0000:00:1c.0: PCI bridge to [bus 01] | |
[ +0.000003] pci 0000:00:1c.0: bridge window [mem 0x8e300000-0x8e3fffff] | |
[ +0.000005] pci 0000:02:00.0: BAR 13: assigned [io 0x4000-0x5fff] | |
[ +0.000001] pci 0000:03:01.0: BAR 13: assigned [io 0x4000-0x4fff] | |
[ +0.000001] pci 0000:03:04.0: BAR 13: assigned [io 0x5000-0x5fff] | |
[ +0.000001] pci 0000:03:00.0: PCI bridge to [bus 04] | |
[ +0.000004] pci 0000:03:00.0: bridge window [mem 0x8e000000-0x8e0fffff] | |
[ +0.000007] pci 0000:03:01.0: PCI bridge to [bus 05-37] | |
[ +0.000002] pci 0000:03:01.0: bridge window [io 0x4000-0x4fff] | |
[ +0.000004] pci 0000:03:01.0: bridge window [mem 0x60000000-0x77efffff] | |
[ +0.000003] pci 0000:03:01.0: bridge window [mem 0x6000000000-0x601fffffff 64bit pref] | |
[ +0.000005] pci 0000:03:02.0: PCI bridge to [bus 38] | |
[ +0.000004] pci 0000:03:02.0: bridge window [mem 0x77f00000-0x77ffffff] | |
[ +0.000008] pci 0000:03:04.0: PCI bridge to [bus 39-6c] | |
[ +0.000002] pci 0000:03:04.0: bridge window [io 0x5000-0x5fff] | |
[ +0.000004] pci 0000:03:04.0: bridge window [mem 0x78000000-0x8dffffff] | |
[ +0.000003] pci 0000:03:04.0: bridge window [mem 0x6020000000-0x6049ffffff 64bit pref] | |
[ +0.000005] pci 0000:02:00.0: PCI bridge to [bus 03-6c] | |
[ +0.000001] pci 0000:02:00.0: bridge window [io 0x4000-0x5fff] | |
[ +0.000004] pci 0000:02:00.0: bridge window [mem 0x60000000-0x8e0fffff] | |
[ +0.000003] pci 0000:02:00.0: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref] | |
[ +0.000005] pci 0000:00:1c.4: PCI bridge to [bus 02-6c] | |
[ +0.000002] pci 0000:00:1c.4: bridge window [io 0x4000-0x5fff] | |
[ +0.000002] pci 0000:00:1c.4: bridge window [mem 0x60000000-0x8e0fffff] | |
[ +0.000002] pci 0000:00:1c.4: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref] | |
[ +0.000003] pci 0000:00:1d.0: PCI bridge to [bus 6d] | |
[ +0.000003] pci 0000:00:1d.0: bridge window [mem 0x8e200000-0x8e2fffff] | |
[ +0.000005] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] | |
[ +0.000001] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] | |
[ +0.000001] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] | |
[ +0.000000] pci_bus 0000:00: resource 7 [mem 0x5d000000-0xdfffffff window] | |
[ +0.000001] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] | |
[ +0.000001] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window] | |
[ +0.000001] pci_bus 0000:01: resource 1 [mem 0x8e300000-0x8e3fffff] | |
[ +0.000001] pci_bus 0000:02: resource 0 [io 0x4000-0x5fff] | |
[ +0.000000] pci_bus 0000:02: resource 1 [mem 0x60000000-0x8e0fffff] | |
[ +0.000001] pci_bus 0000:02: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref] | |
[ +0.000001] pci_bus 0000:03: resource 0 [io 0x4000-0x5fff] | |
[ +0.000001] pci_bus 0000:03: resource 1 [mem 0x60000000-0x8e0fffff] | |
[ +0.000000] pci_bus 0000:03: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref] | |
[ +0.000001] pci_bus 0000:04: resource 1 [mem 0x8e000000-0x8e0fffff] | |
[ +0.000001] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] | |
[ +0.000001] pci_bus 0000:05: resource 1 [mem 0x60000000-0x77efffff] | |
[ +0.000001] pci_bus 0000:05: resource 2 [mem 0x6000000000-0x601fffffff 64bit pref] | |
[ +0.000000] pci_bus 0000:38: resource 1 [mem 0x77f00000-0x77ffffff] | |
[ +0.000001] pci_bus 0000:39: resource 0 [io 0x5000-0x5fff] | |
[ +0.000001] pci_bus 0000:39: resource 1 [mem 0x78000000-0x8dffffff] | |
[ +0.000001] pci_bus 0000:39: resource 2 [mem 0x6020000000-0x6049ffffff 64bit pref] | |
[ +0.000000] pci_bus 0000:6d: resource 1 [mem 0x8e200000-0x8e2fffff] | |
[ +0.000114] NET: Registered protocol family 2 | |
[ +0.000081] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) | |
[ +0.000018] TCP established hash table entries: 65536 (order: 7, 524288 bytes) | |
[ +0.000071] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) | |
[ +0.000115] TCP: Hash tables configured (established 65536 bind 65536) | |
[ +0.000022] UDP hash table entries: 4096 (order: 5, 131072 bytes) | |
[ +0.000018] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) | |
[ +0.000036] NET: Registered protocol family 1 | |
[ +0.000003] NET: Registered protocol family 44 | |
[ +0.000017] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] | |
[ +0.000530] PCI: CLS mismatch (64 != 128), using 64 bytes | |
[ +0.000080] pci 0000:02:00.0: enabling device (0006 -> 0007) | |
[ +0.000172] Unpacking initramfs... | |
[ +2.314518] Freeing initrd memory: 37124K | |
[ +0.000041] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) | |
[ +0.000002] software IO TLB: mapped [mem 0x43883000-0x47883000] (64MB) | |
[ +0.000020] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns | |
[ +0.000023] clocksource: Switched to clocksource tsc | |
[ +0.000102] Scanning for low memory corruption every 60 seconds | |
[ +0.000359] Initialise system trusted keyrings | |
[ +0.000007] Key type blacklist registered | |
[ +0.000034] workingset: timestamp_bits=41 max_order=21 bucket_order=0 | |
[ +0.000642] zbud: loaded | |
[ +0.000172] pstore: using zstd compression | |
[ +0.000586] Key type asymmetric registered | |
[ +0.000001] Asymmetric key parser 'x509' registered | |
[ +0.000004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) | |
[ +0.000023] io scheduler noop registered | |
[ +0.000000] io scheduler deadline registered | |
[ +0.000014] io scheduler cfq registered (default) | |
[ +0.000001] io scheduler mq-deadline registered | |
[ +0.000000] io scheduler kyber registered | |
[ +0.000012] io scheduler bfq registered | |
[ +0.000878] pcieport 0000:03:01.0: enabling device (0006 -> 0007) | |
[ +0.000213] pcieport 0000:03:04.0: enabling device (0006 -> 0007) | |
[ +0.000144] pcieport 0000:00:1c.0: Signaling PME with IRQ 122 | |
[ +0.000011] pcieport 0000:00:1c.4: Signaling PME with IRQ 123 | |
[ +0.000009] pcieport 0000:00:1d.0: Signaling PME with IRQ 124 | |
[ +0.000011] pciehp 0000:00:1c.4:pcie004: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ | |
[ +0.000031] pciehp 0000:03:01.0:pcie204: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ | |
[ +0.000029] pciehp 0000:03:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ | |
[ +0.000031] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
[ +0.000045] efifb: invalid framebuffer address | |
[ +0.000004] intel_idle: MWAIT substates: 0x11142120 | |
[ +0.000001] intel_idle: v0.4.1 model 0x8E | |
[ +0.000231] intel_idle: lapic_timer_reliable_states 0xffffffff | |
[ +0.000065] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 | |
[ +0.000004] ACPI: Lid Switch [LID0] | |
[ +0.000017] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 | |
[ +0.000003] ACPI: Power Button [PWRB] | |
[ +0.000021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 | |
[ +0.000006] ACPI: Power Button [PWRF] | |
[ +0.007333] thermal LNXTHERM:00: registered as thermal_zone0 | |
[ +0.000001] ACPI: Thermal Zone [TZ01] (70 C) | |
[ +0.000277] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ +0.000566] serial 0000:00:13.0: enabling device (0000 -> 0002) | |
[ +0.001541] nvme nvme0: pci function 0000:6d:00.0 | |
[ +0.000017] usbcore: registered new interface driver usbserial_generic | |
[ +0.000003] usbserial: USB Serial support registered for generic | |
[ +0.000016] rtc_cmos 00:01: RTC can wake from S4 | |
[ +0.001096] rtc_cmos 00:01: registered as rtc0 | |
[ +0.000020] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram | |
[ +0.000031] intel_pstate: Intel P-state driver initializing | |
[ +0.000681] intel_pstate: HWP enabled | |
[ +0.000077] ledtrig-cpu: registered to indicate activity on CPUs | |
[ +0.000019] intel_pmc_core: initialized | |
[ +0.000132] NET: Registered protocol family 10 | |
[ +0.002533] Segment Routing with IPv6 | |
[ +0.000012] NET: Registered protocol family 17 | |
[ +0.000613] RAS: Correctable Errors collector initialized. | |
[ +0.000048] microcode: sig=0x806eb, pf=0x80, revision=0x98 | |
[ +0.000193] microcode: Microcode Update Driver: v2.2. | |
[ +0.000006] sched_clock: Marking stable (3140572402, -2714768)->(3145939148, -8081514) | |
[ +0.000226] registered taskstats version 1 | |
[ +0.000004] Loading compiled-in X.509 certificates | |
[ +0.001103] Loaded X.509 cert 'Build time autogenerated kernel key: d24dd2646acfd3dc1dfbac003e2c7dc429e13dc1' | |
[ +0.000014] zswap: loaded using pool lzo/zbud | |
[ +0.001453] Key type big_key registered | |
[ +0.001658] Magic number: 10:504:147 | |
[ +0.000021] pci 0000:00:14.0: hash matches | |
[ +0.000021] acpi device:18: hash matches | |
[ +0.000217] rtc_cmos 00:01: setting system clock to 2018-11-29 21:07:12 UTC (1543525632) | |
[ +0.214910] nvme0n1: p1 p2 p3 p4 | |
[ +0.004050] Freeing unused decrypted memory: 2040K | |
[ +0.001392] Freeing unused kernel image memory: 1532K | |
[ +0.000003] Write protecting the kernel read-only data: 18432k | |
[ +0.001067] Freeing unused kernel image memory: 2008K | |
[ +0.000094] Freeing unused kernel image memory: 456K | |
[ +0.005737] x86/mm: Checked W+X mappings: passed, no W+X pages found. | |
[ +0.000003] Run /init as init process | |
[ +0.061011] loop: module loaded | |
[ +0.039375] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 | |
[ +0.000001] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp | |
[ +0.003640] serio: i8042 KBD port at 0x60,0x64 irq 1 | |
[ +0.000322] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) | |
[ +0.000144] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) | |
[ +0.003032] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) | |
[ +0.002810] thunderbolt 0000:04:00.0: NHI initialized, starting thunderbolt | |
[ +0.000004] thunderbolt 0000:04:00.0: allocating TX ring 0 of size 10 | |
[ +0.000016] thunderbolt 0000:04:00.0: allocating RX ring 0 of size 10 | |
[ +0.000014] thunderbolt 0000:04:00.0: control channel created | |
[ +0.000001] thunderbolt 0000:04:00.0: control channel starting... | |
[ +0.000002] thunderbolt 0000:04:00.0: starting TX ring 0 | |
[ +0.000008] thunderbolt 0000:04:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1) | |
[ +0.000002] thunderbolt 0000:04:00.0: starting RX ring 0 | |
[ +0.000007] thunderbolt 0000:04:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001) | |
[ +0.002307] cryptd: max_cpu_qlen set to 1000 | |
[ +0.000008] Linux agpgart interface v0.103 | |
[ +0.001614] xhci_hcd 0000:00:14.0: xHCI Host Controller | |
[ +0.000007] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 | |
[ +0.001077] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 | |
[ +0.000005] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported | |
[ +0.000200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 | |
[ +0.000002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ +0.000002] usb usb1: Product: xHCI Host Controller | |
[ +0.000001] usb usb1: Manufacturer: Linux 4.19.4-arch1-1-ARCH xhci-hcd | |
[ +0.000002] usb usb1: SerialNumber: 0000:00:14.0 | |
[ +0.000139] hub 1-0:1.0: USB hub found | |
[ +0.000016] hub 1-0:1.0: 12 ports detected | |
[ +0.002404] xhci_hcd 0000:00:14.0: xHCI Host Controller | |
[ +0.000004] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 | |
[ +0.000004] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed | |
[ +0.000048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 | |
[ +0.000002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ +0.000001] usb usb2: Product: xHCI Host Controller | |
[ +0.000005] usb usb2: Manufacturer: Linux 4.19.4-arch1-1-ARCH xhci-hcd | |
[ +0.000001] usb usb2: SerialNumber: 0000:00:14.0 | |
[ +0.000124] hub 2-0:1.0: USB hub found | |
[ +0.000014] hub 2-0:1.0: 6 ports detected | |
[ +0.000392] usb: port power management may be unreliable | |
[ +0.000598] xhci_hcd 0000:38:00.0: xHCI Host Controller | |
[ +0.000006] xhci_hcd 0000:38:00.0: new USB bus registered, assigned bus number 3 | |
[ +0.001130] xhci_hcd 0000:38:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 | |
[ +0.000205] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 | |
[ +0.000002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ +0.000002] usb usb3: Product: xHCI Host Controller | |
[ +0.000001] usb usb3: Manufacturer: Linux 4.19.4-arch1-1-ARCH xhci-hcd | |
[ +0.000002] usb usb3: SerialNumber: 0000:38:00.0 | |
[ +0.000107] hub 3-0:1.0: USB hub found | |
[ +0.000010] hub 3-0:1.0: 2 ports detected | |
[ +0.000541] xhci_hcd 0000:38:00.0: xHCI Host Controller | |
[ +0.000004] xhci_hcd 0000:38:00.0: new USB bus registered, assigned bus number 4 | |
[ +0.000003] xhci_hcd 0000:38:00.0: Host supports USB 3.1 Enhanced SuperSpeed | |
[ +0.000038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 | |
[ +0.000002] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ +0.000002] usb usb4: Product: xHCI Host Controller | |
[ +0.000001] usb usb4: Manufacturer: Linux 4.19.4-arch1-1-ARCH xhci-hcd | |
[ +0.000002] usb usb4: SerialNumber: 0000:38:00.0 | |
[ +0.000117] hub 4-0:1.0: USB hub found | |
[ +0.000013] hub 4-0:1.0: 2 ports detected | |
[ +0.014118] AVX2 version of gcm_enc/dec engaged. | |
[ +0.000000] AES CTR mode by8 optimization enabled | |
[ +0.032414] VFIO - User Level meta-driver version: 0.3 | |
[ +0.031604] thunderbolt 0000:04:00.0: current switch config: | |
[ +0.000002] thunderbolt 0000:04:00.0: Switch: 8086:15d3 (Revision: 6, TB Version: 2) | |
[ +0.000000] thunderbolt 0000:04:00.0: Max Port Number: 11 | |
[ +0.000001] thunderbolt 0000:04:00.0: Config: | |
[ +0.000001] thunderbolt 0000:04:00.0: Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms | |
[ +0.000001] thunderbolt 0000:04:00.0: unknown1: 0x0 unknown4: 0x0 | |
[ +0.009264] [drm] Replacing VGA console driver | |
[ +0.001344] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
[ +0.000000] [drm] Driver supports precise vblank timestamp query. | |
[ +0.000750] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem | |
[ +0.000509] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) | |
[ +0.001314] random: fast init done | |
[ +0.003249] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 | |
[ +0.026734] thunderbolt 0000:04:00.0: 0: uid: 0xf06a0024698600 | |
[ +0.001408] thunderbolt 0000:04:00.0: Port 0: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 7/7 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 8 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x800000 | |
[ +0.000508] thunderbolt 0000:04:00.0: Port 1: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 15/15 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 16 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x3c00000 | |
[ +0.000509] thunderbolt 0000:04:00.0: Port 2: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 15/15 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 16 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x3c00000 | |
[ +0.000515] thunderbolt 0000:04:00.0: Port 3: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 15/15 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 16 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x3c00000 | |
[ +0.000503] thunderbolt 0000:04:00.0: Port 4: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 15/15 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 16 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x3c00000 | |
[ +0.000001] thunderbolt 0000:04:00.0: 0:5: disabled by eeprom | |
[ +0.000124] thunderbolt 0000:04:00.0: Port 6: 8086:15d3 (Revision: 6, TB Version: 1, Type: PCIe (0x100101)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 8/8 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x800000 | |
[ +0.000125] thunderbolt 0000:04:00.0: Port 7: 8086:15d3 (Revision: 6, TB Version: 1, Type: PCIe (0x100101)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 8/8 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x800000 | |
[ +0.000125] thunderbolt 0000:04:00.0: Port 8: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 9/9 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x800000 | |
[ +0.000125] thunderbolt 0000:04:00.0: Port 9: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0101)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 9/9 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x1000000 | |
[ +0.000125] thunderbolt 0000:04:00.0: Port 10: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0101)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 9/9 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x1000000 | |
[ +0.000125] thunderbolt 0000:04:00.0: Port 11: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102)) | |
[ +0.000001] thunderbolt 0000:04:00.0: Max hop id (in/out): 9/9 | |
[ +0.000001] thunderbolt 0000:04:00.0: Max counters: 2 | |
[ +0.000001] thunderbolt 0000:04:00.0: NFC Credits: 0x800000 | |
[ +0.197856] usb 1-5: new high-speed USB device number 2 using xhci_hcd | |
[ +0.209814] usb 1-5: New USB device found, idVendor=0408, idProduct=5251, bcdDevice= 0.04 | |
[ +0.000002] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ +0.000001] usb 1-5: Product: HP Wide Vision FHD Camera | |
[ +0.000001] usb 1-5: Manufacturer: SunplusIT Inc | |
[ +0.000001] usb 1-5: SerialNumber: 01.00.00 | |
[ +0.063536] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd | |
[ +0.017190] usb 2-1: New USB device found, idVendor=1b1c, idProduct=1a0e, bcdDevice= 1.00 | |
[ +0.000002] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 | |
[ +0.000001] usb 2-1: Product: Voyager GTX | |
[ +0.000001] usb 2-1: Manufacturer: Corsair | |
[ +0.000001] usb 2-1: SerialNumber: 511160602187700015 | |
[ +0.006838] SCSI subsystem initialized | |
[ +0.001973] usbcore: registered new interface driver usb-storage | |
[ +0.002899] scsi host0: uas | |
[ +0.000087] usbcore: registered new interface driver uas | |
[ +0.000322] scsi 0:0:0:0: Direct-Access Corsair Voyager GTX 0 PQ: 0 ANSI: 6 | |
[ +0.002925] sd 0:0:0:0: [sda] 450106372 512-byte logical blocks: (230 GB/215 GiB) | |
[ +0.000075] sd 0:0:0:0: [sda] Write Protect is off | |
[ +0.000001] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 | |
[ +0.000169] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
[ +0.002807] sda: sda1 sda2 sda3 sda4 sda5 | |
[ +0.000868] sd 0:0:0:0: [sda] Attached SCSI disk | |
[ +0.004617] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 | |
[ +0.001718] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) | |
[ +0.000324] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 | |
[ +0.001890] fbcon: inteldrmfb (fb0) is primary device | |
[ +0.095356] usb 1-9: new full-speed USB device number 3 using xhci_hcd | |
[ +0.141991] usb 1-9: New USB device found, idVendor=06cb, idProduct=00bb, bcdDevice= 1.64 | |
[ +0.000004] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1 | |
[ +0.000004] usb 1-9: SerialNumber: 728ba40777a1 | |
[ +0.124675] usb 1-10: new full-speed USB device number 4 using xhci_hcd | |
[ +0.142991] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02 | |
[ +0.000005] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ +0.584705] Console: switching to colour frame buffer device 240x67 | |
[ +0.015013] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device | |
[ +0.082355] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) | |
[ +0.075670] ISO 9660 Extensions: RRIP_1991A | |
[ +0.067638] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ +0.029759] overlayfs: fs on '/run/archiso/sfs/airootfs' does not support file handles, falling back to index=off,nfs_export=off. | |
[ +0.402173] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) | |
[ +0.016589] systemd[1]: Detected architecture x86-64. | |
[ +0.008992] systemd[1]: Set hostname to <archiso>. | |
[ +0.000501] random: systemd: uninitialized urandom read (16 bytes read) | |
[ +0.000003] systemd[1]: Initializing machine ID from random generator. | |
[ +0.182009] random: systemd: uninitialized urandom read (16 bytes read) | |
[ +0.002820] systemd[1]: Listening on Process Core Dump Socket. | |
[ +0.000101] random: systemd: uninitialized urandom read (16 bytes read) | |
[ +0.001523] systemd[1]: Listening on LVM2 metadata daemon socket. | |
[ +0.000686] systemd[1]: Listening on udev Control Socket. | |
[ +0.001131] systemd[1]: Listening on LVM2 poll daemon socket. | |
[ +0.000776] systemd[1]: Created slice User and Session Slice. | |
[ +0.000068] systemd[1]: Reached target Slices. | |
[ +0.036993] audit: type=1130 audit(1543525635.500:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.002819] audit: type=1130 audit(1543525635.503:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.002319] audit: type=1130 audit(1543525635.506:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.018402] audit: type=1130 audit(1543525635.523:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.004743] audit: type=1130 audit(1543525635.530:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.001714] audit: type=1130 audit(1543525635.530:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.014391] audit: type=1130 audit(1543525635.546:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.005704] audit: type=1130 audit(1543525635.550:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.004776] systemd-journald[339]: Received request to flush runtime journal from PID 1 | |
[ +0.016554] audit: type=1130 audit(1543525635.573:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.001998] audit: type=1130 audit(1543525635.573:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.071933] ACPI: AC Adapter [ADP1] (off-line) | |
[ +0.003789] input: HP Wireless hotkeys as /devices/virtual/input/input5 | |
[ +0.010902] input: Intel HID events as /devices/platform/INT33D5:00/input/input6 | |
[ +0.000100] intel-hid INT33D5:00: platform supports 5 button array | |
[ +0.000026] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input7 | |
[ +0.039593] i801_smbus 0000:00:1f.4: SPD Write Disable is set | |
[ +0.000081] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt | |
[ +0.029822] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) | |
[ +0.001225] mei_me 0000:00:16.0: enabling device (0000 -> 0002) | |
[ +0.046786] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
[ +0.018408] battery: ACPI: Battery Slot [BAT0] (battery present) | |
[ +0.001724] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
[ +0.005134] hidraw: raw HID events driver (C) Jiri Kosina | |
[ +0.011096] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 16) | |
[ +0.009907] input: PC Speaker as /devices/platform/pcspkr/input/input8 | |
[ +0.027514] media: Linux media interface: v0.10 | |
[ +0.001324] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201) | |
[ +0.001655] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516) | |
[ +0.001614] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516) | |
[ +0.001851] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer | |
[ +0.000002] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules | |
[ +0.000001] RAPL PMU: hw unit of domain package 2^-14 Joules | |
[ +0.000001] RAPL PMU: hw unit of domain dram 2^-14 Joules | |
[ +0.000001] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules | |
[ +0.000001] RAPL PMU: hw unit of domain psys 2^-14 Joules | |
[ +0.000219] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201) | |
[ +0.007689] Intel(R) Wireless WiFi driver for Linux | |
[ +0.000001] Copyright(c) 2003- 2015 Intel Corporation | |
[ +0.000062] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) | |
[ +0.004285] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516) | |
[ +0.021814] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516) | |
[ +0.002731] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201) | |
[ +0.002384] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516) | |
[ +0.003668] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516) | |
[ +0.001854] input: HP WMI hotkeys as /devices/virtual/input/input9 | |
[ +0.000235] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201) | |
[ +0.001776] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516) | |
[ +0.001645] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516) | |
[ +0.000046] videodev: Linux video capture interface: v2.00 | |
[ +0.000104] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) | |
[ +0.000238] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) | |
[ +0.001484] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201) | |
[ +0.001755] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516) | |
[ +0.001923] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516) | |
[ +0.009117] Bluetooth: Core ver 2.22 | |
[ +0.000014] NET: Registered protocol family 31 | |
[ +0.000001] Bluetooth: HCI device and connection manager initialized | |
[ +0.000004] Bluetooth: HCI socket layer initialized | |
[ +0.000002] Bluetooth: L2CAP socket layer initialized | |
[ +0.000005] Bluetooth: SCO socket layer initialized | |
[ +0.009397] iTCO_vendor_support: vendor-support=0 | |
[ +0.023498] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 | |
[ +0.001246] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC285: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker | |
[ +0.000003] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) | |
[ +0.000002] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) | |
[ +0.000002] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 | |
[ +0.000001] snd_hda_codec_realtek hdaudioC0D0: inputs: | |
[ +0.000002] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 | |
[ +0.009004] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff] | |
[ +0.001960] iTCO_wdt: probe of iTCO_wdt failed with error -16 | |
[ +0.019560] usbcore: registered new interface driver btusb | |
[ +0.023510] kvm: disabled by bios | |
[ +0.002144] Bluetooth: hci0: Firmware revision 0.1 build 113 week 38 2018 | |
[ +0.016559] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 | |
[ +0.000059] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 | |
[ +0.000043] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 | |
[ +0.000037] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 | |
[ +0.000035] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 | |
[ +0.000033] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 | |
[ +0.000034] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 | |
[ +0.002597] uvcvideo: Found UVC 1.50 device HP Wide Vision FHD Camera (0408:5251) | |
[ +0.047998] random: crng init done | |
[ +0.000002] random: 7 urandom warning(s) missed due to ratelimiting | |
[ +0.013899] iwlwifi 0000:00:14.3: loaded firmware version 38.755cfdd8.0 op_mode iwlmvm | |
[ +0.018567] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized! | |
[ +0.000003] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized! | |
[ +0.000002] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized! | |
[ +0.000002] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized! | |
[ +0.000072] input: HP Wide Vision FHD Camera: HP W as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input17 | |
[ +0.003954] uvcvideo: Found UVC 1.50 device HP Wide Vision FHD Camera (0408:5251) | |
[ +0.001745] intel_rapl: Found RAPL domain package | |
[ +0.000002] intel_rapl: Found RAPL domain core | |
[ +0.000001] intel_rapl: Found RAPL domain uncore | |
[ +0.000002] intel_rapl: Found RAPL domain dram | |
[ +0.015742] uvcvideo: Unable to create debugfs 1-2 directory. | |
[ +0.000097] uvcvideo 1-5:1.2: Entity type for entity Extension 4 was not initialized! | |
[ +0.000002] uvcvideo 1-5:1.2: Entity type for entity Extension 7 was not initialized! | |
[ +0.000002] uvcvideo 1-5:1.2: Entity type for entity Processing 2 was not initialized! | |
[ +0.000002] uvcvideo 1-5:1.2: Entity type for entity Camera 1 was not initialized! | |
[ +0.000076] input: HP Wide Vision FHD Camera: HP I as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input18 | |
[ +0.000078] usbcore: registered new interface driver uvcvideo | |
[ +0.000000] USB Video Class driver (1.1.1) | |
[ +0.083221] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318 | |
[ +0.011177] wl: loading out-of-tree module taints kernel. | |
[ +0.000003] wl: module license 'MIXED/Proprietary' taints kernel. | |
[ +0.000000] Disabling lock debugging due to kernel taint | |
[ +0.001158] wl: module verification failed: signature and/or required key missing - tainting kernel | |
[ +0.037371] iwlwifi 0000:00:14.3: base HW address: dc:8b:28:7f:43:d8 | |
[ +0.070731] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' | |
[ +0.000232] thermal thermal_zone7: failed to read out thermal zone (-61) | |
[ +0.002896] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0 | |
[ +0.055012] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=4 | |
[ +0.237356] hid-generic 001F:8086:22D8.0001: hidraw0: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:22D8] on | |
[ +0.002482] hid-generic 001F:8086:22D8.0002: hidraw1: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:22D8] on | |
[ +0.001857] hid-generic 001F:8086:22D8.0003: hidraw2: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:22D8] on | |
[ +0.000726] hid-generic 001F:8086:22D8.0004: hidraw3: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:22D8] on | |
[ +4.416915] ucsi_acpi USBC000:00: PPM NOT RESPONDING | |
[ +0.027236] ucsi_acpi USBC000:00: PPM init failed (-110) | |
[ +0.256814] kauditd_printk_skb: 17 callbacks suppressed | |
[ +0.000001] audit: type=1131 audit(1543525641.340:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +2.179103] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1) | |
[ +0.000000] CPU6: Core temperature above threshold, cpu clock throttled (total events = 1) | |
[ +0.000002] CPU6: Package temperature above threshold, cpu clock throttled (total events = 1) | |
[ +0.000042] CPU4: Package temperature above threshold, cpu clock throttled (total events = 1) | |
[ +0.000001] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) | |
[ +0.000000] CPU5: Package temperature above threshold, cpu clock throttled (total events = 1) | |
[ +0.000001] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) | |
[ +0.000001] CPU7: Package temperature above threshold, cpu clock throttled (total events = 1) | |
[ +0.000001] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) | |
[ +0.000980] CPU1: Package temperature/speed normal | |
[ +0.000000] CPU4: Package temperature/speed normal | |
[ +0.000001] CPU5: Package temperature/speed normal | |
[ +0.000001] CPU0: Package temperature/speed normal | |
[ +0.000000] CPU7: Package temperature/speed normal | |
[ +0.000001] CPU3: Package temperature/speed normal | |
[ +0.000063] CPU2: Core temperature/speed normal | |
[ +0.000968] CPU6: Core temperature/speed normal | |
[ +0.655045] audit: type=1006 audit(1543525644.176:30): pid=483 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1 | |
[ +0.016146] audit: type=1130 audit(1543525644.190:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.006965] audit: type=1006 audit(1543525644.200:32): pid=682 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1 | |
[ +0.046216] audit: type=1130 audit(1543525644.243:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.157861] audit: type=1130 audit(1543525644.403:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pacman-init comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +3.571273] thunderbolt 0000:04:00.0: stopping RX ring 0 | |
[ +0.000006] thunderbolt 0000:04:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1) | |
[ +0.000006] thunderbolt 0000:04:00.0: stopping TX ring 0 | |
[ +0.000005] thunderbolt 0000:04:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0) | |
[ +0.000003] thunderbolt 0000:04:00.0: control channel stopped | |
[Nov29 21:11] NET: Registered protocol family 3 | |
[ +0.238164] IPv6: ADDRCONF(NETDEV_UP): wlp0s20f3: link is not ready | |
[ +51.729459] IPv6: ADDRCONF(NETDEV_UP): wlp0s20f3: link is not ready | |
[ +0.293056] IPv6: ADDRCONF(NETDEV_UP): wlp0s20f3: link is not ready | |
[Nov29 21:12] wlp0s20f3: authenticate with c6:fb:5e:96:79:5e | |
[ +0.029352] wlp0s20f3: send auth to c6:fb:5e:96:79:5e (try 1/3) | |
[ +0.038133] wlp0s20f3: authenticated | |
[ +0.002001] wlp0s20f3: associate with c6:fb:5e:96:79:5e (try 1/3) | |
[ +0.003032] wlp0s20f3: RX AssocResp from c6:fb:5e:96:79:5e (capab=0x511 status=0 aid=27) | |
[ +0.003493] wlp0s20f3: associated | |
[ +0.008899] wlp0s20f3: Limiting TX power to 23 (23 - 0) dBm as advertised by c6:fb:5e:96:79:5e | |
[ +0.146079] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready | |
[ +0.576097] 8021q: 802.1Q VLAN Support v1.8 | |
[ +17.649070] EXT4-fs (sda4): error count since last fsck: 8 | |
[ +0.000034] EXT4-fs (sda4): initial error at time 1542448498: ext4_ext_remove_space:2989: inode 891 | |
[ +0.000022] EXT4-fs (sda4): last error at time 1542448498: ext4_evict_inode:293: inode 892 | |
[Nov29 21:15] audit: type=1131 audit(1543526132.336:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.000553] audit: type=1130 audit(1543526132.336:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.000002] audit: type=1131 audit(1543526132.336:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.000517] audit: type=1130 audit(1543526132.336:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.017576] audit: type=1006 audit(1543526132.353:39): pid=1289 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=3 res=1 | |
[Nov29 21:22] audit: type=1130 audit(1543526535.906:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
[ +0.000005] audit: type=1131 audit(1543526535.906:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment