docker.settings.gei.large.yaml

---
# A list of global configuration variables
# Uncomment lines as needed to edit default settings.
# Note this only works for settings with default values. Some commands like --rerun <module>
# or --force-ccd n will have to be set in the command line (if you need to)

# This line is really important to set up properly
project_path: '/'

# The rest of the settings will default to the values set unless you uncomment and change them
#resize_to: 2400
resize_to: 2000
#start_with: 'resize'
#end_with: 'odm_orthophoto'
#rerun_all: False
#zip_results: False
#verbose: False
verbose: True
#time: False
time: True
# opensfm_processes defaults to nproc --> often causes run errors
#opensfm_processes: 1 # small instance
#opensfm_processes: 32 # 32/32 cores - got out of memory error with July/2017 Docker build, works with Aug/2017 build
#opensfm_processes: 10
#min_num_features: 4000 #default
min_num_features: 15000
#matcher_threshold: 2.0 # zombie code, does nothing
#matcher_ratio: 0.6
#matcher_neighbors: 8
matcher_neighbors: 12
#matcher_distance: 0
matcher_distance: 250
#use_pmvs: False # The cmvs/pmvs settings only matter if 'Enabled' is set to True
#cmvs_maximages: 500
#pmvs_level: 1
#pmvs_csize: 2
#pmvs_threshold: 0.7
#pmvs_wsize: 7
#pmvs_min_images: 3
#pmvs_num_cores: 4 # by default this is set to $(nproc)
#mesh_size: 100000
mesh_size: 30000
#mesh_octree_depth: 9 #default - when pulls images off
mesh_octree_depth: 5
#mesh_samples: 1.0
#mesh_solver_divide: 9
mesh_solver_divide: 6
mesh_remove_outliers: 3
#texturing_data_term: 'gmi'
#texturing_outlier_removal_type: 'gauss_clamping'
#texturing_skip_visibility_test: False
#texturing_skip_global_seam_leveling: False
#texturing_skip_local_seam_leveling: False
#texturing_skip_hole_filling: False
#texturing_keep_unseen_faces: False #default
#texturing_keep_unseen_faces: True #? adds shelf to mesh around textured section
#texturing_tone_mapping: 'none'
#gcp: !!null  # YAML tag for None
#use_exif: False # Set to True if you have a GCP file (it auto-detects) and want to use EXIF
use_exif: True
#dtm: False      # Use this tag to build a DTM (Digital Terrain Model
#dsm: False      # Use this tag to build a DSM (Digital Surface Model
#dem-gapfill-steps: 4
#dem-resolution: 0.1
#dem-maxangle:20
#dem-maxsd: 2.5
#dem-approximate: False
#dem-decimation: 1
dem-terrain-type: ComplexForest
#orthophoto_resolution: 20.0 # default Pixels/meter 20.0px/m = 5.0cm/px
orthophoto_resolution: 30.0
#orthophoto_target_srs: !!null # Currently does nothing
#orthophoto_no_tiled: False
orthophoto_no_tiled: True
#orthophoto_compression: DEFLATE # Options are [JPEG, LZW, PACKBITS, DEFLATE, LZMA, NONE] Don't change unless you know what you are doing