gistfile1.txt

[  457.041601] pci_bus 0000:01: Allocating resources
[  457.041650] pcieport 0000:00:01.5: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[  457.041654] pcieport 0000:00:01.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[  457.041666] pci_bus 0000:02: Allocating resources
[  457.041724] pci_bus 0000:03: Allocating resources
[  457.041741] pcieport 0000:00:01.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[  457.041756] pcieport 0000:00:01.5: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[  457.041762] pcieport 0000:00:01.7: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[  457.041771] pcieport 0000:00:01.5: BAR 13: assigned [io  0x2000-0x2fff]
[  545.207622] usb 2-3: Device not responding to setup address.
[  545.415475] usb 2-3: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[  545.440010] usb 2-3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[  545.440013] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[  545.440015] usb 2-3: Product: USB 10/100/1000 LAN
[  545.440017] usb 2-3: Manufacturer: Realtek
[  545.440019] usb 2-3: SerialNumber: 000002
[  545.633506] usb 2-3: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[  545.716097] r8152 2-3:1.0 eth0: v1.09.9
[  545.738360] r8152 2-3:1.0 enx00e15c0000ef: renamed from eth0
[  545.773698] IPv6: ADDRCONF(NETDEV_UP): enx00e15c0000ef: link is not ready
[  545.778613] IPv6: ADDRCONF(NETDEV_UP): enx00e15c0000ef: link is not ready
[  545.982211] CIPCServer::Thr[2752]: segfault at 1c ip 00000000ef06d066 sp 00000000e5cfec40 error 4 in libnm-glib.so.4.3.0[ef04c000+37000]
[  545.982219] Code: 00 00 00 00 57 89 d7 56 89 c6 53 e8 0b 83 fe ff 81 c3 a8 6f 01 00 83 ec 10 e8 b6 71 fe ff 89 34 24 89 44 24 04 e8 6a 7a fe ff <8b> 50 1c 31 c0 85 d2 74 11 90 8b 02 39 78 0c 74 09 8b 52 04 85 d2