Skip to content

Instantly share code, notes, and snippets.

@Phoul Phoul/prosody.cfg.lua Secret
Last active Dec 29, 2015

Embed
What would you like to do?
Prosody_Configuration
-- Prosody XMPP Server Configuration
--
-- Information on configuring Prosody can be found on our
-- website at http://prosody.im/doc/configure
--
-- Tip: You can check that the syntax of this file is correct
-- when you have finished by running: luac -p prosody.cfg.lua
-- If there are any errors, it will let you know what and where
-- they are, otherwise it will keep quiet.
--
-- Good luck, and happy Jabbering!
---------- Server-wide settings ----------
-- Settings in this section apply to the whole server and are the default settings
-- for any virtual hosts
-- This is a (by default, empty) list of accounts that are admins
-- for the server. Note that you must create the accounts separately
-- (see http://prosody.im/doc/creating_accounts for info)
-- Example: admins = { "user1@example.com", "user2@example.net" }
admins = { "phoul@auth-xmpp.torproject.org", "lunar@auth-xmpp.torproject.org", "helix@auth-xmpp.torproject.org" }
-- Enable use of libevent for better performance under high load
-- For more information see: http://prosody.im/doc/libevent
--use_libevent = true;
-- This is the list of modules Prosody will load on startup.
-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
-- Documentation on modules can be found at: http://prosody.im/doc/modules
modules_enabled = {
-- Generally required
"roster"; -- Allow users to have a roster. Recommended ;)
"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
"tls"; -- Add support for secure TLS on c2s/s2s connections
"dialback"; -- s2s dialback support
"disco"; -- Service discovery
"posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
-- Not essential, but recommended
"private"; -- Private XML storage (for room bookmarks, etc.)
"vcard"; -- Allow users to set vCards
-- These are commented by default as they have a performance impact
--"privacy"; -- Support privacy lists
--"compression"; -- Stream compression (requires the lua-zlib package installed)
-- Nice to have
--"version"; -- Replies to server version requests
--"uptime"; -- Report how long server has been running
--"time"; -- Let others know the time here on this server
"ping"; -- Replies to XMPP pings with pongs
--"pep"; -- Enables users to publish their mood, activity, playing music and more
--"register"; -- Allow users to register on this server using a client and change passwords
-- Admin interfaces
--"admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
--"admin_telnet"; -- Opens telnet console interface on localhost port 5582
-- HTTP modules
"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
--"http_files"; -- Serve static files from a directory over HTTP
-- Other specific functionality
--"groups"; -- Shared roster support
--"announce"; -- Send announcement to all online users
--"welcome"; -- Welcome users who register accounts
--"watchregistrations"; -- Alert admins of registrations
--"motd"; -- Send a message to users when they log in
--"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
};
-- These modules are auto-loaded, but should you want
-- to disable them then uncomment them here:
modules_disabled = {
-- "offline"; -- Store offline messages
-- "c2s"; -- Handle client connections
"s2s"; -- Handle server-to-server connections
};
-- Disable account creation by default, for security
-- For more information see http://prosody.im/doc/creating_accounts
allow_registration = false;
-- DEFINED PER-VHOST
-- These are the SSL/TLS-related settings. If you don't want
-- to use SSL/TLS, you may comment or remove this
--ssl = {
-- key = "/etc/prosody/certs/localhost.key";
-- certificate = "/etc/prosody/certs/localhost.crt";
--}
-- Force clients to use encrypted connections? This option will
-- prevent clients from authenticating unless they are using encryption.
c2s_require_encryption = true
-- Force certificate authentication for server-to-server connections?
-- This provides ideal security, but requires servers you communicate
-- with to support encryption AND present valid, trusted certificates.
-- NOTE: Your version of LuaSec must support certificate verification!
-- For more information see http://prosody.im/doc/s2s#security
s2s_secure_auth = true
-- Many servers don't support encryption or have invalid or self-signed
-- certificates. You can list domains here that will not be required to
-- authenticate using certificates. They will be authenticated using DNS.
--s2s_insecure_domains = { "gmail.com" }
-- Even if you leave s2s_secure_auth disabled, you can still require valid
-- certificates for some domains by specifying a list here.
s2s_secure_domains = { "auth-xmpp.torproject.org","anon-xmpp.torproject.org" }
-- Required for init scripts and prosodyctl
pidfile = "/var/run/prosody/prosody.pid"
-- Select the authentication backend to use. The 'internal' providers
-- use Prosody's configured data storage to store the authentication data.
-- To allow Prosody to offer secure authentication mechanisms to clients, the
-- default provider stores passwords in plaintext. If you do not trust your
-- server please see http://prosody.im/doc/modules/mod_auth_internal_hashed
-- for information about using the hashed backend.
-- Select the storage backend to use. By default Prosody uses flat files
-- in its configured data directory, but it also supports more backends
-- through modules. An "sql" backend is included by default, but requires
-- additional dependencies. See http://prosody.im/doc/storage for more info.
--storage = "sql" -- Default is "internal"
-- For the "sql" backend, you can uncomment *one* of the below to configure:
--sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.
--sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
--sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
-- Logging configuration
-- For advanced logging see http://prosody.im/doc/logging
log = {
info = "/var/log/prosody/prosody.log"; -- Change 'info' to 'debug' for verbose logging
error = "/var/log/prosody/prosody.err";
"*syslog";
}
----------- Virtual hosts -----------
-- You need to add a VirtualHost entry for each domain you wish Prosody to serve.
-- Settings under each VirtualHost entry apply *only* to that host.
VirtualHost "anon-xmpp.torproject.org"
enabled = true
authentication = "anonymous"
-- Assign this host a certificate for TLS, otherwise it would use the one
-- set in the global section (if any).
-- Note that old-style SSL on port 5223 only supports one certificate, and will always
-- use the global one.
ssl = {
key = "/etc/prosody/certs/anon-xmpp.torproject.org.key";
certificate = "/etc/prosody/certs/anon-xmpp.torproject.org.crt";
}
VirtualHost "auth-xmpp.torproject.org"
enabled = true
authentication = "internal_plain"
ssl = {
key = "/etc/prosody/certs/auth-xmpp.torproject.org.key";
certificate = "/etc/prosody/certs/auth-xmpp.torproject.org.crt";
}
------ Components ------
-- You can specify components to add hosts that provide special services,
-- like multi-user conferences, and transports.
-- For more information on components, see http://prosody.im/doc/components
---Set up a MUC (multi-user chat) room server on conference.example.com:
--Component "conference.example.com" "muc"
-- Set up a SOCKS5 bytestream proxy for server-proxied file transfers:
-- Component "proxy.example.com" "proxy65"
---Set up an external component (default component port is 5347)
--
-- External components allow adding various services, such as gateways/
-- transports to other networks like ICQ, MSN and Yahoo. For more info
-- see: http://prosody.im/doc/components#adding_an_external_component
--
--Component "gateway.example.com"
-- component_secret = "password"
-- ignore the priority set by the client when routing messages. In effect any
-- incoming messages to the user's bare JID will be broadcast to all of the
-- user's connected resources instead of the one(s) with the highest priority.
-- ignore_presence_priority = true
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.