PolynomialDivision/dmesg-21-02-ubnt-nanostation-m Secret

## dmesg-21-02-ubnt-nanostation-m
root@OpenWrt:~# dmesg
[    0.000000] Linux version 5.4.163 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16423-d655eea053)) #0 Thu Dec 23 18:20:34 2021
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] MIPS: machine is Ubiquiti Nanostation M (XM)
[    0.000000] SoC: Atheros AR7241 rev 1
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000]   Normal zone: 72 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8120
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 24820K/32768K available (5254K kernel code, 189K rwdata, 688K rodata, 1220K init, 205K bss, 7948K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] random: get_random_bytes called from 0x8065fa28 with crng_init=0
[    0.000000] CPU clock: 390.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
[    0.000012] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
[    0.007904] Calibrating delay loop... 259.58 BogoMIPS (lpj=519168)
[    0.046033] pid_max: default: 32768 minimum: 301
[    0.050891] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.058179] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.072523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.082280] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.089230] pinctrl core: initialized pinctrl subsystem
[    0.098345] NET: Registered protocol family 16
[    0.142601] clocksource: Switched to clocksource MIPS
[    0.149192] thermal_sys: Registered thermal governor 'step_wise'
[    0.149741] NET: Registered protocol family 2
[    0.160422] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.168843] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.177268] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.184928] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.191975] TCP: Hash tables configured (established 1024 bind 1024)
[    0.198535] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.205128] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.212538] NET: Registered protocol family 1
[    0.216965] PCI: CLS 0 bytes, default 32
[    0.228333] workingset: timestamp_bits=14 max_order=13 bucket_order=0
[    0.246832] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.252667] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.283447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.294413] pinctrl-single 18040028.pinmux: 64 pins, size 8
[    0.301478] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.311701] printk: console [ttyS0] disabled
[    0.316110] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 12187500) is a 16550A
[    0.324801] printk: console [ttyS0] enabled
[    0.333198] printk: bootconsole [early0] disabled
[    0.362734] spi-nor spi0.0: mx25l6405d (8192 Kbytes)
[    0.367828] 6 fixed-partitions partitions found on MTD device spi0.0
[    0.374212] Creating 6 MTD partitions on "spi0.0":
[    0.379055] 0x000000000000-0x000000040000 : "u-boot"
[    0.385563] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.392391] 0x000000050000-0x0000007a0000 : "firmware"
[    0.403188] 2 uimage-fw partitions found on MTD device firmware
[    0.409207] Creating 2 MTD partitions on "firmware":
[    0.414220] 0x000000000000-0x000000200000 : "kernel"
[    0.420610] 0x000000200000-0x000000750000 : "rootfs"
[    0.427135] mtd: device 4 (rootfs) set to be root filesystem
[    0.435638] 1 squashfs-split partitions found on MTD device rootfs
[    0.441955] 0x000000520000-0x000000750000 : "rootfs_data"
[    0.448841] 0x0000007a0000-0x0000007b0000 : "board_config"
[    0.455898] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.462122] 0x0000007f0000-0x000000800000 : "art"
[    0.471561] libphy: Fixed MDIO Bus: probed
[    0.823722] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
[    1.142592] random: fast init done
[    1.463089] libphy: ag71xx_mdio: probed
[    1.468042] libphy: ar8xxx-mdio: probed
[    1.475194] switch0: Atheros AR724X/AR933X built-in rev. 2 switch registered on mdio.0
[    1.516825] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[    1.526955] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
[    1.533582] i2c /dev entries driver
[    1.540819] NET: Registered protocol family 10
[    1.554044] Segment Routing with IPv6
[    1.558005] NET: Registered protocol family 17
[    1.562630] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.575645] 8021q: 802.1Q VLAN Support v1.8
[    1.581248] PCI host bridge /ahb/apb/pcie-controller@180c0000 ranges:
[    1.587841]  MEM 0x0000000010000000..0x0000000013ffffff
[    1.593113]   IO 0x0000000000000000..0x0000000000000000
[    1.598679] PCI host bridge to bus 0000:00
[    1.602826] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    1.609743] pci_bus 0000:00: root bus resource [io  0x0000]
[    1.615355] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    1.622180] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.630194] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
[    1.636315] pci 0000:00:00.0: reg 0x10: [mem 0x10000000-0x1000ffff 64bit]
[    1.643322] pci 0000:00:00.0: supports D1
[    1.647373] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.654868] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.661554] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    1.988251] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:04 [uid=004dd041, driver=Generic PHY]
[    1.998983] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[    2.006291] hctosys: unable to open rtc device (rtc0)
[    2.026440] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    2.043976] Freeing unused kernel memory: 1220K
[    2.048557] This architecture does not have kernel memory protection.
[    2.055024] Run /sbin/init as init process
[    3.339638] init: Console is alive
[    3.343495] init: - watchdog -
[    5.510405] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.597618] usbcore: registered new interface driver usbfs
[    5.603324] usbcore: registered new interface driver hub
[    5.608851] usbcore: registered new device driver usb
[    5.623451] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.631954] ehci-fsl: Freescale EHCI Host controller driver
[    5.640155] ehci-platform: EHCI generic platform driver
[    5.651652] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.659719] ohci-platform: OHCI generic platform driver
[    5.666396] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.684329] init: - preinit -
[    8.275166] random: jshn: uninitialized urandom read (4 bytes read)
[    8.734738] random: jshn: uninitialized urandom read (4 bytes read)
[    8.882282] random: jshn: uninitialized urandom read (4 bytes read)
[    9.311829] urandom_read: 3 callbacks suppressed
[    9.311840] random: jshn: uninitialized urandom read (4 bytes read)
[    9.471261] random: procd: uninitialized urandom read (4 bytes read)
[   11.492198] eth1: link up (100Mbps/Full duplex)
[   11.496822] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   13.859228] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[   13.875375] urandom-seed: Seed file not found (/etc/urandom.seed)
[   14.014903] eth1: link down
[   14.036903] procd: - early -
[   14.040046] procd: - watchdog -
[   14.759847] procd: - watchdog -
[   14.792483] procd: - ubus -
[   14.891741] random: ubusd: uninitialized urandom read (4 bytes read)
[   14.901603] random: ubusd: uninitialized urandom read (4 bytes read)
[   14.913523] procd: - init -
[   16.319542] kmodloader: loading kernel modules from /etc/modules.d/*
[   16.375571] Loading modules backported from Linux version v5.10.85-0-ge4f2aee6612e
[   16.383266] Backport generated by backports.git v5.10.85-1-0-gf988973f
[   16.467822] xt_time: kernel timezone is -0000
[   16.834623] PPP generic driver version 2.4.2
[   16.843915] NET: Registered protocol family 24
[   17.008094] ath9k 0000:00:00.0: Direct firmware load for ath9k-eeprom-pci-0000:00:00.0.bin failed with error -2
[   17.018300] ath9k 0000:00:00.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:00:00.0.bin
[   17.397687] urngd: v1.0.2 started.
[   17.702174] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
[   17.710829] ath: EEPROM regdomain sanitized
[   17.710838] ath: EEPROM regdomain: 0x64
[   17.710843] ath: EEPROM indicates we should expect a direct regpair map
[   17.710870] ath: Country alpha2 being used: 00
[   17.710875] ath: Regpair used: 0x64
[   17.727722] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   17.731209] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=13
[   17.820787] kmodloader: done loading kernel modules from /etc/modules.d/*
[   18.084251] random: crng init done
[   77.792768] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   77.806684] jffs2_build_filesystem(): unlocking the mtd device...
[   77.806694] done.
[   77.814864] jffs2_build_filesystem(): erasing all blocks after the end marker...
[   79.383095] br-lan: port 1(eth1) entered blocking state
[   79.395920] br-lan: port 1(eth1) entered disabled state
[   79.401692] device eth1 entered promiscuous mode
[   79.755118] eth0: link up (1000Mbps/Full duplex)
[   80.386697] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   84.486134] eth1: link up (100Mbps/Full duplex)
[   84.498753] br-lan: port 1(eth1) entered blocking state
[   84.504033] br-lan: port 1(eth1) entered forwarding state
[   84.554747] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   97.455566] done.
[   97.457557] jffs2: notice: (2048) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   97.865301] overlayfs: upper fs does not support tmpfile.
	root@OpenWrt:~# dmesg
	[ 0.000000] Linux version 5.4.163 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16423-d655eea053)) #0 Thu Dec 23 18:20:34 2021
	[ 0.000000] printk: bootconsole [early0] enabled
	[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
	[ 0.000000] MIPS: machine is Ubiquiti Nanostation M (XM)
	[ 0.000000] SoC: Atheros AR7241 rev 1
	[ 0.000000] Initrd not found or empty - disabling initrd
	[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
	[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
	[ 0.000000] Zone ranges:
	[ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff]
	[ 0.000000] Movable zone start for each node
	[ 0.000000] Early memory node ranges
	[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff]
	[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
	[ 0.000000] On node 0 totalpages: 8192
	[ 0.000000] Normal zone: 72 pages used for memmap
	[ 0.000000] Normal zone: 0 pages reserved
	[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
	[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
	[ 0.000000] pcpu-alloc: [0] 0
	[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8120
	[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
	[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
	[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
	[ 0.000000] Writing ErrCtl register=00000000
	[ 0.000000] Readback ErrCtl register=00000000
	[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
	[ 0.000000] Memory: 24820K/32768K available (5254K kernel code, 189K rwdata, 688K rodata, 1220K init, 205K bss, 7948K reserved, 0K cma-reserved)
	[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
	[ 0.000000] NR_IRQS: 51
	[ 0.000000] random: get_random_bytes called from 0x8065fa28 with crng_init=0
	[ 0.000000] CPU clock: 390.000 MHz
	[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
	[ 0.000012] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
	[ 0.007904] Calibrating delay loop... 259.58 BogoMIPS (lpj=519168)
	[ 0.046033] pid_max: default: 32768 minimum: 301
	[ 0.050891] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
	[ 0.058179] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
	[ 0.072523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
	[ 0.082280] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
	[ 0.089230] pinctrl core: initialized pinctrl subsystem
	[ 0.098345] NET: Registered protocol family 16
	[ 0.142601] clocksource: Switched to clocksource MIPS
	[ 0.149192] thermal_sys: Registered thermal governor 'step_wise'
	[ 0.149741] NET: Registered protocol family 2
	[ 0.160422] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
	[ 0.168843] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
	[ 0.177268] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
	[ 0.184928] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
	[ 0.191975] TCP: Hash tables configured (established 1024 bind 1024)
	[ 0.198535] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
	[ 0.205128] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
	[ 0.212538] NET: Registered protocol family 1
	[ 0.216965] PCI: CLS 0 bytes, default 32
	[ 0.228333] workingset: timestamp_bits=14 max_order=13 bucket_order=0
	[ 0.246832] squashfs: version 4.0 (2009/01/31) Phillip Lougher
	[ 0.252667] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
	[ 0.283447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
	[ 0.294413] pinctrl-single 18040028.pinmux: 64 pins, size 8
	[ 0.301478] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
	[ 0.311701] printk: console [ttyS0] disabled
	[ 0.316110] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 12187500) is a 16550A
	[ 0.324801] printk: console [ttyS0] enabled
	[ 0.333198] printk: bootconsole [early0] disabled
	[ 0.362734] spi-nor spi0.0: mx25l6405d (8192 Kbytes)
	[ 0.367828] 6 fixed-partitions partitions found on MTD device spi0.0
	[ 0.374212] Creating 6 MTD partitions on "spi0.0":
	[ 0.379055] 0x000000000000-0x000000040000 : "u-boot"
	[ 0.385563] 0x000000040000-0x000000050000 : "u-boot-env"
	[ 0.392391] 0x000000050000-0x0000007a0000 : "firmware"
	[ 0.403188] 2 uimage-fw partitions found on MTD device firmware
	[ 0.409207] Creating 2 MTD partitions on "firmware":
	[ 0.414220] 0x000000000000-0x000000200000 : "kernel"
	[ 0.420610] 0x000000200000-0x000000750000 : "rootfs"
	[ 0.427135] mtd: device 4 (rootfs) set to be root filesystem
	[ 0.435638] 1 squashfs-split partitions found on MTD device rootfs
	[ 0.441955] 0x000000520000-0x000000750000 : "rootfs_data"
	[ 0.448841] 0x0000007a0000-0x0000007b0000 : "board_config"
	[ 0.455898] 0x0000007b0000-0x0000007f0000 : "cfg"
	[ 0.462122] 0x0000007f0000-0x000000800000 : "art"
	[ 0.471561] libphy: Fixed MDIO Bus: probed
	[ 0.823722] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
	[ 1.142592] random: fast init done
	[ 1.463089] libphy: ag71xx_mdio: probed
	[ 1.468042] libphy: ar8xxx-mdio: probed
	[ 1.475194] switch0: Atheros AR724X/AR933X built-in rev. 2 switch registered on mdio.0
	[ 1.516825] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
	[ 1.526955] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
	[ 1.533582] i2c /dev entries driver
	[ 1.540819] NET: Registered protocol family 10
	[ 1.554044] Segment Routing with IPv6
	[ 1.558005] NET: Registered protocol family 17
	[ 1.562630] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
	[ 1.575645] 8021q: 802.1Q VLAN Support v1.8
	[ 1.581248] PCI host bridge /ahb/apb/pcie-controller@180c0000 ranges:
	[ 1.587841] MEM 0x0000000010000000..0x0000000013ffffff
	[ 1.593113] IO 0x0000000000000000..0x0000000000000000
	[ 1.598679] PCI host bridge to bus 0000:00
	[ 1.602826] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
	[ 1.609743] pci_bus 0000:00: root bus resource [io 0x0000]
	[ 1.615355] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
	[ 1.622180] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
	[ 1.630194] pci 0000:00:00.0: [168c:002a] type 00 class 0x028000
	[ 1.636315] pci 0000:00:00.0: reg 0x10: [mem 0x10000000-0x1000ffff 64bit]
	[ 1.643322] pci 0000:00:00.0: supports D1
	[ 1.647373] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
	[ 1.654868] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
	[ 1.661554] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
	[ 1.988251] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:04 [uid=004dd041, driver=Generic PHY]
	[ 1.998983] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
	[ 2.006291] hctosys: unable to open rtc device (rtc0)
	[ 2.026440] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
	[ 2.043976] Freeing unused kernel memory: 1220K
	[ 2.048557] This architecture does not have kernel memory protection.
	[ 2.055024] Run /sbin/init as init process
	[ 3.339638] init: Console is alive
	[ 3.343495] init: - watchdog -
	[ 5.510405] kmodloader: loading kernel modules from /etc/modules-boot.d/*
	[ 5.597618] usbcore: registered new interface driver usbfs
	[ 5.603324] usbcore: registered new interface driver hub
	[ 5.608851] usbcore: registered new device driver usb
	[ 5.623451] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
	[ 5.631954] ehci-fsl: Freescale EHCI Host controller driver
	[ 5.640155] ehci-platform: EHCI generic platform driver
	[ 5.651652] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
	[ 5.659719] ohci-platform: OHCI generic platform driver
	[ 5.666396] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
	[ 5.684329] init: - preinit -
	[ 8.275166] random: jshn: uninitialized urandom read (4 bytes read)
	[ 8.734738] random: jshn: uninitialized urandom read (4 bytes read)
	[ 8.882282] random: jshn: uninitialized urandom read (4 bytes read)
	[ 9.311829] urandom_read: 3 callbacks suppressed
	[ 9.311840] random: jshn: uninitialized urandom read (4 bytes read)
	[ 9.471261] random: procd: uninitialized urandom read (4 bytes read)
	[ 11.492198] eth1: link up (100Mbps/Full duplex)
	[ 11.496822] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
	[ 13.859228] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
	[ 13.875375] urandom-seed: Seed file not found (/etc/urandom.seed)
	[ 14.014903] eth1: link down
	[ 14.036903] procd: - early -
	[ 14.040046] procd: - watchdog -
	[ 14.759847] procd: - watchdog -
	[ 14.792483] procd: - ubus -
	[ 14.891741] random: ubusd: uninitialized urandom read (4 bytes read)
	[ 14.901603] random: ubusd: uninitialized urandom read (4 bytes read)
	[ 14.913523] procd: - init -
	[ 16.319542] kmodloader: loading kernel modules from /etc/modules.d/*
	[ 16.375571] Loading modules backported from Linux version v5.10.85-0-ge4f2aee6612e
	[ 16.383266] Backport generated by backports.git v5.10.85-1-0-gf988973f
	[ 16.467822] xt_time: kernel timezone is -0000
	[ 16.834623] PPP generic driver version 2.4.2
	[ 16.843915] NET: Registered protocol family 24
	[ 17.008094] ath9k 0000:00:00.0: Direct firmware load for ath9k-eeprom-pci-0000:00:00.0.bin failed with error -2
	[ 17.018300] ath9k 0000:00:00.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:00:00.0.bin
	[ 17.397687] urngd: v1.0.2 started.
	[ 17.702174] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
	[ 17.710829] ath: EEPROM regdomain sanitized
	[ 17.710838] ath: EEPROM regdomain: 0x64
	[ 17.710843] ath: EEPROM indicates we should expect a direct regpair map
	[ 17.710870] ath: Country alpha2 being used: 00
	[ 17.710875] ath: Regpair used: 0x64
	[ 17.727722] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
	[ 17.731209] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=13
	[ 17.820787] kmodloader: done loading kernel modules from /etc/modules.d/*
	[ 18.084251] random: crng init done
	[ 77.792768] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
	[ 77.806684] jffs2_build_filesystem(): unlocking the mtd device...
	[ 77.806694] done.
	[ 77.814864] jffs2_build_filesystem(): erasing all blocks after the end marker...
	[ 79.383095] br-lan: port 1(eth1) entered blocking state
	[ 79.395920] br-lan: port 1(eth1) entered disabled state
	[ 79.401692] device eth1 entered promiscuous mode
	[ 79.755118] eth0: link up (1000Mbps/Full duplex)
	[ 80.386697] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
	[ 84.486134] eth1: link up (100Mbps/Full duplex)
	[ 84.498753] br-lan: port 1(eth1) entered blocking state
	[ 84.504033] br-lan: port 1(eth1) entered forwarding state
	[ 84.554747] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
	[ 97.455566] done.
	[ 97.457557] jffs2: notice: (2048) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
	[ 97.865301] overlayfs: upper fs does not support tmpfile.