Skip to content

Instantly share code, notes, and snippets.

@RSchulz
Created May 13, 2013
Embed
What would you like to do?
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libffi configure 3.0.13, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ .././configure --srcdir=.. --enable-builddir=x86_64-apple-darwin12.3.0 --disable-debug --disable-dependency-tracking --prefix=/usr/local/Cellar/libffi/3.0.13
## --------- ##
## Platform. ##
## --------- ##
hostname = rschulz-mbpr.local
uname -m = x86_64
uname -r = 12.3.0
uname -s = Darwin
uname -v = Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
/usr/bin/uname -p = i386
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = Mach kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel configured for up to 8 processors.
4 processors are physically available.
8 processors are logically available.
Processor type: i486 (Intel 80486)
Processors active: 0 1 2 3 4 5 6 7
Primary memory available: 16.00 gigabytes
Default processor set: 225 tasks, 1234 threads, 8 processors
Load average: 2.09, Mach factor: 5.90
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/Library/ENV/4.3
PATH: /usr/bin
PATH: /bin
PATH: /usr/sbin
PATH: /sbin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2591: checking build system type
configure:2605: result: x86_64-apple-darwin12.3.0
configure:2625: checking host system type
configure:2638: result: x86_64-apple-darwin12.3.0
configure:2658: checking target system type
configure:2671: result: x86_64-apple-darwin12.3.0
configure:2763: checking for gsed
configure:2794: result: sed
configure:2822: checking for a BSD-compatible install
configure:2890: result: /usr/bin/install -c
configure:2901: checking whether build environment is sane
configure:2956: result: yes
configure:3104: checking for a thread-safe mkdir -p
configure:3143: result: ../install-sh -c -d
configure:3150: checking for gawk
configure:3180: result: no
configure:3150: checking for mawk
configure:3180: result: no
configure:3150: checking for nawk
configure:3180: result: no
configure:3150: checking for awk
configure:3166: found /usr/bin/awk
configure:3177: result: awk
configure:3188: checking whether make sets $(MAKE)
configure:3210: result: yes
configure:3355: checking for gcc
configure:3382: result: cc
configure:3611: checking for C compiler version
configure:3620: cc --version >&5
Apple LLVM version 4.2 (clang-425.0.28) (based on LLVM 3.2svn)
Target: x86_64-apple-darwin12.3.0
Thread model: posix
configure:3631: $? = 0
configure:3620: cc -v >&5
Apple LLVM version 4.2 (clang-425.0.28) (based on LLVM 3.2svn)
Target: x86_64-apple-darwin12.3.0
Thread model: posix
clang: warning: argument unused during compilation: '-isystem /usr/local/include'
clang: warning: argument unused during compilation: '-isystem /usr/include/libxml2'
clang: warning: argument unused during compilation: '-isystem /System/Library/Frameworks/OpenGL.framework/Versions/Current/Headers/'
clang: warning: argument unused during compilation: '-L/usr/local/lib'
clang: warning: argument unused during compilation: '-L/System/Library/Frameworks/OpenGL.framework/Versions/Current/Libraries'
configure:3631: $? = 0
configure:3620: cc -V >&5
clang: error: unsupported option '-V -isystem/usr/local/include'
clang: error: no input files
configure:3631: $? = 1
configure:3620: cc -qversion >&5
clang: error: no input files
configure:3631: $? = 1
configure:3651: checking whether the C compiler works
configure:3673: cc conftest.c >&5
configure:3677: $? = 0
configure:3725: result: yes
configure:3728: checking for C compiler default output file name
configure:3730: result: a.out
configure:3736: checking for suffix of executables
configure:3743: cc -o conftest conftest.c >&5
configure:3747: $? = 0
configure:3769: result:
configure:3791: checking whether we are cross compiling
configure:3799: cc -o conftest conftest.c >&5
configure:3803: $? = 0
configure:3810: ./conftest
configure:3814: $? = 0
configure:3829: result: no
configure:3834: checking for suffix of object files
configure:3856: cc -c conftest.c >&5
configure:3860: $? = 0
configure:3881: result: o
configure:3885: checking whether we are using the GNU C compiler
configure:3904: cc -c conftest.c >&5
configure:3904: $? = 0
configure:3913: result: yes
configure:3922: checking whether cc accepts -g
configure:3942: cc -c -g conftest.c >&5
configure:3942: $? = 0
configure:3983: result: yes
configure:4000: checking for cc option to accept ISO C89
configure:4063: cc -c -g -O2 conftest.c >&5
configure:4063: $? = 0
configure:4076: result: none needed
configure:4107: checking for style of include used by make
configure:4135: result: GNU
configure:4161: checking dependency style of cc
configure:4272: result: none
configure:4302: checking dependency style of cc
configure:4411: result: none
configure:4430: checking whether cc understands -c and -o together
configure:4458: cc -c conftest.c -o conftest2.o >&5
configure:4462: $? = 0
configure:4468: cc -c conftest.c -o conftest2.o >&5
configure:4472: $? = 0
configure:4527: result: yes
configure:4598: checking how to print strings
configure:4625: result: printf
configure:4646: checking for a sed that does not truncate output
configure:4710: result: /usr/local/Library/ENV/4.3/sed
configure:4728: checking for grep that handles long lines and -e
configure:4786: result: /usr/bin/grep
configure:4791: checking for egrep
configure:4853: result: /usr/bin/grep -E
configure:4858: checking for fgrep
configure:4920: result: /usr/bin/grep -F
configure:4955: checking for ld used by cc
configure:5022: result: /usr/bin/ld
configure:5029: checking if the linker (/usr/bin/ld) is GNU ld
configure:5044: result: no
configure:5056: checking for BSD- or MS-compatible name lister (nm)
configure:5105: result: /usr/bin/nm
configure:5235: checking the name lister (/usr/bin/nm) interface
configure:5242: cc -c conftest.c >&5
configure:5245: /usr/bin/nm "conftest.o"
configure:5248: output
0000000000000000 S _some_variable
configure:5255: result: BSD nm
configure:5258: checking whether ln -s works
configure:5262: result: yes
configure:5270: checking the maximum length of command line arguments
configure:5401: result: 196608
configure:5418: checking whether the shell understands some XSI constructs
configure:5428: result: yes
configure:5432: checking whether the shell understands "+="
configure:5438: result: yes
configure:5473: checking how to convert x86_64-apple-darwin12.3.0 file names to x86_64-apple-darwin12.3.0 format
configure:5513: result: func_convert_file_noop
configure:5520: checking how to convert x86_64-apple-darwin12.3.0 file names to toolchain format
configure:5540: result: func_convert_file_noop
configure:5547: checking for /usr/bin/ld option to reload object files
configure:5554: result: -r
configure:5628: checking for objdump
configure:5658: result: no
configure:5687: checking how to recognize dependent libraries
configure:5889: result: pass_all
configure:5974: checking for dlltool
configure:6004: result: no
configure:6034: checking how to associate runtime and link libraries
configure:6061: result: printf %s\n
configure:6122: checking for ar
configure:6138: found /usr/bin/ar
configure:6149: result: ar
configure:6186: checking for archiver @FILE support
configure:6203: cc -c conftest.c >&5
configure:6203: $? = 0
configure:6206: ar cru libconftest.a @conftest.lst >&5
ar: @conftest.lst: No such file or directory
configure:6209: $? = 1
configure:6229: result: no
configure:6287: checking for strip
configure:6303: found /usr/bin/strip
configure:6314: result: strip
configure:6386: checking for ranlib
configure:6402: found /usr/bin/ranlib
configure:6413: result: ranlib
configure:6515: checking command to parse /usr/bin/nm output from cc object
configure:6635: cc -c conftest.c >&5
configure:6638: $? = 0
configure:6642: /usr/bin/nm conftest.o \| sed -n -e 's/^.*[ ]\([BCDEGRST][BCDEGRST]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm
configure:6645: $? = 0
cannot find nm_test_var in conftest.nm
configure:6635: cc -c conftest.c >&5
configure:6638: $? = 0
configure:6642: /usr/bin/nm conftest.o \| sed -n -e 's/^.*[ ]\([BCDEGRST][BCDEGRST]*\)[ ][ ]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1 _\2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm
configure:6645: $? = 0
configure:6711: cc -o conftest conftest.c conftstm.o >&5
configure:6714: $? = 0
configure:6752: result: ok
configure:6789: checking for sysroot
configure:6819: result: no
configure:7082: checking for mt
configure:7112: result: no
configure:7132: checking if : is a manifest tool
configure:7138: : '-?'
configure:7146: result: no
configure:7202: checking for dsymutil
configure:7218: found /usr/bin/dsymutil
configure:7229: result: dsymutil
configure:7294: checking for nmedit
configure:7310: found /usr/bin/nmedit
configure:7321: result: nmedit
configure:7386: checking for lipo
configure:7402: found /usr/bin/lipo
configure:7413: result: lipo
configure:7478: checking for otool
configure:7494: found /usr/bin/otool
configure:7505: result: otool
configure:7570: checking for otool64
configure:7600: result: no
configure:7645: checking for -single_module linker flag
cc -o libconftest.dylib -dynamiclib -Wl,-single_module conftest.c
configure:7678: result: yes
configure:7681: checking for -exported_symbols_list linker flag
configure:7701: cc -o conftest -Wl,-exported_symbols_list,conftest.sym conftest.c >&5
configure:7701: $? = 0
configure:7711: result: yes
configure:7714: checking for -force_load linker flag
cc -c -o conftest.o conftest.c
ar cru libconftest.a conftest.o
ranlib libconftest.a
cc -o conftest conftest.c -Wl,-force_load,./libconftest.a
configure:7746: result: yes
configure:7788: checking how to run the C preprocessor
configure:7819: cc -E conftest.c
configure:7819: $? = 0
configure:7833: cc -E conftest.c
conftest.c:11:10: fatal error: 'ac_nonexistent.h' file not found
#include <ac_nonexistent.h>
^
1 error generated.
configure:7833: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "libffi"
| #define PACKAGE_TARNAME "libffi"
| #define PACKAGE_VERSION "3.0.13"
| #define PACKAGE_STRING "libffi 3.0.13"
| #define PACKAGE_BUGREPORT "http://github.com/atgreen/libffi/issues"
| #define PACKAGE_URL ""
| #define PACKAGE "libffi"
| #define VERSION "3.0.13"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7858: result: cc -E
configure:7878: cc -E conftest.c
configure:7878: $? = 0
configure:7892: cc -E conftest.c
conftest.c:11:10: fatal error: 'ac_nonexistent.h' file not found
#include <ac_nonexistent.h>
^
1 error generated.
configure:7892: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "libffi"
| #define PACKAGE_TARNAME "libffi"
| #define PACKAGE_VERSION "3.0.13"
| #define PACKAGE_STRING "libffi 3.0.13"
| #define PACKAGE_BUGREPORT "http://github.com/atgreen/libffi/issues"
| #define PACKAGE_URL ""
| #define PACKAGE "libffi"
| #define VERSION "3.0.13"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7921: checking for ANSI C header files
configure:7941: cc -c conftest.c >&5
configure:7941: $? = 0
configure:8014: cc -o conftest conftest.c >&5
configure:8014: $? = 0
configure:8014: ./conftest
configure:8014: $? = 0
configure:8025: result: yes
configure:8038: checking for sys/types.h
configure:8038: cc -c conftest.c >&5
configure:8038: $? = 0
configure:8038: result: yes
configure:8038: checking for sys/stat.h
configure:8038: cc -c conftest.c >&5
configure:8038: $? = 0
configure:8038: result: yes
configure:8038: checking for stdlib.h
configure:8038: cc -c conftest.c >&5
configure:8038: $? = 0
configure:8038: result: yes
configure:8038: checking for string.h
configure:8038: cc -c conftest.c >&5
configure:8038: $? = 0
configure:8038: result: yes
configure:8038: checking for memory.h
configure:8038: cc -c conftest.c >&5
configure:8038: $? = 0
configure:8038: result: yes
configure:8038: checking for strings.h
configure:8038: cc -c conftest.c >&5
configure:8038: $? = 0
configure:8038: result: yes
configure:8038: checking for inttypes.h
configure:8038: cc -c conftest.c >&5
configure:8038: $? = 0
configure:8038: result: yes
configure:8038: checking for stdint.h
configure:8038: cc -c conftest.c >&5
configure:8038: $? = 0
configure:8038: result: yes
configure:8038: checking for unistd.h
configure:8038: cc -c conftest.c >&5
configure:8038: $? = 0
configure:8038: result: yes
configure:8052: checking for dlfcn.h
configure:8052: cc -c conftest.c >&5
configure:8052: $? = 0
configure:8052: result: yes
configure:8258: checking for objdir
configure:8273: result: .libs
configure:8544: checking if cc supports -fno-rtti -fno-exceptions
configure:8562: cc -c -fno-rtti -fno-exceptions conftest.c >&5
configure:8566: $? = 0
configure:8579: result: yes
configure:8906: checking for cc option to produce PIC
configure:8913: result: -fno-common -DPIC
configure:8921: checking if cc PIC flag -fno-common -DPIC works
configure:8939: cc -c -fno-common -DPIC -DPIC conftest.c >&5
configure:8943: $? = 0
configure:8956: result: yes
configure:8985: checking if cc static flag -static works
configure:9013: result: no
configure:9028: checking if cc supports -c -o file.o
configure:9049: cc -c -o out/conftest2.o conftest.c >&5
configure:9053: $? = 0
configure:9075: result: yes
configure:9083: checking if cc supports -c -o file.o
configure:9130: result: yes
configure:9163: checking whether the cc linker (/usr/bin/ld) supports shared libraries
configure:10316: result: yes
configure:10556: checking dynamic linker characteristics
configure:11293: result: darwin12.3.0 dyld
configure:11400: checking how to hardcode library paths into programs
configure:11425: result: immediate
configure:11965: checking whether stripping libraries is possible
configure:11979: result: yes
configure:12005: checking if libtool supports shared libraries
configure:12007: result: yes
configure:12010: checking whether to build shared libraries
configure:12031: result: yes
configure:12034: checking whether to build static libraries
configure:12038: result: yes
configure:12082: checking size of size_t
configure:12087: cc -o conftest conftest.c >&5
configure:12087: $? = 0
configure:12087: ./conftest
configure:12087: $? = 0
configure:12101: result: 8
configure:12112: checking for C compiler vendor
configure:12157: cc -c conftest.c >&5
conftest.c:30:9: error: use of undeclared identifier 'thisisanerror'
thisisanerror;
^
1 error generated.
configure:12157: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "libffi"
| #define PACKAGE_TARNAME "libffi"
| #define PACKAGE_VERSION "3.0.13"
| #define PACKAGE_STRING "libffi 3.0.13"
| #define PACKAGE_BUGREPORT "http://github.com/atgreen/libffi/issues"
| #define PACKAGE_URL ""
| #define PACKAGE "libffi"
| #define VERSION "3.0.13"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define SIZEOF_SIZE_T 8
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| #if !(defined(__ICC) || defined(__ECC) || defined(__INTEL_COMPILER))
| thisisanerror;
| #endif
|
| ;
| return 0;
| }
configure:12157: cc -c conftest.c >&5
conftest.c:30:9: error: use of undeclared identifier 'thisisanerror'
thisisanerror;
^
1 error generated.
configure:12157: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "libffi"
| #define PACKAGE_TARNAME "libffi"
| #define PACKAGE_VERSION "3.0.13"
| #define PACKAGE_STRING "libffi 3.0.13"
| #define PACKAGE_BUGREPORT "http://github.com/atgreen/libffi/issues"
| #define PACKAGE_URL ""
| #define PACKAGE "libffi"
| #define VERSION "3.0.13"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define SIZEOF_SIZE_T 8
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| #if !(defined(__xlc__) || defined(__xlC__) || defined(__IBMC__) || defined(__IBMCPP__))
| thisisanerror;
| #endif
|
| ;
| return 0;
| }
configure:12157: cc -c conftest.c >&5
conftest.c:30:9: error: use of undeclared identifier 'thisisanerror'
thisisanerror;
^
1 error generated.
configure:12157: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "libffi"
| #define PACKAGE_TARNAME "libffi"
| #define PACKAGE_VERSION "3.0.13"
| #define PACKAGE_STRING "libffi 3.0.13"
| #define PACKAGE_BUGREPORT "http://github.com/atgreen/libffi/issues"
| #define PACKAGE_URL ""
| #define PACKAGE "libffi"
| #define VERSION "3.0.13"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define SIZEOF_SIZE_T 8
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| #if !(defined(__PATHCC__) || defined(__PATHSCALE__))
| thisisanerror;
| #endif
|
| ;
| return 0;
| }
configure:12157: cc -c conftest.c >&5
configure:12157: $? = 0
configure:12165: result: clang
configure:12937: checking whether C compiler accepts -O3
configure:12956: cc -c -O3 -O3 conftest.c >&5
configure:12956: $? = 0
configure:12965: result: yes
configure:12998: : CFLAGS="$CFLAGS "
configure:13001: $? = 0
configure:13016: checking CFLAGS for maximum warnings
configure:13036: cc -c -O3 -warn all -warn all conftest.c >&5
clang: error: no such file or directory: 'all'
clang: error: no such file or directory: 'all'
configure:13036: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "libffi"
| #define PACKAGE_TARNAME "libffi"
| #define PACKAGE_VERSION "3.0.13"
| #define PACKAGE_STRING "libffi 3.0.13"
| #define PACKAGE_BUGREPORT "http://github.com/atgreen/libffi/issues"
| #define PACKAGE_URL ""
| #define PACKAGE "libffi"
| #define VERSION "3.0.13"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define SIZEOF_SIZE_T 8
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:13036: cc -c -O3 -pedantic -Wall conftest.c >&5
configure:13036: $? = 0
configure:13044: result: -Wall
configure:13060: : CFLAGS="$CFLAGS $ac_cv_cflags_warn_all"
configure:13063: $? = 0
configure:13093: checking whether to enable maintainer-specific portions of Makefiles
configure:13102: result: no
configure:13118: checking sys/mman.h usability
configure:13118: cc -c -O3 -Wall -fexceptions conftest.c >&5
configure:13118: $? = 0
configure:13118: result: yes
configure:13118: checking sys/mman.h presence
configure:13118: cc -E conftest.c
configure:13118: $? = 0
configure:13118: result: yes
configure:13118: checking for sys/mman.h
configure:13118: result: yes
configure:13130: checking for mmap
configure:13130: cc -o conftest -O3 -Wall -fexceptions conftest.c >&5
configure:13130: $? = 0
configure:13130: result: yes
configure:13140: checking for sys/mman.h
configure:13140: result: yes
configure:13148: checking for mmap
configure:13148: result: yes
configure:13161: checking whether read-only mmap of a plain file works
configure:13178: result: yes
configure:13180: checking whether mmap from /dev/zero works
configure:13202: result: no
configure:13206: checking for MAP_ANON(YMOUS)
configure:13229: cc -c -O3 -Wall -fexceptions conftest.c >&5
conftest.c:37:5: warning: unused variable 'n' [-Wunused-variable]
int n = MAP_ANONYMOUS;
^
1 warning generated.
configure:13229: $? = 0
configure:13236: result: yes
configure:13242: checking whether mmap with MAP_ANON(YMOUS) works
configure:13259: result: yes
configure:13759: checking for ANSI C header files
configure:13863: result: yes
configure:13873: checking for memcpy
configure:13873: cc -o conftest -O3 -Wall -fexceptions conftest.c >&5
conftest.c:52:6: warning: incompatible redeclaration of library function 'memcpy'
char memcpy ();
^
conftest.c:52:6: note: 'memcpy' is a builtin with type 'void *(void *, const void *, unsigned long)'
1 warning generated.
configure:13873: $? = 0
configure:13873: result: yes
configure:13882: checking for size_t
configure:13882: cc -c -O3 -Wall -fexceptions conftest.c >&5
configure:13882: $? = 0
configure:13882: cc -c -O3 -Wall -fexceptions conftest.c >&5
conftest.c:66:21: error: expected expression
if (sizeof ((size_t)))
^
1 error generated.
configure:13882: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "libffi"
| #define PACKAGE_TARNAME "libffi"
| #define PACKAGE_VERSION "3.0.13"
| #define PACKAGE_STRING "libffi 3.0.13"
| #define PACKAGE_BUGREPORT "http://github.com/atgreen/libffi/issues"
| #define PACKAGE_URL ""
| #define PACKAGE "libffi"
| #define VERSION "3.0.13"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define SIZEOF_SIZE_T 8
| #define HAVE_SYS_MMAN_H 1
| #define HAVE_MMAP 1
| #define HAVE_MMAP_FILE 1
| #define HAVE_MMAP_ANON 1
| #define STDC_HEADERS 1
| #define HAVE_MEMCPY 1
| /* end confdefs.h. */
| #include <stdio.h>
| #ifdef HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #ifdef STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # ifdef HAVE_STDLIB_H
| # include <stdlib.h>
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include <memory.h>
| # endif
| # include <string.h>
| #endif
| #ifdef HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #ifdef HAVE_INTTYPES_H
| # include <inttypes.h>
| #endif
| #ifdef HAVE_STDINT_H
| # include <stdint.h>
| #endif
| #ifdef HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| int
| main ()
| {
| if (sizeof ((size_t)))
| return 0;
| ;
| return 0;
| }
configure:13882: result: yes
configure:13895: checking for working alloca.h
configure:13912: cc -o conftest -O3 -Wall -fexceptions conftest.c >&5
configure:13912: $? = 0
configure:13920: result: yes
configure:13928: checking for alloca
configure:13965: cc -o conftest -O3 -Wall -fexceptions conftest.c >&5
configure:13965: $? = 0
configure:13973: result: yes
configure:14084: checking size of double
configure:14089: cc -o conftest -O3 -Wall -fexceptions conftest.c >&5
configure:14089: $? = 0
configure:14089: ./conftest
configure:14089: $? = 0
configure:14103: result: 8
configure:14117: checking size of long double
configure:14122: cc -o conftest -O3 -Wall -fexceptions conftest.c >&5
configure:14122: $? = 0
configure:14122: ./conftest
configure:14122: $? = 0
configure:14136: result: 16
configure:14161: checking whether byte ordering is bigendian
configure:14176: cc -c -O3 -Wall -fexceptions conftest.c >&5
configure:14176: $? = 0
configure:14221: cc -c -O3 -Wall -fexceptions conftest.c >&5
configure:14221: $? = 0
configure:14239: cc -c -O3 -Wall -fexceptions conftest.c >&5
conftest.c:42:4: error: use of undeclared identifier 'not'
not big endian
^
1 error generated.
configure:14239: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "libffi"
| #define PACKAGE_TARNAME "libffi"
| #define PACKAGE_VERSION "3.0.13"
| #define PACKAGE_STRING "libffi 3.0.13"
| #define PACKAGE_BUGREPORT "http://github.com/atgreen/libffi/issues"
| #define PACKAGE_URL ""
| #define PACKAGE "libffi"
| #define VERSION "3.0.13"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define SIZEOF_SIZE_T 8
| #define HAVE_SYS_MMAN_H 1
| #define HAVE_MMAP 1
| #define HAVE_MMAP_FILE 1
| #define HAVE_MMAP_ANON 1
| #define STDC_HEADERS 1
| #define HAVE_MEMCPY 1
| #define HAVE_ALLOCA_H 1
| #define HAVE_ALLOCA 1
| #define SIZEOF_DOUBLE 8
| #define SIZEOF_LONG_DOUBLE 16
| #define HAVE_LONG_DOUBLE 1
| /* end confdefs.h. */
| #include <sys/types.h>
| #include <sys/param.h>
|
| int
| main ()
| {
| #if BYTE_ORDER != BIG_ENDIAN
| not big endian
| #endif
|
| ;
| return 0;
| }
configure:14367: result: no
configure:14386: checking assembler .cfi pseudo-op support
configure:14404: cc -c -O3 -Wall -fexceptions conftest.c >&5
configure:14404: $? = 0
configure:14412: result: yes
configure:14704: checking whether .eh_frame section should be read-only
configure:14724: result: no
configure:14739: checking for __attribute__((visibility("hidden")))
configure:14748: cc -Werror -S conftest.c -o conftest.s 1>&5
clang: error: argument unused during compilation: '-L/usr/local/lib'
clang: error: argument unused during compilation: '-L/System/Library/Frameworks/OpenGL.framework/Versions/Current/Libraries'
configure:14751: $? = 1
configure:14760: result: no
configure:14974: checking that generated files are newer than configure
configure:14980: result: done
configure:15160: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by libffi config.status 3.0.13, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on rschulz-mbpr.local
config.status:1207: creating include/Makefile
config.status:1207: creating include/ffi.h
config.status:1207: creating Makefile
config.status:1207: creating testsuite/Makefile
config.status:1207: creating man/Makefile
config.status:1207: creating libffi.pc
config.status:1207: creating fficonfig.h
config.status:1433: linking ../src/x86/ffitarget.h to include/ffitarget.h
config.status:1452: executing buildir commands
config.status:1482: create top_srcdir/Makefile guessed from local Makefile
config.status:1574: buggy sed found - it deletes tab in "a" text parts
config.status:1597: build in x86_64-apple-darwin12.3.0 (HOST=)
config.status:1452: executing depfiles commands
config.status:1452: executing libtool commands
config.status:1452: executing include commands
config.status:1452: executing src commands
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-apple-darwin12.3.0
ac_cv_c_bigendian=no
ac_cv_c_compiler_gnu=yes
ac_cv_cflags_warn_all=-Wall
ac_cv_decl_map_anon=yes
ac_cv_env_CCASFLAGS_set=
ac_cv_env_CCASFLAGS_value=
ac_cv_env_CCAS_set=
ac_cv_env_CCAS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_func_alloca_works=yes
ac_cv_func_memcpy=yes
ac_cv_func_mmap=yes
ac_cv_func_mmap_anon=yes
ac_cv_func_mmap_dev_zero=no
ac_cv_func_mmap_file=yes
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_mman_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=x86_64-apple-darwin12.3.0
ac_cv_objext=o
ac_cv_path_EGREP='/usr/bin/grep -E'
ac_cv_path_FGREP='/usr/bin/grep -F'
ac_cv_path_GREP=/usr/bin/grep
ac_cv_path_SED=/usr/local/Library/ENV/4.3/sed
ac_cv_path_ax_enable_builddir_sed=sed
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=awk
ac_cv_prog_CPP='cc -E'
ac_cv_prog_ac_ct_AR=ar
ac_cv_prog_ac_ct_CC=cc
ac_cv_prog_ac_ct_DSYMUTIL=dsymutil
ac_cv_prog_ac_ct_LIPO=lipo
ac_cv_prog_ac_ct_NMEDIT=nmedit
ac_cv_prog_ac_ct_OTOOL=otool
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_c89=
ac_cv_prog_cc_cc_c_o=yes
ac_cv_prog_cc_g=yes
ac_cv_prog_make_make_set=yes
ac_cv_sizeof_double=8
ac_cv_sizeof_long_double=16
ac_cv_sizeof_size_t=8
ac_cv_target=x86_64-apple-darwin12.3.0
ac_cv_type_size_t=yes
ac_cv_working_alloca_h=yes
am_cv_CCAS_dependencies_compiler_type=none
am_cv_CC_dependencies_compiler_type=none
ax_cv_c_compiler_vendor=clang
ax_cv_check_cflags___O3=yes
gcc_cv_as_cfi_pseudo_op=yes
libffi_cv_hidden_visibility_attribute=no
libffi_cv_ro_eh_frame=no
lt_cv_apple_cc_single_mod=yes
lt_cv_ar_at_file=no
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_exported_symbols_list=yes
lt_cv_ld_force_load=yes
lt_cv_ld_reload_flag=-r
lt_cv_nm_interface='BSD nm'
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/bin/ld
lt_cv_path_NM=/usr/bin/nm
lt_cv_path_mainfest_tool=no
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_pic='-fno-common -DPIC'
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_rtti_exceptions=yes
lt_cv_prog_compiler_static_works=no
lt_cv_prog_gnu_ld=no
lt_cv_sharedlib_from_linklib_cmd='printf %s\n'
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([BCDEGRST][BCDEGRST]*\)[ ][ ]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1 _\2 \2/p'\'' | sed '\''/ __gnu_lto/d'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[BCDEGRST]* .* \(.*\)$/extern char \1;/p'\'''
lt_cv_sys_max_cmd_len=196608
lt_cv_to_host_file_cmd=func_convert_file_noop
lt_cv_to_tool_file_cmd=func_convert_file_noop
## ----------------- ##
## Output variables. ##
## ----------------- ##
AARCH64_FALSE=''
AARCH64_TRUE='#'
ACLOCAL='${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/missing --run aclocal-1.12'
ALLOCA=''
ALPHA_FALSE=''
ALPHA_TRUE='#'
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE='#'
AMTAR='$${TAR-tar}'
AM_LTLDFLAGS=''
AM_RUNTESTFLAGS=''
AR='ar'
ARM_FALSE=''
ARM_TRUE='#'
AUTOCONF='${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/missing --run autoconf'
AUTOHEADER='${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/missing --run autoheader'
AUTOMAKE='${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/missing --run automake-1.12'
AVR32_FALSE=''
AVR32_TRUE='#'
AWK='awk'
BFIN_FALSE=''
BFIN_TRUE='#'
CC='cc'
CCAS='cc'
CCASDEPMODE='depmode=none'
CCASFLAGS=''
CCDEPMODE='depmode=none'
CFLAGS='-O3 -Wall -fexceptions'
CPP='cc -E'
CPPFLAGS=''
CYGPATH_W='echo'
DEFS='-DHAVE_CONFIG_H'
DEPDIR='.deps'
DLLTOOL='false'
DSYMUTIL='dsymutil'
DUMPBIN=''
ECHO_C='\c'
ECHO_N=''
ECHO_T=''
EGREP='/usr/bin/grep -E'
EXEEXT=''
FFI_DEBUG_FALSE=''
FFI_DEBUG_TRUE='#'
FFI_EXEC_TRAMPOLINE_TABLE='0'
FFI_EXEC_TRAMPOLINE_TABLE_FALSE=''
FFI_EXEC_TRAMPOLINE_TABLE_TRUE='#'
FGREP='/usr/bin/grep -F'
FRV_FALSE=''
FRV_TRUE='#'
GREP='/usr/bin/grep'
HAVE_LONG_DOUBLE='1'
IA64_FALSE=''
IA64_TRUE='#'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD='/usr/bin/ld'
LDFLAGS=''
LIBFFI_CRIS_FALSE=''
LIBFFI_CRIS_TRUE='#'
LIBOBJS=''
LIBS=''
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LIPO='lipo'
LN_S='ln -s'
LTLIBOBJS=''
M32R_FALSE=''
M32R_TRUE='#'
M68K_FALSE=''
M68K_TRUE='#'
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/missing --run makeinfo'
MANIFEST_TOOL=':'
METAG_FALSE=''
METAG_TRUE='#'
MICROBLAZE_FALSE=''
MICROBLAZE_TRUE='#'
MIPS_FALSE=''
MIPS_TRUE='#'
MKDIR_P='../install-sh -c -d'
MOXIE_FALSE=''
MOXIE_TRUE='#'
NM='/usr/bin/nm'
NMEDIT='nmedit'
OBJDUMP='false'
OBJEXT='o'
OTOOL64=':'
OTOOL='otool'
PA64_HPUX_FALSE=''
PA64_HPUX_TRUE='#'
PACKAGE='libffi'
PACKAGE_BUGREPORT='http://github.com/atgreen/libffi/issues'
PACKAGE_NAME='libffi'
PACKAGE_STRING='libffi 3.0.13'
PACKAGE_TARNAME='libffi'
PACKAGE_URL=''
PACKAGE_VERSION='3.0.13'
PATH_SEPARATOR=':'
PA_HPUX_FALSE=''
PA_HPUX_TRUE='#'
PA_LINUX_FALSE=''
PA_LINUX_TRUE='#'
POWERPC_AIX_FALSE=''
POWERPC_AIX_TRUE='#'
POWERPC_DARWIN_FALSE=''
POWERPC_DARWIN_TRUE='#'
POWERPC_FALSE=''
POWERPC_FREEBSD_FALSE=''
POWERPC_FREEBSD_TRUE='#'
POWERPC_TRUE='#'
PRTDIAG=''
RANLIB='ranlib'
S390_FALSE=''
S390_TRUE='#'
SED='/usr/local/Library/ENV/4.3/sed'
SET_MAKE=''
SH64_FALSE=''
SH64_TRUE='#'
SHELL='/bin/sh'
SH_FALSE=''
SH_TRUE='#'
SPARC_FALSE=''
SPARC_TRUE='#'
STRIP='strip'
TARGET='X86_DARWIN'
TARGETDIR='x86'
TESTSUBDIR_FALSE='#'
TESTSUBDIR_TRUE=''
TILE_FALSE=''
TILE_TRUE='#'
VERSION='3.0.13'
X86_64_FALSE=''
X86_64_TRUE='#'
X86_DARWIN_FALSE='#'
X86_DARWIN_TRUE=''
X86_FALSE=''
X86_FREEBSD_FALSE=''
X86_FREEBSD_TRUE='#'
X86_TRUE='#'
X86_WIN32_FALSE=''
X86_WIN32_TRUE='#'
X86_WIN64_FALSE=''
X86_WIN64_TRUE='#'
XTENSA_FALSE=''
XTENSA_TRUE='#'
ac_ct_AR='ar'
ac_ct_CC='cc'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE='#'
am__fastdepCCAS_FALSE=''
am__fastdepCCAS_TRUE='#'
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE='#'
am__include='include'
am__isrc=' -I$(srcdir)'
am__leading_dot='.'
am__nodep=''
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
ax_enable_builddir_sed='sed'
bindir='${exec_prefix}/bin'
build='x86_64-apple-darwin12.3.0'
build_alias=''
build_cpu='x86_64'
build_os='darwin12.3.0'
build_vendor='apple'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='${prefix}'
host='x86_64-apple-darwin12.3.0'
host_alias=''
host_cpu='x86_64'
host_os='darwin12.3.0'
host_vendor='apple'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr/local/Cellar/libffi/3.0.13'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sys_symbol_underscore=''
sysconfdir='${prefix}/etc'
target='x86_64-apple-darwin12.3.0'
target_alias=''
target_cpu='x86_64'
target_os='darwin12.3.0'
target_vendor='apple'
toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
toolexeclibdir='$(libdir)'
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "libffi"
#define PACKAGE_TARNAME "libffi"
#define PACKAGE_VERSION "3.0.13"
#define PACKAGE_STRING "libffi 3.0.13"
#define PACKAGE_BUGREPORT "http://github.com/atgreen/libffi/issues"
#define PACKAGE_URL ""
#define PACKAGE "libffi"
#define VERSION "3.0.13"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_DLFCN_H 1
#define LT_OBJDIR ".libs/"
#define SIZEOF_SIZE_T 8
#define HAVE_SYS_MMAN_H 1
#define HAVE_MMAP 1
#define HAVE_MMAP_FILE 1
#define HAVE_MMAP_ANON 1
#define STDC_HEADERS 1
#define HAVE_MEMCPY 1
#define HAVE_ALLOCA_H 1
#define HAVE_ALLOCA 1
#define SIZEOF_DOUBLE 8
#define SIZEOF_LONG_DOUBLE 16
#define HAVE_LONG_DOUBLE 1
#define HAVE_AS_CFI_PSEUDO_OP 1
#define FFI_MMAP_EXEC_WRIT 1
#define EH_FRAME_FLAGS "aw"
configure: exit 0
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-apple-darwin12.3.0
ac_cv_env_CCASFLAGS_set=
ac_cv_env_CCASFLAGS_value=
ac_cv_env_CCAS_set=
ac_cv_env_CCAS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-apple-darwin12.3.0
ac_cv_target=x86_64-apple-darwin12.3.0
## ----------------- ##
## Output variables. ##
## ----------------- ##
AARCH64_FALSE=''
AARCH64_TRUE=''
ACLOCAL=''
ALLOCA=''
ALPHA_FALSE=''
ALPHA_TRUE=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR=''
AM_LTLDFLAGS=''
AM_RUNTESTFLAGS=''
AR=''
ARM_FALSE=''
ARM_TRUE=''
AUTOCONF=''
AUTOHEADER=''
AUTOMAKE=''
AVR32_FALSE=''
AVR32_TRUE=''
AWK=''
BFIN_FALSE=''
BFIN_TRUE=''
CC='cc'
CCAS=''
CCASDEPMODE=''
CCASFLAGS=''
CCDEPMODE=''
CFLAGS=''
CPP=''
CPPFLAGS=''
CYGPATH_W=''
DEFS=''
DEPDIR=''
DLLTOOL=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C='\c'
ECHO_N=''
ECHO_T=''
EGREP=''
EXEEXT=''
FFI_DEBUG_FALSE=''
FFI_DEBUG_TRUE=''
FFI_EXEC_TRAMPOLINE_TABLE=''
FFI_EXEC_TRAMPOLINE_TABLE_FALSE=''
FFI_EXEC_TRAMPOLINE_TABLE_TRUE=''
FGREP=''
FRV_FALSE=''
FRV_TRUE=''
GREP=''
HAVE_LONG_DOUBLE=''
IA64_FALSE=''
IA64_TRUE=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
INSTALL_STRIP_PROGRAM=''
LD=''
LDFLAGS=''
LIBFFI_CRIS_FALSE=''
LIBFFI_CRIS_TRUE=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIPO=''
LN_S=''
LTLIBOBJS=''
M32R_FALSE=''
M32R_TRUE=''
M68K_FALSE=''
M68K_TRUE=''
MAINT=''
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE=''
MAKEINFO=''
MANIFEST_TOOL=''
METAG_FALSE=''
METAG_TRUE=''
MICROBLAZE_FALSE=''
MICROBLAZE_TRUE=''
MIPS_FALSE=''
MIPS_TRUE=''
MKDIR_P=''
MOXIE_FALSE=''
MOXIE_TRUE=''
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PA64_HPUX_FALSE=''
PA64_HPUX_TRUE=''
PACKAGE=''
PACKAGE_BUGREPORT='http://github.com/atgreen/libffi/issues'
PACKAGE_NAME='libffi'
PACKAGE_STRING='libffi 3.0.13'
PACKAGE_TARNAME='libffi'
PACKAGE_URL=''
PACKAGE_VERSION='3.0.13'
PATH_SEPARATOR=':'
PA_HPUX_FALSE=''
PA_HPUX_TRUE=''
PA_LINUX_FALSE=''
PA_LINUX_TRUE=''
POWERPC_AIX_FALSE=''
POWERPC_AIX_TRUE=''
POWERPC_DARWIN_FALSE=''
POWERPC_DARWIN_TRUE=''
POWERPC_FALSE=''
POWERPC_FREEBSD_FALSE=''
POWERPC_FREEBSD_TRUE=''
POWERPC_TRUE=''
PRTDIAG=''
RANLIB=''
S390_FALSE=''
S390_TRUE=''
SED=''
SET_MAKE=''
SH64_FALSE=''
SH64_TRUE=''
SHELL='/bin/sh'
SH_FALSE=''
SH_TRUE=''
SPARC_FALSE=''
SPARC_TRUE=''
STRIP=''
TARGET='x86_64-apple-darwin12.3.0'
TARGETDIR=''
TESTSUBDIR_FALSE=''
TESTSUBDIR_TRUE=''
TILE_FALSE=''
TILE_TRUE=''
VERSION=''
X86_64_FALSE=''
X86_64_TRUE=''
X86_DARWIN_FALSE=''
X86_DARWIN_TRUE=''
X86_FALSE=''
X86_FREEBSD_FALSE=''
X86_FREEBSD_TRUE=''
X86_TRUE=''
X86_WIN32_FALSE=''
X86_WIN32_TRUE=''
X86_WIN64_FALSE=''
X86_WIN64_TRUE=''
XTENSA_FALSE=''
XTENSA_TRUE=''
ac_ct_AR=''
ac_ct_CC=''
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCCAS_FALSE=''
am__fastdepCCAS_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include=''
am__isrc=''
am__leading_dot=''
am__nodep=''
am__quote=''
am__tar=''
am__untar=''
ax_enable_builddir_sed=''
bindir='${exec_prefix}/bin'
build='x86_64-apple-darwin12.3.0'
build_alias=''
build_cpu='x86_64'
build_os='darwin12.3.0'
build_vendor='apple'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-apple-darwin12.3.0'
host_alias=''
host_cpu='x86_64'
host_os='darwin12.3.0'
host_vendor='apple'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr/local/Cellar/libffi/3.0.13'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sys_symbol_underscore=''
sysconfdir='${prefix}/etc'
target='x86_64-apple-darwin12.3.0'
target_alias=''
target_cpu='x86_64'
target_os='darwin12.3.0'
target_vendor='apple'
toolexecdir=''
toolexeclibdir=''
configure: exit 0
#! /bin/sh
# Generated by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=${CONFIG_SHELL-/bin/sh}
export SHELL
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
&& (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='print -r --'
as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
as_echo_n='/usr/ucb/echo -n'
else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
esac;
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
'
export as_echo_n_body
as_echo_n='sh -c $as_echo_n_body as_echo'
fi
export as_echo_body
as_echo='sh -c $as_echo_body as_echo'
fi
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
exit 1
fi
# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there. '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
&& ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
as_status=$1; test $as_status -eq 0 && as_status=1
if test "$4"; then
as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
$as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
$as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
return $1
} # as_fn_set_status
# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
set +e
as_fn_set_status $1
exit $1
} # as_fn_exit
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
{ eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
eval 'as_fn_append ()
{
eval $1+=\$2
}'
else
as_fn_append ()
{
eval $1=\$$1\$2
}
fi # as_fn_append
# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
eval 'as_fn_arith ()
{
as_val=$(( $* ))
}'
else
as_fn_arith ()
{
as_val=`expr "$@" || test $? -eq 1`
}
fi # as_fn_arith
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
xy) ECHO_C='\c';;
*) echo `echo ksh88 bug on AIX 6.1` > /dev/null
ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || eval $as_mkdir_p || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
## ----------------------------------- ##
## Main body of $CONFIG_STATUS script. ##
## ----------------------------------- ##
# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by libffi $as_me 3.0.13, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
on `(hostname || uname -n) 2>/dev/null | sed 1q`
"
# Files that config.status was made for.
config_files=" include/Makefile include/ffi.h Makefile testsuite/Makefile man/Makefile libffi.pc"
config_headers=" fficonfig.h"
config_links=" include/ffitarget.h:src/x86/ffitarget.h"
config_commands=" buildir depfiles libtool include src"
ac_cs_usage="\
\`$as_me' instantiates files and other configuration actions
from templates according to the current configuration. Unless the files
and actions are specified as TAGs, all are instantiated by default.
Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
--config print configuration, then exit
-q, --quiet, --silent
do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
instantiate the configuration file FILE
--header=FILE[:TEMPLATE]
instantiate the configuration header FILE
Configuration files:
$config_files
Configuration headers:
$config_headers
Configuration links:
$config_links
Configuration commands:
$config_commands
Report bugs to <http://github.com/atgreen/libffi/issues>."
ac_cs_config="'--srcdir=..' '--enable-builddir=x86_64-apple-darwin12.3.0' '--disable-debug' '--disable-dependency-tracking' '--prefix=/usr/local/Cellar/libffi/3.0.13'"
ac_cs_version="\
libffi config.status 3.0.13
configured by .././configure, generated by GNU Autoconf 2.69,
with options \"$ac_cs_config\"
Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
ac_pwd='/private/tmp/libffi-3JxK/libffi-3.0.13/x86_64-apple-darwin12.3.0'
srcdir='..'
INSTALL='/usr/bin/install -c'
MKDIR_P='../install-sh -c -d'
AWK='awk'
test -n "$AWK" || AWK=awk
# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
case $1 in
--*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
--*=)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=
ac_shift=:
;;
*)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
esac
case $ac_option in
# Handling of the options.
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
$as_echo "$ac_cs_version"; exit ;;
--config | --confi | --conf | --con | --co | --c )
$as_echo "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
'') as_fn_error $? "missing file argument" ;;
esac
as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
as_fn_append CONFIG_HEADERS " '$ac_optarg'"
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
as_fn_error $? "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
--help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
-*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;
*) as_fn_append ac_config_targets " $1"
ac_need_defaults=false ;;
esac
shift
done
ac_configure_extra_args=
if $ac_cs_silent; then
exec 6>/dev/null
ac_configure_extra_args="$ac_configure_extra_args --silent"
fi
if $ac_cs_recheck; then
set X /bin/sh '.././configure' '--srcdir=..' '--enable-builddir=x86_64-apple-darwin12.3.0' '--disable-debug' '--disable-dependency-tracking' '--prefix=/usr/local/Cellar/libffi/3.0.13' $ac_configure_extra_args --no-create --no-recursion
shift
$as_echo "running CONFIG_SHELL=/bin/sh $*" >&6
CONFIG_SHELL='/bin/sh'
export CONFIG_SHELL
exec "$@"
fi
exec 5>>config.log
{
echo
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
$as_echo "$ac_log"
} >&5
#
# INIT-COMMANDS
#
ax_enable_builddir_srcdir=".." # ..
ax_enable_builddir_host="" # / x86_64-apple-darwin12.3.0
ax_enable_builddir_version="3.0.13" # 3.0.13
ax_enable_builddir_package="libffi" # libffi
ax_enable_builddir_auxdir="/private/tmp/libffi-3JxK/libffi-3.0.13" #
ax_enable_builddir_sed="sed" # /usr/local/Library/ENV/4.3/sed
ax_enable_builddir="x86_64-apple-darwin12.3.0" #
AMDEP_TRUE="#" ac_aux_dir=".."
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
double_quote_subst='s/\(["`\\]\)/\\\1/g'
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
macro_version='2.4.2'
macro_revision='1.3337'
enable_shared='yes'
enable_static='yes'
pic_mode='default'
enable_fast_install='needless'
SHELL='/bin/sh'
ECHO='printf %s\n'
PATH_SEPARATOR=':'
host_alias=''
host='x86_64-apple-darwin12.3.0'
host_os='darwin12.3.0'
build_alias=''
build='x86_64-apple-darwin12.3.0'
build_os='darwin12.3.0'
SED='/usr/local/Library/ENV/4.3/sed'
Xsed='/usr/local/Library/ENV/4.3/sed -e 1s/^X//'
GREP='/usr/bin/grep'
EGREP='/usr/bin/grep -E'
FGREP='/usr/bin/grep -F'
LD='/usr/bin/ld'
NM='/usr/bin/nm'
LN_S='ln -s'
max_cmd_len='196608'
ac_objext='o'
exeext=''
lt_unset='unset'
lt_SP2NL='tr \040 \012'
lt_NL2SP='tr \015\012 \040\040'
lt_cv_to_host_file_cmd='func_convert_file_noop'
lt_cv_to_tool_file_cmd='func_convert_file_noop'
reload_flag=' -r'
reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
OBJDUMP='false'
deplibs_check_method='pass_all'
file_magic_cmd='$MAGIC_CMD'
file_magic_glob=''
want_nocaseglob='no'
DLLTOOL='false'
sharedlib_from_linklib_cmd='printf %s\n'
AR='ar'
AR_FLAGS='cru'
archiver_list_spec=''
STRIP='strip'
RANLIB='ranlib'
old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $tool_oldlib'
old_postuninstall_cmds=''
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $tool_oldlib'
lock_old_archive_extraction='yes'
CC='cc'
CFLAGS='-O3 -Wall -fexceptions'
compiler='cc'
GCC='yes'
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([BCDEGRST][BCDEGRST]*\)[ ][ ]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1 _\2 \2/p'\'' | sed '\''/ __gnu_lto/d'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[BCDEGRST]* .* \(.*\)$/extern char \1;/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\'''
nm_file_list_spec=''
lt_sysroot=''
objdir='.libs'
MAGIC_CMD='file'
lt_prog_compiler_no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
lt_prog_compiler_pic=' -fno-common -DPIC'
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_static=''
lt_cv_prog_compiler_c_o='yes'
need_locks='no'
MANIFEST_TOOL=':'
DSYMUTIL='dsymutil'
NMEDIT='nmedit'
LIPO='lipo'
OTOOL='otool'
OTOOL64=':'
libext='a'
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
extract_expsyms_cmds=''
archive_cmds_need_lc='no'
enable_shared_with_static_runtimes='no'
export_dynamic_flag_spec=''
whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
compiler_needs_object='no'
old_archive_from_new_cmds=''
old_archive_from_expsyms_cmds=''
archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring $single_module'
archive_expsym_cmds='sed '\''s,^,_,'\'' < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring $single_module ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs $compiler_flags'
module_expsym_cmds='sed -e '\''s,^,_,'\'' < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs $compiler_flags ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
with_gnu_ld='no'
allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
no_undefined_flag=''
hardcode_libdir_flag_spec=''
hardcode_libdir_separator=''
hardcode_direct='no'
hardcode_direct_absolute='no'
hardcode_minus_L='no'
hardcode_shlibpath_var='unsupported'
hardcode_automatic='yes'
inherit_rpath='no'
link_all_deplibs='yes'
always_export_symbols='no'
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
include_expsyms=''
prelink_cmds=''
postlink_cmds=''
file_list_spec=''
variables_saved_for_relink='PATH DYLD_LIBRARY_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH'
need_lib_prefix='no'
need_version='no'
version_type='darwin'
runpath_var=''
shlibpath_var='DYLD_LIBRARY_PATH'
shlibpath_overrides_runpath='yes'
libname_spec='lib$name'
library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
install_override_mode=''
postinstall_cmds=''
postuninstall_cmds=''
finish_cmds=''
finish_eval=''
hardcode_into_libs='no'
sys_lib_search_path_spec='/usr/lib/clang/4.2 /usr/local/lib'
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
hardcode_action='immediate'
enable_dlopen='unknown'
enable_dlopen_self='unknown'
enable_dlopen_self_static='unknown'
old_striplib='strip -S'
striplib='strip -x'
LTCC='cc'
LTCFLAGS=''
compiler='cc'
# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
$1
_LTECHO_EOF'
}
# Quote evaled strings.
for var in SHELL ECHO PATH_SEPARATOR SED GREP EGREP FGREP LD NM LN_S lt_SP2NL lt_NL2SP reload_flag OBJDUMP deplibs_check_method file_magic_cmd file_magic_glob want_nocaseglob DLLTOOL sharedlib_from_linklib_cmd AR AR_FLAGS archiver_list_spec STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_c_name_address lt_cv_sys_global_symbol_to_c_name_address_lib_prefix nm_file_list_spec lt_prog_compiler_no_builtin_flag lt_prog_compiler_pic lt_prog_compiler_wl lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks MANIFEST_TOOL DSYMUTIL NMEDIT LIPO OTOOL OTOOL64 shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec compiler_needs_object with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_separator exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec install_override_mode finish_eval old_striplib striplib; do
case `eval \\$ECHO \\""\\$$var"\\"` in
*[\\\`\"\$]*)
eval "lt_$var=\\\"\`\$ECHO \"\$$var\" | \$SED \"\$sed_quote_subst\"\`\\\""
;;
*)
eval "lt_$var=\\\"\$$var\\\""
;;
esac
done
# Double-quote double-evaled strings.
for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postlink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec sys_lib_dlsearch_path_spec; do
case `eval \\$ECHO \\""\\$$var"\\"` in
*[\\\`\"\$]*)
eval "lt_$var=\\\"\`\$ECHO \"\$$var\" | \$SED -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
;;
*)
eval "lt_$var=\\\"\$$var\\\""
;;
esac
done
ac_aux_dir='..'
xsi_shell='yes'
lt_shell_append='yes'
# See if we are running on zsh, and set the options which allow our
# commands through without removal of \ escapes INIT.
if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
fi
PACKAGE='libffi'
VERSION='3.0.13'
TIMESTAMP=''
RM='/bin/rm'
ofile='libtool'
TARGETDIR="x86"
# Handling of arguments.
for ac_config_target in $ac_config_targets
do
case $ac_config_target in
"fficonfig.h") CONFIG_HEADERS="$CONFIG_HEADERS fficonfig.h" ;;
"buildir") CONFIG_COMMANDS="$CONFIG_COMMANDS buildir" ;;
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
"include") CONFIG_COMMANDS="$CONFIG_COMMANDS include" ;;
"src") CONFIG_COMMANDS="$CONFIG_COMMANDS src" ;;
"include/ffitarget.h") CONFIG_LINKS="$CONFIG_LINKS include/ffitarget.h:src/$TARGETDIR/ffitarget.h" ;;
"include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
"include/ffi.h") CONFIG_FILES="$CONFIG_FILES include/ffi.h" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;;
"man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
"libffi.pc") CONFIG_FILES="$CONFIG_FILES libffi.pc" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
test "${CONFIG_LINKS+set}" = set || CONFIG_LINKS=$config_links
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
# Have a temporary directory for convenience. Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
tmp= ac_tmp=
trap 'exit_status=$?
: "${ac_tmp:=$tmp}"
{ test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
ac_tmp=$tmp
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
# This happens for instance with `./config.status config.h'.
if test -n "$CONFIG_FILES"; then
ac_cr=`echo X | tr X '\015'`
# On cygwin, bash can eat \r inside `` if the user requested igncr.
# But we know of no other shell where ac_cr would be empty at this
# point, so we can use a bashism as a fallback.
if test "x$ac_cr" = x; then
eval ac_cr=\$\'\\r\'
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
ac_cs_awk_cr='\\r'
else
ac_cs_awk_cr=$ac_cr
fi
echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
cat >>"$ac_tmp/subs1.awk" <<\_ACAWK &&
S["am__EXEEXT_FALSE"]=""
S["am__EXEEXT_TRUE"]="#"
S["LTLIBOBJS"]=""
S["LIBOBJS"]=""
S["toolexeclibdir"]="$(libdir)"
S["toolexecdir"]="$(libdir)/gcc-lib/$(target_alias)"
S["FFI_DEBUG_FALSE"]=""
S["FFI_DEBUG_TRUE"]="#"
S["TARGETDIR"]="x86"
S["TARGET"]="X86_DARWIN"
S["FFI_EXEC_TRAMPOLINE_TABLE"]="0"
S["FFI_EXEC_TRAMPOLINE_TABLE_FALSE"]=""
S["FFI_EXEC_TRAMPOLINE_TABLE_TRUE"]="#"
S["sys_symbol_underscore"]=""
S["HAVE_LONG_DOUBLE"]="1"
S["ALLOCA"]=""
S["XTENSA_FALSE"]=""
S["XTENSA_TRUE"]="#"
S["TILE_FALSE"]=""
S["TILE_TRUE"]="#"
S["PA64_HPUX_FALSE"]=""
S["PA64_HPUX_TRUE"]="#"
S["PA_HPUX_FALSE"]=""
S["PA_HPUX_TRUE"]="#"
S["PA_LINUX_FALSE"]=""
S["PA_LINUX_TRUE"]="#"
S["SH64_FALSE"]=""
S["SH64_TRUE"]="#"
S["SH_FALSE"]=""
S["SH_TRUE"]="#"
S["X86_64_FALSE"]=""
S["X86_64_TRUE"]="#"
S["S390_FALSE"]=""
S["S390_TRUE"]="#"
S["FRV_FALSE"]=""
S["FRV_TRUE"]="#"
S["LIBFFI_CRIS_FALSE"]=""
S["LIBFFI_CRIS_TRUE"]="#"
S["AVR32_FALSE"]=""
S["AVR32_TRUE"]="#"
S["ARM_FALSE"]=""
S["ARM_TRUE"]="#"
S["AARCH64_FALSE"]=""
S["AARCH64_TRUE"]="#"
S["POWERPC_FREEBSD_FALSE"]=""
S["POWERPC_FREEBSD_TRUE"]="#"
S["POWERPC_DARWIN_FALSE"]=""
S["POWERPC_DARWIN_TRUE"]="#"
S["POWERPC_AIX_FALSE"]=""
S["POWERPC_AIX_TRUE"]="#"
S["POWERPC_FALSE"]=""
S["POWERPC_TRUE"]="#"
S["MOXIE_FALSE"]=""
S["MOXIE_TRUE"]="#"
S["METAG_FALSE"]=""
S["METAG_TRUE"]="#"
S["MICROBLAZE_FALSE"]=""
S["MICROBLAZE_TRUE"]="#"
S["M68K_FALSE"]=""
S["M68K_TRUE"]="#"
S["M32R_FALSE"]=""
S["M32R_TRUE"]="#"
S["IA64_FALSE"]=""
S["IA64_TRUE"]="#"
S["ALPHA_FALSE"]=""
S["ALPHA_TRUE"]="#"
S["X86_DARWIN_FALSE"]="#"
S["X86_DARWIN_TRUE"]=""
S["X86_WIN64_FALSE"]=""
S["X86_WIN64_TRUE"]="#"
S["X86_WIN32_FALSE"]=""
S["X86_WIN32_TRUE"]="#"
S["X86_FREEBSD_FALSE"]=""
S["X86_FREEBSD_TRUE"]="#"
S["X86_FALSE"]=""
S["X86_TRUE"]="#"
S["SPARC_FALSE"]=""
S["SPARC_TRUE"]="#"
S["BFIN_FALSE"]=""
S["BFIN_TRUE"]="#"
S["MIPS_FALSE"]=""
S["MIPS_TRUE"]="#"
S["AM_LTLDFLAGS"]=""
S["AM_RUNTESTFLAGS"]=""
S["TESTSUBDIR_FALSE"]="#"
S["TESTSUBDIR_TRUE"]=""
S["MAINT"]="#"
S["MAINTAINER_MODE_FALSE"]=""
S["MAINTAINER_MODE_TRUE"]="#"
S["PRTDIAG"]=""
S["CPP"]="cc -E"
S["OTOOL64"]=":"
S["OTOOL"]="otool"
S["LIPO"]="lipo"
S["NMEDIT"]="nmedit"
S["DSYMUTIL"]="dsymutil"
S["MANIFEST_TOOL"]=":"
S["RANLIB"]="ranlib"
S["ac_ct_AR"]="ar"
S["AR"]="ar"
S["DLLTOOL"]="false"
S["OBJDUMP"]="false"
S["LN_S"]="ln -s"
S["NM"]="/usr/bin/nm"
S["ac_ct_DUMPBIN"]=""
S["DUMPBIN"]=""
S["LD"]="/usr/bin/ld"
S["FGREP"]="/usr/bin/grep -F"
S["EGREP"]="/usr/bin/grep -E"
S["GREP"]="/usr/bin/grep"
S["SED"]="/usr/local/Library/ENV/4.3/sed"
S["LIBTOOL"]="$(SHELL) $(top_builddir)/libtool"
S["am__fastdepCCAS_FALSE"]=""
S["am__fastdepCCAS_TRUE"]="#"
S["CCASDEPMODE"]="depmode=none"
S["CCASFLAGS"]=""
S["CCAS"]="cc"
S["am__fastdepCC_FALSE"]=""
S["am__fastdepCC_TRUE"]="#"
S["CCDEPMODE"]="depmode=none"
S["am__nodep"]=""
S["AMDEPBACKSLASH"]=""
S["AMDEP_FALSE"]=""
S["AMDEP_TRUE"]="#"
S["am__quote"]=""
S["am__include"]="include"
S["DEPDIR"]=".deps"
S["OBJEXT"]="o"
S["EXEEXT"]=""
S["ac_ct_CC"]="cc"
S["CPPFLAGS"]=""
S["LDFLAGS"]=""
S["CFLAGS"]="-O3 -Wall -fexceptions"
S["CC"]="cc"
S["am__untar"]="$${TAR-tar} xf -"
S["am__tar"]="$${TAR-tar} chof - \"$$tardir\""
S["AMTAR"]="$${TAR-tar}"
S["am__leading_dot"]="."
S["SET_MAKE"]=""
S["AWK"]="awk"
S["mkdir_p"]="$(MKDIR_P)"
S["MKDIR_P"]="../install-sh -c -d"
S["INSTALL_STRIP_PROGRAM"]="$(install_sh) -c -s"
S["STRIP"]="strip"
S["install_sh"]="${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/install-sh"
S["MAKEINFO"]="${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/missing --run makeinfo"
S["AUTOHEADER"]="${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/missing --run autoheader"
S["AUTOMAKE"]="${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/missing --run automake-1.12"
S["AUTOCONF"]="${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/missing --run autoconf"
S["ACLOCAL"]="${SHELL} /private/tmp/libffi-3JxK/libffi-3.0.13/missing --run aclocal-1.12"
S["VERSION"]="3.0.13"
S["PACKAGE"]="libffi"
S["CYGPATH_W"]="echo"
S["am__isrc"]=" -I$(srcdir)"
S["INSTALL_DATA"]="${INSTALL} -m 644"
S["INSTALL_SCRIPT"]="${INSTALL}"
S["INSTALL_PROGRAM"]="${INSTALL}"
S["ax_enable_builddir_sed"]="sed"
S["target_os"]="darwin12.3.0"
S["target_vendor"]="apple"
S["target_cpu"]="x86_64"
S["target"]="x86_64-apple-darwin12.3.0"
S["host_os"]="darwin12.3.0"
S["host_vendor"]="apple"
S["host_cpu"]="x86_64"
S["host"]="x86_64-apple-darwin12.3.0"
S["build_os"]="darwin12.3.0"
S["build_vendor"]="apple"
S["build_cpu"]="x86_64"
S["build"]="x86_64-apple-darwin12.3.0"
S["target_alias"]=""
S["host_alias"]=""
S["build_alias"]=""
S["LIBS"]=""
S["ECHO_T"]=""
S["ECHO_N"]=""
S["ECHO_C"]="\\c"
S["DEFS"]="-DHAVE_CONFIG_H"
S["mandir"]="${datarootdir}/man"
S["localedir"]="${datarootdir}/locale"
S["libdir"]="${exec_prefix}/lib"
S["psdir"]="${docdir}"
S["pdfdir"]="${docdir}"
S["dvidir"]="${docdir}"
S["htmldir"]="${docdir}"
S["infodir"]="${datarootdir}/info"
S["docdir"]="${datarootdir}/doc/${PACKAGE_TARNAME}"
S["oldincludedir"]="/usr/include"
S["includedir"]="${prefix}/include"
S["localstatedir"]="${prefix}/var"
S["sharedstatedir"]="${prefix}/com"
S["sysconfdir"]="${prefix}/etc"
S["datadir"]="${datarootdir}"
S["datarootdir"]="${prefix}/share"
S["libexecdir"]="${exec_prefix}/libexec"
S["sbindir"]="${exec_prefix}/sbin"
S["bindir"]="${exec_prefix}/bin"
S["program_transform_name"]="s,x,x,"
S["prefix"]="/usr/local/Cellar/libffi/3.0.13"
S["exec_prefix"]="${prefix}"
S["PACKAGE_URL"]=""
S["PACKAGE_BUGREPORT"]="http://github.com/atgreen/libffi/issues"
S["PACKAGE_STRING"]="libffi 3.0.13"
S["PACKAGE_VERSION"]="3.0.13"
S["PACKAGE_TARNAME"]="libffi"
S["PACKAGE_NAME"]="libffi"
S["PATH_SEPARATOR"]=":"
S["SHELL"]="/bin/sh"
_ACAWK
cat >>"$ac_tmp/subs1.awk" <<_ACAWK &&
for (key in S) S_is_set[key] = 1
FS = ""
}
{
line = $ 0
nfields = split(line, field, "@")
substed = 0
len = length(field[1])
for (i = 2; i < nfields; i++) {
key = field[i]
keylen = length(key)
if (S_is_set[key]) {
value = S[key]
line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
len += length(value) + length(field[++i])
substed = 1
} else
len += 1 + keylen
}
print line
}
_ACAWK
if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
cat
fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
|| as_fn_error $? "could not setup config files machinery" "$LINENO" 5
fi # test -n "$CONFIG_FILES"
# Set up the scripts for CONFIG_HEADERS section.
# No need to generate them if there are no CONFIG_HEADERS.
# This happens for instance with `./config.status Makefile'.
if test -n "$CONFIG_HEADERS"; then
cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
BEGIN {
D["PACKAGE_NAME"]=" \"libffi\""
D["PACKAGE_TARNAME"]=" \"libffi\""
D["PACKAGE_VERSION"]=" \"3.0.13\""
D["PACKAGE_STRING"]=" \"libffi 3.0.13\""
D["PACKAGE_BUGREPORT"]=" \"http://github.com/atgreen/libffi/issues\""
D["PACKAGE_URL"]=" \"\""
D["PACKAGE"]=" \"libffi\""
D["VERSION"]=" \"3.0.13\""
D["STDC_HEADERS"]=" 1"
D["HAVE_SYS_TYPES_H"]=" 1"
D["HAVE_SYS_STAT_H"]=" 1"
D["HAVE_STDLIB_H"]=" 1"
D["HAVE_STRING_H"]=" 1"
D["HAVE_MEMORY_H"]=" 1"
D["HAVE_STRINGS_H"]=" 1"
D["HAVE_INTTYPES_H"]=" 1"
D["HAVE_STDINT_H"]=" 1"
D["HAVE_UNISTD_H"]=" 1"
D["HAVE_DLFCN_H"]=" 1"
D["LT_OBJDIR"]=" \".libs/\""
D["SIZEOF_SIZE_T"]=" 8"
D["HAVE_SYS_MMAN_H"]=" 1"
D["HAVE_MMAP"]=" 1"
D["HAVE_MMAP_FILE"]=" 1"
D["HAVE_MMAP_ANON"]=" 1"
D["STDC_HEADERS"]=" 1"
D["HAVE_MEMCPY"]=" 1"
D["HAVE_ALLOCA_H"]=" 1"
D["HAVE_ALLOCA"]=" 1"
D["SIZEOF_DOUBLE"]=" 8"
D["SIZEOF_LONG_DOUBLE"]=" 16"
D["HAVE_LONG_DOUBLE"]=" 1"
D["HAVE_AS_CFI_PSEUDO_OP"]=" 1"
D["FFI_MMAP_EXEC_WRIT"]=" 1"
D["EH_FRAME_FLAGS"]=" \"aw\""
for (key in D) D_is_set[key] = 1
FS = ""
}
/^[\t ]*#[\t ]*(define|undef)[\t ]+[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*([\t (]|$)/ {
line = $ 0
split(line, arg, " ")
if (arg[1] == "#") {
defundef = arg[2]
mac1 = arg[3]
} else {
defundef = substr(arg[1], 2)
mac1 = arg[2]
}
split(mac1, mac2, "(") #)
macro = mac2[1]
prefix = substr(line, 1, index(line, defundef) - 1)
if (D_is_set[macro]) {
# Preserve the white space surrounding the "#".
print prefix "define", macro P[macro] D[macro]
next
} else {
# Replace #undef with comments. This is necessary, for example,
# in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
if (defundef == "undef") {
print "/*", prefix defundef, macro, "*/"
next
}
}
}
{ print }
_ACAWK
as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"
eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :L $CONFIG_LINKS :C $CONFIG_COMMANDS"
shift
for ac_tag
do
case $ac_tag in
:[FHLC]) ac_mode=$ac_tag; continue;;
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
:L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
ac_save_IFS=$IFS
IFS=:
set x $ac_tag
IFS=$ac_save_IFS
shift
ac_file=$1
shift
case $ac_mode in
:L) ac_source=$1;;
:[FH])
ac_file_inputs=
for ac_f
do
case $ac_f in
-) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
test -f "$ac_f" ||
case $ac_f in
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
as_fn_append ac_file_inputs " '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
configure_input='Generated from '`
$as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
`' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
fi
# Neutralize special characters interpreted by sed in replacement strings.
case $configure_input in #(
*\&* | *\|* | *\\* )
ac_sed_conf_input=`$as_echo "$configure_input" |
sed 's/[\\\\&|]/\\\\&/g'`;; #(
*) ac_sed_conf_input=$configure_input;;
esac
case $ac_tag in
*:-:* | *:-) cat >"$ac_tmp/stdin" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
as_dir="$ac_dir"; as_fn_mkdir_p
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
case $ac_mode in
:F)
#
# CONFIG_FILE
#
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
ac_MKDIR_P=$MKDIR_P
case $MKDIR_P in
[\\/$]* | ?:[\\/]* ) ;;
*/*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
esac
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
ac_sed_dataroot='
/datarootdir/ {
p
q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
ac_datarootdir_hack='
s&@datadir@&${datarootdir}&g
s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g
s&@infodir@&${datarootdir}/info&g
s&@localedir@&${datarootdir}/locale&g
s&@mandir@&${datarootdir}/man&g
s&\${datarootdir}&${prefix}/share&g' ;;
esac
ac_sed_extra="
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s|@configure_input@|$ac_sed_conf_input|;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
>$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
"$ac_tmp/out"`; test -z "$ac_out"; } &&
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined" >&2;}
rm -f "$ac_tmp/stdin"
case $ac_file in
-) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
*) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
esac \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
:H)
#
# CONFIG_HEADER
#
if test x"$ac_file" != x-; then
{
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
} >"$ac_tmp/config.h" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
rm -f "$ac_file"
mv "$ac_tmp/config.h" "$ac_file" \
|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
fi
else
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
|| as_fn_error $? "could not create -" "$LINENO" 5
fi
# Compute "$ac_file"'s index in $config_headers.
_am_arg="$ac_file"
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$_am_arg" : 'X\(//\)[^/]' \| \
X"$_am_arg" : 'X\(//\)$' \| \
X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$_am_arg" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`/stamp-h$_am_stamp_count
;;
:L)
#
# CONFIG_LINK
#
if test "$ac_source" = "$ac_file" && test "$srcdir" = '.'; then
:
else
# Prefer the file from the source tree if names are identical.
if test "$ac_source" = "$ac_file" || test ! -r "$ac_source"; then
ac_source=$srcdir/$ac_source
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: linking $ac_source to $ac_file" >&5
$as_echo "$as_me: linking $ac_source to $ac_file" >&6;}
if test ! -r "$ac_source"; then
as_fn_error $? "$ac_source: file not found" "$LINENO" 5
fi
rm -f "$ac_file"
# Try a relative symlink, then a hard link, then a copy.
case $ac_source in
[\\/$]* | ?:[\\/]* ) ac_rel_source=$ac_source ;;
*) ac_rel_source=$ac_top_build_prefix$ac_source ;;
esac
ln -s "$ac_rel_source" "$ac_file" 2>/dev/null ||
ln "$ac_source" "$ac_file" 2>/dev/null ||
cp -p "$ac_source" "$ac_file" ||
as_fn_error $? "cannot link or copy $ac_source to $ac_file" "$LINENO" 5
fi
;;
:C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
$as_echo "$as_me: executing $ac_file commands" >&6;}
;;
esac
case $ac_file$ac_mode in
"buildir":C) ac_top_srcdir="$ax_enable_builddir_srcdir"
if test ".$ax_enable_builddir" = ".." ; then
if test -f "$top_srcdir/Makefile" ; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: skipping top_srcdir/Makefile - left untouched" >&5
$as_echo "$as_me: skipping top_srcdir/Makefile - left untouched" >&6;}
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: skipping top_srcdir/Makefile - not created" >&5
$as_echo "$as_me: skipping top_srcdir/Makefile - not created" >&6;}
fi
else
if test -f "$ac_top_srcdir/Makefile" ; then
a=`grep "^VERSION " "$ac_top_srcdir/Makefile"` ; b=`grep "^VERSION " Makefile`
test "$a" != "$b" && rm "$ac_top_srcdir/Makefile"
fi
if test -f "$ac_top_srcdir/Makefile" ; then
echo "$ac_top_srcdir/Makefile : $ac_top_srcdir/Makefile.in" > $tmp/conftemp.mk
echo " @ echo 'REMOVED,,,' >\$@" >> $tmp/conftemp.mk
eval "${MAKE-make} -f $tmp/conftemp.mk 2>/dev/null >/dev/null"
if grep '^REMOVED,,,' "$ac_top_srcdir/Makefile" >/dev/null
then rm $ac_top_srcdir/Makefile ; fi
cp $tmp/conftemp.mk $ac_top_srcdir/makefiles.mk~ ## DEBUGGING
fi
if test ! -f "$ac_top_srcdir/Makefile" ; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: create top_srcdir/Makefile guessed from local Makefile" >&5
$as_echo "$as_me: create top_srcdir/Makefile guessed from local Makefile" >&6;}
x='`' ; cat >$tmp/conftemp.sed <<_EOF
/^\$/n
x
/^\$/bS
x
/\\\\\$/{H;d;}
{H;s/.*//;x;}
bM
:S
x
/\\\\\$/{h;d;}
{h;s/.*//;x;}
:M
s/\\(\\n\\) /\\1 /g
/^ /d
/^[ ]*[\\#]/d
/^VPATH *=/d
s/^srcdir *=.*/srcdir = ./
s/^top_srcdir *=.*/top_srcdir = ./
/[:=]/!d
/^\\./d
/ = /b
/ .= /b
/:/!b
s/:.*/:/
s/ / /g
s/ \\([a-z][a-z-]*[a-zA-Z0-9]\\)\\([ :]\\)/ \\1 \\1-all\\2/g
s/^\\([a-z][a-z-]*[a-zA-Z0-9]\\)\\([ :]\\)/\\1 \\1-all\\2/
s/ / /g
/^all all-all[ :]/i\\
all-configured : all-all
s/ [a-zA-Z0-9-]*-all [a-zA-Z0-9-]*-all-all//g
/-all-all/d
a\\
@ HOST="\$(HOST)\" \\\\\\
; test ".\$\$HOST" = "." && HOST=$x sh $ax_enable_builddir_auxdir/config.guess $x \\\\\\
; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
; use=$x basename "\$\@" -all $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
; echo "MAKE \$\$HOST : \$\$n * \$\@"; if test "\$\$n" -eq "0" ; then : \\\\\\
; BUILD=$x grep "^####.*|" Makefile |tail -1| sed -e 's/.*|//' $x ; fi \\\\\\
; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
; test "\$\$use" = "\$\@" && BUILD=$x echo "\$\$BUILD" | tail -1 $x \\\\\\
; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
; (cd "\$\$i" && test ! -f configure && \$(MAKE) \$\$use) || exit; done
/dist-all *:/a\\
@ HOST="\$(HOST)\" \\\\\\
; test ".\$\$HOST" = "." && HOST=$x sh $ax_enable_builddir_auxdir/config.guess $x \\\\\\
; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
; found=$x echo \$\$BUILD | wc -w $x \\\\\\
; echo "MAKE \$\$HOST : \$\$found \$(PACKAGE)-\$(VERSION).tar.*" \\\\\\
; if test "\$\$found" -eq "0" ; then : \\\\\\
; BUILD=$x grep "^#### .*|" Makefile |tail -1| sed -e 's/.*|//' $x \\\\\\
; fi ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
; for f in \$\$i/\$(PACKAGE)-\$(VERSION).tar.* \\\\\\
; do test -f "\$\$f" && mv "\$\$f" \$(PUB). ; done ; break ; done
/dist-[a-zA-Z0-9]*-all *:/a\\