gistfile1.py

from energenie import switch_on, switch_off
from time import sleep
from datetime import datetime, time
import RPi.GPIO as GPIO
import thread

now = datetime.now()

GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)

tv_switch = 2
GPIO.setup(tv_switch, GPIO.IN, GPIO.PUD_UP)

def blanket():
    if time(21,30) <= now.time() <= time(00,30):
        switch_on(1)
        print("blanket on")
    else:
        switch_off(1)
        print("blanket off")
    sleep(1)

def heater():
    if time(20,30) <= now.time() <= time(00,30):
        switch_on(2)
        print("heater on")

    if time(07,30) <= now.time() <= time(09,00):
        switch_on(2)
        print("heater on")
    else:
        switch_off(2)
        print("heater off")
    sleep(1)


def tv():
    if tv_switch True:
        switch_on(3) # Turn on USB hub powering Pi and speakers
        print("TV on")
    else:
        switch_off(3)
        print("TV off")
    sleep(1)

def LightLevel(pin):
    reading = 0
    GPIO.setup(pin, GPIO.OUT)
    GPIO.output(pin, GPIO.LOW)
    time.sleep(0.1)

    GPIO.setup(pin, GPIO.IN)
    # This takes about 1 millisecond per loop cycle
    while (GPIO.input(pin) == GPIO.LOW):
            reading += 1
    return reading

def UnicornPattern():


def Unicorn(LightValue):
    if LightValue > 25: # Light is on
        print("Unicorn - light's on, awaiting")
        time.sleep(1)
        if LightValue < 25: # then light is turned off
            print("Unicorn - doing my thang")
            UnicornPattern() # Dim light for 30 seconds
    else:
        print("Unicorn - it's dark")


def main():
    print("Blanket & Heater thread")
    blanket()
    heater()
    time.sleep(10)

GPIO.add_event_detect(2, GPIO.FALLING, tv, 1000)

if __name__ == '__main__':
    try:
        thread.start_new_thread(main())
        thread.start_new_thread(Unicorn(LightLevel(18)))
    except KeyboardInterrupt:
        GPIO.cleanup()
    finally:
        GPIO.cleanup()