ESPHome Code for Multi-sensor

garage-multisensor.yaml

esphome:
  name: garage-multisensor

esp8266:
  board: nodemcuv2

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "your-auto-generated-key-here"

ota:
  password: !secret ota_password

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Garage-Multisensor"
    password: !secret ap_password

captive_portal:

# Device config
i2c:           #AHT20 is i2c
  scan: true

sensor:
  # Temperatue / Humidity
  - platform: aht10   #Also for AHT20
    temperature:
      name: "Garage Temperature2"
      device_class: temperature
    humidity:
      name: "Garage Humidity2"
      device_class: humidity
    update_interval: 120s

 # Analog Light Level
  - platform: adc
    pin: A0
    name: "Garage Analog Light Level"
    unit_of_measurement: lux
    device_class: illuminance
    update_interval: 10s
    filters:
    # this is a relative value - not true lux - adjust as needed for your install
      - lambda: |-
          return (2800/x) - 2700;

binary_sensor:
  # RCWL-0516 Motion
  - platform: gpio
    pin: D6
    name: "Garage Motion Front"
    device_class: motion
    
  # Photoresistor module DO light level
  - platform: gpio
    pin: D7
    name: "Garage Digital Light Level"

# RGB LED
light:
  - platform: rgb
    id: light_1
    name: "Garage Sensor LED2"
    default_transition_length: 100ms
    red: output_component1
    green: output_component2
    blue: output_component3

# LED output
output:
  - platform: esp8266_pwm
    id: output_component1
    pin: D3
    max_power: 80%
  - platform: esp8266_pwm
    id: output_component2
    pin: D4
    max_power: 80%
  - platform: esp8266_pwm
    id: output_component3
    pin: D5
    max_power: 80%
  
switch:
  - platform: restart
    name: "Garage Multisensor Restart"