Skip to content

Instantly share code, notes, and snippets.

@RichardBronosky

RichardBronosky/rpi-3-1.txt

Created March 17, 2024 10:05
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save RichardBronosky/60132e3fa91df43d649915d7811ffa52 to your computer and use it in GitHub Desktop.
Save RichardBronosky/60132e3fa91df43d649915d7811ffa52 to your computer and use it in GitHub Desktop.
Download ZIP
Arducam 16MP Autofocus install failure
Raw
rpi-3-1.txt
bruno@rpi-3-1:~ $ chmod +x ardu-test.sh
bruno@rpi-3-1:~ $ cat ardu-test.sh
#! /usr/bin/env bash
set -x
uname -a
sudo cat /etc/os-release
sudo cat /proc/meminfo
sudo cat /boot/config.txt
sudo dmesg
sudo libcamera-still --list-cameras
sudo libcamera-still -t 500 -n -o ~/Pictures/"test-$(date '+%Y-%m-%dT%H:%M:%S%Z').jpg"
bruno@rpi-3-1:~ $ ./ardu-test.sh
+ uname -a
Linux rpi-3-1 6.1.21-v7+ #1642 SMP Mon Apr 3 17:20:52 BST 2023 armv7l GNU/Linux
+ sudo cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
+ sudo cat /proc/meminfo
MemTotal: 944092 kB
MemFree: 799040 kB
MemAvailable: 836760 kB
Buffers: 11396 kB
Cached: 66500 kB
SwapCached: 0 kB
Active: 34616 kB
Inactive: 60584 kB
Active(anon): 692 kB
Inactive(anon): 17572 kB
Active(file): 33924 kB
Inactive(file): 43012 kB
Unevictable: 16 kB
Mlocked: 16 kB
SwapTotal: 102396 kB
SwapFree: 102396 kB
Zswap: 0 kB
Zswapped: 0 kB
Dirty: 676 kB
Writeback: 0 kB
AnonPages: 17352 kB
Mapped: 37304 kB
Shmem: 960 kB
KReclaimable: 11680 kB
Slab: 25780 kB
SReclaimable: 11680 kB
SUnreclaim: 14100 kB
KernelStack: 1160 kB
PageTables: 1124 kB
SecPageTables: 0 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 574440 kB
Committed_AS: 175696 kB
VmallocTotal: 1114112 kB
VmallocUsed: 6984 kB
VmallocChunk: 0 kB
Percpu: 416 kB
CmaTotal: 262144 kB
CmaFree: 259796 kB
+ sudo cat /boot/config.txt
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Uncomment this to enable infrared communication.
#dtoverlay=gpio-ir,gpio_pin=17
#dtoverlay=gpio-ir-tx,gpio_pin=18
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
# Automatically load overlays for detected cameras
camera_auto_detect=1
# Automatically load overlays for detected DSI displays
display_auto_detect=1
# Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d
max_framebuffers=2
# Disable compensation for displays with overscan
disable_overscan=1
[cm4]
# Enable host mode on the 2711 built-in XHCI USB controller.
# This line should be removed if the legacy DWC2 controller is required
# (e.g. for USB device mode) or if USB support is not required.
otg_mode=1
[all]
[pi4]
# Run as fast as firmware / board allows
arm_boost=1
[all]
#dtoverlay=imx519
dtparam=i2c_vc=on
dtparam=i2c_arm=on
+ sudo dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.1.21-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP Mon Apr 3 17:20:52 BST 2023
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] random: crng init done
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x1ec00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] percpu: Embedded 17 pages/cpu s36884 r8192 d24556 u69632
[ 0.000000] pcpu-alloc: s36884 r8192 d24556 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4685c4ac-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=US
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 680924K/970752K available (10240K kernel code, 1452K rwdata, 2900K rodata, 1024K init, 613K bss, 27684K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 34800 entries in 103 pages
[ 0.000000] ftrace: allocated 102 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000019] Switching to timer-based delay loop, resolution 52ns
[ 0.000388] Console: colour dummy device 80x30
[ 0.001014] printk: console [tty1] enabled
[ 0.001076] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.001123] pid_max: default: 32768 minimum: 301
[ 0.001285] LSM: Security Framework initializing
[ 0.001503] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001546] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002718] cgroup: Disabling memory control group subsystem
[ 0.002977] CPU: Testing write buffer coherency: ok
[ 0.003411] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.004276] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.004313] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.004441] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.004602] Setting up static identity map for 0x100000 - 0x10003c
[ 0.004759] rcu: Hierarchical SRCU implementation.
[ 0.004783] rcu: Max phase no-delay instances is 1000.
[ 0.005509] smp: Bringing up secondary CPUs ...
[ 0.006444] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007400] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.008275] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.008376] smp: Brought up 1 node, 4 CPUs
[ 0.008456] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.008483] CPU: All CPU(s) started in HYP mode.
[ 0.008502] CPU: Virtualization extensions available.
[ 0.009250] devtmpfs: initialized
[ 0.024319] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.024550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.024603] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.034787] pinctrl core: initialized pinctrl subsystem
[ 0.036006] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.039268] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.044360] audit: initializing netlink subsys (disabled)
[ 0.044614] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.045237] thermal_sys: Registered thermal governor 'step_wise'
[ 0.046238] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.046292] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.046549] Serial: AMBA PL011 UART driver
[ 0.052641] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.070070] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start
[ 0.080083] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54
[ 0.122735] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.128399] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.130098] SCSI subsystem initialized
[ 0.130355] usbcore: registered new interface driver usbfs
[ 0.130435] usbcore: registered new interface driver hub
[ 0.130503] usbcore: registered new device driver usb
[ 0.130753] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.130941] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.131226] pps_core: LinuxPPS API ver. 1 registered
[ 0.131251] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.131300] PTP clock support registered
[ 2.010827] clocksource: Switched to clocksource arch_sys_counter
[ 2.108485] VFS: Disk quotas dquot_6.6.0
[ 2.108607] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.108779] FS-Cache: Loaded
[ 2.109066] CacheFiles: Loaded
[ 2.117588] NET: Registered PF_INET protocol family
[ 2.117896] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.120615] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 2.120676] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 2.120722] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 2.120895] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 2.121246] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.121403] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 2.121474] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 2.121709] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.122249] RPC: Registered named UNIX socket transport module.
[ 2.122280] RPC: Registered udp transport module.
[ 2.122302] RPC: Registered tcp transport module.
[ 2.122322] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.124052] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 2.127174] Initialise system trusted keyrings
[ 2.127434] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 2.136667] zbud: loaded
[ 2.139086] NFS: Registering the id_resolver key type
[ 2.139140] Key type id_resolver registered
[ 2.139163] Key type id_legacy registered
[ 2.139300] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.139329] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 2.140633] Key type asymmetric registered
[ 2.140661] Asymmetric key parser 'x509' registered
[ 2.140900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.140938] io scheduler mq-deadline registered
[ 2.140962] io scheduler kyber registered
[ 2.145989] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes
[ 2.146053] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880
[ 2.150775] Console: switching to colour frame buffer device 90x30
[ 2.157388] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered!
[ 2.164638] bcm2835-rng 3f104000.rng: hwrng registered
[ 2.167567] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 2.173457] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 2.187164] brd: module loaded
[ 2.197144] loop: module loaded
[ 2.200316] Loading iSCSI transport class v2.0-870.
[ 2.204352] usbcore: registered new interface driver lan78xx
[ 2.207017] usbcore: registered new interface driver smsc95xx
[ 2.209612] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.940293] Core Release: 2.80a
[ 2.942833] Setting default values for core params
[ 2.945332] Finished setting default values for core params
[ 3.148082] Using Buffer DMA mode
[ 3.150569] Periodic Transfer Interrupt Enhancement - disabled
[ 3.153099] Multiprocessor Interrupt Enhancement - disabled
[ 3.155573] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 3.158065] Dedicated Tx FIFOs mode
[ 3.161063] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = 9ed04000 dma = 0xded04000 len=9024
[ 3.168269] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 3.179503] dwc_otg: Microframe scheduler enabled
[ 3.179617] WARN::hcd_init_fiq:457: FIQ on core 1
[ 3.183694] WARN::hcd_init_fiq:458: FIQ ASM at 807c4360 length 36
[ 3.187676] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
[ 3.191759] dwc_otg 3f980000.usb: DWC OTG Controller
[ 3.193907] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 3.196119] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
[ 3.198284] Init: Port Power? op_state=1
[ 3.200387] Init: Power Port (0)
[ 3.202681] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 3.206942] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.209203] usb usb1: Product: DWC OTG Controller
[ 3.211439] usb usb1: Manufacturer: Linux 6.1.21-v7+ dwc_otg_hcd
[ 3.213704] usb usb1: SerialNumber: 3f980000.usb
[ 3.216565] hub 1-0:1.0: USB hub found
[ 3.218798] hub 1-0:1.0: 1 port detected
[ 3.221557] dwc_otg: FIQ enabled
[ 3.221567] dwc_otg: NAK holdoff enabled
[ 3.221576] dwc_otg: FIQ split-transaction FSM enabled
[ 3.221591] Module dwc_common_port init
[ 3.221875] usbcore: registered new interface driver usb-storage
[ 3.224225] mousedev: PS/2 mouse device common for all mice
[ 3.228899] sdhci: Secure Digital Host Controller Interface driver
[ 3.231175] sdhci: Copyright(c) Pierre Ossman
[ 3.233671] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.237834] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.240435] hid: raw HID events driver (C) Jiri Kosina
[ 3.242985] usbcore: registered new interface driver usbhid
[ 3.245273] usbhid: USB HID core driver
[ 3.251662] Initializing XFRM netlink socket
[ 3.253973] NET: Registered PF_PACKET protocol family
[ 3.256299] Key type dns_resolver registered
[ 3.259326] Registering SWP/SWPB emulation handler
[ 3.262211] registered taskstats version 1
[ 3.264417] Loading compiled-in X.509 certificates
[ 3.267373] Key type .fscrypt registered
[ 3.269551] Key type fscrypt-provisioning registered
[ 3.283064] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 3.285356] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
[ 3.291602] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 3.294063] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 3.297563] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 3.299825] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 3.328962] sdhost: log_buf @ f905ccc4 (ded07000)
[ 3.350937] Indeed it is in host mode hprt0 = 00021501
[ 3.380841] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 3.385558] of_cfs_init
[ 3.387905] of_cfs_init: OK
[ 3.391295] Waiting for root device PARTUUID=4685c4ac-02...
[ 3.417584] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.423095] mmc0: new high speed SDXC card at address 59b4
[ 3.426182] mmcblk0: mmc0:59b4 SMTC 58.2 GiB
[ 3.431612] mmcblk0: p1 p2
[ 3.434491] mmcblk0: mmc0:59b4 SMTC 58.2 GiB
[ 3.480690] mmc1: new high speed SDIO card at address 0001
[ 3.493678] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 3.498357] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 3.508713] devtmpfs: mounted
[ 3.517081] Freeing unused kernel image (initmem) memory: 1024K
[ 3.520096] Run /sbin/init as init process
[ 3.522579] with arguments:
[ 3.522587] /sbin/init
[ 3.522595] with environment:
[ 3.522602] HOME=/
[ 3.522609] TERM=linux
[ 3.560885] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.563565] Indeed it is in host mode hprt0 = 00001101
[ 3.801154] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 3.806104] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.809367] hub 1-1:1.0: USB hub found
[ 3.812101] hub 1-1:1.0: 5 ports detected
[ 4.031411] systemd[1]: System time before build time, advancing clock.
[ 4.130890] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 4.261212] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 4.266462] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.272369] smsc95xx v2.0.0
[ 4.292298] NET: Registered PF_INET6 protocol family
[ 4.296398] Segment Routing with IPv6
[ 4.299061] In-situ OAM (IOAM) with IPv6
[ 4.383335] systemd[1]: systemd 247.3-7+rpi1+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 4.393118] systemd[1]: Detected architecture arm.
[ 4.421361] systemd[1]: Set hostname to <rpi-3-1>.
[ 4.425959] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=199)
[ 4.439243] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:6a:14:a7
[ 5.495237] systemd[1]: Queued start job for default target Multi-User System.
[ 5.564811] systemd[1]: Created slice system-getty.slice.
[ 5.572676] systemd[1]: Created slice system-modprobe.slice.
[ 5.580043] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.587072] systemd[1]: Created slice User and Session Slice.
[ 5.593529] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.600123] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.607668] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.617540] systemd[1]: Reached target Local Encrypted Volumes.
[ 5.624616] systemd[1]: Reached target Paths.
[ 5.631322] systemd[1]: Reached target Slices.
[ 5.637787] systemd[1]: Reached target Swap.
[ 5.645232] systemd[1]: Listening on Syslog Socket.
[ 5.651964] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.658415] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.665793] systemd[1]: Listening on Journal Audit Socket.
[ 5.672662] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.679637] systemd[1]: Listening on Journal Socket.
[ 5.690028] systemd[1]: Listening on udev Control Socket.
[ 5.696667] systemd[1]: Listening on udev Kernel Socket.
[ 5.703480] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 5.751291] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.762132] systemd[1]: Mounting RPC Pipe File System...
[ 5.774197] systemd[1]: Mounting Kernel Debug File System...
[ 5.785814] systemd[1]: Mounting Kernel Trace File System...
[ 5.793101] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 5.806174] systemd[1]: Starting Restore / save the current clock...
[ 5.818417] systemd[1]: Starting Set the console keyboard layout...
[ 5.831581] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 5.849158] systemd[1]: Starting Load Kernel Module configfs...
[ 5.862625] systemd[1]: Starting Load Kernel Module drm...
[ 5.875536] systemd[1]: Starting Load Kernel Module fuse...
[ 5.895454] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 5.907702] systemd[1]: Starting File System Check on Root Device...
[ 5.928981] systemd[1]: Starting Journal Service...
[ 5.955479] systemd[1]: Starting Load Kernel Modules...
[ 5.980715] systemd[1]: Starting Coldplug All udev Devices...
[ 5.986814] fuse: init (API version 7.37)
[ 6.032518] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.039976] systemd[1]: Mounted RPC Pipe File System.
[ 6.047341] systemd[1]: Mounted Kernel Debug File System.
[ 6.054322] systemd[1]: Mounted Kernel Trace File System.
[ 6.062176] systemd[1]: Finished Restore / save the current clock.
[ 6.067676] i2c_dev: i2c /dev entries driver
[ 6.073975] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 6.085396] systemd[1]: modprobe@configfs.service: Succeeded.
[ 6.089356] systemd[1]: Finished Load Kernel Module configfs.
[ 6.116269] systemd[1]: modprobe@fuse.service: Succeeded.
[ 6.142278] systemd[1]: Finished Load Kernel Module fuse.
[ 6.150589] systemd[1]: Finished Load Kernel Modules.
[ 6.225259] systemd[1]: Mounting FUSE Control File System...
[ 6.236262] systemd[1]: Mounting Kernel Configuration File System...
[ 6.248981] systemd[1]: Started File System Check Daemon to report status.
[ 6.281501] systemd[1]: Starting Apply Kernel Variables...
[ 6.341265] systemd[1]: modprobe@drm.service: Succeeded.
[ 6.345068] systemd[1]: Finished Load Kernel Module drm.
[ 6.363096] systemd[1]: Mounted FUSE Control File System.
[ 6.367059] systemd[1]: Mounted Kernel Configuration File System.
[ 6.382231] systemd[1]: Finished Apply Kernel Variables.
[ 6.385923] systemd[1]: Started Journal Service.
[ 6.669378] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ 6.745516] systemd-journald[139]: Received client request to flush runtime journal.
[ 6.778281] systemd-journald[139]: File /var/log/journal/78eed9a4e24e4afd934b9b9e01371eb0/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 8.656319] mc: Linux media interface: v0.10
[ 8.725360] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.727818] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 8.727852] [vc_sm_connected_init]: start
[ 8.741251] [vc_sm_connected_init]: installed successfully
[ 8.891317] videodev: Linux video capture interface: v2.00
[ 8.930143] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.942713] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 9.053028] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.054971] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.094710] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.106132] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.117036] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.122530] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 9.122712] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 9.151428] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 9.151491] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 9.155287] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 9.155342] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 9.158318] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 9.158389] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 9.172282] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 9.172354] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 9.174408] i2c i2c-11: Added multiplexed i2c bus 0
[ 9.181929] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.196268] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 9.198050] i2c i2c-11: Added multiplexed i2c bus 10
[ 9.257715] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 9.263107] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 9.263511] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 9.263547] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 9.263569] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 9.263587] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 9.263603] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 9.271085] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 9.271596] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 9.271985] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 9.272319] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 9.272361] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 9.272383] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 9.272400] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 9.272416] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 9.272633] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 9.558872] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.693539] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.719331] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 9.905034] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 9.911319] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 9.911964] usbcore: registered new interface driver brcmfmac
[ 10.170054] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897
[ 10.171388] Console: switching to colour dummy device 80x30
[ 10.186148] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 10.210536] Registered IR keymap rc-cec
[ 10.211717] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0
[ 10.212027] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0
[ 10.284172] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 10.284756] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[ 10.285228] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 10.285668] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 10.286125] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 10.286488] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 10.328260] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 10.330726] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[ 11.333705] uart-pl011 3f201000.serial: no DMA platform data
[ 11.352798] 8021q: 802.1Q VLAN Support v1.8
[ 11.541060] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 11.984145] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 12.303720] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 12.307805] smsc95xx 1-1.1:1.0 eth0: Link is Down
[ 13.267622] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.064850] Bluetooth: Core ver 2.22
[ 16.064952] NET: Registered PF_BLUETOOTH protocol family
[ 16.064958] Bluetooth: HCI device and connection manager initialized
[ 16.064977] Bluetooth: HCI socket layer initialized
[ 16.064987] Bluetooth: L2CAP socket layer initialized
[ 16.065003] Bluetooth: SCO socket layer initialized
[ 16.078967] Bluetooth: HCI UART driver ver 2.3
[ 16.078990] Bluetooth: HCI UART protocol H4 registered
[ 16.079065] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 16.079210] Bluetooth: HCI UART protocol Broadcom registered
[ 16.582024] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.582045] Bluetooth: BNEP filters: protocol multicast
[ 16.582061] Bluetooth: BNEP socket layer initialized
[ 16.588542] Bluetooth: MGMT ver 1.22
[ 16.602073] NET: Registered PF_ALG protocol family
[ 16.625378] cryptd: max_cpu_qlen set to 1000
+ sudo libcamera-still --list-cameras
No cameras available!
++ date +%Y-%m-%dT%H:%M:%S%Z
+ sudo libcamera-still -t 500 -n -o /home/bruno/Pictures/test-2024-03-17T04:24:35CDT.jpg
[0:00:53.587025500] [680] INFO Camera camera_manager.cpp:297 libcamera v0.0.0+4367-ad9428b4
ERROR: *** no cameras available ***
bruno@rpi-3-1:~ $
Raw
rpi-4-8-1.txt
➜ ~ chmod +x ardu-test.sh
➜ ~ cat ardu-test.sh
#! /usr/bin/env bash
set -x
uname -a
sudo cat /etc/os-release
sudo cat /proc/meminfo
sudo cat /boot/config.txt
sudo dmesg
sudo libcamera-still --list-cameras
sudo libcamera-still -t 500 -n -o ~/Pictures/"test-$(date '+%Y-%m-%dT%H:%M:%S%Z').jpg"
➜ ~ ./ardu-test.sh
+ uname -a
Linux rpi4-8-1 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux
+ sudo cat /etc/os-release
PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"
+ sudo cat /proc/meminfo
MemTotal: 3885392 kB
MemFree: 3594916 kB
MemAvailable: 3724316 kB
Buffers: 18908 kB
Cached: 152828 kB
SwapCached: 0 kB
Active: 156820 kB
Inactive: 40056 kB
Active(anon): 25052 kB
Inactive(anon): 1300 kB
Active(file): 131768 kB
Inactive(file): 38756 kB
Unevictable: 16 kB
Mlocked: 16 kB
SwapTotal: 102396 kB
SwapFree: 102396 kB
Zswap: 0 kB
Zswapped: 0 kB
Dirty: 4 kB
Writeback: 0 kB
AnonPages: 25056 kB
Mapped: 43560 kB
Shmem: 1216 kB
KReclaimable: 31244 kB
Slab: 53836 kB
SReclaimable: 31244 kB
SUnreclaim: 22592 kB
KernelStack: 2616 kB
PageTables: 1592 kB
SecPageTables: 0 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 2045092 kB
Committed_AS: 188328 kB
VmallocTotal: 259653632 kB
VmallocUsed: 10476 kB
VmallocChunk: 0 kB
Percpu: 656 kB
CmaTotal: 524288 kB
CmaFree: 513236 kB
+ sudo cat /boot/config.txt
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=spi=on
# Uncomment this to enable infrared communication.
#dtoverlay=gpio-ir,gpio_pin=17
#dtoverlay=gpio-ir-tx,gpio_pin=18
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
# Automatically load overlays for detected cameras
camera_auto_detect=1
# Automatically load overlays for detected DSI displays
display_auto_detect=1
# Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d
max_framebuffers=2
# Run in 64-bit mode
arm_64bit=1
# Disable compensation for displays with overscan
#disable_overscan=1
[cm4]
# Enable host mode on the 2711 built-in XHCI USB controller.
# This line should be removed if the legacy DWC2 controller is required
# (e.g. for USB device mode) or if USB support is not required.
otg_mode=1
[all]
[pi4]
# Run as fast as firmware / board allows
arm_boost=1
[all]
# from: https://docs.arducam.com/Raspberry-Pi-Camera/Native-camera/Quick-Start-Guide/#software-guide-for-imx519-autofocus-camera
dtoverlay=imx519
# from: https://www.raspberrypi.com/tutorials/plug-and-play-raspberry-pi-usb-webcam/
dtoverlay=dwc2,dr_mode=otg
+ sudo dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.1.21-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000000ec00000, size 512 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 29 pages/cpu s78504 r8192 d32088 u118784
[ 0.000000] pcpu-alloc: s78504 r8192 d32088 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:1D:06:9B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=07de6cf4-02 rootfstype=ext4 fsck.repair=yes rootwait modules-load=dwc2,g_ether
[ 0.000000] Unknown kernel command line parameters "modules-load=dwc2,g_ether", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 3356944K/4050944K available (11776K kernel code, 2106K rwdata, 3688K rodata, 4160K init, 1077K bss, 169712K reserved, 524288K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 39744 entries in 156 pages
[ 0.000000] ftrace: allocated 156 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000327] Console: colour dummy device 80x25
[ 0.000944] printk: console [tty1] enabled
[ 0.001013] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.001053] pid_max: default: 32768 minimum: 301
[ 0.001183] LSM: Security Framework initializing
[ 0.001416] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001507] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002827] cgroup: Disabling memory control group subsystem
[ 0.005112] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.005149] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.005342] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.005535] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.006019] rcu: Hierarchical SRCU implementation.
[ 0.006044] rcu: Max phase no-delay instances is 1000.
[ 0.007367] EFI services will not be available.
[ 0.008001] smp: Bringing up secondary CPUs ...
[ 0.009104] Detected PIPT I-cache on CPU1
[ 0.009260] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.010417] Detected PIPT I-cache on CPU2
[ 0.010537] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.011645] Detected PIPT I-cache on CPU3
[ 0.011772] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.011961] smp: Brought up 1 node, 4 CPUs
[ 0.012051] SMP: Total of 4 processors activated.
[ 0.012073] CPU features: detected: 32-bit EL0 Support
[ 0.012092] CPU features: detected: 32-bit EL1 Support
[ 0.012113] CPU features: detected: CRC32 instructions
[ 0.012259] CPU: All CPU(s) started at EL2
[ 0.012295] alternatives: applying system-wide alternatives
[ 0.014160] devtmpfs: initialized
[ 0.026298] Enabled cp15_barrier support
[ 0.026365] Enabled setend support
[ 0.026591] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.026643] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.039868] pinctrl core: initialized pinctrl subsystem
[ 0.040810] DMI not present or invalid.
[ 0.041525] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.045063] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.045383] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.046342] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.046451] audit: initializing netlink subsys (disabled)
[ 0.046737] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[ 0.047336] thermal_sys: Registered thermal governor 'step_wise'
[ 0.047428] cpuidle: using governor menu
[ 0.047831] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.048040] ASID allocator initialised with 32768 entries
[ 0.048244] Serial: AMBA PL011 UART driver
[ 0.063707] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.080154] platform fe801000.csi: Fixed dependency cycle(s) with /soc/i2c0mux/i2c@1/imx519@1a
[ 0.088324] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:50:39, variant start
[ 0.092339] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54
[ 0.108742] KASLR enabled
[ 0.142683] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.148579] SCSI subsystem initialized
[ 0.148851] usbcore: registered new interface driver usbfs
[ 0.148925] usbcore: registered new interface driver hub
[ 0.149005] usbcore: registered new device driver usb
[ 0.149434] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.149687] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.150068] pps_core: LinuxPPS API ver. 1 registered
[ 0.150093] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.150135] PTP clock support registered
[ 0.151296] vgaarb: loaded
[ 0.152083] clocksource: Switched to clocksource arch_sys_counter
[ 0.152755] VFS: Disk quotas dquot_6.6.0
[ 0.152850] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.153051] FS-Cache: Loaded
[ 0.153238] CacheFiles: Loaded
[ 0.164190] NET: Registered PF_INET protocol family
[ 0.165089] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.170068] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.170151] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.170194] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.170439] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.171434] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.171703] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.171813] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.172214] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.173088] RPC: Registered named UNIX socket transport module.
[ 0.173119] RPC: Registered udp transport module.
[ 0.173139] RPC: Registered tcp transport module.
[ 0.173158] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.173193] PCI: CLS 0 bytes, default 64
[ 0.175827] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.176281] kvm [1]: IPA Size Limit: 44 bits
[ 0.177624] kvm [1]: vgic interrupt IRQ9
[ 0.177874] kvm [1]: Hyp mode initialized successfully
[ 1.318605] Initialise system trusted keyrings
[ 1.319095] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.326725] zbud: loaded
[ 1.329650] NFS: Registering the id_resolver key type
[ 1.329712] Key type id_resolver registered
[ 1.329733] Key type id_legacy registered
[ 1.329872] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.329901] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.331366] Key type asymmetric registered
[ 1.331399] Asymmetric key parser 'x509' registered
[ 1.331491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.331773] io scheduler mq-deadline registered
[ 1.331801] io scheduler kyber registered
[ 1.333687] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 27)
[ 1.342732] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.342800] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.342906] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.343005] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[ 1.344028] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.344112] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.344144] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.344233] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.344504] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.348592] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.348877] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
[ 1.349072] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
[ 1.349198] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
[ 1.414177] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.414358] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.414495] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.414989] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.415727] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.415787] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.415823] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.415880] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.415912] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.429857] iproc-rng200 fe104000.rng: hwrng registered
[ 1.430473] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.432153] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.445381] brd: module loaded
[ 1.454307] loop: module loaded
[ 1.455223] Loading iSCSI transport class v2.0-870.
[ 1.460790] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.520245] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.521422] usbcore: registered new interface driver r8152
[ 1.521511] usbcore: registered new interface driver lan78xx
[ 1.521598] usbcore: registered new interface driver smsc95xx
[ 1.569094] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.569297] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.569341] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.570144] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000e40000000890
[ 1.571224] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.571259] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.571295] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.571720] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.571756] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.571784] usb usb1: Product: xHCI Host Controller
[ 1.571807] usb usb1: Manufacturer: Linux 6.1.21-v8+ xhci-hcd
[ 1.571829] usb usb1: SerialNumber: 0000:01:00.0
[ 1.572617] hub 1-0:1.0: USB hub found
[ 1.572699] hub 1-0:1.0: 1 port detected
[ 1.573694] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 1.573730] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.573758] usb usb2: Product: xHCI Host Controller
[ 1.573780] usb usb2: Manufacturer: Linux 6.1.21-v8+ xhci-hcd
[ 1.573802] usb usb2: SerialNumber: 0000:01:00.0
[ 1.574484] hub 2-0:1.0: USB hub found
[ 1.574596] hub 2-0:1.0: 4 ports detected
[ 1.576480] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.576871] dwc_otg: FIQ enabled
[ 1.576883] dwc_otg: NAK holdoff enabled
[ 1.576893] dwc_otg: FIQ split-transaction FSM enabled
[ 1.576909] Module dwc_common_port init
[ 1.577474] usbcore: registered new interface driver uas
[ 1.577590] usbcore: registered new interface driver usb-storage
[ 1.577862] mousedev: PS/2 mouse device common for all mice
[ 1.584669] sdhci: Secure Digital Host Controller Interface driver
[ 1.584709] sdhci: Copyright(c) Pierre Ossman
[ 1.585461] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.589210] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.589580] hid: raw HID events driver (C) Jiri Kosina
[ 1.589810] usbcore: registered new interface driver usbhid
[ 1.589836] usbhid: USB HID core driver
[ 1.599070] NET: Registered PF_PACKET protocol family
[ 1.599240] Key type dns_resolver registered
[ 1.600651] registered taskstats version 1
[ 1.600745] Loading compiled-in X.509 certificates
[ 1.601669] Key type .fscrypt registered
[ 1.601698] Key type fscrypt-provisioning registered
[ 1.617758] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.618519] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.618722] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[ 1.627963] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.628542] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.629870] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.629904] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.660855] of_cfs_init
[ 1.661001] of_cfs_init: OK
[ 1.692702] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.693087] Waiting for root device PARTUUID=07de6cf4-02...
[ 1.746896] mmc1: new high speed SDIO card at address 0001
[ 1.804174] mmc0: new ultra high speed DDR50 SDXC card at address 0001
[ 1.805211] mmcblk0: mmc0:0001 SD32G 58.2 GiB
[ 1.808672] mmcblk0: p1 p2
[ 1.809285] mmcblk0: mmc0:0001 SD32G 58.2 GiB
[ 1.828130] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.835853] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 1.835966] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.844330] devtmpfs: mounted
[ 1.854036] Freeing unused kernel memory: 4160K
[ 1.854256] Run /sbin/init as init process
[ 1.854278] with arguments:
[ 1.854287] /sbin/init
[ 1.854297] with environment:
[ 1.854305] HOME=/
[ 1.854315] TERM=linux
[ 1.854324] modules-load=dwc2,g_ether
[ 1.986714] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.986775] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.986803] usb 1-1: Product: USB2.0 Hub
[ 1.988793] hub 1-1:1.0: USB hub found
[ 1.989197] hub 1-1:1.0: 4 ports detected
[ 2.270877] systemd[1]: System time before build time, advancing clock.
[ 2.284128] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd
[ 2.390292] usb 1-1.3: New USB device found, idVendor=1997, idProduct=2433, bcdDevice= 1.02
[ 2.390355] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.390385] usb 1-1.3: Product: mini keyboard
[ 2.390408] usb 1-1.3: Manufacturer:
[ 2.400953] input: mini keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1997:2433.0001/input/input0
[ 2.461142] hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [ mini keyboard] on usb-0000:01:00.0-1.3/input0
[ 2.464654] NET: Registered PF_INET6 protocol family
[ 2.466635] Segment Routing with IPv6
[ 2.466704] In-situ OAM (IOAM) with IPv6
[ 2.467939] input: mini keyboard Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1997:2433.0002/input/input1
[ 2.468565] input: mini keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1997:2433.0002/input/input2
[ 2.528623] input: mini keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1997:2433.0002/input/input3
[ 2.529012] hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [ mini keyboard] on usb-0000:01:00.0-1.3/input1
[ 2.541371] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.542434] systemd[1]: Detected architecture arm64.
[ 2.554413] systemd[1]: Set hostname to <rpi4-8-1>.
[ 3.279475] systemd[1]: Queued start job for default target Multi-User System.
[ 3.297792] systemd[1]: Created slice system-getty.slice.
[ 3.299600] systemd[1]: Created slice system-modprobe.slice.
[ 3.301065] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.302183] systemd[1]: Created slice User and Session Slice.
[ 3.303005] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.303789] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.305199] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.305731] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.306267] systemd[1]: Reached target Paths.
[ 3.306686] systemd[1]: Reached target Slices.
[ 3.307086] systemd[1]: Reached target Swap.
[ 3.310934] systemd[1]: Listening on Syslog Socket.
[ 3.317429] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.318260] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.319837] systemd[1]: Listening on Journal Audit Socket.
[ 3.321053] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.322318] systemd[1]: Listening on Journal Socket.
[ 3.324678] systemd[1]: Listening on udev Control Socket.
[ 3.325805] systemd[1]: Listening on udev Kernel Socket.
[ 3.327059] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 3.352603] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.358129] systemd[1]: Mounting RPC Pipe File System...
[ 3.364276] systemd[1]: Mounting Kernel Debug File System...
[ 3.370490] systemd[1]: Mounting Kernel Trace File System...
[ 3.371535] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 3.380745] systemd[1]: Starting Restore / save the current clock...
[ 3.390123] systemd[1]: Starting Set the console keyboard layout...
[ 3.396732] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.402759] systemd[1]: Starting Load Kernel Module configfs...
[ 3.409694] systemd[1]: Starting Load Kernel Module drm...
[ 3.416698] systemd[1]: Starting Load Kernel Module fuse...
[ 3.422921] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.428681] systemd[1]: Starting File System Check on Root Device...
[ 3.438587] systemd[1]: Starting Journal Service...
[ 3.452351] systemd[1]: Starting Load Kernel Modules...
[ 3.458411] systemd[1]: Starting Coldplug All udev Devices...
[ 3.496898] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.502903] systemd[1]: Mounted RPC Pipe File System.
[ 3.504384] systemd[1]: Mounted Kernel Debug File System.
[ 3.505724] systemd[1]: Mounted Kernel Trace File System.
[ 3.508684] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.511627] systemd[1]: modprobe@configfs.service: Succeeded.
[ 3.516130] fuse: init (API version 7.37)
[ 3.516503] systemd[1]: Finished Load Kernel Module configfs.
[ 3.520951] systemd[1]: Finished Restore / save the current clock.
[ 3.531044] systemd[1]: modprobe@fuse.service: Succeeded.
[ 3.534757] systemd[1]: Finished Load Kernel Module fuse.
[ 3.573103] systemd[1]: Mounting FUSE Control File System...
[ 3.589520] systemd[1]: Mounting Kernel Configuration File System...
[ 3.596878] systemd[1]: Started File System Check Daemon to report status.
[ 3.612808] systemd[1]: Mounted FUSE Control File System.
[ 3.613889] systemd[1]: Mounted Kernel Configuration File System.
[ 3.614718] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[ 3.616507] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[ 3.625929] systemd[1]: modprobe@drm.service: Succeeded.
[ 3.627504] systemd[1]: Finished Load Kernel Module drm.
[ 3.731554] systemd[1]: Finished File System Check on Root Device.
[ 3.737487] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.828276] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[ 3.828701] dwc2 fe980000.usb: DWC OTG Controller
[ 3.828751] dwc2 fe980000.usb: new USB bus registered, assigned bus number 3
[ 3.828817] dwc2 fe980000.usb: irq 38, io mem 0xfe980000
[ 3.829299] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 3.829341] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.829369] usb usb3: Product: DWC OTG Controller
[ 3.829392] usb usb3: Manufacturer: Linux 6.1.21-v8+ dwc2_hsotg
[ 3.829415] usb usb3: SerialNumber: fe980000.usb
[ 3.830539] hub 3-0:1.0: USB hub found
[ 3.830660] hub 3-0:1.0: 1 port detected
[ 3.872439] systemd[1]: Started Journal Service.
[ 3.907109] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ 3.919491] using random self ethernet address
[ 3.919548] using random host ethernet address
[ 3.920666] usb0: HOST MAC 4e:0e:b2:16:74:20
[ 3.920713] usb0: MAC ee:34:6e:e7:94:bb
[ 3.920796] using random self ethernet address
[ 3.920822] using random host ethernet address
[ 3.920912] g_ether gadget.0: Ethernet Gadget, version: Memorial Day 2008
[ 3.920939] g_ether gadget.0: g_ether ready
[ 3.920968] dwc2 fe980000.usb: bound driver g_ether
[ 4.017976] systemd-journald[144]: Received client request to flush runtime journal.
[ 4.035822] systemd-journald[144]: File /var/log/journal/f15d288b72ec473d9ed320ce3ca80da9/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.043522] mc: Linux media interface: v0.10
[ 5.208855] videodev: Linux video capture interface: v2.00
[ 5.337681] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 5.390637] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.395456] rpivid feb10000.codec: Device registered as /dev/video19
[ 5.921213] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.946555] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.951165] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.956039] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 5.956124] [vc_sm_connected_init]: start
[ 5.969505] [vc_sm_connected_init]: installed successfully
[ 5.981872] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.993460] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 6.009872] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 6.015491] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.019211] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.025079] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.051972] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.072146] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.081270] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 6.082815] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.120308] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 6.126184] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 6.167472] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 6.167540] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 6.171211] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 6.171279] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 6.188521] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 6.188582] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 6.201526] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 6.202359] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 6.203085] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 6.203662] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 6.203695] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 6.203718] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 6.203736] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 6.203753] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 6.214796] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 6.214920] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 6.215849] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 6.218852] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 6.218907] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 6.219465] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 6.223201] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 6.228258] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 6.286042] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 6.286098] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 6.286126] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 6.286155] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 6.286179] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 6.292148] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 6.299244] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 6.309063] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 6.318944] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 6.319869] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 6.324899] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 6.349199] Registered IR keymap rc-cec
[ 6.364693] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 6.399088] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input4
[ 6.404659] i2c i2c-22: Added multiplexed i2c bus 0
[ 6.464454] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.468034] i2c i2c-22: Added multiplexed i2c bus 10
[ 6.504293] Registered IR keymap rc-cec
[ 6.527930] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 6.551591] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input5
[ 6.731932] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.743973] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 6.750050] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.770308] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.797043] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.797439] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.797982] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.874723] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 6.875437] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 7.461525] uart-pl011 fe201000.serial: no DMA platform data
[ 7.626979] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.671297] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 7.675598] 8021q: 802.1Q VLAN Support v1.8
[ 7.720693] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.749338] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 7.880657] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 7.883050] bcmgenet fd580000.ethernet eth0: Link is Down
[ 7.924439] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 7.939770] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.941051] usbcore: registered new interface driver brcmfmac
[ 8.040746] ak7375 10-000c: supply vio not found, using dummy regulator
[ 8.257800] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 8.259591] imx519 10-001a: Device found is imx519
[ 8.261979] imx519 10-001a: Consider updating driver imx519 to match on endpoints
[ 8.664864] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 14.512942] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.402948] Bluetooth: Core ver 2.22
[ 15.403077] NET: Registered PF_BLUETOOTH protocol family
[ 15.403086] Bluetooth: HCI device and connection manager initialized
[ 15.403110] Bluetooth: HCI socket layer initialized
[ 15.403123] Bluetooth: L2CAP socket layer initialized
[ 15.403147] Bluetooth: SCO socket layer initialized
[ 15.416466] Bluetooth: HCI UART driver ver 2.3
[ 15.416498] Bluetooth: HCI UART protocol H4 registered
[ 15.416603] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 15.416896] Bluetooth: HCI UART protocol Broadcom registered
[ 15.749042] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.749062] Bluetooth: BNEP filters: protocol multicast
[ 15.749075] Bluetooth: BNEP socket layer initialized
[ 15.753502] Bluetooth: MGMT ver 1.22
[ 15.762102] NET: Registered PF_ALG protocol family
+ sudo libcamera-still --list-cameras
Available cameras
-----------------
0 : imx519 [4656x3496 10-bit RGGB] (/base/soc/i2c0mux/i2c@1/imx519@1a)
Modes: 'SRGGB10_CSI2P' : 1280x720 [80.01 fps - (1048, 1042)/2560x1440 crop]
1920x1080 [60.05 fps - (408, 674)/3840x2160 crop]
2328x1748 [30.00 fps - (0, 0)/4656x3496 crop]
3840x2160 [18.00 fps - (408, 672)/3840x2160 crop]
4656x3496 [9.00 fps - (0, 0)/4656x3496 crop]
++ date +%Y-%m-%dT%H:%M:%S%Z
+ sudo libcamera-still -t 500 -n -o /home/pi/Pictures/test-2024-03-17T04:01:48CDT.jpg
[0:11:33.695289192] [995] INFO Camera camera_manager.cpp:297 libcamera v0.0.0+4367-ad9428b4
[0:11:33.753544532] [997] INFO RPI vc4.cpp:444 Registered camera /base/soc/i2c0mux/i2c@1/imx519@1a to Unicam device /dev/media4 and ISP device /dev/media1
[0:11:33.753620105] [997] INFO RPI pipeline_base.cpp:1101 Using configuration file '/usr/share/libcamera/pipeline/rpi/vc4/rpi_apps.yaml'
[0:11:33.754502218] [995] INFO Camera camera.cpp:1033 configuring streams: (0) 2328x1748-YUV420
[0:11:33.754991246] [997] INFO RPI vc4.cpp:572 Sensor: /base/soc/i2c0mux/i2c@1/imx519@1a - Selected sensor format: 2328x1748-SRGGB10_1X10 - Selected unicam format: 2328x1748-pRAA
[0:11:34.477546334] [995] INFO Camera camera.cpp:1033 configuring streams: (0) 4656x3496-YUV420 (1) 4656x3496-SRGGB10_CSI2P
[0:11:34.480365949] [997] INFO RPI vc4.cpp:572 Sensor: /base/soc/i2c0mux/i2c@1/imx519@1a - Selected sensor format: 4656x3496-SRGGB10_1X10 - Selected unicam format: 4656x3496-pRAA
Still capture image received
➜ ~
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment