Skip to content

Instantly share code, notes, and snippets.

@RobertCNelson

RobertCNelson/gist:0c0d85dc3281f87bf9834256da5fc9cf

Created March 16, 2022 20:56
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save RobertCNelson/0c0d85dc3281f87bf9834256da5fc9cf to your computer and use it in GitHub Desktop.
Save RobertCNelson/0c0d85dc3281f87bf9834256da5fc9cf to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.txt
U-Boot SPL 2021.04-g702ea30b (Nov 19 2021 - 00:11:11 +0000)
DRA752-GP ES2.0
Trying to boot from MMC1
no pinctrl state for default mode
U-Boot 2021.04-g702ea30b (Nov 19 2021 - 00:11:11 +0000)
CPU : DRA752-GP ES2.0
Model: TI AM5728 BeagleBoard-X15 rev C
Board: BeagleBoard X15 REV C.00
DRAM: 2 GiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Net: eth2: ethernet@48484000
Press SPACE to abort autoboot in 1 seconds
usb_boot is currently disabled
scsi_boot is currently disabled
switch to partitions #0, OK
mmc0 is current device
Partition Map for MMC device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 8192 31108063 0369ebdf-01 83 Boot
Scanning mmc device 0
Checking for: /uEnv.txt ...
Checking for: /boot/uEnv.txt ...
1362 bytes read in 2 ms (665 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt ...
debug: [uname_r=5.10.100-ti-r39] ...
loading /boot/vmlinuz-5.10.100-ti-r39 ...
10355200 bytes read in 448 ms (22 MiB/s)
loading /boot/dtbs/5.10.100-ti-r39/am57xx-beagle-x15-revc.dtb ...
205015 bytes read in 13 ms (15 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
loading /boot/initrd.img-5.10.100-ti-r39 ...
7483748 bytes read in 324 ms (22 MiB/s)
debug: [console=ttyS2,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100] ...
debug: [bootz 0x82000000 0x88080000:723164 0x88000000] ...
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8f8dc000, end 8ffff164 ... OK
Loading Device Tree to 8f8a6000, end 8f8db0d6 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.100-ti-r39 (voodoo@rpi4b4g-02) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP PREEMPT Mon Mar 14 17:54:04 UTC 2022
[ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: TI AM5728 BeagleBoard-X15 rev C
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x95800000, size 56 MiB
[ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x9d000000, size 32 MiB
[ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x9f000000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool
[ 0.000000] cma: Reserved 48 MiB at 0xfc800000
[ 0.000000] OMAP4: Map 0xafe00000 to (ptrval) for dram barrier
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff]
[ 0.000000] HighMem [mem 0x00000000a0000000-0x00000000ffffefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff]
[ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000afdfffff]
[ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000b7ffffff]
[ 0.000000] node 0: [mem 0x00000000b8000000-0x00000000ffffefff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffefff]
[ 0.000000] DRA752 ES2.0
[ 0.000000] percpu: Embedded 21 pages/cpu s54604 r8192 d23220 u86016
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522623
[ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Memory: 1441448K/2095100K available (14336K kernel code, 1407K rwdata, 3888K rodata, 1024K init, 309K bss, 440660K reserved, 212992K cma-reserved, 1130492K highmem)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x1c/0x42c with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[ 0.001220] TI gptimer clockevent: always-on 32786 Hz at /ocp/interconnect@4ae00000/segment@10000/target-module@8000
[ 0.002563] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48800000/segment@0/target-module@2c000
[ 0.002685] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48800000/segment@0/target-module@2e000
[ 0.003479] Console: colour dummy device 80x30
[ 0.003540] Calibrating delay loop... 2002.94 BogoMIPS (lpj=4005888)
[ 0.037872] pid_max: default: 32768 minimum: 301
[ 0.038024] LSM: Security Framework initializing
[ 0.038085] Yama: becoming mindful.
[ 0.038208] AppArmor: AppArmor initialized
[ 0.038238] TOMOYO Linux initialized
[ 0.038299] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.038299] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.039062] CPU: Testing write buffer coherency: ok
[ 0.039123] CPU0: Spectre v2: using ICIALLU workaround
[ 0.062255] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.070098] rcu: Hierarchical SRCU implementation.
[ 0.078765] EFI services will not be available.
[ 0.091369] smp: Bringing up secondary CPUs ...
[ 0.139709] CPU1: Spectre v2: using ICIALLU workaround
[ 0.139862] smp: Brought up 1 node, 2 CPUs
[ 0.139892] SMP: Total of 2 processors activated (4005.88 BogoMIPS).
[ 0.139892] CPU: All CPU(s) started in HYP mode.
[ 0.139892] CPU: Virtualization extensions available.
[ 0.140350] devtmpfs: initialized
[ 0.165924] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.166198] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.166229] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.169433] pinctrl core: initialized pinctrl subsystem
[ 0.170013] DMI not present or invalid.
[ 0.170318] NET: Registered protocol family 16
[ 0.172760] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.175598] omap_hwmod: l3_main_2 using broken dt data from ocp
[ 0.195373] audit: initializing netlink subsys (disabled)
[ 0.196014] thermal_sys: Registered thermal governor 'fair_share'
[ 0.196014] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.196044] thermal_sys: Registered thermal governor 'step_wise'
[ 0.196044] thermal_sys: Registered thermal governor 'user_space'
[ 0.196044] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.196105] audit: type=2000 audit(0.188:1): state=initialized audit_enabled=0 res=1
[ 0.197174] cpuidle: using governor ladder
[ 0.197204] cpuidle: using governor menu
[ 1.033996] random: fast init done
[ 2.910125] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 2.910125] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 2.941711] Kprobes globally optimized
[ 2.948760] raid6: skip pq benchmark and using algorithm neonx8
[ 2.948760] raid6: using neon recovery algorithm
[ 2.951568] evm_5v0: supplied by main_12v0
[ 2.953857] iommu: Default domain type: Translated
[ 2.957366] SCSI subsystem initialized
[ 2.957672] usbcore: registered new interface driver usbfs
[ 2.957733] usbcore: registered new interface driver hub
[ 2.957763] usbcore: registered new device driver usb
[ 2.958709] mc: Linux media interface: v0.10
[ 2.958740] videodev: Linux video capture interface: v2.00
[ 2.958801] pps_core: LinuxPPS API ver. 1 registered
[ 2.958801] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.958831] PTP clock support registered
[ 2.960540] NetLabel: Initializing
[ 2.960540] NetLabel: domain hash size = 128
[ 2.960540] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 2.960601] NetLabel: unlabeled traffic allowed by default
[ 2.961151] clocksource: Switched to clocksource 32k_counter
[ 3.773864] VFS: Disk quotas dquot_6.6.0
[ 3.773956] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.774627] AppArmor: AppArmor Filesystem Enabled
[ 3.784210] NET: Registered protocol family 2
[ 3.784362] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 3.785430] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 3.785491] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 3.785552] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 3.785614] TCP: Hash tables configured (established 4096 bind 4096)
[ 3.785736] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 3.785797] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 3.785949] NET: Registered protocol family 1
[ 3.786560] RPC: Registered named UNIX socket transport module.
[ 3.786560] RPC: Registered udp transport module.
[ 3.786560] RPC: Registered tcp transport module.
[ 3.786590] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.786590] NET: Registered protocol family 44
[ 3.787139] Trying to unpack rootfs image as initramfs...
[ 4.069580] Freeing initrd memory: 7312K
[ 4.070526] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ 4.070739] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 4.073577] Initialise system trusted keyrings
[ 4.073760] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 4.078521] zbud: loaded
[ 4.080169] NFS: Registering the id_resolver key type
[ 4.080200] Key type id_resolver registered
[ 4.080200] Key type id_legacy registered
[ 4.080322] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 4.080322] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 4.080352] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 4.080993] fuse: init (API version 7.32)
[ 4.083007] jitterentropy: Initialization failed with host not compliant with requirements: 2
[ 4.083038] xor: automatically using best checksumming function neon
[ 4.083038] Key type asymmetric registered
[ 4.083038] Asymmetric key parser 'x509' registered
[ 4.083251] bounce: pool size: 64 pages
[ 4.083312] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 4.083496] io scheduler mq-deadline registered
[ 4.696105] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
[ 5.106842] OMAP GPIO hardware version 0.1
[ 5.334045] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz
[ 5.363616] palmas 0-0058: Irq flag is 0x00000008
[ 5.387115] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0
[ 5.402557] smps12: supplied by regulator-dummy
[ 5.404663] smps3: supplied by regulator-dummy
[ 5.406738] smps45: supplied by regulator-dummy
[ 5.408996] smps6: supplied by regulator-dummy
[ 5.411254] SMPS7: supplied by regulator-dummy
[ 5.412322] smps8: supplied by regulator-dummy
[ 5.414398] SMPS9: supplied by regulator-dummy
[ 5.414672] ldo1: supplied by regulator-dummy
[ 5.416900] ldo2: supplied by regulator-dummy
[ 5.419006] ldo3: supplied by regulator-dummy
[ 5.421081] ldo4: supplied by regulator-dummy
[ 5.423645] LDO5: supplied by regulator-dummy
[ 5.424407] LDO6: supplied by regulator-dummy
[ 5.425201] LDO7: supplied by regulator-dummy
[ 5.425964] LDO8: supplied by regulator-dummy
[ 5.426422] ldo9: supplied by regulator-dummy
[ 5.428649] ldoln: supplied by regulator-dummy
[ 5.430725] ldousb: supplied by regulator-dummy
[ 5.449920] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[ 5.473052] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[ 5.474426] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[ 5.483245] edma 43300000.dma: memcpy is disabled
[ 5.486846] edma 43300000.dma: TI EDMA DMA engine driver
[ 5.503845] pinctrl-single 4a003400.pinmux: 282 pins, size 1128
[ 5.514953] vdd_3v3: supplied by regen1
[ 5.515258] aic_dvdd_fixed: supplied by vdd_3v3
[ 5.518157] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 5.521209] printk: console [ttyS2] disabled
[ 5.521270] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 110, base_baud = 3000000) is a 8250
[ 6.596191] printk: console [ttyS2] enabled
[ 6.603668] omap_rng 48090000.rng: Random Number Generator ver. 20
[ 6.604095] random: crng init done
[ 6.611022] sdhci: Secure Digital Host Controller Interface driver
[ 6.619598] sdhci: Copyright(c) Pierre Ossman
[ 6.624023] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.630767] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22)
[ 6.631835] DSS: OMAP DSS rev 6.1
[ 6.639648] sdhci-omap 4809c000.mmc: Got CD GPIO
[ 6.650207] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode
[ 6.670898] etnaviv-gpu: probe of 59000000.bb2d failed with error -2
[ 6.679290] at24 0-0050: supply vcc not found, using dummy regulator
[ 6.681182] mmc1: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA
[ 6.686401] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA
[ 6.700164] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
[ 6.709106] ahci 4a140000.sata: supply ahci not found, using dummy regulator
[ 6.716491] ahci 4a140000.sata: supply phy not found, using dummy regulator
[ 6.723815] ahci 4a140000.sata: supply target not found, using dummy regulator
[ 6.731811] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1
[ 6.737670] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 6.746459] ahci 4a140000.sata: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst
[ 6.756652] scsi host0: ahci
[ 6.759918] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 34
[ 6.805358] mmc0: new high speed SDHC card at address aaaa
[ 6.811553] mmcblk0: mmc0:aaaa SE16G 14.8 GiB
[ 6.816101] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000
[ 6.824920] mmc1: new DDR MMC card at address 0001
[ 6.825317] mmcblk0: p1
[ 6.833038] mmcblk1: mmc1:0001 M62704 3.53 GiB
[ 6.838043] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
[ 6.844451] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
[ 6.850616] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (243:0)
[ 6.863769] mmcblk1: p1
[ 6.872009] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY
[ 6.881835] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY
[ 6.892456] cpsw-switch 48484000.switch: initialized cpsw ale version 1.4
[ 6.899322] cpsw-switch 48484000.switch: ALE Table size 1024
[ 6.905120] cpsw-switch 48484000.switch: cpts: overflow check period 1250 (jiffies)
[ 6.912872] cpsw-switch 48484000.switch: CPTS: ref_clk_freq:266000000 calc_mult:4036623398 calc_shift:30 error:-1 nsec/sec
[ 6.924041] cpsw-switch 48484000.switch: Detected MACID = d4:36:39:27:09:26
[ 6.931091] cpsw-switch 48484000.switch: Detected MACID = d4:36:39:27:09:27
[ 6.939758] cpsw-switch 48484000.switch: initialized (regs 0x48484000, pool size 256) hw_ver:0019010F 1.15 (0)
[ 6.950500] usbcore: registered new interface driver smsc95xx
[ 6.962646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.969238] ehci-platform: EHCI generic platform driver
[ 6.975097] ehci-omap: OMAP-EHCI Host Controller driver
[ 6.982177] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.987731] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 6.995819] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 7.005340] xhci-hcd xhci-hcd.0.auto: irq 179, io mem 0x48890000
[ 7.011810] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 7.020141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.027435] usb usb1: Product: xHCI Host Controller
[ 7.032379] usb usb1: Manufacturer: Linux 5.10.100-ti-r39 xhci-hcd
[ 7.038604] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 7.044067] hub 1-0:1.0: USB hub found
[ 7.047912] hub 1-0:1.0: 1 port detected
[ 7.052276] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 7.057861] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 7.065612] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 7.072265] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.080444] ata1: SATA link down (SStatus 0 SControl 300)
[ 7.086120] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 7.094451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.101745] usb usb2: Product: xHCI Host Controller
[ 7.106658] usb usb2: Manufacturer: Linux 5.10.100-ti-r39 xhci-hcd
[ 7.112884] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 7.118255] hub 2-0:1.0: USB hub found
[ 7.122100] hub 2-0:1.0: 1 port detected
[ 7.128356] palmas_pwrbutton 48070000.i2c:tps659038@58:tps659038_pwr_button: h/w controlled shutdown duration=12 seconds
[ 7.140472] input: palmas_pwron as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48070000.target-module/48070000.i2c/i2c-0/0-0058/48070000.i2c:tps659038@58:tps659038_pwr_button/input/input0
[ 7.187316] rtc-ds1307 2-006f: registered as rtc0
[ 7.192413] rtc-ds1307 2-006f: setting system clock to 2022-03-16T20:56:12 UTC (1647464172)
[ 7.203155] omap_rtc 48838000.rtc: registered as rtc2
[ 7.211547] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: registered as rtc1
[ 7.220947] i2c /dev entries driver
[ 7.228942] gpio-fan gpio_fan: GPIO fan initialized
[ 7.238250] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 7.245544] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 7.254089] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
[ 7.264770] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.271545] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3
[ 7.277740] omap-aes 4b500000.aes: will run requests pump with realtime priority
[ 7.286132] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3
[ 7.292327] omap-aes 4b700000.aes: will run requests pump with realtime priority
[ 7.300476] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
[ 7.306640] omap-des 480a5000.des: will run requests pump with realtime priority
[ 7.315734] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3
[ 7.321655] omap-sham 4b101000.sham: will run requests pump with realtime priority
[ 7.325195] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 7.337860] omap-sham 42701000.sham: hw accel on OMAP rev 4.3
[ 7.343780] omap-sham 42701000.sham: will run requests pump with realtime priority
[ 7.354949] hid: raw HID events driver (C) Jiri Kosina
[ 7.360473] usbcore: registered new interface driver usbhid
[ 7.366088] usbhid: USB HID core driver
[ 7.374420] drop_monitor: Initializing network drop monitor service
[ 7.381378] NET: Registered protocol family 10
[ 7.415710] Segment Routing with IPv6
[ 7.419555] mip6: Mobile IPv6
[ 7.422576] NET: Registered protocol family 17
[ 7.427276] Key type dns_resolver registered
[ 7.431671] mpls_gso: MPLS GSO support
[ 7.435607] ThumbEE CPU extension supported.
[ 7.439941] Registering SWP/SWPB emulation handler
[ 7.444793] omap_voltage_late_init: Voltage driver support not added
[ 7.451202] Power Management for TI OMAP4+ devices.
[ 7.456634] registered taskstats version 1
[ 7.460754] Loading compiled-in X.509 certificates
[ 7.465667] zswap: loaded using pool lzo/zbud
[ 7.470520] Key type ._fscrypt registered
[ 7.474578] Key type .fscrypt registered
[ 7.478546] Key type fscrypt-provisioning registered
[ 7.485778] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[ 7.489959] Btrfs loaded, crc32c=crc32c-generic
[ 7.494049] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 7.498687] AppArmor: AppArmor sha1 policy hashing enabled
[ 7.505767] usb 1-1: SerialNumber: 490B208927F9
[ 7.551239] dmm 4e000000.dmm: workaround for errata i878 in use
[ 7.552764] hub 1-1:1.0: USB hub found
[ 7.561065] hub 1-1:1.0: 4 ports detected
[ 7.565185] dmm 4e000000.dmm: initialized all PAT entries
[ 7.571533] vtt_fixed: supplied by smps3
[ 7.577484] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[ 7.585754] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[ 7.592346] platform 40800000.dsp: Adding to iommu group 0
[ 7.599304] omap-iommu 58882000.mmu: 58882000.mmu registered
[ 7.605438] platform 58820000.ipu: Adding to iommu group 1
[ 7.612487] omap-iommu 55082000.mmu: 55082000.mmu registered
[ 7.618255] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 7.625793] platform 55020000.ipu: Adding to iommu group 2
[ 7.632812] omap-iommu 41501000.mmu: 41501000.mmu registered
[ 7.640167] omap-iommu 41502000.mmu: 41502000.mmu registered
[ 7.646484] platform 41000000.dsp: Adding to iommu group 3
[ 7.653839] omapdss_dss 58000000.dss: bound 58001000.dispc (ops 0xc0f95bac)
[ 7.661193] usb 2-1: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
[ 7.669616] omapdss_dss 58000000.dss: bound 58040000.encoder (ops 0xc0f97df0)
[ 7.676818] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.685852] omapdrm omapdrm.0: [drm] Cannot find any crtc or sizes
[ 7.693115] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0
[ 7.709533] Freeing unused kernel memory: 1024K
[ 7.714385] hub 2-1:1.0: USB hub found
[ 7.718444] hub 2-1:1.0: 4 ports detected
[ 7.720031] Checked W+X mappings: passed, no W+X pages found
[ 7.728637] Run /init as init process
Loading, please wait...
Starting version 247.3-6
[ 8.701263] omapdrm omapdrm.0: [drm] Cannot find any crtc or sizes
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Warning: fsck not present, so skipping root file system
[ 9.664428] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 9.854705] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 10.385284] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 10.408264] systemd[1]: Detected architecture arm.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 10.434020] systemd[1]: Set hostname to <BeagleBone>.
[ 11.076629] systemd[1]: Queued start job for default target Graphical Interface.
[ 11.088836] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 11.110534] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 11.134613] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 11.158264] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 11.181579] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 11.205535] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 11.229949] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ 11.257476] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 11.281555] systemd[1]: Reached target Paths.
[ OK ] Reached target Paths.
[ 11.297363] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 11.317291] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 11.333404] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 11.349945] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 11.365692] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 11.389526] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 11.413879] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 11.437683] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 11.461853] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 11.477874] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 11.501831] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 11.521667] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 11.541839] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 11.553955] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 11.581268] systemd[1]: Mounting /sys/kernel/debug...
Mounting /sys/kernel/debug...
[ 11.601379] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 11.622070] systemd[1]: Starting Set the console keyboard layout...
Starting Set the console keyboard layout...
[ 11.652404] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Create list of st…odes for the current kernel...
[ 11.681915] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 11.701873] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 11.721832] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 11.747314] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 11.760833] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 11.795501] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 11.813629] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 11.832702] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 11.873046] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File Sy[ 11.883789] systemd[1]: Mounted /sys/kernel/debug.
stem.
[ 11.894500] systemd[1]: Mounted Kernel Trace File System.
[ OK ] Mounted /sys/kernel/debug.
[ 11.902282] systemd[1]: Finished Set the console keyboard layout.
[ OK ] Mounted Kernel Trace File System.
[ OK ] Finished Set the console keyboard l[ 11.920501] systemd[1]: Finished Create list of static device nodes for the current kernel.
ayout.
[ OK ] Finished Create list of st… nodes[ 11.942993] systemd[1]: modprobe@configfs.service: Succeeded.
for the current kernel.
[ 11.973419] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 11.993652] NET: Registered protocol family 36
[ 12.003143] systemd[1]: modprobe@drm.service: Succeeded.
[ 12.011810] usbcore: registered new interface driver wpanusb
[ 12.014831] systemd[1]: Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module drm.
[ 12.058929] systemd[1]: modprobe@fuse.service: Succeeded.
[ 12.062957] gb_bootrom: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.070800] systemd[1]: Finished Load Kernel Module fuse.
[ 12.082336] greybus: registered new driver bootrom
[ 12.089813] gb_spilib: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.104797] gb_firmware: module is from the staging directory, the quality is unknown, you have been warned.
[ OK ] Finished Load Kernel Module fuse 12.115814] greybus: registered new driver gb-firmware
m.
[ 12.138793] gb_gbphy: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.139434] systemd[1]: Finished File System Check on Root Device.
[ OK ] Finished File System Check on Root [ 12.170135] greybus: registered new driver gbphy
Device.
[ 12.192504] gb_gpio: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.194580] systemd[1]: Mounting FUSE Control File System...
[ 12.216369] gb_gbphy: registered new driver gpio
Mounting FUSE Control File System...
[ 12.232055] gb_hid: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.242095] greybus: registered new driver hid
[ 12.248962] gb_i2c: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.263397] gb_gbphy: registered new driver i2c
[ 12.270080] systemd[1]: Mounting Kernel Configuration File System...
[ 12.283142] gb_log: module is from the staging directory, the quality is unknown, you have been warned.
Mounting Kernel Configuration File System.[ 12.297332] greybus: registered new driver log
..
[ 12.310424] gb_loopback: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.321472] greybus: registered new driver loopback
[ 12.332794] gb_raw: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.337615] systemd[1]: Started File System Check Daemon to report status.
[ OK ] Started File System Check Daemon to[ 12.354339] greybus: registered new driver raw
report status.
[ 12.364532] gb_spi: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.379821] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.389831] gb_gbphy: registered new driver spi
Starting Remount Root and Kernel File Systems gb_uart: module is from the staging directory, the quality is unknown, you have been warned.
[0m...
[ 12.412353] gb_gbphy: registered new driver uart
[ 12.425018] systemd[1]: Started Journal Service.
[ 12.429870] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[ OK ] Started Journal Service.
[ OK ] Finished Load Kernel Modules.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Remount Root and Kernel File Systems.
Starting Flush Journal to Persistent Storage...
Starting Load/Save Random Seed...
[ 12.572052] systemd-journald[301]: Received client request to flush runtime journal.
Starting Apply Kernel Variables...
Starting Create System Users...
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Coldplug All udev Devices.
Starting Helper to synchronize boot up for ifupdown...
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Set console font and keymap...
Starting Raise network interfaces...
Starting Create Volatile Files and Directories...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Raise network interfaces.
[ OK ] Started Rule-based Manager for Device Events and Files.
Starting Network Service...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target System Time Set.[ 13.891143] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ 13.986724] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=POLL)
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
Starting BeagleBoard.org USB gadgets...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting LSB: Load kernel …d to enable cpufreq scaling...
Starting System Logging Service...
Starting User Login Management...
Starting WPA supplicant...
[ OK ] Started Network Service.
[ OK ] Started System Logging Service.
Starting Network Name Resolution...
[ 14.562286] using random self ethernet address
[ 14.580352] using random host ethernet address
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ OK ] Started User Login Management.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started WPA supplicant.
[ 14.701751] using random self ethernet address
[ 14.716003] using random host ethernet address
[ 14.761596] Mass Storage Function, version: 2009/09/11
[ 14.768951] LUN: removable file: (no medium)
[ 14.805725] usb0: HOST MAC 1c:ba:8c:a2:ed:6a
[ 14.814392] usb0: MAC 1c:ba:8c:a2:ed:6b
[ 14.826660] usb1: HOST MAC 1c:ba:8c:a2:ed:6c
[ 14.837219] usb1: MAC 1c:ba:8c:a2:ed:6d
[ OK ] Started BeagleBoard.org USB gadgets.
[ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
Starting LSB: set CPUFreq kernel parameters...
[ OK ] Started LSB: set CPUFreq kernel parameters.
[ 15.147094] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000
[ 15.163726] remoteproc remoteproc0: 58820000.ipu is available
[ 15.206787] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000
[ 15.216583] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2
[ 15.229248] remoteproc remoteproc0: powering up 58820000.ipu
[ 15.241394] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2
[ 15.257202] remoteproc remoteproc0: request_firmware failed: -2
[ 15.268493] remoteproc remoteproc1: 55020000.ipu is available
[ OK ] Started Network Name Resolution.
[ 15.288757] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2
[ 15.298614] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000
[ 15.306732] remoteproc remoteproc1: powering up 55020000.ipu
[ 15.312988] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2
[ OK ] Reached target Network.[ 15.325225] remoteproc remoteproc1: request_firmware failed: -2
[ OK ] Reached target Host and Network Name Lookups.
[ 15.359863] remoteproc remoteproc2: 40800000.dsp is available
Starting Beagle Flasher Shutdown...
[ 15.385101] remoteproc remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2
[ 15.395172] omap-rproc 41000000.dsp: assigned reserved memory node dsp2-memory@9f000000
Starting A high performanc… and a reverse pr[ 15.413574] remoteproc remoteproc2: powering up 40800000.dsp
oxy server...
[ 15.425384] remoteproc remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2
[ 15.438110] remoteproc remoteproc2: request_firmware failed: -2
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Finished Beagle Flasher Shutdown.
[ 15.547363] remoteproc remoteproc3: 41000000.dsp is available
[ OK ] Found device /dev/ttyS2.
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ 15.598022] remoteproc remoteproc3: Direct firmware load for dra7-dsp2-fw.xe66 failed with error -2
[ 15.615600] remoteproc remoteproc3: powering up 41000000.dsp
[ OK ] Started Serial Getty on ttyS2.
[ 15.627838] remoteproc remoteproc3: Direct firmware load for dra7-dsp2-fw.xe66 failed with error -2
[ 15.640624] remoteproc remoteproc3: request_firmware failed: -2
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started A high performance…er and a reverse proxy server.
[ 16.207702] tmp102 0-0048: initialized
[ 16.776977] davinci-mcasp 48468000.mcasp: IRQ common not found
[ OK ] Reached target Hardware activated USB gadget.
[ 17.065246] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin
[ 17.071075] vpe 489d0000.vpe: Direct firmware load for vpdma-1b8.bin failed with error -2
[ 17.079345] vpe 489d0000.vpe: couldn't get firmware
[ 17.843811] pvrsrvkm: loading out-of-tree module taints kernel.
[ 17.897430] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.gpu on minor 1
[ 18.110778] cpsw-switch 48484000.switch eth0: Link is Up - 1Gbps/Full - flow control off
[ 18.123199] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[ OK ] Found device /dev/ttyGS0.
[ OK ] Started Serial Getty on ttyGS0.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
[ OK ] Started Node-RED graphical event wiring tool.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Finished Update UTMP about System Runlevel Changes.
[ 18.555755] remoteproc remoteproc4: 4b234000.pru is available
[ 18.567047] remoteproc remoteproc5: 4b238000.pru is available
[ 18.585113] remoteproc remoteproc6: 4b2b4000.pru is available
[ 18.671752] remoteproc remoteproc7: 4b2b8000.pru is available
Debian GNU/Linux 11 BeagleBone ttyS2
BeagleBoard.org Debian Bullseye IoT Image 2022-03-16
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
BeagleBone login: root
Password:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Mar 16 20:55:41 UTC 2022 on ttyS2
root@BeagleBone:~# uname -r
5.10.100-ti-r39
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment