Created
December 5, 2012 01:54
-
-
Save RobertCNelson/4211363 to your computer and use it in GitHub Desktop.
Panda ES: 3.7.0-rc8-x1: hsmmc regression (non device tree)
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot SPL 2012.10-00010-gd8d09ae (Nov 08 2012 - 20:04:47) | |
OMAP4460 ES1.1 | |
OMAP SD/MMC: 0 | |
reading u-boot.img | |
reading u-boot.img | |
U-Boot 2012.10-00010-gd8d09ae (Nov 08 2012 - 20:04:47) | |
CPU : OMAP4460 ES1.1 | |
Board: OMAP4 Panda | |
I2C: ready | |
DRAM: 1 GiB | |
MMC: OMAP SD/MMC: 0 | |
Using default environment | |
In: serial | |
Out: serial | |
Err: serial | |
Net: No ethernet found. | |
Hit any key to stop autoboot: 3 \0x08\0x08\0x08 2 \0x08\0x08\0x08 1 \0x08\0x08\0x08 0 | |
SD/MMC found on device 0 | |
reading uEnv.txt | |
1035 bytes read | |
Loaded environment from uEnv.txt | |
Importing environment from mmc ... | |
reading zImage | |
3356816 bytes read | |
reading initrd.img | |
3186641 bytes read | |
Booting from mmc ... | |
Starting kernel ... | |
Uncompressing Linux... done, booting the kernel. | |
[ 0.000000] Booting Linux on physical CPU 0 | |
[ 0.000000] Initializing cgroup subsys cpuset | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Linux version 3.7.0-rc8-x1 (root@panda-1gb-a2) (gcc version 4.6.3 (Debian 4.6.3-11) ) #1 SMP Tue Dec 4 03:07:55 UTC 2012 | |
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] Machine: OMAP4 Panda board | |
[ 0.000000] Beagle expansionboard: | |
[ 0.000000] Beagle second expansionboard: | |
[ 0.000000] Reserving 16777216 bytes SDRAM for VRAM | |
[ 0.000000] cma: CMA: reserved 16 MiB at ad800000 | |
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc | |
[ 0.000000] OMAP4: Map 0xbf800000 to 0xfe600000 for dram barrier | |
[ 0.000000] OMAP4460 ES1.1 | |
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c12ab000 s13312 r8192 d15360 u36864 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 253952 | |
[ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 vram=16M omapfb.mode=dvi:1280x720MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc buddy= buddy2= | |
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ 0.000000] allocated 2097152 bytes of page_cgroup | |
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
[ 0.000000] Memory: 744MB 256MB = 1000MB total | |
[ 0.000000] Memory: 982440k/982440k available, 66136k reserved, 262144K highmem | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
[ 0.000000] .text : 0xc0008000 - 0xc08f43bc (9137 kB) | |
[ 0.000000] .init : 0xc08f5000 - 0xc0952400 ( 373 kB) | |
[ 0.000000] .data : 0xc0954000 - 0xc09db190 ( 541 kB) | |
[ 0.000000] .bss : 0xc09db1b4 - 0xc0aa2c94 ( 799 kB) | |
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] Hierarchical RCU implementation. | |
[ 0.000000] NR_IRQS:16 nr_irqs:16 16 | |
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz | |
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms | |
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz | |
[ 0.000000] Console: colour dummy device 80x30 | |
[ 0.000000] console [tty0] enabled | |
[ 0.000610] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488) | |
[ 0.070343] pid_max: default: 32768 minimum: 301 | |
[ 0.070526] Security Framework initialized | |
[ 0.070556] AppArmor: AppArmor initialized | |
[ 0.070831] Mount-cache hash table entries: 512 | |
[ 0.071838] Initializing cgroup subsys cpuacct | |
[ 0.071899] Initializing cgroup subsys memory | |
[ 0.071929] Initializing cgroup subsys devices | |
[ 0.071960] Initializing cgroup subsys freezer | |
[ 0.071960] Initializing cgroup subsys blkio | |
[ 0.071990] Initializing cgroup subsys perf_event | |
[ 0.072113] CPU: Testing write buffer coherency: ok | |
[ 0.072387] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
[ 0.072662] Setting up static identity map for 0x80654fc8 - 0x80655020 | |
[ 0.072692] L310 cache controller enabled | |
[ 0.072723] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B | |
[ 0.073974] CPU1: Booted secondary processor | |
[ 0.142944] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
[ 0.143005] Brought up 2 CPUs | |
[ 0.143035] SMP: Total of 2 processors activated (2792.83 BogoMIPS). | |
[ 0.143829] devtmpfs: initialized | |
[ 0.204772] pinctrl core: initialized pinctrl subsystem | |
[ 0.205108] regulator-dummy: no parameters | |
[ 0.206329] NET: Registered protocol family 16 | |
[ 0.210357] DMA: preallocated 256 KiB pool for atomic coherent allocations | |
[ 0.210601] omap-gpmc omap-gpmc: GPMC revision 6.0 | |
[ 0.212371] OMAP GPIO hardware version 0.1 | |
[ 0.215942] omap_mux_init: Add partition: #1: core, flags: 2 | |
[ 0.217010] omap_mux_init: Add partition: #2: wkup, flags: 2 | |
[ 0.217224] _omap_mux_get_by_name: Could not find signal fref_clk0_out.sys_drm_msecure | |
[ 0.217346] _omap_mux_get_by_name: Could not find signal sys_nirq | |
[ 0.217346] _omap_mux_get_by_name: Could not find signal sys_nirq | |
[ 0.218231] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx | |
[ 0.218261] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx | |
[ 0.252380] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
[ 0.252380] hw-breakpoint: maximum watchpoint size is 4 bytes. | |
[ 0.253387] omap_init_sham: platform not supported | |
[ 0.253387] omap_init_aes: platform not supported | |
[ 0.255920] OMAP DMA hardware revision 0.0 | |
[ 0.257659] arm-pmu: alias fck already exists | |
[ 0.264221] bio: create slab <bio-0> at 0 | |
[ 0.275207] omap-dma-engine omap-dma-engine: OMAP DMA engine driver | |
[ 0.275390] vwl1271: 1800 mV | |
[ 0.276062] SCSI subsystem initialized | |
[ 0.276245] usbcore: registered new interface driver usbfs | |
[ 0.276336] usbcore: registered new interface driver hub | |
[ 0.276458] usbcore: registered new device driver usb | |
[ 0.292022] Skipping twl internal clock init and using bootloader value (unknown osc rate) | |
[ 0.292938] twl 1-0048: PIH (irq 39) chaining IRQs 418..438 | |
[ 0.293334] VUSB: 3300 mV normal standby | |
[ 0.293487] twl6030_usb twl6030_usb: phy not ready, deferring probe | |
[ 0.293518] platform twl6030_usb: Driver twl6030_usb requests probe deferral | |
[ 0.293762] vdd_mpu: 500 <--> 1500 mV normal | |
[ 0.294006] vdd_iva: 500 <--> 1500 mV normal | |
[ 0.294250] vdd_core: 500 <--> 1500 mV normal | |
[ 0.294738] V1V8: 1800 mV normal standby | |
[ 0.294982] V2V1: 2100 mV normal standby | |
[ 0.295379] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby | |
[ 0.295959] VPP: 1800 <--> 2500 mV at 1900 mV normal standby | |
[ 0.296630] VCXIO: 1800 mV normal standby | |
[ 0.296661] VCXIO: supplied by V2V1 | |
[ 0.297515] VDAC: 1800 mV normal standby | |
[ 0.297576] VDAC: supplied by V2V1 | |
[ 0.298278] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby | |
[ 0.298828] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby | |
[ 0.299316] VANA: 2100 mV normal standby | |
[ 0.299468] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz | |
[ 0.299530] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz | |
[ 0.315063] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz | |
[ 0.315124] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz | |
[ 0.330718] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz | |
[ 0.330780] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz | |
[ 0.346313] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz | |
[ 0.346343] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz | |
[ 0.346466] media: Linux media interface: v0.10 | |
[ 0.346527] Linux video capture interface: v2.00 | |
[ 0.346893] omap-iommu omap-iommu.0: ducati registered | |
[ 0.346984] omap-iommu omap-iommu.1: tesla registered | |
[ 0.347167] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.347625] NetLabel: Initializing | |
[ 0.347625] NetLabel: domain hash size = 128 | |
[ 0.347656] NetLabel: protocols = UNLABELED CIPSOv4 | |
[ 0.347717] NetLabel: unlabeled traffic allowed by default | |
[ 0.347991] Switching to clocksource 32k_counter | |
[ 0.362152] AppArmor: AppArmor Filesystem Enabled | |
[ 0.371429] NET: Registered protocol family 2 | |
[ 0.372161] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) | |
[ 0.374298] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) | |
[ 0.375518] TCP: Hash tables configured (established 131072 bind 65536) | |
[ 0.375610] TCP: reno registered | |
[ 0.375640] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.375701] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.376068] NET: Registered protocol family 1 | |
[ 0.376403] RPC: Registered named UNIX socket transport module. | |
[ 0.376434] RPC: Registered udp transport module. | |
[ 0.376464] RPC: Registered tcp transport module. | |
[ 0.376464] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.376586] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2 | |
[ 0.377227] Trying to unpack rootfs image as initramfs... | |
[ 0.632629] Freeing initrd memory: 3108K | |
[ 0.633087] CPU PMU: probing PMU on CPU 1 | |
[ 0.633148] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available | |
[ 0.633605] omap_dsp_init: 600000 bytes @ bfa00000 | |
[ 0.635009] audit: initializing netlink socket (disabled) | |
[ 0.635070] type=2000 audit(0.625:1): initialized | |
[ 0.808258] bounce pool size: 64 pages | |
[ 0.814300] VFS: Disk quotas dquot_6.5.2 | |
[ 0.814666] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
[ 0.817474] NFS: Registering the id_resolver key type | |
[ 0.817535] Key type id_resolver registered | |
[ 0.817565] Key type id_legacy registered | |
[ 0.817596] fuse init (API version 7.20) | |
[ 0.819152] Btrfs loaded | |
[ 0.819183] msgmni has been set to 1444 | |
[ 0.820556] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) | |
[ 0.820587] io scheduler noop registered | |
[ 0.820587] io scheduler deadline registered | |
[ 0.820648] io scheduler cfq registered (default) | |
[ 0.821807] OMAP DSS rev 4.0 | |
[ 0.823913] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ 0.824981] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 | |
[ 0.825378] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 | |
[ 0.825744] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 | |
[ 1.755828] console [ttyO2] enabled | |
[ 1.759887] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 | |
[ 1.775024] brd: module loaded | |
[ 1.782257] loop: module loaded | |
[ 1.788848] OneNAND driver initializing | |
[ 1.794433] usbcore: registered new interface driver cdc_ether | |
[ 1.800628] usbcore: registered new interface driver rndis_host | |
[ 1.806945] usbcore: registered new interface driver cdc_ncm | |
[ 1.813385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 1.820373] ehci-omap.0 supply hsusb0 not found, using dummy regulator | |
[ 1.827362] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller | |
[ 1.833496] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 | |
[ 1.871551] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 | |
[ 1.887145] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 | |
[ 1.893280] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 1.900421] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 1.908050] usb usb1: Product: OMAP-EHCI Host Controller | |
[ 1.913635] usb usb1: Manufacturer: Linux 3.7.0-rc8-x1 ehci_hcd | |
[ 1.919891] usb usb1: SerialNumber: ehci-omap.0 | |
[ 1.925140] hub 1-0:1.0: USB hub found | |
[ 1.929138] hub 1-0:1.0: 3 ports detected | |
[ 1.933654] Initializing USB Mass Storage driver... | |
[ 1.938873] usbcore: registered new interface driver usb-storage | |
[ 1.945220] USB Mass Storage support registered. | |
[ 1.950073] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) | |
[ 1.956298] unable to find transceiver of type USB2 PHY | |
[ 1.962005] HS USB OTG: no transceiver configured | |
[ 1.966949] musb-hdrc musb-hdrc.0: musb_init_controller failed with status -19 | |
[ 1.974914] mousedev: PS/2 mouse device common for all mice | |
[ 1.982208] twl_rtc twl_rtc: Enabling TWL-RTC | |
[ 1.989257] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 | |
[ 1.995849] i2c /dev entries driver | |
[ 2.000213] lirc_dev: IR Remote Control driver registered, major 246 | |
[ 2.007110] smssdio: Siano SMS1xxx SDIO driver | |
[ 2.011779] smssdio: Copyright Pierre Ossman | |
[ 2.016296] Driver for 1-wire Dallas network protocol. | |
[ 2.022583] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec | |
[ 2.030517] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com | |
[ 2.039520] cpu cpu0: opp_init_cpufreq_table: Device OPP not found (-19) | |
[ 2.046569] cpu cpu0: omap_cpu_init: cpu0: failed creating freq table[-19] | |
[ 2.053833] cpu cpu0: opp_init_cpufreq_table: Device OPP not found (-19) | |
[ 2.060913] cpu cpu0: omap_cpu_init: cpu1: failed creating freq table[-19] | |
[ 2.068145] cpuidle: using governor ladder | |
[ 2.072448] cpuidle: using governor menu | |
[ 2.076629] sdhci: Secure Digital Host Controller Interface driver | |
[ 2.083129] sdhci: Copyright(c) Pierre Ossman | |
[ 2.087890] ------------[ cut here ]------------ | |
[ 2.092773] WARNING: at drivers/gpio/gpiolib.c:1252 omap_hsmmc_probe+0x384/0xbe4() | |
[ 2.100738] Modules linked in: | |
[ 2.103973] [<c0013b8c>] (unwind_backtrace+0x0/0xe0) from [<c003a74c>] (warn_slowpath_common+0x4c/0x64) | |
[ 2.113891] [<c003a74c>] (warn_slowpath_common+0x4c/0x64) from [<c003a77c>] (warn_slowpath_null+0x18/0x1c) | |
[ 2.124053] [<c003a77c>] (warn_slowpath_null+0x18/0x1c) from [<c063e544>] (omap_hsmmc_probe+0x384/0xbe4) | |
[ 2.134063] [<c063e544>] (omap_hsmmc_probe+0x384/0xbe4) from [<c03e3248>] (platform_drv_probe+0x14/0x18) | |
[ 2.144073] [<c03e3248>] (platform_drv_probe+0x14/0x18) from [<c03e20ec>] (driver_probe_device+0xb0/0x1dc) | |
[ 2.154266] [<c03e20ec>] (driver_probe_device+0xb0/0x1dc) from [<c03e2278>] (__driver_attach+0x60/0x84) | |
[ 2.164154] [<c03e2278>] (__driver_attach+0x60/0x84) from [<c03e0acc>] (bus_for_each_dev+0x4c/0x78) | |
[ 2.173675] [<c03e0acc>] (bus_for_each_dev+0x4c/0x78) from [<c03e1880>] (bus_add_driver+0xac/0x21c) | |
[ 2.183227] [<c03e1880>] (bus_add_driver+0xac/0x21c) from [<c03e2788>] (driver_register+0x9c/0x138) | |
[ 2.192779] [<c03e2788>] (driver_register+0x9c/0x138) from [<c00088b8>] (do_one_initcall+0x90/0x160) | |
[ 2.202392] [<c00088b8>] (do_one_initcall+0x90/0x160) from [<c062e4e8>] (kernel_init+0x168/0x328) | |
[ 2.211761] [<c062e4e8>] (kernel_init+0x168/0x328) from [<c000d638>] (ret_from_fork+0x14/0x3c) | |
[ 2.220855] ---[ end trace 459da4f07772cc52 ]--- | |
[ 2.225738] omap_hsmmc: probe of omap_hsmmc.0 failed with error -16 | |
[ 2.232391] ------------[ cut here ]------------ | |
[ 2.237243] WARNING: at drivers/gpio/gpiolib.c:1252 omap_hsmmc_probe+0x384/0xbe4() | |
[ 2.245208] Modules linked in: | |
[ 2.248474] [<c0013b8c>] (unwind_backtrace+0x0/0xe0) from [<c003a74c>] (warn_slowpath_common+0x4c/0x64) | |
[ 2.258361] [<c003a74c>] (warn_slowpath_common+0x4c/0x64) from [<c003a77c>] (warn_slowpath_null+0x18/0x1c) | |
[ 2.268524] [<c003a77c>] (warn_slowpath_null+0x18/0x1c) from [<c063e544>] (omap_hsmmc_probe+0x384/0xbe4) | |
[ 2.278533] [<c063e544>] (omap_hsmmc_probe+0x384/0xbe4) from [<c03e3248>] (platform_drv_probe+0x14/0x18) | |
[ 2.288513] [<c03e3248>] (platform_drv_probe+0x14/0x18) from [<c03e20ec>] (driver_probe_device+0xb0/0x1dc) | |
[ 2.298706] [<c03e20ec>] (driver_probe_device+0xb0/0x1dc) from [<c03e2278>] (__driver_attach+0x60/0x84) | |
[ 2.308593] [<c03e2278>] (__driver_attach+0x60/0x84) from [<c03e0acc>] (bus_for_each_dev+0x4c/0x78) | |
[ 2.318145] [<c03e0acc>] (bus_for_each_dev+0x4c/0x78) from [<c03e1880>] (bus_add_driver+0xac/0x21c) | |
[ 2.327667] [<c03e1880>] (bus_add_driver+0xac/0x21c) from [<c03e2788>] (driver_register+0x9c/0x138) | |
[ 2.337219] [<c03e2788>] (driver_register+0x9c/0x138) from [<c00088b8>] (do_one_initcall+0x90/0x160) | |
[ 2.346832] [<c00088b8>] (do_one_initcall+0x90/0x160) from [<c062e4e8>] (kernel_init+0x168/0x328) | |
[ 2.356201] [<c062e4e8>] (kernel_init+0x168/0x328) from [<c000d638>] (ret_from_fork+0x14/0x3c) | |
[ 2.365264] ---[ end trace 459da4f07772cc53 ]--- | |
[ 2.370117] omap_hsmmc: probe of omap_hsmmc.4 failed with error -16 | |
[ 2.377136] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 2.383819] usbcore: registered new interface driver usbhid | |
[ 2.389709] usbhid: USB HID core driver | |
[ 2.394165] ashmem: initialized | |
[ 2.422119] omap-abe-twl6040 omap-abe-twl6040: twl6040-legacy <-> omap-mcpdm mapping ok | |
[ 2.433166] omap-hdmi-audio omap-hdmi-audio: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok | |
[ 2.443237] oprofile: using arm/armv7-ca9 | |
[ 2.447875] TCP: cubic registered | |
[ 2.451934] NET: Registered protocol family 10 | |
[ 2.457397] NET: Registered protocol family 17 | |
[ 2.462249] Key type dns_resolver registered | |
[ 2.467071] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
[ 2.476745] omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0). | |
[ 2.485229] omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0). | |
[ 2.493682] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu | |
[ 2.500915] omap2_set_init_voltage: unable to set vdd_mpu | |
[ 2.504394] usb 1-1: new high-speed USB device number 2 using ehci-omap | |
[ 2.513580] omap2_set_init_voltage: unable to find boot up OPP for vdd_core | |
[ 2.520935] omap2_set_init_voltage: unable to set vdd_core | |
[ 2.526702] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva | |
[ 2.533966] omap2_set_init_voltage: unable to set vdd_iva | |
[ 2.540191] Power Management for TI OMAP4. | |
[ 2.544799] ThumbEE CPU extension supported. | |
[ 2.549316] Registering SWP/SWPB emulation handler | |
[ 2.554382] SmartReflex Class3 initialized | |
[ 2.563507] clock: disabling unused clocks to save power | |
[ 2.569763] registered taskstats version 1 | |
[ 2.574249] fbcvt: 1280x720@60: CVT Name - .921M9-R | |
[ 2.589324] Console: switching to colour frame buffer device 160x45 | |
[ 2.607635] VANA: incomplete constraints, leaving on | |
[ 2.616119] VDAC: incomplete constraints, leaving on | |
[ 2.622100] VMMC: incomplete constraints, leaving on | |
[ 2.627716] VUSB: incomplete constraints, leaving on | |
[ 2.633270] twl6030_usb twl6030_usb: phy not ready, deferring probe | |
[ 2.639984] twl_rtc twl_rtc: setting system clock to 2012-12-05 01:52:41 UTC (1354672361) | |
[ 2.640014] platform twl6030_usb: Driver twl6030_usb requests probe deferral | |
[ 2.656249] sr_init: No PMIC hook to init smartreflex | |
[ 2.661743] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized | |
[ 2.670135] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized | |
[ 2.670135] twl6030_usb twl6030_usb: phy not ready, deferring probe | |
[ 2.670166] platform twl6030_usb: Driver twl6030_usb requests probe deferral | |
[ 2.700286] twl6030_usb twl6030_usb: phy not ready, deferring probe | |
[ 2.700286] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized | |
[ 2.700408] cpufreq_cpu0: failed to find cpu0 node | |
[ 2.700622] ALSA device list: | |
[ 2.700622] #0: PandaBoardES | |
[ 2.700622] #1: OMAPHDMI | |
[ 2.744873] platform twl6030_usb: Driver twl6030_usb requests probe deferral | |
[ 2.755035] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 | |
[ 2.755401] Freeing init memory: 372K | |
[ 2.771667] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 2.782409] hub 1-1:1.0: USB hub found | |
[ 2.782531] hub 1-1:1.0: 5 ports detected | |
[ 2.783905] twl6030_usb twl6030_usb: phy not ready, deferring probe | |
[ 2.783935] platform twl6030_usb: Driver twl6030_usb requests probe deferral | |
[ 2.876495] udevd[78]: starting version 175 | |
[ 3.067047] usb 1-1.1: new high-speed USB device number 3 using ehci-omap | |
[ 3.192291] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 | |
[ 3.202697] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 3.226226] twl6030_usb twl6030_usb: phy not ready, deferring probe | |
[ 3.235961] platform twl6030_usb: Driver twl6030_usb requests probe deferral |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment