Created
September 1, 2021 23:00
-
-
Save RobertCNelson/5d183f639148572523a09e5a80c57e69 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2019.04-g1da4564 (Aug 31 2021 - 14:32:40 +0000) | |
| Trying to boot from MMC1 | |
| Loading Environment from EXT4... ** File not found /boot/uboot.env ** | |
| ** Unable to read "/boot/uboot.env" from mmc0:1 ** | |
| U-Boot 2019.04-g1da4564 (Aug 31 2021 - 14:32:40 +0000) | |
| CPU : AM335X-GP rev 2.1 | |
| I2C: ready | |
| DRAM: 512 MiB | |
| No match for driver 'omap_hsmmc' | |
| No match for driver 'omap_hsmmc' | |
| Some drivers were not found | |
| Reset Source: Power-on reset has occurred. | |
| RTC 32KCLK Source: External. | |
| MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 | |
| Loading Environment from EXT4... ** File not found /boot/uboot.env ** | |
| ** Unable to read "/boot/uboot.env" from mmc0:1 ** | |
| Board: BeagleBone Black | |
| <ethaddr> not set. Validating first E-fuse MAC | |
| BeagleBone Black: | |
| BeagleBone Cape EEPROM: no EEPROM at address: 0x54 | |
| BeagleBone Cape EEPROM: no EEPROM at address: 0x55 | |
| BeagleBone Cape EEPROM: no EEPROM at address: 0x56 | |
| BeagleBone Cape EEPROM: no EEPROM at address: 0x57 | |
| Net: eth0: MII MODE | |
| cpsw, usb_ether | |
| Press SPACE to abort autoboot in 0 seconds | |
| board_name=[A335BNLT] ... | |
| board_rev=[00C0] ... | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| SD/MMC found on device 0 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:1... | |
| gpio: pin 56 (gpio 56) value is 0 | |
| gpio: pin 55 (gpio 55) value is 0 | |
| gpio: pin 54 (gpio 54) value is 0 | |
| gpio: pin 53 (gpio 53) value is 1 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| gpio: pin 54 (gpio 54) value is 1 | |
| Checking for: /uEnv.txt ... | |
| Checking for: /boot.scr ... | |
| Checking for: /boot/boot.scr ... | |
| Checking for: /boot/uEnv.txt ... | |
| gpio: pin 55 (gpio 55) value is 1 | |
| 1787 bytes read in 34 ms (50.8 KiB/s) | |
| Loaded environment from /boot/uEnv.txt | |
| Checking if uname_r is set in /boot/uEnv.txt... | |
| gpio: pin 56 (gpio 56) value is 1 | |
| Running uname_boot ... | |
| loading /boot/vmlinuz-5.10.59-ti-r15 ... | |
| 10916352 bytes read in 716 ms (14.5 MiB/s) | |
| debug: [enable_uboot_overlays=1] ... | |
| debug: [enable_uboot_cape_universal=1] ... | |
| debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ... | |
| uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... | |
| uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... | |
| loading /boot/dtbs/5.10.59-ti-r15/am335x-boneblack-uboot-univ.dtb ... | |
| 213952 bytes read in 65 ms (3.1 MiB/s) | |
| uboot_overlays: [fdt_buffer=0x60000] ... | |
| uboot_overlays: loading /boot/dtbs/5.10.59-ti-r15/overlays/BB-ADC-00A0.dtbo ... | |
| 645 bytes read in 122 ms (4.9 KiB/s) | |
| uboot_overlays: loading /boot/dtbs/5.10.59-ti-r15/overlays/BB-BONE-eMMC1-01-00A0.dtbo ... | |
| 1605 bytes read in 121 ms (12.7 KiB/s) | |
| uboot_overlays: loading /boot/dtbs/5.10.59-ti-r15/overlays/BB-HDMI-TDA998x-00A0.dtbo ... | |
| 5321 bytes read in 117 ms (43.9 KiB/s) | |
| loading /boot/initrd.img-5.10.59-ti-r15 ... | |
| 7685235 bytes read in 517 ms (14.2 MiB/s) | |
| debug: [console=ttyS0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] ... | |
| debug: [bootz 0x82000000 0x88080000:754473 88000000] ... | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Loading Ramdisk to 8f8ab000, end 8ffff473 ... OK | |
| Loading Device Tree to 8f813000, end 8f8aafff ... OK | |
| Starting kernel ... | |
| [ 0.115651] l3-aon-clkctrl:0000:0: failed to disable | |
| [ 11.127156] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! | |
| [ 11.170554] gpio-of-helper ocp:cape-universal: Failed to get gpio property of 'P8_03' | |
| [ 11.170585] gpio-of-helper ocp:cape-universal: Failed to create gpio entry | |
| [ 11.629097] davinci-mcasp 48038000.mcasp: IRQ common not found | |
| [ 11.712139] omap_voltage_late_init: Voltage driver support not added | |
| Debian GNU/Linux 11 BeagleBone ttyS0 | |
| BeagleBoard.org Debian Bullseye IoT Image 2021-09-01 | |
| Support: https://bbb.io/debian | |
| default username:password is [debian:temppwd] | |
| BeagleBone login: root | |
| Password: | |
| The programs included with the Debian GNU/Linux system are free software; | |
| the exact distribution terms for each program are described in the | |
| individual files in /usr/share/doc/*/copyright. | |
| Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | |
| permitted by applicable law. | |
| root@BeagleBone:~# ifconfig -a | |
| can0: flags=128<NOARP> mtu 16 | |
| unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 10 (UNSPEC) | |
| RX packets 0 bytes 0 (0.0 B) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 0 bytes 0 (0.0 B) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| device interrupt 49 | |
| can1: flags=128<NOARP> mtu 16 | |
| unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 10 (UNSPEC) | |
| RX packets 0 bytes 0 (0.0 B) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 0 bytes 0 (0.0 B) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| device interrupt 50 | |
| eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 | |
| inet 192.168.2.20 netmask 255.255.252.0 broadcast 192.168.3.255 | |
| inet6 fe80::b81f:6a1a:3858:10a9 prefixlen 64 scopeid 0x20<link> | |
| ether b0:d5:cc:fc:03:fc txqueuelen 1000 (Ethernet) | |
| RX packets 263 bytes 37916 (37.0 KiB) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 31 bytes 4210 (4.1 KiB) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 | |
| inet 127.0.0.1 netmask 255.0.0.0 | |
| inet6 ::1 prefixlen 128 scopeid 0x10<host> | |
| loop txqueuelen 1000 (Local Loopback) | |
| RX packets 17 bytes 1974 (1.9 KiB) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 17 bytes 1974 (1.9 KiB) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| usb0: flags=4098<BROADCAST,MULTICAST> mtu 1500 | |
| ether 06:e8:2c:e8:15:2f txqueuelen 1000 (Ethernet) | |
| RX packets 0 bytes 0 (0.0 B) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 0 bytes 0 (0.0 B) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| root@BeagleBone:~# ping -c3 www.google.com | |
| PING www.google.com (142.250.191.228) 56(84) bytes of data. | |
| 64 bytes from ord38s32-in-f4.1e100.net (142.250.191.228): icmp_seq=1 ttl=117 time=28.8 ms | |
| 64 bytes from ord38s32-in-f4.1e100.net (142.250.191.228): icmp_seq=2 ttl=117 time=29.8 ms | |
| 64 bytes from ord38s32-in-f4.1e100.net (142.250.191.228): icmp_seq=3 ttl=117 time=29.5 ms | |
| --- www.google.com ping statistics --- | |
| 3 packets transmitted, 3 received, 0% packet loss, time 2005ms | |
| rtt min/avg/max/mdev = 28.778/29.327/29.754/0.407 ms | |
| root@BeagleBone:~# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment