Start and end gcode script for the Anet A8 or AM8. Paste it into Octoprint (Settings -> GCode scripts).
Last active
July 14, 2023 08:56
-
-
Save RuckertSolutions/76a6de62a34298a957b2ee2f3dbecfec to your computer and use it in GitHub Desktop.
Anet A8 / AM8 GCode scripts
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
M104 S0 ; turn off extruder | |
M140 S0 ; turn off heatbed | |
M107 ; turn off fan | |
G91 ; relative positioning | |
G1 Z25 ; raise head 25mm | |
G90 ; back to absolute positioning | |
G1 X0 Y220; home X axis and push Y forward | |
M84 ; disable motors |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
G21 ; set units to millimeters | |
G90 ; use absolute positioning | |
M82 ; absolute extrusion mode | |
M104 S{material_print_temperature_layer_0} ; set extruder temp | |
M140 S{material_bed_temperature_layer_0} ; set bed temp | |
G28 X0 Y0 ;move X/Y to min endstops | |
G28 Z0 ;move Z to min endstops | |
G29 | |
M190 S{material_bed_temperature_layer_0} ; wait for bed temp | |
M109 S{material_print_temperature_layer_0} ; wait for extruder temp | |
G0 X0 Y15 F9000 ; Go to front | |
G0 Z0.15 ; Drop to bed | |
G92 E0 ; zero the extruded length | |
G1 X40 E25 F500 ; Extrude 25mm of filament in a 4cm line | |
G92 E0 ; zero the extruded length | |
G1 E-1 F500 ; Retract a little | |
G1 X80 F4000 ; Quickly wipe away from the filament line | |
G1 Z0.3 ; Raise and begin printing. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment