Created
June 18, 2024 01:39
-
-
Save Sakura286/7facfe06239020a1ee46685ef2f11dd0 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Xshell 7 (Build 0151) | |
Copyright (c) 2020 NetSarang Computer, Inc. All rights reserved. | |
Type `help' to learn how to use Xshell prompt. | |
[C:\~]$ | |
Connecting to COM19... | |
Connected. | |
pll config ok | |
now traning rate is 6400MT | |
ddr traning success_0 | |
version:0.6;disable ECC | |
ddr self test OK | |
OpenSBI v1.0 | |
____ _____ ____ _____ | |
/ __ \ / ____| _ \_ _| | |
| | | |_ __ ___ _ __ | (___ | |_) || | | |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |
| |__| | |_) | __/ | | |____) | |_) || |_ | |
\____/| .__/ \___|_| |_|_____/|____/_____| | |
| | | |
|_| | |
Platform Name : ESWIN EIC770X | |
Platform Features : none | |
Platform HART Count : 4 | |
Platform IPI Device : aclint-mswi | |
Platform Timer Device : aclint-mtimer @ 1000000Hz | |
Platform Console Device : uart8250 | |
Platform HSM Device : --- | |
Platform Reboot Device : eswin_eic770x_reset | |
Platform Shutdown Device : eswin_eic770x_reset | |
Firmware Base : 0x80000000 | |
Firmware Size : 300 KB | |
Runtime SBI Version : 0.3 | |
Domain0 Name : root | |
Domain0 Boot HART : 3 | |
Domain0 HARTs : 0*,1*,2*,3* | |
Domain0 Region00 : 0x0000000002000000-0x000000000200ffff (I) | |
Domain0 Region01 : 0x0000000080000000-0x000000008007ffff () | |
Domain0 Region02 : 0x0000001000000000-0x0000007fffffffff (M) | |
Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff (R,W,X) | |
Domain0 Next Address : 0x0000000080200000 | |
Domain0 Next Arg1 : 0x00000000f8000000 | |
Domain0 Next Mode : S-mode | |
Domain0 SysReset : yes | |
Boot HART ID : 3 | |
Boot HART Domain : root | |
Boot HART ISA : rv64imafdcsuhx | |
Boot HART Features : scounteren,mcounteren,mcountinhibit,sscofpmf | |
Boot HART PMP Count : 16 | |
Boot HART PMP Granularity : 4096 | |
Boot HART PMP Address Bits: 39 | |
Boot HART MHPM Count : 4 | |
Boot HART MIDELEG : 0x0000000000002666 | |
Boot HART MEDELEG : 0x0000000000f00509 | |
U-Boot 2021.01-gc1383410 (Jun 03 2024 - 13:55:42 +0000) | |
CPU: rv64imafdc_zba_zbb | |
Model: ESWIN EIC7700 EVB | |
DRAM: 16 GiB | |
Fn:eswin_sdhci_bind L:394 | |
llMMC: sdhci@50450000: 0, sd@50460000: 1 | |
Loading Environment from MMC... trying mode MMC High Speed (52MHz) width 8 (at 52 MHz) | |
OK | |
In: serial | |
Out: serial | |
Err: serial | |
eswin_dc_probe: enter. | |
[display_init]Eswin UBOOT DRM driver version: v1.0.1 | |
eswin plat is:1 | |
xfer: num: 2, addr: 0x50 | |
xfer: num: 2, addr: 0x50 | |
Monitor has basic audio support | |
mode:1920x1080 | |
[display_init]Detailed mode clock 148500 kHz, flags[5] | |
H: 1920 2008 2052 2200 | |
V: 1080 1084 1089 1125 | |
bus_format: 100a | |
[eswin_dc_init]regs=0x00000000502c0000, regsbak=0x00000000fd1dc8e0 | |
[eswin_dc_init]:layer:0 hdisplay = 1920, htotal = 2200.hsync_st:2008.hsync_end:2052 | |
[eswin_dc_init]: vdisplay = 1080, vtotal = 1125.vsync_st:1084.vsync_end:1089 | |
[eswin_dc_init]: need scaler. | |
[eswin_dc_init]: src_width = 1280, src_height = 720. | |
CEA mode used vic=16 | |
final pixclk = 148500000 tmdsclk = 148500000 | |
PHY powered down in 0 iterations | |
PHY PLL locked 1 iterations | |
PHY powered down in 1 iterations | |
PHY PLL locked 1 iterations | |
sink has audio support | |
hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500 | |
Error: Bad gzipped data | |
Error: error uncompressed logo_bmp ! | |
failed to display uboot bmp logo | |
Net: | |
Warning: ethernet@50400000 (eth0) using random MAC address - 72:0f:52:67:d7:e5 | |
eth0: ethernet@50400000 | |
Hit any key to stop autoboot: 0 | |
starting USB... | |
Bus usb1@50490000: Register 2000140 NbrPorts 2 | |
Starting the controller | |
USB XHCI 1.10 | |
scanning bus usb1@50490000 for devices... 2 USB Device(s) found | |
scanning usb for storage devices... 0 Storage Device(s) found | |
Retrieving file: /extlinux/extlinux.conf | |
881 bytes read in 13 ms (65.4 KiB/s) | |
U-Boot menu | |
1: RockOS GNU/Linux 5.17.0-rc7-win2030 | |
2: RockOS GNU/Linux 5.17.0-rc7-win2030 (rescue target) | |
Enter choice: 1 | |
1: RockOS GNU/Linux 5.17.0-rc7-win2030 | |
Retrieving file: /initrd.img-5.17.0-rc7-win2030 | |
46191858 bytes read in 3171 ms (13.9 MiB/s) | |
Retrieving file: /vmlinuz-5.17.0-rc7-win2030 | |
6746900 bytes read in 472 ms (13.6 MiB/s) | |
append: root=/dev/mmcblk0p7 console=ttyS0,115200 root=/dev/mmcblk0p7 rootfstype=ext4 rootwait rw earlycon selinux=0 LANG=en_US.UTF-8 | |
Retrieving file: /dtbs/linux-image-5.17.0-rc7-win2030/eswin/eic7700-evb-a2.dtb | |
146087 bytes read in 31 ms (4.5 MiB/s) | |
Uncompressing Kernel Image | |
Moving Image from 0x84000000 to 0x80200000, end=817f9000 | |
## Flattened Device Tree blob at 88000000 | |
Booting using the fdt blob at 0x88000000 | |
Using Device Tree in place at 0000000088000000, end 0000000088026aa6 | |
Starting kernel ... | |
trying mode MMC High Speed (52MHz) width 8 (at 52 MHz) | |
[ 0.000000] Linux version 5.17.0-rc7-win2030 (builder@rockos-riscv-builder) (riscv64-linux-gnu-gcc-13 (Ubuntu 13.2.0-4ubuntu3) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.41) #2024.06.13.15.10+e1cb4a0e2 SMP Thu Jun 13 15:11:14 UTC 2024 | |
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 | |
[ 0.000000] Machine model: ESWIN EIC7700 | |
[ 0.000000] earlycon: uart0 at MMIO32 0x0000000050900000 (options '115200n8') | |
[ 0.000000] printk: bootconsole [uart0] enabled | |
[ 0.000000] efi: UEFI not found. | |
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000470000000, size 256 MiB | |
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
[ 0.000000] Reserved memory: created eswin reserve memory at 0x00000000b0000000, size 128 MiB | |
[ 0.000000] OF: reserved mem: initialized node secure_memory_nid_0_part_0, compatible id eswin-reserve-memory | |
[ 0.000000] Reserved memory: created eswin reserve memory at 0x00000000b8000000, size 128 MiB | |
[ 0.000000] OF: reserved mem: initialized node secure_memory_nid_0_part_1, compatible id eswin-reserve-memory | |
[ 0.000000] Reserved memory: created eswin reserve memory at 0x0000000140000000, size 10240 MiB | |
[ 0.000000] OF: reserved mem: initialized node mmz_nid_0_part_0, compatible id eswin-reserve-memory | |
[ 0.000000] Reserved memory: created eswin reserve memory at 0x00000003c0000000, size 1024 MiB | |
[ 0.000000] OF: reserved mem: initialized node mmz_nid_0_part_1, compatible id eswin-reserve-memory | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000ffffffff] | |
[ 0.000000] Normal [mem 0x0000000100000000-0x000000047fffffff] | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000911fffff] | |
[ 0.000000] node 0: [mem 0x0000000091200000-0x00000000931fffff] | |
[ 0.000000] node 0: [mem 0x0000000093200000-0x000000009fffffff] | |
[ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000a00fffff] | |
[ 0.000000] node 0: [mem 0x00000000a0100000-0x00000000afffffff] | |
[ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000bfffffff] | |
[ 0.000000] node 0: [mem 0x00000000c0000000-0x00000000ffffefff] | |
[ 0.000000] node 0: [mem 0x00000000fffff000-0x00000000ffffffff] | |
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] | |
[ 0.000000] node 0: [mem 0x0000000140000000-0x00000003ffffffff] | |
[ 0.000000] node 0: [mem 0x0000000400000000-0x000000047fffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000047fffffff] | |
[ 0.000000] On node 0, zone DMA32: 512 pages in unavailable ranges | |
[ 0.000000] SBI specification v0.3 detected | |
[ 0.000000] SBI implementation ID=0x1 Version=0x10000 | |
[ 0.000000] SBI TIME extension detected | |
[ 0.000000] SBI IPI extension detected | |
[ 0.000000] SBI RFENCE extension detected | |
[ 0.000000] SBI SRST extension detected | |
[ 0.000000] SBI HSM extension detected | |
[ 0.000000] riscv: ISA extensions abcdefhimnrs | |
[ 0.000000] riscv: ELF capabilities acdfim | |
[ 0.000000] percpu: Embedded 18 pages/cpu s33576 r8192 d31960 u73728 | |
[ 0.000000] pcpu-alloc: s33576 r8192 d31960 u73728 alloc=18*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4128264 | |
[ 0.000000] Kernel command line: root=/dev/mmcblk0p7 console=ttyS0,115200 root=/dev/mmcblk0p7 rootfstype=ext4 rootwait rw earlycon selinux=0 LANG=en_US.UTF-8 earlycon=sbi console=ttyS0,115200n8 clk_ignore_unused cma_pernuma=0x2000000 disable_bypass=false | |
[ 0.000000] Unknown kernel command line parameters "selinux=0 LANG=en_US.UTF-8 cma_pernuma=0x2000000 disable_bypass=false", will be passed to user space. | |
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] fixmap : 0xffff8d7ffee00000 - 0xffff8d7fff000000 (2048 kB) | |
[ 0.000000] pci io : 0xffff8d7fff000000 - 0xffff8d8000000000 ( 16 MB) | |
[ 0.000000] vmemmap : 0xffff8d8000000000 - 0xffff8f8000000000 (2097152 MB) | |
[ 0.000000] vmalloc : 0xffff8f8000000000 - 0xffffaf8000000000 (33554432 MB) | |
[ 0.000000] lowmem : 0xffffaf8000000000 - 0xffffaf83ffe00000 (16382 MB) | |
[ 0.000000] kernel : 0xffffffff80000000 - 0xffffffffffffffff (2047 MB) | |
[ 0.000000] Memory: 4307880K/16775168K available (8238K kernel code, 5043K rwdata, 4096K rodata, 2209K init, 904K bss, 12205144K reserved, 262144K cma-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] rcu: Hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. | |
[ 0.000000] rcu: RCU debug extended QS entry/exit. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] riscv-intc: 64 local interrupts mapped | |
[ 0.000000] plic: interrupt-controller@c000000: mapped 520 interrupts with 4 handlers for 8 contexts. | |
[ 0.000000] random: get_random_bytes called from start_kernel+0x4da/0x6de with crng_init=0 | |
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [3] | |
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns | |
[ 0.000002] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns | |
[ 0.009027] Console: colour dummy device 80x25 | |
[ 0.013610] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000) | |
[ 0.023855] pid_max: default: 32768 minimum: 301 | |
[ 0.028700] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
[ 0.036450] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
[ 0.046159] cblist_init_generic: Setting adjustable number of callback queues. | |
[ 0.053518] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.059807] ASID allocator disabled (0 bits) | |
[ 0.064257] rcu: Hierarchical SRCU implementation. | |
[ 0.070022] ---win2030_tbu_powr_priv_init:646, TCU_NODE_STATUS=0x00000000000001e0 | |
[ 0.077641] win2030_tbu_powr_priv_init finished! | |
[ 0.082434] EFI services will not be available. | |
[ 0.087510] smp: Bringing up secondary CPUs ... | |
[ 0.094096] smp: Brought up 1 node, 4 CPUs | |
[ 0.101476] devtmpfs: initialized | |
[ 0.115584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 0.125524] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
[ 0.143449] pinctrl core: initialized pinctrl subsystem | |
[ 0.148916] smmu_dbg, sifive_l2_init:316, DCACHE 0 was found! | |
[ 0.154902] L2CACHE: No. of Banks in the cache: 4 | |
[ 0.159670] L2CACHE: No. of ways per bank: 16 | |
[ 0.164075] L2CACHE: Sets per bank: 1024 | |
[ 0.168037] L2CACHE: Bytes per cache block: 64 | |
[ 0.172533] L2CACHE[0]: Index of the largest way enabled: 15 | |
[ 0.179195] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
[ 0.186687] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | |
[ 0.194733] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
[ 0.202844] audit: initializing netlink subsys (disabled) | |
[ 0.208363] audit: type=2000 audit(0.124:1): state=initialized audit_enabled=0 res=1 | |
[ 0.292240] eswin-pinctrl 51600080.pinctrl: eswin pinctrl initialized | |
[ 0.300482] platform soc:es_wb: Fixing up cyclic dependency with 502c0000.display_control | |
[ 0.308840] platform soc:dsi-output: Fixing up cyclic dependency with 502c0000.display_control | |
[ 0.317646] platform 50270000.mipi_dsi: Fixing up cyclic dependency with soc:dsi-output | |
[ 0.325946] platform 502a0000.hdmi: Fixing up cyclic dependency with 50200000.i2s0 | |
[ 0.333628] platform 502a0000.hdmi: Fixing up cyclic dependency with 502c0000.display_control | |
[ 0.347609] pmu 51808000.power-controller: WIN2030 Power Manage Unit init... | |
[ 0.354770] pmu 51808000.power-controller: D0_PCIE power status is power on... | |
[ 0.362078] pmu 51808000.power-controller: D0_DSP1 power status is power on... | |
[ 0.369384] pmu 51808000.power-controller: D0_VI power status is power on... | |
[ 0.376505] pmu 51808000.power-controller: D0_VO power status is power on... | |
[ 0.383626] pmu 51808000.power-controller: D0_CODEC power status is power on... | |
[ 0.391019] pmu 51808000.power-controller: D0_DSP2 power status is power on... | |
[ 0.398324] pmu 51808000.power-controller: D0_DSP3 power status is power on... | |
[ 0.405715] iommu: Default domain type: Translated | |
[ 0.410654] iommu: DMA domain TLB invalidation policy: strict mode | |
[ 0.417085] vgaarb: loaded | |
[ 0.419953] SCSI subsystem initialized | |
[ 0.423819] libata version 3.00 loaded. | |
[ 0.427799] usbcore: registered new interface driver usbfs | |
[ 0.433372] usbcore: registered new interface driver hub | |
[ 0.438757] usbcore: registered new device driver usb | |
[ 0.444163] i2c 0-0010: Fixing up cyclic dependency with 50210000.i2s1 | |
[ 0.450844] i2c 0-0011: Fixing up cyclic dependency with 50220000.i2s2 | |
[ 0.458027] mc: Linux media interface: v0.10 | |
[ 0.462366] videodev: Linux video capture interface: v2.00 | |
[ 0.468022] EDAC MC: Ver: 3.0.0 | |
[ 0.471911] win2030-noc 52060000.d0_cfg_noc: Begin initialization | |
[ 0.478186] win2030-noc 52060000.d0_cfg_noc: error policy: print | |
[ 0.484257] win2030-noc 52060000.d0_cfg_noc: no QoS config list | |
[ 0.490272] win2030-noc 52060000.d0_cfg_noc: enable error logging | |
[ 0.496432] win2030-noc 52060000.d0_cfg_noc: Error interrupt happen! | |
[ 0.502848] win2030-noc 52060000.d0_cfg_noc: ErrLog0 0x80030008 | |
[ 0.508831] win2030-noc 52060000.d0_cfg_noc: ErrLog1 0x0000081c | |
[ 0.514814] win2030-noc 52060000.d0_cfg_noc: ErrLog3 0x00000044 | |
[ 0.520797] win2030-noc 52060000.d0_cfg_noc: ErrLog5 0x00000020 | |
[ 0.526810] win2030-noc 52060000.d0_cfg_noc: timestamp: 4294892378: | |
[ 0.526810] ErrorLogger0: 0x80030008 | |
[ 0.526810] lock: Not Locked | |
[ 0.526810] OpCode: WR: data write with incrementing address | |
[ 0.526810] ErrCode: SLV (error source: Target): error detected by the Slave without any information or no Error | |
[ 0.526810] Len1: 3 | |
[ 0.526810] Format: NTTP v3.5 (Ok) | |
[ 0.526810] ErrorLogger1: 0x81c | |
[ 0.526810] InitFlow: snoc_cnoc/I/0 | |
[ 0.526810] TargetFlow: cnoc_ddrt0_ctrl/T/0 | |
[ 0.526810] TargetSubRange: 0 | |
[ 0.526810] SeqId: 1c | |
[ 0.526810] AbsoluteAddress: 0x52300044 | |
[ 0.526810] ErrorLogger3: 0x44 | |
[ 0.526810] AbsoluteAddress: 0 | |
[ 0.526810] ErrorLogger5: 0x20 | |
[ 0.526810] User_flag: | |
[ 0.526810] | |
[ 0.597352] win2030-noc: probe of 52060000.d0_cfg_noc failed with error -2 | |
[ 0.604340] win2030-noc 52081400.d0_llc_noc: Begin initialization | |
[ 0.610607] win2030-noc 52081400.d0_llc_noc: error policy: print | |
[ 0.616677] win2030-noc 52081400.d0_llc_noc: no QoS config list | |
[ 0.622964] win2030-noc 52081400.d0_llc_noc: enable error logging | |
[ 0.629123] win2030-noc: probe of 52081400.d0_llc_noc failed with error -2 | |
[ 0.636122] win2030-noc 52002c00.d0_sys_noc: Begin initialization | |
[ 0.642564] win2030-noc 52002c00.d0_sys_noc: error policy: print | |
[ 0.648657] win2030-noc 52002c00.d0_sys_noc: eswin,DSPT-qos-settings added to list(0) | |
[ 0.656587] win2030-noc 52002c00.d0_sys_noc: eswin,NPU-qos-settings added to list(0) | |
[ 0.664429] win2030-noc 52002c00.d0_sys_noc: eswin,SPISLV_TBU3-qos-settings added to list(0) | |
[ 0.673746] win2030-noc 52002c00.d0_sys_noc: enable error logging | |
[ 0.679906] win2030-noc: probe of 52002c00.d0_sys_noc failed with error -2 | |
[ 0.686922] win2030-noc 52021400.d0_media_noc: Begin initialization | |
[ 0.693370] win2030-noc 52021400.d0_media_noc: error policy: print | |
[ 0.699641] win2030-noc 52021400.d0_media_noc: eswin,GPU-qos-settings added to list(0) | |
[ 0.707667] win2030-noc 52021400.d0_media_noc: eswin,TBU2-qos-settings added to list(0) | |
[ 0.715780] win2030-noc 52021400.d0_media_noc: eswin,VC-qos-settings added to list(0) | |
[ 0.724020] win2030-noc 52021400.d0_media_noc: enable error logging | |
[ 0.730361] win2030-noc: probe of 52021400.d0_media_noc failed with error -2 | |
[ 0.737531] win2030-noc 52041400.d0_realtime_noc: Begin initialization | |
[ 0.744239] win2030-noc 52041400.d0_realtime_noc: error policy: print | |
[ 0.750765] win2030-noc 52041400.d0_realtime_noc: eswin,TBU0-qos-settings added to list(0) | |
[ 0.759142] win2030-noc 52041400.d0_realtime_noc: eswin,VO-qos-settings added to list(0) | |
[ 0.767613] win2030-noc 52041400.d0_realtime_noc: enable error logging | |
[ 0.774217] win2030-noc: probe of 52041400.d0_realtime_noc failed with error -2 | |
[ 0.781717] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.788114] mctp: management component transport protocol core | |
[ 0.794023] NET: Registered PF_MCTP protocol family | |
[ 0.799115] clocksource: Switched to clocksource riscv_clocksource | |
[ 0.808266] NET: Registered PF_INET protocol family | |
[ 0.813489] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
[ 0.826858] tcp_listen_portaddr_hash hash table entries: 8192 (order: 6, 327680 bytes, linear) | |
[ 0.835781] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
[ 0.844402] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
[ 0.852898] TCP: Hash tables configured (established 131072 bind 65536) | |
[ 0.859734] UDP hash table entries: 8192 (order: 7, 786432 bytes, linear) | |
[ 0.867016] UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes, linear) | |
[ 0.874844] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
[ 0.880807] RPC: Registered named UNIX socket transport module. | |
[ 0.886811] RPC: Registered udp transport module. | |
[ 0.891573] RPC: Registered tcp transport module. | |
[ 0.896332] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.902850] NET: Registered PF_XDP protocol family | |
[ 0.907878] Trying to unpack rootfs image as initramfs... | |
[ 0.908179] workingset: timestamp_bits=46 max_order=21 bucket_order=0 | |
[ 0.923413] NFS: Registering the id_resolver key type | |
[ 0.928549] Key type id_resolver registered | |
[ 0.932784] Key type id_legacy registered | |
[ 0.936882] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.943662] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
[ 0.951425] io scheduler mq-deadline registered | |
[ 0.956017] io scheduler kyber registered | |
[ 0.960682] start plist test | |
[ 0.965898] end plist test | |
[ 0.971101] eswin-dsp-subsys 52280400.dsp_subsys: es_dsp_subsys_probe | |
[ 0.979759] mpq8785 1-0010: min_uV:700000,max_uV:1100000,uV_offset:0,min_uA:20000000,max_uA:40000000,over_voltage_limits:0,1100000,0 | |
[ 0.994830] NPU_SVCC: IC does not support requested over voltage limits | |
[ 1.001531] NPU_SVCC: IC does not support requested under voltage limits | |
[ 1.008310] NPU_SVCC: IC does not support requested temperature limits | |
[ 1.018331] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
[ 1.025379] printk: console [ttyS0] disabled | |
[ 1.049797] 50900000.serial: ttyS0 at MMIO 0x50900000 (irq = 12, base_baud = 12500000) is a 16550A | |
[ 1.058902] printk: console [ttyS0] enabled | |
[ 1.058902] printk: console [ttyS0] enabled | |
[ 1.067278] printk: bootconsole [uart0] disabled | |
[ 1.067278] printk: bootconsole [uart0] disabled | |
[ 1.076810] bus error of cause event: 9, accrued: 0x220, physical address: 0x50910000 | |
[ 1.096850] 50910000.serial: ttyS1 at MMIO 0x50910000 (irq = 13, base_baud = 12500000) is a 16550A | |
[ 1.106093] bus error of cause event: 9, accrued: 0x220, physical address: 0x50920000 | |
[ 1.126129] 50920000.serial: ttyS2 at MMIO 0x50920000 (irq = 14, base_baud = 12500000) is a 16550A | |
[ 1.137174] arm-smmu-v3 50c00000.iommu: ias 42-bit, oas 42-bit (features 0x00001ebf) | |
[ 1.147476] arm-smmu-v3 50c00000.iommu: allocated 65536 entries for cmdq | |
[ 1.156832] arm-smmu-v3 50c00000.iommu: allocated 32768 entries for evtq | |
[ 1.166294] arm-smmu-v3 50c00000.iommu: allocated 65536 entries for priq | |
[ 1.177241] arm-smmu-v3 50c00000.iommu: msi_domain absent - falling back to wired irqs | |
[ 1.268200] es_drm soc:display-subsystem: bound 502c0000.display_control (ops 0xffffffff80e66e70) | |
[ 1.277152] dw-hdmi-eswin 502a0000.hdmi: eswin platform:1 | |
[ 1.282962] dw-hdmi-eswin 502a0000.hdmi: Detected HDMI TX controller v2.14a with HDCP (DWC HDMI 2.0 TX PHY) | |
[ 1.292997] i2c i2c-3: of_i2c: modalias failure on /soc/hdmi@502a0000/ports | |
[ 1.299988] i2c i2c-3: Failed to create I2C device for /soc/hdmi@502a0000/ports | |
[ 1.307322] dw-hdmi-eswin 502a0000.hdmi: registered DesignWare HDMI I2C bus driver | |
[ 1.314939] dw-hdmi-eswin 502a0000.hdmi: intr status 0x3d | |
[ 1.315271] dw-hdmi-eswin 502a0000.hdmi: failed to create debugfs dir! | |
[ 1.320365] dw-hdmi-eswin 502a0000.hdmi: dw hdmi plug in | |
[ 1.332265] dw-hdmi-hdcp dw-hdmi-hdcp.3.auto: dw_hdmi_hdcp_probe... | |
[ 1.338661] es_drm soc:display-subsystem: bound 502a0000.hdmi (ops 0xffffffff80e67cb8) | |
[ 1.346803] [drm] Initialized es_drm 1.0.0 20191101 for soc:display-subsystem on minor 0 | |
[ 1.356203] brd: module loaded | |
[ 1.360736] loop: module loaded | |
[ 1.365177] ahci 50420000.sata: Adding to iommu group 0 | |
[ 1.370560] ahci 50420000.sata: supply ahci not found, using dummy regulator | |
[ 1.377674] ahci 50420000.sata: supply phy not found, using dummy regulator | |
[ 1.384666] ahci 50420000.sata: supply target not found, using dummy regulator | |
[ 1.391946] eswin sata before reset control deasser | |
[ 1.396843] eswin sata after reset control deasser | |
[ 1.401694] win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
[ 1.407806] eswin_sata_sid_cfg success | |
[ 1.411565] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 1.417181] ahci 50420000.sata: forcing port_map 0x0 -> 0x1 | |
[ 1.422790] ahci 50420000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode | |
[ 1.423239] dw-hdmi-eswin 502a0000.hdmi: read_hpd result: 1 | |
[ 1.431331] ahci 50420000.sata: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc sadm sds apst | |
[ 1.431915] scsi host0: ahci | |
[ 1.449616] ata1: SATA max UDMA/133 mmio [mem 0x50420000-0x5042ffff] port 0x100 irq 68 | |
[ 1.458340] eswin-bootspi 51800000.spi: ssi_max_xfer_size=32 | |
[ 1.467541] spi-nor spi0.0: w25q128fw (16384 Kbytes) | |
[ 1.526180] random: fast init done | |
[ 1.544755] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 1.777434] ata1: SATA link down (SStatus 0 SControl 300) | |
[ 2.094990] Freeing initrd memory: 45108K | |
[ 2.108442] eswin-bootspi 51800000.spi: fifo_len 256, polling mode. | |
[ 2.115404] win2030-eth-dwmac 50400000.ethernet: Cannot get CSR clock | |
[ 2.121862] win2030-eth-dwmac 50400000.ethernet: PTP uses main clock | |
[ 2.128340] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 2.134032] win2030-eth-dwmac 50400000.ethernet: User ID: 0x10, Synopsys ID: 0x52 | |
[ 2.141551] win2030-eth-dwmac 50400000.ethernet: DWMAC4/5 | |
[ 2.147056] win2030-eth-dwmac 50400000.ethernet: DMA HW capability register supported | |
[ 2.154898] win2030-eth-dwmac 50400000.ethernet: RX Checksum Offload Engine supported | |
[ 2.162741] win2030-eth-dwmac 50400000.ethernet: TX Checksum insertion supported | |
[ 2.170146] win2030-eth-dwmac 50400000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
[ 2.178521] win2030-eth-dwmac 50400000.ethernet: device MAC address 66:74:fc:8e:10:f7 | |
[ 2.186363] win2030-eth-dwmac 50400000.ethernet: Enabled L3L4 Flow TC (entries=4) | |
[ 2.193857] win2030-eth-dwmac 50400000.ethernet: Enabled RFS Flow TC (entries=10) | |
[ 2.201351] win2030-eth-dwmac 50400000.ethernet: Using 48 bits DMA width | |
[ 2.429170] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) | |
[ 2.438675] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) | |
[ 2.448742] win2030-eth-dwmac 50410000.ethernet: Cannot get CSR clock | |
[ 2.455201] win2030-eth-dwmac 50410000.ethernet: PTP uses main clock | |
[ 2.461627] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 2.467308] win2030-eth-dwmac 50410000.ethernet: User ID: 0x10, Synopsys ID: 0x52 | |
[ 2.474809] win2030-eth-dwmac 50410000.ethernet: DWMAC4/5 | |
[ 2.480310] win2030-eth-dwmac 50410000.ethernet: DMA HW capability register supported | |
[ 2.488151] win2030-eth-dwmac 50410000.ethernet: RX Checksum Offload Engine supported | |
[ 2.495992] win2030-eth-dwmac 50410000.ethernet: TX Checksum insertion supported | |
[ 2.503399] win2030-eth-dwmac 50410000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
[ 2.511775] win2030-eth-dwmac 50410000.ethernet: device MAC address 26:5d:8f:96:9c:a7 | |
[ 2.519617] win2030-eth-dwmac 50410000.ethernet: Enabled L3L4 Flow TC (entries=4) | |
[ 2.527115] win2030-eth-dwmac 50410000.ethernet: Enabled RFS Flow TC (entries=10) | |
[ 2.534609] win2030-eth-dwmac 50410000.ethernet: Using 48 bits DMA width | |
[ 2.761727] mdio_bus stmmac-1:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-1:00, irq=POLL) | |
[ 2.771232] mdio_bus stmmac-1:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-1:01, irq=POLL) | |
[ 2.781927] dwc3 50480000.dwc3: Adding to iommu group 1 | |
[ 2.787495] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 2.793098] win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
[ 2.799418] dwc3 50490000.dwc3: Adding to iommu group 2 | |
[ 2.804931] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 2.810535] win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
[ 2.817053] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 2.823611] ehci-pci: EHCI PCI platform driver | |
[ 2.828088] ehci-platform: EHCI generic platform driver | |
[ 2.833448] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 2.839653] ohci-pci: OHCI PCI platform driver | |
[ 2.844128] ohci-platform: OHCI generic platform driver | |
[ 2.849722] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller | |
[ 2.855282] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 | |
[ 2.863377] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000000000010010 | |
[ 2.872824] xhci-hcd xhci-hcd.4.auto: irq 150, io mem 0x50480000 | |
[ 2.878917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 | |
[ 2.887208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 2.894450] usb usb1: Product: xHCI Host Controller | |
[ 2.899343] usb usb1: Manufacturer: Linux 5.17.0-rc7-win2030 xhci-hcd | |
[ 2.905794] usb usb1: SerialNumber: xhci-hcd.4.auto | |
[ 2.910867] hub 1-0:1.0: USB hub found | |
[ 2.914642] hub 1-0:1.0: 1 port detected | |
[ 2.918671] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller | |
[ 2.924221] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2 | |
[ 2.931905] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed | |
[ 2.938476] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 2.946654] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17 | |
[ 2.954943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 2.962187] usb usb2: Product: xHCI Host Controller | |
[ 2.967077] usb usb2: Manufacturer: Linux 5.17.0-rc7-win2030 xhci-hcd | |
[ 2.973526] usb usb2: SerialNumber: xhci-hcd.4.auto | |
[ 2.978564] hub 2-0:1.0: USB hub found | |
[ 2.982335] hub 2-0:1.0: 1 port detected | |
[ 2.986395] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller | |
[ 2.991948] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3 | |
[ 3.000033] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000000000010010 | |
[ 3.009468] xhci-hcd xhci-hcd.5.auto: irq 151, io mem 0x50490000 | |
[ 3.015543] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 | |
[ 3.023835] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 3.031078] usb usb3: Product: xHCI Host Controller | |
[ 3.035968] usb usb3: Manufacturer: Linux 5.17.0-rc7-win2030 xhci-hcd | |
[ 3.042418] usb usb3: SerialNumber: xhci-hcd.5.auto | |
[ 3.047595] hub 3-0:1.0: USB hub found | |
[ 3.051371] hub 3-0:1.0: 1 port detected | |
[ 3.055390] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller | |
[ 3.060951] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4 | |
[ 3.068634] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed | |
[ 3.075204] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 3.083379] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17 | |
[ 3.091671] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 3.098913] usb usb4: Product: xHCI Host Controller | |
[ 3.103805] usb usb4: Manufacturer: Linux 5.17.0-rc7-win2030 xhci-hcd | |
[ 3.110256] usb usb4: SerialNumber: xhci-hcd.5.auto | |
[ 3.115347] hub 4-0:1.0: USB hub found | |
[ 3.119130] hub 4-0:1.0: 1 port detected | |
[ 3.123243] usbcore: registered new interface driver cdc_acm | |
[ 3.128925] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
[ 3.136979] usbcore: registered new interface driver cdc_wdm | |
[ 3.142730] usbcore: registered new interface driver uas | |
[ 3.148109] usbcore: registered new interface driver usb-storage | |
[ 3.154169] usbcore: registered new interface driver usbserial_generic | |
[ 3.160732] usbserial: USB Serial support registered for generic | |
[ 3.166791] usbcore: registered new interface driver cp210x | |
[ 3.172393] usbserial: USB Serial support registered for cp210x | |
[ 3.175130] usb 1-1: new low-speed USB device number 2 using xhci-hcd | |
[ 3.178360] usbcore: registered new interface driver ftdi_sio | |
[ 3.190541] usbserial: USB Serial support registered for FTDI USB Serial Device | |
[ 3.197952] usbcore: registered new interface driver keyspan | |
[ 3.203634] usbserial: USB Serial support registered for Keyspan - (without firmware) | |
[ 3.211491] usbserial: USB Serial support registered for Keyspan 1 port adapter | |
[ 3.218834] usbserial: USB Serial support registered for Keyspan 2 port adapter | |
[ 3.226178] usbserial: USB Serial support registered for Keyspan 4 port adapter | |
[ 3.233556] usbcore: registered new interface driver option | |
[ 3.239158] usbserial: USB Serial support registered for GSM modem (1-port) | |
[ 3.246249] usbcore: registered new interface driver oti6858 | |
[ 3.251930] usbserial: USB Serial support registered for oti6858 | |
[ 3.257967] usbcore: registered new interface driver pl2303 | |
[ 3.263566] usbserial: USB Serial support registered for pl2303 | |
[ 3.269524] usbcore: registered new interface driver qcserial | |
[ 3.275291] usbserial: USB Serial support registered for Qualcomm USB modem | |
[ 3.319122] usb 3-1: new low-speed USB device number 2 using xhci-hcd | |
[ 3.337898] usb 1-1: New USB device found, idVendor=09da, idProduct=2268, bcdDevice= 1.04 | |
[ 3.346094] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
[ 3.353243] usb 1-1: Product: USB Keyboard | |
[ 3.357350] usb 1-1: Manufacturer: SONiX | |
[ 3.474560] usb 3-1: New USB device found, idVendor=03f0, idProduct=134a, bcdDevice= 1.00 | |
[ 3.482755] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
[ 3.489905] usb 3-1: Product: HP USB Optical Mouse | |
[ 3.494708] usb 3-1: Manufacturer: PixArt | |
[ 3.515516] usbcore: registered new interface driver usbtest | |
[ 3.521675] eswin-rtc 51818000.rtc: registered as rtc0 | |
[ 3.526840] eswin-rtc 51818000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0) | |
[ 3.534909] i2c_dev: i2c /dev entries driver | |
[ 3.543036] ina2xx 2-0045: power monitor ina226 (Rshunt = 1000 uOhm) | |
[ 3.550224] ina2xx 2-0044: power monitor ina226 (Rshunt = 1000 uOhm) | |
[ 3.557406] ina2xx 2-0041: power monitor ina226 (Rshunt = 1000 uOhm) | |
[ 3.564584] ina2xx 2-0048: power monitor ina226 (Rshunt = 1000 uOhm) | |
[ 3.571277] EDAC MC0: Giving out device to module 1 controller synps_ddr_controller: DEV synps_edac (INTERRUPT) | |
[ 3.581504] EDAC MC1: Giving out device to module 1 controller synps_ddr_controller: DEV synps_edac (INTERRUPT) | |
[ 3.592097] sdhci: Secure Digital Host Controller Interface driver | |
[ 3.598304] sdhci: Copyright(c) Pierre Ossman | |
[ 3.602670] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 3.608539] sdhci-eswin 50450000.mmc: Adding to iommu group 3 | |
[ 3.608811] leds-gpio leds: Led gpio-109 renamed to gpio-109_1 due to name collision | |
[ 3.616489] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 3.622383] eswin-timer 51840000.timer: eswin_timer_probe | |
[ 3.627640] win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
[ 3.633076] Enter timer_irq_handler irq = 5b, time->mmio_base = ffff8f8005d48000 | |
[ 3.633225] eswin-timer 51848000.timer: eswin_timer_probe | |
[ 3.633357] eswin-timer 51850000.timer: eswin_timer_probe | |
[ 3.633471] eswin-timer 51858000.timer: eswin_timer_probe | |
[ 3.668280] input: SONiX USB Keyboard as /devices/platform/soc/soc:usb0@50480000/50480000.dwc3/xhci-hcd.4.auto/usb1/1-1/1-1:1.0/0003:09DA:2268.0001/input/input0 | |
[ 3.704792] mmc0: SDHCI controller on 50450000.mmc [50450000.mmc] using ADMA 64-bit | |
[ 3.739290] hid-generic 0003:09DA:2268.0001: input: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-xhci-hcd.4.auto-1/input0 | |
[ 3.755035] input: SONiX USB Keyboard Consumer Control as /devices/platform/soc/soc:usb0@50480000/50480000.dwc3/xhci-hcd.4.auto/usb1/1-1/1-1:1.1/0003:09DA:2268.0002/input/input1 | |
[ 3.827202] input: SONiX USB Keyboard System Control as /devices/platform/soc/soc:usb0@50480000/50480000.dwc3/xhci-hcd.4.auto/usb1/1-1/1-1:1.1/0003:09DA:2268.0002/input/input2 | |
[ 3.842954] hid-generic 0003:09DA:2268.0002: input: USB HID v1.11 Device [SONiX USB Keyboard] on usb-xhci-hcd.4.auto-1/input1 | |
[ 3.855801] input: PixArt HP USB Optical Mouse as /devices/platform/soc/soc:usb1@50490000/50490000.dwc3/xhci-hcd.5.auto/usb3/3-1/3-1:1.0/0003:03F0:134A.0003/input/input3 | |
[ 3.857024] mmc0: set delay:0x1b | |
[ 3.871014] hid-generic 0003:03F0:134A.0003: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-xhci-hcd.5.auto-1/input0 | |
[ 3.886253] usbcore: registered new interface driver usbhid | |
[ 3.891847] usbhid: USB HID core driver | |
[ 3.896163] eswin-mailbox 50a00000.mbox: register sucessfully | |
[ 3.902289] eswin-mailbox 50a20000.mbox: register sucessfully | |
[ 3.908407] eswin-mailbox 50a60000.mbox: register sucessfully | |
[ 3.914373] llc_spram 51c00000.llc: llc_probe start! | |
[ 3.919357] llc_spram 51c00000.llc: res_spram.start=0x59000000, max_size=0x400000, configured size=0x400000 | |
[ 3.939612] mmc0: set phase_code:0x1c | |
[ 3.949850] llc_spram 51c00000.llc: [0x178]=0xc0000020 [0x17c]=0x80000222 [0x180]=0x80002110 [0x184]=0x00000020 [0x418]=0x00000047 | |
[ 3.971704] mmc0: new HS400 MMC card at address 0001 | |
[ 3.976978] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB | |
[ 3.983501] mmcblk0: p1 p2 p3 p4 p5 p6 p7 | |
[ 3.988168] mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB | |
[ 3.993552] mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB | |
[ 3.998843] mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (244:0) | |
[ 4.055122] llc_spram 51c00000.llc: devm_llc_ops_register, done sucessfully! | |
[ 4.062201] llc_spram 51c00000.llc: SRAM pool: 4096 KiB @ vaddr 0xffff8f8006000000, phys 0x59000000 | |
[ 4.071333] llc_spram 51c00000.llc: __add_spram_heap, Done adding spram heap name:llc_spram0 | |
[ 4.079794] llc_spram 51c00000.llc: llc_probe Done! | |
[ 4.086351] es8328 0-0010: dev name:es8388-0 | |
[ 4.090648] es8328 0-0010: Failed to get eswin platform | |
[ 4.095887] es8328 0-0010: eswin platform:0 | |
[ 4.100182] es8328 0-0011: dev name:es8388-1 | |
[ 4.104498] es8328 0-0011: Failed to get eswin platform | |
[ 4.109737] es8328 0-0011: eswin platform:0 | |
[ 4.114390] i2s 50200000.i2s0: dev name:i2s0 | |
[ 4.118772] i2s 50200000.i2s0: could not register pcm: -517 | |
[ 4.124391] i2s 50210000.i2s1: dev name:i2s1 | |
[ 4.128685] i2s 50210000.i2s1: could not register pcm: -517 | |
[ 4.134293] i2s 50220000.i2s2: dev name:i2s2 | |
[ 4.138585] i2s 50220000.i2s2: could not register pcm: -517 | |
[ 4.144327] NET: Registered PF_PACKET protocol family | |
[ 4.149514] Key type dns_resolver registered | |
[ 4.154006] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers | |
[ 4.163329] Key type ._fscrypt registered | |
[ 4.167351] Key type .fscrypt registered | |
[ 4.171282] Key type fscrypt-provisioning registered | |
[ 4.177303] eswin-pcie 54000000.pcie: Adding to iommu group 4 | |
[ 4.183414] eswin-pcie 54000000.pcie: host bridge /soc/pcie@0x54000000 ranges: | |
[ 4.190681] eswin-pcie 54000000.pcie: IO 0x0040800000..0x0040ffffff -> 0x0040800000 | |
[ 4.198884] eswin-pcie 54000000.pcie: MEM 0x0041000000..0x004fffffff -> 0x0041000000 | |
[ 4.207078] eswin-pcie 54000000.pcie: MEM 0x8000000000..0x9fffffffff -> 0x8000000000 | |
[ 4.215523] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 4.339198] eswin-pcie 54000000.pcie: iATU unroll: enabled | |
[ 4.344702] eswin-pcie 54000000.pcie: Detected iATU regions: 8 outbound, 4 inbound | |
[ 5.352390] eswin-pcie 54000000.pcie: Phy link never came up | |
[ 5.358119] eswin-pcie 54000000.pcie: PCI host bridge to bus 0000:00 | |
[ 5.364486] pci_bus 0000:00: root bus resource [bus 00-ff] | |
[ 5.369989] pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff] (bus address [0x40800000-0x40ffffff]) | |
[ 5.379670] pci_bus 0000:00: root bus resource [mem 0x41000000-0x4fffffff] | |
[ 5.386563] pci_bus 0000:00: root bus resource [mem 0x8000000000-0x9fffffffff pref] | |
[ 5.394255] pci 0000:00:00.0: [1fe1:2030] type 01 class 0x060400 | |
[ 5.400278] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x07ffffff] | |
[ 5.406565] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x000fffff] | |
[ 5.412889] pci 0000:00:00.0: supports D1 D2 | |
[ 5.417166] pci 0000:00:00.0: PME# supported from D0 D1 D3hot | |
[ 5.427864] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
[ 5.434512] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4fffffff] | |
[ 5.441315] pci 0000:00:00.0: BAR 1: assigned [mem 0x41000000-0x410fffff] | |
[ 5.448117] pci 0000:00:00.0: PCI bridge to [bus 01] | |
[ 5.453328] pcieport 0000:00:00.0: Adding to iommu group 5 | |
[ 5.868890] pcieport 0000:00:00.0: AER: enabled with IRQ 152 | |
[ 5.874685] dw_axi_dmac_platform 50430000.dma-controller-hsp: Adding to iommu group 6 | |
[ 5.882699] win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
[ 5.888817] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 5.894606] dw_axi_dmac_platform 50430000.dma-controller-hsp: DesignWare AXI DMA Controller, 12 channels | |
[ 5.904184] dw_axi_dmac_platform 518c0000.dma-controller-aon: Adding to iommu group 7 | |
[ 5.912196] win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
[ 5.918311] dw_axi_dmac_platform 518c0000.dma-controller-aon: success to config dma streamID(26) for dma-controller-aon@0x518c0000! | |
[ 5.930168] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 5.936003] dw_axi_dmac_platform 518c0000.dma-controller-aon: DesignWare AXI DMA Controller, 16 channels | |
[ 5.946537] spi-nor spi1.0: w25q128fw (16384 Kbytes) | |
[ 5.958245] spi-nor spi1.1: w25q128fw (16384 Kbytes) | |
[ 5.968247] i2s 50200000.i2s0: dev name:i2s0 | |
[ 5.972646] i2s 50200000.i2s0: comp1:0x24c007e, comp2:0x48c | |
[ 5.978238] i2s 50200000.i2s0: eswin platform:1 | |
[ 5.982780] audio_proc_module_init enter. | |
[ 5.986969] es_audio_proc: initialized | |
[ 5.990881] i2s 50210000.i2s1: dev name:i2s1 | |
[ 5.995214] i2s 50210000.i2s1: comp1:0x24c007e, comp2:0x48c | |
[ 6.000805] i2s 50210000.i2s1: eswin platform:1 | |
[ 6.005469] i2s 50220000.i2s2: dev name:i2s2 | |
[ 6.009790] i2s 50220000.i2s2: comp1:0x24c007e, comp2:0x48c | |
[ 6.015385] i2s 50220000.i2s2: eswin platform:1 | |
[ 6.020157] i2c_designware 51830000.i2c: DMA channel TX dma1chan8-8 | |
[ 6.026459] i2c_designware 51830000.i2c: DMA channel RX dma1chan9-9 | |
[ 6.034865] rtc-pcf8563 4-0051: low voltage detected, date/time is not reliable. | |
[ 6.042332] rtc-pcf8563 4-0051: registered as rtc1 | |
[ 6.288382] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: sink widget Capture overwritten | |
[ 6.299831] eswin-sdhci-sdio 50460000.mmc: Adding to iommu group 8 | |
[ 6.299854] eswin-sdhci-sdio 50470000.mmc: Adding to iommu group 9 | |
[ 6.300439] clk: Not disabling unused clocks | |
[ 6.300450] ALSA device list: | |
[ 6.300455] #0: graphcard0 | |
[ 6.300460] #1: graphcard1 | |
[ 6.300464] #2: graphcard2 | |
[ 6.308328] win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
[ 6.314495] win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
[ 6.316550] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 6.319512] win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
[ 6.367401] mmc1: SDHCI controller on 50460000.mmc [50460000.mmc] using ADMA 64-bit | |
[ 6.396513] mmc2: SDHCI controller on 50470000.mmc [50470000.mmc] using ADMA 64-bit | |
[ 6.404741] Freeing unused kernel image (initmem) memory: 2208K | |
[ 6.410737] Run /init as init process | |
[ 6.414409] with arguments: | |
[ 6.417384] /init | |
[ 6.419662] with environment: | |
[ 6.422807] HOME=/ | |
[ 6.425171] TERM=linux | |
[ 6.427884] selinux=0 | |
[ 6.430504] LANG=en_US.UTF-8 | |
[ 6.433739] cma_pernuma=0x2000000 | |
[ 6.437409] disable_bypass=false | |
Loading, please wait... | |
Starting systemd-udevd version 256~rc3-7 | |
[ 6.464076] mmc2: Got command interrupt 0x00000001 even though no command operation was in progress. | |
[ 6.473238] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== | |
[ 6.479692] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000105 | |
[ 6.486144] mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 | |
[ 6.492597] mmc2: sdhci: Argument: 0x80000c08 | Trn mode: 0x00000000 | |
[ 6.499048] mmc2: sdhci: Present: 0x03fa0000 | Host ctl: 0x00000001 | |
[ 6.505501] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 | |
[ 6.511954] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47 | |
[ 6.518406] mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 | |
[ 6.524858] mmc2: sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003 | |
[ 6.531310] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 | |
[ 6.537762] mmc2: sdhci: Caps: 0x3f6a6881 | Caps_1: 0x08012077 | |
[ 6.544214] mmc2: sdhci: Cmd: 0x0000341a | Max curr: 0x00101010 | |
[ 6.550666] mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 | |
[ 6.557118] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
[ 6.563570] mmc2: sdhci: Host ctl2: 0x00000000 | |
[ 6.568023] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 | |
[ 6.575171] mmc2: sdhci: ============================================ | |
[ 6.594836] mmc2: Got command interrupt 0x00000001 even though no command operation was in progress. | |
[ 6.603994] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== | |
[ 6.610447] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000105 | |
[ 6.616899] mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 | |
[ 6.623351] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 | |
[ 6.629802] mmc2: sdhci: Present: 0x03fa0000 | Host ctl: 0x00000001 | |
[ 6.636254] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 | |
[ 6.642706] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47 | |
[ 6.649158] mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 | |
[ 6.655609] mmc2: sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003 | |
[ 6.662061] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 | |
[ 6.668513] mmc2: sdhci: Caps: 0x3f6a6881 | Caps_1: 0x08012077 | |
[ 6.674965] mmc2: sdhci: Cmd: 0x00000502 | Max curr: 0x00101010 | |
[ 6.681417] mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 | |
[ 6.687869] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
[ 6.694320] mmc2: sdhci: Host ctl2: 0x00000000 | |
[ 6.698773] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 | |
[ 6.705922] mmc2: sdhci: ============================================ | |
[ 6.712846] mmc2: Got command interrupt 0x00000001 even though no command operation was in progress. | |
[ 6.721999] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== | |
[ 6.728450] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000105 | |
[ 6.734902] mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 | |
[ 6.741353] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 | |
[ 6.747805] mmc2: sdhci: Present: 0x03fa0000 | Host ctl: 0x00000001 | |
[ 6.754257] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 | |
[ 6.760708] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47 | |
[ 6.767160] mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 | |
[ 6.773611] mmc2: sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003 | |
[ 6.780062] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 | |
[ 6.786514] mmc2: sdhci: Caps: 0x3f6a6881 | Caps_1: 0x08012077 | |
[ 6.792966] mmc2: sdhci: Cmd: 0x00000502 | Max curr: 0x00101010 | |
[ 6.799418] mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 | |
[ 6.805870] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
[ 6.808383] win2030-eth-dwmac 50410000.ethernet end1: renamed from eth1 | |
[ 6.812320] mmc2: sdhci: Host ctl2: 0x00000000 | |
[ 6.812327] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 | |
[ 6.812339] mmc2: sdhci: ============================================ | |
[ 6.837003] dw-hdmi-eswin 502a0000.hdmi: intr status 0x1 | |
[ 6.842355] dw-hdmi-eswin 502a0000.hdmi: dw hdmi plug out | |
[ 6.873658] win2030-eth-dwmac 50400000.ethernet end0: renamed from eth0 | |
[ 6.925777] dw-hdmi-eswin 502a0000.hdmi: intr status 0x1 | |
[ 6.931142] dw-hdmi-eswin 502a0000.hdmi: dw hdmi plug in | |
[ 6.933198] mmc2: Got command interrupt 0x00000001 even though no command operation was in progress. | |
[ 6.945599] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== | |
[ 6.952051] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000105 | |
[ 6.958504] mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 | |
[ 6.964957] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 | |
[ 6.971409] mmc2: sdhci: Present: 0x03fa0000 | Host ctl: 0x00000001 | |
[ 6.977861] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 | |
[ 6.984313] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x0000f447 | |
[ 6.990765] mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 | |
[ 6.997217] mmc2: sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003 | |
[ 7.003669] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 | |
[ 7.010120] mmc2: sdhci: Caps: 0x3f6a6881 | Caps_1: 0x08012077 | |
[ 7.016573] mmc2: sdhci: Cmd: 0x00000502 | Max curr: 0x00101010 | |
[ 7.023025] mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 | |
[ 7.029477] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
[ 7.035928] mmc2: sdhci: Host ctl2: 0x00000000 | |
[ 7.040381] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 | |
[ 7.047529] mmc2: sdhci: ============================================ | |
Begin: Loading essential drivers ... done. | |
Begin: Running /scripts/init-premount ... Linux version 5.17.0-rc7-win2030 (builder@rockos-riscv-builder) (riscv64-linux-gnu-gcc-13 (Ubuntu 13.2.0-4ubuntu3) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.41) #2024.06.13.15.10+e1cb4a0e2 SMP Thu Jun 13 15:11:14 UTC 2024 | |
OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 | |
Machine model: ESWIN EIC7700 | |
earlycon: uart0 at MMIO32 0x0000000050900000 (options '115200n8') | |
printk: bootconsole [uart0] enabled | |
efi: UEFI not found. | |
Reserved memory: created CMA memory pool at 0x0000000470000000, size 256 MiB | |
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
Reserved memory: created eswin reserve memory at 0x00000000b0000000, size 128 MiB | |
OF: reserved mem: initialized node secure_memory_nid_0_part_0, compatible id eswin-reserve-memory | |
Reserved memory: created eswin reserve memory at 0x00000000b8000000, size 128 MiB | |
OF: reserved mem: initialized node secure_memory_nid_0_part_1, compatible id eswin-reserve-memory | |
Reserved memory: created eswin reserve memory at 0x0000000140000000, size 10240 MiB | |
OF: reserved mem: initialized node mmz_nid_0_part_0, compatible id eswin-reserve-memory | |
Reserved memory: created eswin reserve memory at 0x00000003c0000000, size 1024 MiB | |
OF: reserved mem: initialized node mmz_[ 7.215247] EXT4-fs (mmcblk0p7): recovery complete | |
nid_0_part_1, co[ 7.221219] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Quota mode: disabled. | |
mpatible id eswin-reserve-memory | |
Zone ranges: | |
DMA32 [mem 0x0000000080200000-0x00000000ffffffff] | |
Normal [mem 0x0000000100000000-0x000000047fffffff] | |
Movable zone start for each node | |
Early memory node ranges | |
node 0: [mem 0x0000000080200000-0x00000000911fffff] | |
node 0: [mem 0x0000000091200000-0x00000000931fffff] | |
node 0: [mem 0x0000000093200000-0x000000009fffffff] | |
node 0: [mem 0x00000000a0000000-0x00000000a00fffff] | |
node 0: [mem 0x00000000a0100000-0x00000000afffffff] | |
node 0: [mem 0x00000000b0000000-0x00000000bfffffff] | |
node 0: [mem 0x00000000c0000000-0x00000000ffffefff] | |
node 0: [mem 0x00000000fffff000-0x00000000ffffffff] | |
node 0: [mem 0x0000000100000000-0x000000013fffffff] | |
node 0: [mem 0x0000000140000000-0x00000003ffffffff] | |
node 0: [mem 0x0000000400000000-0x000000047fffffff] | |
Initmem setup node 0 [mem 0x0000000080200000-0x000000047fffffff] | |
On node 0, zone DMA32: 512 pages in unavailable ranges | |
SBI specification v0.3 detected | |
SBI implementation ID=0x1 Version=0x10000 | |
SBI TIME extension detected | |
SBI IPI extension detected | |
SBI RFENCE extension detected | |
SBI SRST extension detected | |
SBI HSM extension detected | |
riscv: ISA extensions abcdefhimnrs | |
riscv: ELF capabilities acdfim | |
percpu: Embedded 18 pages/cpu s33576 r8192 d31960 u73728 | |
pcpu-alloc: s33576 r8192 d31960 u73728 alloc=18*4096 | |
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
Built 1 zonelists, mobility grouping on. Total pages: 4128264 | |
Kernel command line: root=/dev/mmcblk0p7 console=ttyS0,115200 root=/dev/mmcblk0p7 rootfstype=ext4 rootwait rw earlycon selinux=0 LANG=en_US.UTF-8 earlycon=sbi console=ttyS0,115200n8 clk_ignore_unused cma_pernuma=0x2000000 disable_bypass=false | |
Unknown kernel command line parameters "selinux=0 LANG=en_US.UTF-8 cma_pernuma=0x2000000 disable_bypass=false", will be passed to user space. | |
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) | |
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
done. | |
mem auto-init: stack:all(zero), heap alloc:off, heap free:off | |
Virtual kernel memory layout: | |
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. | |
Begin: Running /scripts/local-premount ... done. | |
Warning: fsck not present, so skipping root file system | |
done. | |
Begin: Running /scripts/local-bottom ... done. | |
Begin: Running /scripts/init-bottom ... fixmap : 0xffff8d7ffee00000 - 0xffff8d7fff000000 (2048 kB) | |
pci io : 0xffff8d7fff000000 - 0xffff8d8000000000 ( 16 MB) | |
vmemmap : 0xffff8d8000000000 - 0xffff8f8000000000 (2097152 MB) | |
vmalloc : 0xffff8f8000000000 - 0xffffaf8000000000 (33554432 MB) | |
lowmem : 0xffffaf8000000000 - 0xffffaf83ffe00000 (16382 MB) | |
kernel : 0xffffffff80000000 - 0xffffffffffffffff (2047 MB) | |
Memory: 4307880K/16775168K available (8238K kernel code, 5043K rwdata, 4096K rodata, 2209K init, 904K bss, 12205144K reserved, 262144K cma-reserved) | |
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
rcu: Hierarchical RCU implementation. | |
rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. | |
rcu: RCU debug extended QS entry/exit. | |
Tracing variant of Tasks RCU enabled. | |
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
NR_IRQS:[ 7.585182] systemd[1]: System time before build time, advancing clock. | |
64, nr_irqs: 64, preallocated irqs: 0 | |
riscv-intc: 64 local interrupts mapped | |
plic: interrupt-controller@c000000: mapped 520 interrupts with 4 handlers for 8 contexts. | |
random: get_random_bytes called from start_kernel+0x4da/0x6de with crng_init=0 | |
riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [3] | |
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns | |
sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns | |
Console: colour dummy device 80x25 | |
Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
cblist_init_generic: Setting adjustable number of callback queues. | |
cblist_init_generic: Setting shift to 2 and lim to 1. | |
ASID allocator disabled (0 bits) | |
rcu: Hierarchical SRCU implementation. | |
---win2030_tbu_powr_priv_init:646, TCU_NODE_STATUS=0x00000000000001e0 | |
win2030_tbu_powr_priv_init finished! | |
done. | |
EFI services will not be available. | |
smp: Bringing up secondary CPUs ... | |
smp: Brought up 1 node, 4 CPUs | |
devtmpfs: initialized | |
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
pinctrl core: initialized pinctrl subsystem | |
smmu_dbg, sifive_l2_init:316, DCACHE 0 was found! | |
L2CACHE: No. of Banks in the cache: 4 | |
L2CACHE: No. of ways per bank: 16 | |
L2CACHE: Sets per bank: 1024 | |
L2CACHE: Bytes per cache block: 64 | |
L2CACHE[0]: Index of the largest way enabled: 15 | |
NET: Registered [ 7.779918] NET: Registered PF_INET6 protocol family | |
PF_NETLINK/PF_ROUTE protocol family | |
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | |
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
audit: initializing netlink subsys (disabled) | |
audit: type=2000 audit(0.124:1): state=initialized audit_enabled=0 res=1 | |
eswin-pinctrl 51600080.pinctrl: eswin pinctrl initialized | |
platform soc:es_wb: Fixing up cyclic dependency with 502c0000.display_control | |
platform soc:dsi-outpu[ 7.833007] Segment Routing with IPv6 | |
t: Fixing up cyc[ 7.838154] RPL Segment Routing with IPv6 | |
lic dependency w[ 7.843569] In-situ OAM (IOAM) with IPv6 | |
ith 502c0000.display_control | |
platform 50270000.mipi_dsi: Fixing up cyclic dependency with soc:dsi-output | |
platform 502a0000.hdmi: Fixing up cyclic dependency with 50200000.i2s0 7.866437] systemd[1]: systemd 256~rc3-7 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE) | |
52002c00.d0_sys_[ 7.899748] systemd[1]: Detected architecture riscv64. | |
noc: error policy: print | |
7.908164] systemd[1]: Hostname set to <rockos-eswin>. | |
0;21;39mwin2030-noc 52002c00.d0_sys_noc: eswin,DSPT-qos-settings added to list(0) | |
win2030-noc 52002c00.d0_sys_noc: eswin,NPU-qos-settings added to list(0) | |
win2030-noc 52002c00.d0_sys_noc: eswin,SPISLV_TBU3-qos-settings added to list(0) | |
win2030-noc 52002c00.d0_sys_noc: enable error logging | |
win2030-noc: probe of 52002c00.d0_sys_noc failed with error -2 | |
win2030-noc 52021400.d0_media_noc: Begin initialization | |
win2030-noc 52021400.d0_media_noc: error policy: print | |
win2030-noc 52021400.d0_media_noc: eswin,GPU-qos-settings added to list(0) | |
win2030-noc 52021400.d0_media_noc: eswin,TBU2-qos-settings added to list(0) | |
win2030-noc 52021400.d0_media_noc: eswin,VC-qos-settings added to list(0) | |
win2030-noc 52021400.d0_media_noc: enable error logging | |
win2030-noc: probe of 52021400.d0_media_noc failed with error -2 | |
win2030-noc 52041400.d0_realtime_noc: Begin initialization | |
win2030-noc 52041400.d0_realtime_noc: error policy: print | |
win2030-noc 52041400.d0_realtime_noc: eswin,TBU0-qos-settings added to list(0) | |
win2030-noc 52041400.d0_realtime_noc: eswin,VO-qos-settings added to list(0) | |
win2030-noc 52041400.d0_realtime_noc: enable error logging | |
win2030-noc: probe of 52041400.d0_realtime_noc failed with error -2 | |
Advanced Linux Sound Architecture Driver Initialized. | |
mctp: management component transport protocol core | |
NET: Registered PF_MCTP protocol family | |
clocksource: Switched to [ 8.061513] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported. | |
clocksource riscv_clocksource | |
NET: Registered PF_INET protocol family | |
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
tcp_listen_portaddr_hash hash table entries: 8192 (order: 6, 327680 bytes, linear) | |
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
TCP: Hash tables configured (established 131072 bind 65536) | |
UDP hash table entries: 8192 (order: 7, 786432 bytes, linear) | |
UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes, linear) | |
NET: Registered PF_UNIX/PF_LOCAL protocol family | |
RPC: Registered named UNIX socket transport module. | |
RPC: Registered udp transport module. | |
RPC: Registered tcp transport module. | |
RPC: Registered tcp NFSv4.1 backchannel transport module. | |
NET: Registered PF_XDP protocol family | |
Trying to unpack rootfs image as initramfs... | |
workingset: timestamp_bits=46 max_order=21 bucket_order=0 | |
NFS: Registering the id_resolver key type | |
Key type id_resolver registered | |
Key type id_legacy registered | |
nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
io scheduler mq-deadline registered | |
io scheduler kyber registered | |
start plist test | |
end plist test | |
eswin-dsp-subsys 52280400.dsp_subsys: es_dsp_subsys_probe | |
mpq8785 1-0010: min_uV:700000,max_uV:1100000,uV_offset:0,min_uA:20000000,max_uA:40000000,over_voltage_limits:0,1100000,0 | |
NPU_SVCC: IC does not support requested over voltage limits | |
NPU_SVCC: IC does not support requested under voltage limits | |
NPU_SVCC: IC does not support requested temperature limits | |
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
printk: console [ttyS0] disabled | |
bus error of cause event: 9, accrued: 0x220, physical address: 0x50900000 | |
bus error of cause event: 9, accrued: 0x220, physical address: 0x50900014 | |
50900000.serial: ttyS0 at MMIO 0x50900000 (irq = 12, base_baud = 12500000) is a 16550A | |
Welcome to Debian GNU/Linux trixie/sid! | |
printk: console [ttyS0] enabled | |
printk: bootconsole [uart0] disabled | |
bus error of cause event: 9, accrued: 0x220, physical address: 0x50910000 | |
50910000.serial: ttyS1 at MMIO 0x50910000 (irq = 13, base_baud = 12500000) is a 16550A | |
bus error of cause event: 9, accrued: 0x220, physical address: 0x50920000 | |
50920000.serial: ttyS2 at MMIO 0x50920000 (irq = 14, base_baud = 12500000) is a 16550A | |
arm-smmu-v3 50c00000.iommu: ias 42-bit, oas 42-bit (features 0x00001ebf) | |
arm-smmu-v3 50c00000.iommu: allocated 65536 entries for cmdq | |
arm-smmu-v3 50c00000.iommu: allocated 32768 entries for evtq | |
arm-smmu-v3 50c00000.iommu: allocated 65536 entries for priq | |
arm-smmu-v3 50c00000.iommu: msi_domain absent - falling back to wired irqs | |
es_drm soc:display-subsystem: bound 502c0000.display_control (ops 0xffffffff80e66e70) | |
dw-hdmi-eswin 502a0000.hdmi: eswin platform:1 | |
dw-hdmi-eswin 502a0000.hdmi: Detected HDMI TX controller v2.14a with HDCP (DWC HDMI 2.0 TX PHY) | |
i2c i2c-3: of_i2c: modalias failure on /soc/hdmi@502a0000/ports | |
i2c i2c-3: Failed to create I2C device for /soc/hdmi@502a0000/ports | |
dw-hdmi-eswin 502a0000.hdmi: registered DesignWare HDMI I2C bus [ 8.412629] systemd[1]: Queued start job for default target graphical.target. | |
driver | |
dw-hdmi-eswin 502a0000.hdmi: intr status 0x3d | |
dw-hdmi-eswin 502a0000.hdmi: failed to create debugfs dir! 8.433103] systemd[1]: Created slice system-getty.slice - Slice /system/getty. | |
m | |
dw-[ 8.441947] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. | |
hdmi-eswin 502a0[ 8.451012] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. | |
000.hdmi: dw hdm[ 8.460894] systemd[1]: Created slice user.slice - User and Session Slice. | |
i plug in | |
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. | |
[0;21;39mdw-hdmi[ 8.480442] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). | |
-hdcp dw-hdmi-hd[ 8.500971] systemd[1]: Expecting device dev-hvc0.device - /dev/hvc0... | |
cp.3.auto: dw_hd[ 8.508976] systemd[1]: Expecting device dev-mmcblk0p5.device - /dev/mmcblk0p5... | |
mi_hdcp_probe...[ 8.517832] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0... | |
[ 8.526055] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. | |
es_drm soc:displ[ 8.536323] systemd[1]: Reached target remote-fs.target - Remote File Systems. | |
ay-subsystem: bo[ 8.544879] systemd[1]: Reached target slices.target - Slice Units. | |
und 502a0000.hdm[ 8.552546] systemd[1]: Reached target swap.target - Swaps. | |
i (ops 0xfffffff[ 8.559513] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. | |
f80e67cb8) | |
[drm] Initialized es_d[ 8.572071] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. | |
rm 1.0.0 2019110[ 8.582104] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. | |
1 for soc:displa[ 8.592177] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). | |
y-subsystem on m[ 8.602453] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. | |
inor 0 | |
8.610953] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). | |
21;39mbrd: modul[ 8.626010] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). | |
e loaded | |
8.641039] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. | |
0;21;39mloop: mo[ 8.650522] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. | |
[ 8.659927] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). | |
ahci 50420000.sata: A[ 8.677842] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... | |
dding to iommu group 0 | |
8.688198] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... | |
21;33mahci 50420[ 8.697310] systemd[1]: sys-kernel-debug.mount - Kernel Debug File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/debug). | |
000.sata: supply[ 8.713093] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). | |
ahci not found, using dummy reg[ 8.731761] systemd[1]: Mounting tmp.mount - Temporary Directory /tmp... | |
ulator | |
ahci 50420[ 8.741198] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... | |
000.sata: supply phy not found, [ 8.752907] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... | |
using dummy regulator | |
8.763873] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... | |
1;33mahci 50420000.sata: supply [ 8.774697] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... | |
target not found, using dummy re[ 8.784939] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... | |
gulator | |
eswin sat[ 8.796368] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... | |
a before reset control deasser 8.806771] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... | |
0m | |
es[ 8.815263] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). | |
win sata after r[ 8.830965] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). | |
eset control deasser | |
win2030_dynm[ 8.857744] systemd[1]: Starting systemd-journald.service - Journal Service... | |
_sid_enable:111, NUMA_NO_NODE, single DIE | |
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... | |
[0;21;31meswin_s[ 8.877441] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). | |
ata_sid_cfg success | |
8.895848] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... | |
39mwin2030_tbu_p[ 8.905726] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). | |
ower:711, NUMA_NO_NODE, single D[ 8.923613] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... | |
IE | |
ahci 50420000.[ 8.936340] systemd-journald[242]: Collecting audit messages is disabled. | |
sata: forcing po[ 8.936394] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... | |
rt_map 0x0 -> 0x[ 8.938670] EXT4-fs (mmcblk0p7): re-mounted. Quota mode: disabled. | |
1 | |
ahci 50420000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mo[ 8.968477] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. | |
de | |
8.977193] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock. | |
9mdw-hdmi-eswin [ 8.986032] systemd[1]: Mounted tmp.mount - Temporary Directory /tmp. | |
502a0000.hdmi: r[ 8.994293] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. | |
ead_hpd result: [ 9.004636] systemd[1]: modprobe@configfs.service: Deactivated successfully. | |
1 | |
9.012592] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. | |
mahci 50420000.s[ 9.022718] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. | |
ata: flags: 64bi[ 9.030582] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. | |
t ncq sntf pm led clo only pmp p[ 9.040531] systemd[1]: modprobe@drm.service: Deactivated successfully. | |
io slum part ccc[ 9.049035] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. | |
sadm sds apst systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. | |
[0m | |
s[ 9.066341] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. | |
csi host0: ahci systemd[1]: modprobe@fuse.service: Deactivated successfully. | |
[0m | |
a[ 9.084548] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. | |
ta1: SATA max UD[ 9.093581] systemd[1]: modprobe@loop.service: Deactivated successfully. | |
MA/133 mmio [mem[ 9.101275] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. | |
0x50420000-0x50[ 9.110712] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. | |
42ffff] port 0x1[ 9.120013] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. | |
00 irq 68 | |
systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. | |
[0;21;39meswin-b[ 9.140645] systemd[1]: Started systemd-journald.service - Journal Service. | |
ootspi 51800000.spi: ssi_max_xfer_size=32 | |
spi-nor spi0.0: w25q128fw (16384 Kbytes) | |
random: fast init done | |
dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
ata1: SATA link down (SStatus 0 SControl 300) | |
Freeing initrd memory: 45108K | |
eswin-bootspi 51800000.spi: fifo_len 256, polling mode. | |
win2030-eth-dwmac 50400000.ethernet: Cannot get CSR clock | |
win2030-eth-dwmac 50400000.ethernet: PTP uses main[ 9.193511] systemd-journald[242]: Received client request to flush runtime journal. | |
clock | |
win2030_tb[ 9.204564] systemd-journald[242]: File /var/log/journal/ccf8b27c7a534c37a53d0a1c28320217/system.journal corrupted or uncleanly shut down, renaming and replacing. | |
u_power:711, NUMA_NO_NODE, single DIE | |
win2030-eth-dwmac 50400000.ethernet: User ID: 0x10, Synopsys ID: 0x52 | |
win2030-eth-dwmac 50400000.ethernet: DWMAC4/5 | |
[ OK ] Created slice system-getty.slice - Slice /system/getty. | |
[ OK ] Created slice system-modprobe.slice - Slice /system/modprobe. | |
[ OK ] Created slice system-serial\x2dget…slice - Slice /system/serial-g[ 9.260247] systemd-journald[242]: Failed to open system journal: No space left on device | |
etty. | |
[ OK ] Created slice user.slice - User and Session Slice. | |
[ OK ] Started systemd-ask-password-wall.…d Requests to Wall Directory Watch. | |
Expecting device dev-hvc0.device - /dev/hvc0... | |
Expecting device dev-mmcblk0p5.device - /dev/mmcblk0p5... | |
Expecting device dev-ttyS0.device - /dev/ttyS0... | |
[ OK ] Reached target integritysetup.targ… Local Integrity Protected Volumes. | |
[ OK ] Reached target remote-fs.target - Remote File Systems. | |
[ OK ] Reached target slices.target - Slice Units. | |
[ OK ] Reached target swap.target - Swaps. | |
[ OK ] Reached target veritysetup.target - Local Verity Protected Volumes. | |
[ OK ] Listening on systemd-creds.socket - Credential Encryption/Decryption. | |
[ OK ] Listening on systemd-initctl.socke…- initctl Compatibility Named Pipe. | |
[ OK ] Listening on systemd-journald-dev-…socket - Journal Socket (/dev/log). | |
[ OK ] Listening on systemd-journald.socket - Journal Sockets. | |
[ OK ] Listening on systemd-udevd-control.socket - udev Control Socket. | |
[ OK ] Listening on systemd-udevd-kernel.socket - udev Kernel Socket. | |
Mounting dev-mqueue.mount - POSIX Message Queue File System... | |
Mounting run-lock.mount - Legacy Locks Directory /run/lock... | |
Mounting tmp.mount - Temporary Directory /tmp... | |
Starting kmod-static-nodes.service…eate List of Static Device Nodes... | |
Starting modprobe@configfs.service - Load Kernel Module configfs... | |
Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... | |
Starting modprobe@drm.service - Load Kernel Module drm... | |
Starting modprobe@efi_pstore.servi… - Load Kernel Module efi_pstore... | |
Starting modprobe@fuse.service - Load Kernel Module fuse... | |
Starting modprobe@loop.service - Load Kernel Module loop... | |
Starting systemd-journald.service - Journal Service... | |
Starting systemd-modules-load.service - Load Kernel Modules... | |
Starting systemd-remount-fs.servic…unt Root and Kernel File Systems... | |
Starting systemd-udev-load-credent…Load udev Rules from Credentials... | |
Starting systemd-udev-trigger.service - Coldplug All udev Devices... | |
[ OK ] Mounted dev-mqueue.mount - POSIX Message Queue File System. | |
[ OK ] Mounted run-lock.mount - Legacy Locks Directory /run/lock. | |
[ OK ] Mounted tmp.mount - Temporary Directory /tmp. | |
[ OK ] Finished kmod-static-nodes.service…Create List of Static Device Nodes. | |
[ OK ] Finished modprobe@configfs.service - Load Kernel Module configfs. | |
[ OK ] Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. | |
[ OK ] Finished modprobe@drm.service - Load Kernel Module drm. | |
[ OK ] Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. | |
[ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse. | |
[ OK ] Finished modprobe@loop.service - Load Kernel Module loop. | |
[ OK ] Finished win2030-eth-dwmac 50400000.ethernet: DMA HW capability register supported | |
39msystemd-modules-load.service - Load Kernel Modules. | |
[ OK ] Finished systemd-remount-fs.servic…mount Root and Kernel File Systems. | |
[ OK ] Finished systemd-udev-load-credent…- Load udev Rules from Credentials. | |
[ OK ] Started systemd-journald.service - Journal Service. | |
Mounting sys-kernel-config.mount - Kernel Configuration File System... | |
Starting sys[ 9.653264] es_buddy_driver: loading out-of-tree module taints kernel. | |
temd-journal-flush.ser…sh Journal to Persistent Storage... | |
Starting systemd-random-seed.service - Load/Save OS Random Seed... | |
Starting systemd-sysctl.service - Apply Kernel Variables... | |
Starting systemd-tmpfiles-setup-de… Device Nodes in /dev gracefully... | |
[ OK ] Mounted sys-kernel-config.mount - Kernel Configuration File System. | |
[ OK ] Finished systemd-sysctl.service - Apply Kernel Variables. | |
[ OK ] Finished systemd-tmpfiles-setup-de…ic Device Nodes in /dev gracefully. | |
Starting systemd-tmpfiles-setup-de…eate Static Device Nodes in /dev... | |
[ OK ] Finished systemd-journal-flush.ser…lush Journal to Persistent Storage. | |
[ OK ] Finished systemd-tmpfiles-setup-de…Create Static Device Nodes in /dev. | |
[ OK ] Reached target local-fs-pre.target…Preparation for Local File Systems. | |
Starting systemd-udevd.service - R…ager for Device Events and Files... | |
[ OK ] Finished systemd-udev-trigger.service - Coldplug All udev Devices. | |
Starting ifupdown-pre.service - He…synchronize boot up for ifupdown... | |
[ OK ] Finished ifupdown-pre.service - He…o synchronize boot up for ifupdown. | |
[ OK ] Started systemd-udevd.service - Ru…anager for Device Events and Files. | |
Starting plymouth-start.service - Show Plymouth Boot Screen... | |
[ OK ] Found device dev-hvc0.device - /dev/hvc0. | |
[ OK ] Found device dev-ttyS0.device - /dev/ttyS0. | |
win2030-eth-dwmac 50400000.ethernet: RX Checksum Offload Engine supported | |
win2030-eth-dwmac 50400000.ethernet: TX Checksum insertion supported | |
win2030-eth-dwmac 50400000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
win2030-eth-dwmac 50400000.ethernet: device MAC address 66:74:fc:8e:10:f7 | |
win2030-eth-dwmac 50400000.ethernet: Enabled L3L4 Flow TC (entries=4) | |
win2030-eth-dwmac 50400000.ethernet: Enabled RFS Flow TC (entries=10) | |
win2030-eth-dwmac 50400000.ethernet: Using 48 bits DMA width | |
mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) | |
mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) | |
win2030-eth-dwmac 50410000.ethernet: Cannot get CSR c[ 9.895759] random: alsactl: uninitialized urandom read (4 bytes read) | |
lock | |
9.895823] random: alsactl: uninitialized urandom read (4 bytes read) | |
;39mwin2030-eth-[ 9.904120] random: alsactl: uninitialized urandom read (4 bytes read) | |
dwmac 50410000.ethernet: PTP uses main clock | |
win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
win2030-eth-dwmac 50410000.ethernet: User ID: 0x10, Synopsys ID: 0x52 | |
win2030-eth-dwmac 50410000.ethernet: DWMAC4/5 | |
win2030-eth-dwmac 50410000.ethernet: DMA HW capability register supported | |
win2030-eth-dwmac 50410000.ethernet: RX Checksum Offload Engine supported | |
win2030-eth-dwmac 50410000.ethernet: TX Checksum insertion supported | |
win2030-eth-dwmac 50410000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
win2030-eth-dwmac 50410000.ethernet: device MAC address 26:5d:8f:96:9c:a7 | |
win2030-eth-dwmac 50410000.ethernet: Enabled L3L4 Flow TC (entries=4) | |
win2030-eth-dwmac 50410000.ethernet: Enabled RFS Flow TC (entries=10) | |
win2030-eth-dwmac 50410000.ethernet: Using 48 bits DMA width | |
mdio_bus stmmac-1:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-1:00, irq=POLL) | |
mdio_bus stmmac-1:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-1:01, irq=POLL) | |
dwc3 50480000.dwc3: Adding to iommu group 1 | |
win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
dwc3 50490000.dwc3: Adding to iommu group 2 | |
win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ehci-pci: EHCI PCI platform driver | |
ehci-platform: EHCI generic platform driver | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
ohci-pci: OHCI PCI platform driver | |
ohci-platform: OHCI generic platform driver | |
xhci-hcd xhci-hcd.4.auto: xHCI Host Controller | |
xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 | |
xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000000000010010 | |
xhci-hcd xhci-hcd.4.auto: irq 150, io mem 0x50480000 | |
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 | |
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
usb usb1: Product: xHCI Host Controller | |
usb usb1: Manufacturer: Linux 5.17.0-rc7-win2030 xhci-hcd | |
usb usb1: SerialNumber: xhci-hcd.4.auto | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 1 port detected | |
xhci-hcd xhci-hcd.4.auto: xHCI Host Controller | |
xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2 | |
xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed | |
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17[ 10.185866] EXT4-fs (mmcblk0p5): recovery complete | |
usb [ 10.192363] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: disabled. | |
usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
usb usb2: Product: xHCI Host Controller | |
usb usb2: Manufacturer: Linux 5.17.0-rc7-win2030 xhci-hcd | |
usb usb2: SerialNumber: xhci-hcd.4.auto | |
hub 2-0:1.0: USB hub found | |
hub 2-0:1.0: 1 port detected | |
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller | |
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3 | |
xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000000000010010 | |
xhci-hcd xhci-hcd.5.auto: irq 151, io mem 0x50490000 | |
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 | |
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
usb usb3: Product: xHCI Host Controller | |
usb usb3: Manufacturer: Linux 5.17.0-rc7-win2030 xhci-hcd | |
usb usb3: SerialNumber: xhci-hcd.5.auto | |
[ OK ] Started plymouth-start.service - Show Plymouth Boot Screen. | |
[ OK ] Found device dev-mmcblk0p5.device - /dev/mmcblk0p5. | |
[ OK ] Started systemd-ask-password-plymo…quests to Plymouth Directory Watch. | |
[ OK ] Reached target cry[ 10.319138] __add_eswin_rsvmem_heap for mmz_nid_0_part_0 successfully! | |
[ 10.329353] __add_eswin_rsvmem_heap for mmz_nid_0_part_1 successfully! | |
Mounti[ 10.337834] __add_eswin_rsvmem_heap for secure_memory_nid_0_part_0 successfully! | |
ng boot[ 10.347011] __add_eswin_rsvmem_heap for secure_memory_nid_0_part_1 successfully! | |
.mount - /boot... | |
Starting modprobe@dm_mod.service [ 10.360500] riscv-dev-foo-a soc:E21@0: Adding to iommu group 10 | |
- Load Kernel Mo[ 10.360711] es_dewarp_driver: Unknown symbol debugfs_remove (err -2) | |
[ 10.367891] riscv-dev-foo-a soc:E21@0: ---------scpu_device_probe:587 | |
Start[ 10.375530] es_dewarp_driver: Unknown symbol debugfs_create_file (err -2) | |
ing modprobe@efi_pstore.servi… - Load Kernel Module efi_pstore... | |
Starting modprobe@fuse.service - Load Kernel Module fuse... | |
Starting modprobe@loop.service - Load Kernel Module loop... | |
[ OK ] Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. | |
[ OK ] Finished modprobe@loop.service - Load Kernel Module loop. | |
[ OK ] Mounted boot.mount - /boot. | |
[ OK ] Reached target local-fs.target - Local File Systems. | |
[ OK ] Listening on systemd-sysext.socket… System Extension Image Management. | |
Starting networking.service - Raise network interfaces... | |
Starting plymouth-read-write.servi…ymouth To Write Out Runtime Data... | |
Starting systemd-tmpfiles-setup.se…e Volatile Files and Directories... | |
[ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse. | |
hub 3-0:1.0: USB hub found | |
hub 3-0:1.0: 1 port detected | |
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller | |
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4 | |
xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed | |
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | |
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17 | |
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
usb usb4: Product: xHCI Host Controller | |
usb usb4: Manufacturer: Linux 5.17.0-rc7-win2030 xhci-hcd | |
usb usb4: SerialNumber: xhci-hcd.5.auto | |
hub 4-0:1.0: USB hub found | |
hub 4-0:1.0: 1 port detected | |
usbcore: registered new interface driver cdc_acm | |
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
usbcore: registered new interface driver cdc_wdm | |
usbcore: registered new interface driver uas | |
usbcore: registered new interface driver usb-storage | |
usbcore: registered new interface driver usbserial_generic | |
usbserial: USB Serial support registered for generic | |
usbcore: registered new interface driver cp210x | |
usbserial: USB Serial support registered for cp210x | |
usb 1-1: new low-speed USB device number 2 using xhci-hcd | |
usbcore: registered new interface driver ftdi_sio | |
usbserial: USB Serial support registered for FTDI USB Serial Device | |
usbcore: registered new interface driver keyspan | |
usbserial: USB Serial support registered for Keyspan - (without firmware) | |
usbserial: USB Serial support registered for Keyspan 1 port adapter | |
usbserial: USB Serial support registered for Keyspan 2 port adapter | |
usbserial: USB Serial support registered for Keyspan 4 port adapter | |
usbcore: registered new interface driver option | |
usbserial: USB Serial support registered for GSM modem (1-port) | |
[ OK ] Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. | |
[ OK ] Finished plymouth-read-write.servi…Plymouth To Write Out Runtime Data. | |
[ OK ] Finished networking.service - Raise network interfaces. | |
[ OK ] Finished systemd-tmpfiles-setup.se…ate Volatile Files and Directories. | |
Starting systemd-timesyncd.service - Network Time Synchronization... | |
Starting systemd-update-utmp.servi…ord System Boot/Shutdown in UTMP... | |
[ OK ] Finished systemd-update-utmp.servi…ecord System Boot/Shutdown in UTMP. | |
usbcore: registered new interface driver oti6858 | |
usbserial: USB Serial support registered for oti6858 | |
usbcore: registered new interface driver pl2303 | |
usbserial: USB Serial support registered for pl2303 | |
usbcore: registered new interface driver qcserial | |
usbserial: USB Serial support registered for Qualcomm USB modem | |
usb 3-1: new low-speed USB device number 2 using xhci-hcd | |
usb 1-1: New USB device found, idVendor=09da, idProduct=2268, bcdDevice= 1.04 | |
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 1-1: Product: USB Keyboard | |
usb 1-1: Manufacturer: SONiX | |
usb 3-1: New USB device found, idVendor=03f0, idProduct=134a, bcdDevice= 1.00 | |
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 3-1: Product: HP USB Optical Mouse | |
usb 3-1: Manufacturer: PixArt | |
usbcore: registered new interface driver usbtest | |
eswin-rtc 51818000.rtc: registered as rtc0 | |
eswin-rtc 51818000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0) | |
i2c_dev: i2c /dev entries driver | |
ina2xx 2-0045: power monitor ina226 (Rshunt = 1000 uOhm) | |
ina2xx 2-0044: power monitor ina226 (Rshunt = 1000 uOhm) | |
ina2xx 2-0041: power monitor ina226 (Rshunt = 1000 uOhm) | |
ina2xx 2-0048: power monitor ina226 (Rshunt = 1000 uOhm) | |
EDAC MC0: Giving out device to module 1 controller synps_ddr_controller: DEV synps_edac (INTERRUPT) | |
EDAC MC1: Giving out device to module 1 controller synps_ddr_controller: DEV synps_edac (INTERRUPT) | |
sdhci: Secure Digital Host Controller Interface driver | |
sdhci: Copyright(c) Pierre Ossman | |
sdhci-pltfm: SDHCI platform and OF driver helper | |
sdhci-eswin 50450000.mmc: Adding to iommu group 3 | |
leds-gpio leds: Led gpio-109 renamed to gpio-109_1 due to name collision | |
win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
eswin-timer 51840000.timer: eswin_timer_probe | |
win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
Enter timer_irq_handler irq = 5b, time->mmio_base = ffff8f8005d48000 | |
eswin-timer 51848000.timer: eswin_timer_probe | |
eswin-timer 51850000.timer: eswin_timer_probe | |
eswin-timer 51858000.timer: eswin_timer_probe | |
input: SONiX USB Keyboard as /devices/platform/soc/soc:usb0@50480000/50480000.dwc3/xhci-hcd.4.auto/usb1/1-1/1-1:1.0/0003:09DA:2268.0001/input/input0 | |
mmc0: SDHCI controller on 50450000.mmc [50450000.mmc] using ADMA 64-bit | |
hid-generic 0003:09DA:2268.0001: input: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-xhci-hcd.4.auto-1/input0 | |
input: SONiX USB Keyboard Consumer Control as /devices/platform/soc/soc:usb0@50480000/50480000.dwc3/xhci-hcd.4.auto/usb1/1-1/1-1:1.1/0003:09DA:2268.0002/input/input1 | |
input: SONiX USB Keyboard System Control as /devices/platform/soc/soc:usb0@50480000/50480000.dwc3/xhci-hcd.4.auto/usb1/1-1/1-1:1.1/0003:09DA:2268.0002/input/input2 | |
hid-generic 0003:09DA:2268.0002: input: USB HID v1.11 Device [SONiX USB Keyboard] on usb-xhci-hcd.4.auto-1/input1 | |
input: PixArt HP USB Optical Mouse as /devices/platform/soc/soc:usb1@50490000/50490000.dwc3/xhci-hcd.5.auto/usb3/3-1/3-1:1.0/0003:03F0:134A.0003/input/input3 | |
mmc0: set delay:0x1b | |
hid-generic 0003:03F0:134A.0003: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-xhci-hcd.5.auto-1/input0 | |
usbcore: registered new interface driver usbhid | |
usbhid: USB HID core driver | |
eswin-mailbox 50a00000.mbox: register sucessfully | |
eswin-mailbox 50a20000.mbox: register sucessfully | |
eswin-mailbox 50a60000.mbox: register sucessfully | |
llc_spram 51c00000.llc: llc_probe start! | |
llc_spram 51c00000.llc: res_spram.start=0x59000000, max_size=0x400000, configured size=0x400000 | |
mmc0: set phase_code:0x1c | |
llc_spram 51c00000.llc: [0x178]=0xc0000020 [0x17c]=0x80000222 [0x180]=0x80002110 [0x184]=0x00000020 [0x418]=0x00000047 | |
mmc0: new HS400 MMC card at address 0001 | |
mmcblk0: mmc0:0001 BJTD4R 29.1 GiB | |
mmcblk0: p1 p2 p3 p4 p5 p6 p7 | |
mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB | |
mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB | |
mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (244:0) | |
llc_spram 51c00000.llc: devm_llc_ops_register, done sucessfully! | |
llc_spram 51c00000.llc: SRAM pool: 4096 KiB @ vaddr 0xffff8f8006000000, phys 0x59000000 | |
llc_spram 51c00000.llc: __add_spram_heap, Done adding spram heap name:llc_spram0 | |
llc_spram 51c00000.llc: llc_probe Done! | |
es8328 0-0010: dev name:es8388-0 | |
es8328 0-0010: Failed to get eswin platform | |
es8328 0-0010: eswin platform:0 | |
es8328 0-0011: dev name:es8388-1 | |
es8328 0-0011: Failed to get eswin platform | |
es8328 0-0011: eswin platform:0 | |
i2s 50200000.i2s0: dev name:i2s0 | |
i2s 50200000.i2s0: could not register pcm: -517 | |
i2s 50210000.i2s1: dev name:i2s1 | |
i2s 50210000.i2s1: could not register pcm: -517 | |
i2s 50220000.i2s2: dev name:i2s2 | |
i2s 50220000.i2s2: could not register pcm: -517 | |
NET: Registered PF_PACKET protocol family | |
Key type dns_resolver registered | |
debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers | |
Key type ._fscrypt registered | |
Key type .fscrypt registered | |
Key type fscrypt-provisioning registered | |
eswin-pcie 54000000.pcie: Adding to iommu group 4 | |
eswin-pcie 54000000.pcie: host bridge /soc/pcie@0x54000000 ranges: | |
eswin-pcie 54000000.pcie: IO 0x0040800000..0x0040ffffff -> 0x0040800000 | |
eswin-pcie 54000000.pcie: MEM 0x0041000000..0x004fffffff -> 0x0041000000 | |
eswin-pcie 54000000.pcie: MEM 0x8000000000..0x9fffffffff -> 0x8000000000 | |
win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
eswin-pcie 54000000.pcie: iATU unroll: enabled | |
eswin-pcie 54000000.pcie: Detected iATU regions: 8 outbound, 4 inbound | |
eswin-pcie 54000000.pcie: Phy link never came up | |
eswin-pcie 54000000.pcie: PCI host bridge to bus 0000:00 | |
pci_bus 0000:00: root bus resource [bus 00-ff] | |
pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff] (bus address [0x40800000-0x40ffffff]) | |
pci_bus 0000:00: root bus resource [mem 0x41000000-0x4fffffff] | |
pci_bus 0000:00: root bus resource [mem 0x8000000000-0x9fffffffff pref] | |
pci 0000:00:00.0: [1fe1:2030] type 01 class 0x060400 | |
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x07ffffff] | |
pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x000fffff] | |
pci 0000:00:00.0: supports D1 D2 | |
pci 0000:00:00.0: PME# supported from D0 D1 D3hot | |
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4fffffff] | |
pci 0000:00:00.0: BAR 1: assigned [mem 0x41000000-0x410fffff] | |
pci 0000:00:00.0: PCI bridge to [bus 01] | |
pcieport 0000:00:00.0: Adding to iommu group 5 | |
pcieport 0000:00:00.0: AER: enabled with IRQ 152 | |
dw_axi_dmac_platform 50430000.dma-controller-hsp: Adding to iommu group 6 | |
win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
dw_axi_dmac_platform 50430000.dma-controller-hsp: DesignWare AXI DMA Controller, 12 channels | |
dw_axi_dmac_platform 518c0000.dma-controller-aon: Adding to iommu group 7 | |
win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
dw_axi_dmac_platform 518c0000.dma-controller-aon: success to config dma streamID(26) for dma-controller-aon@0x518c0000! | |
win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
dw_axi_dmac_platform 518c0000.dma-controller-aon: DesignWare AXI DMA Controller, 16 channels | |
spi-nor spi1.0: w25q128fw (16384 Kbytes) | |
spi-nor spi1.1: w25q128fw (16384 Kbytes) | |
i2s 50200000.i2s0: dev name:i2s0 | |
i2s 50200000.i2s0: comp1:0x24c007e, comp2:0x48c | |
i2s 50200000.i2s0: eswin platform:1 | |
audio_proc_module_init enter. | |
es_audio_proc: initialized | |
i2s 50210000.i2s1: dev name:i2s1 | |
i2s 50210000.i2s1: comp1:0x24c007e, comp2:0x48c | |
i2s 50210000.i2s1: eswin platform:1 | |
i2s 50220000.i2s2: dev name:i2s2 | |
i2s 50220000.i2s2: comp1:0x24c007e, comp2:0x48c | |
i2s 50220000.i2s2: eswin platform:1 | |
i2c_designware 51830000.i2c: DMA channel TX dma1chan8-8 | |
i2c_designware 51830000.i2c: DMA channel RX dma1chan9-9 | |
rtc-pcf8563 4-0051: low voltage detected, date/time is not reliable. | |
rtc-pcf8563 4-0051: registered as rtc1 | |
hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: sink widget Capture overwritten | |
eswin-sdhci-sdio 50460000.mmc: Adding to iommu group 8 | |
eswin-sdhci-sdio 50470000.mmc: Adding to iommu group 9 | |
clk: Not disabling unused clocks | |
ALSA device list: | |
#0: graphcard0 | |
#1: graphcard1 | |
#2: graphcard2 | |
win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
win2030_dynm_sid_enable:111, NUMA_NO_NODE, single DIE | |
win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
win2030_tbu_power:711, NUMA_NO_NODE, single DIE | |
mmc1: SDHCI controller on 50460000.mmc [50460000.mmc] using ADMA 64-bit | |
mmc2: SDHCI controller on 50470000.mmc [50470000.mmc] using ADMA 64-bit | |
Freeing unused kernel image (initmem) memory: 2208K | |
Run /init as init process | |
with arguments: | |
/init | |
with environment: | |
HOME=/ | |
TERM=linux | |
selinux=0 | |
LANG=en_US.UTF-8 | |
cma_pernuma=0x2000000 | |
disable_bypass=false | |
mmc2: Got command interrupt 0x00000001 even though no command operation was in progress. | |
mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== | |
mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000105 | |
mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 | |
mmc2: sdhci: Argument: 0x80000c08 | Trn mode: 0x00000000 | |
mmc2: sdhci: Present: 0x03fa0000 | Host ctl: 0x00000001 | |
mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 | |
mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47 | |
mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 | |
mmc2: sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003 | |
mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 | |
mmc2: sdhci: Caps: 0x3f6a6881 | Caps_1: 0x08012077 | |
mmc2: sdhci: Cmd: 0x0000341a | Max curr: 0x00101010 | |
mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 | |
mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
mmc2: sdhci: Host ctl2: 0x00000000 | |
mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 | |
mmc2: sdhci: ============================================ | |
mmc2: Got command interrupt 0x00000001 even though no command operation was in progress. | |
mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== | |
mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000105 | |
mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 | |
mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 | |
mmc2: sdhci: Present: 0x03fa0000 | Host ctl: 0x00000001 | |
mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 | |
mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47 | |
mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 | |
mmc2: sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003 | |
mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 | |
mmc2: sdhci: Caps: 0x3f6a6881 | Caps_1: 0x08012077 | |
mmc2: sdhci: Cmd: 0x00000502 | Max curr: 0x00101010 | |
mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 | |
mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
mmc2: sdhci: Host ctl2: 0x00000000 | |
mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 | |
mmc2: sdhci: ============================================ | |
mmc2: Got command interrupt 0x00000001 even though no command operation was in progress. | |
mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== | |
mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000105 | |
mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 | |
mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 | |
mmc2: sdhci: Present: 0x03fa0000 | Host ctl: 0x00000001 | |
mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 | |
mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47 | |
mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 | |
mmc2: sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003 | |
mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 | |
mmc2: sdhci: Caps: 0x3f6a6881 | Caps_1: 0x08012077 | |
mmc2: sdhci: Cmd: 0x00000502 | Max curr: 0x00101010 | |
mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 | |
mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
win2030-eth-dwmac 50410000.ethernet end1: renamed from eth1 | |
mmc2: sdhci: Host ctl2: [ 12.031403] DeviceConfigCreate:376, eswin print : read back aclk 800000000HZ | |
0x00000000 | |
[ 12.038887] eswin print DeviceConfigCreate: gpu clk enable ok | |
mmc2: [ 12.046009] eswin print DeviceConfigCreate: gpu clk disable ok | |
sdhci: ADMA Err: 0x00000000 | A[ 12.055644] eswin print : set aclk to 800000000HZ | |
DMA Ptr: 0x00000[ 12.060778] eswin print : read back aclk 800000000HZ | |
[ 12.067303] eswin print DeviceConfigCreate: gpu clk enable ok | |
mmc2:[ 12.075043] eswin print DeviceConfigCreate: gpu clk reset ok | |
sdhci: ========[ 12.081473] DeviceConfigCreate: --------------->dev_name=51400000.gpu | |
================[ 12.089305] DeviceConfigCreate: --------------->reg_base=51400000, reg_size=fffff | |
================[ 12.098170] DeviceConfigCreate: --------------->ui32IRQ=67 | |
==== | |
12.105081] PVR_K: 303: Read BVNC 30.3.408.101 from HW device registers | |
;39mdw-hdmi-eswi[ 12.113120] PVR_K: 303: RGX Device registered with BVNC 30.3.408.101 | |
n 502a0000.hdmi:[ 12.121322] [drm] Initialized pvr 1.18.6307965 20170530 for 51400000.gpu on minor 1 | |
intr status 0x1 | |
dw-hdmi-eswin 502a0000.hdmi: dw hdmi plug out | |
win2030-eth-dwmac 50400000.ethernet end0: renamed from eth0 | |
dw-hdmi-eswin 502a0000.hdmi: intr status 0x1 | |
dw-hdmi-eswin 502a0000.hdmi: dw hdmi plug in | |
mmc2: Got command interrupt 0x00000001 even though no command operation was in progress. | |
mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== | |
mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000105 | |
mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000[ 12.180143] random: avahi-daemon: uninitialized urandom read (4 bytes read) | |
000 | |
12.185601] random: alsactl: uninitialized urandom read (4 bytes read) | |
31mmmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 | |
mmc2: sdhci: Present: 0x03fa0000 | Host ctl: 0x00000001 | |
mmc2: sdhci: Power: 0x0000000f | Blk ga[ 12.212683] random: dbus-daemon: uninitialized urandom read (12 bytes read) | |
p: 0x00000000 | |
mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x0000f447 | |
mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 | |
mmc2: sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003 | |
mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 | |
mmc2: sdhci: Caps: 0x3f6a6881 | Caps_1: 0x08012077 | |
mmc2: sdhci: Cmd: 0x00000502 | Max curr: 0x00101010 | |
mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 | |
mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
mmc2: sdhci: Host ctl2: 0x00000000 | |
mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 | |
mmc2: sdhci: ============================================ | |
EXT4-fs (mmcblk0p7): recovery complete | |
EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Quota mode: disabled. | |
systemd[1]: System time before build time, advancing clock. | |
NET: Registered PF_INET6 protocol family | |
Segment Routing with IPv6 | |
RPL Segment Routing with IPv6 | |
In-situ OAM (IOAM) with IPv6 | |
systemd[1]: systemd 256~rc3-7 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE) | |
systemd[1]: Detected architecture riscv64. | |
systemd[1]: Hostname set to <rockos-eswin>. | |
systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported. | |
systemd[1]: Queued start job for default target graphical.target. | |
systemd[1]: Created slice system-getty.slice - Slice /system/getty. | |
systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. | |
systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. | |
systemd[1]: Created slice user.slice - User and Session Slice. | |
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. | |
systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). | |
systemd[1]: Expecting device dev-hvc0.device - /dev/hvc0... | |
[ OK ] Started systemd-timesyncd.service - Network Time Synchronization. | |
[ OK ] Reached target sysinit.target - System Initialization. | |
[ OK ] Started cups.path - CUPS Scheduler. | |
[ OK ] Started systemd-tmpfiles-clean.tim…y Cleanup of Temporary Directories. | |
[ OK ] Reached target paths.target - Path Units. | |
[ OK ] Reached target time-set.target - System Time Set. | |
[ OK ] Started anacron.timer - Trigger anacron every hour. | |
[ OK ] Started apt-daily.timer - Daily apt download activities. | |
[ OK ] Started apt-daily-upgrade.timer - …y apt upgrade and clean activities. | |
[ OK ] Started dpkg-db-backup.timer - Daily dpkg database backup timer. | |
[ OK ] Started e2scrub_all.timer - Period…Metadata Check for All Filesystems. | |
[ OK ] Started fstrim.timer - Discard unused filesystem blocks once a week. | |
[ OK ] Started logrotate.timer - Daily rotation of log files. | |
[ OK ] Started man-db.timer - Daily man-db regeneration. | |
[ OK ] Reached target timers.target - Timer Units. | |
[ OK ] Listening on avahi-daemon.socket -…DNS/DNS-SD Stack Activation Socket. | |
[ OK ] Listening on cups.socket - CUPS Scheduler. | |
[ OK ] Listening on dbus.socket - D-Bus System Message Bus Socket. | |
[ OK ] Listening on sshd-unix-local.socke…temd-ssh-generator, AF_UNIX Local). | |
[ OK ] Listening on systemd-hostnamed.socket - Hostname Service Socket. | |
[ OK ] Reached target sockets.target - Socket Units. | |
[ OK ] Reached target basic.target - Basic System. | |
Starting alsa-restore.service - Save/Restore Sound Card State... | |
[ OK ] Started 12.640385] win2030-eth-dwmac 50400000.ethernet end0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) | |
;1;39manacron.se[ 12.650598] win2030-eth-dwmac 50400000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0 | |
[ 12.661408] dwmac4: Master AXI performs any burst length | |
Starti[ 12.667634] win2030-eth-dwmac 50400000.ethernet end0: No Safety Features support found | |
ng avah[ 12.676834] win2030-eth-dwmac 50400000.ethernet end0: No MAC Management Counters available | |
i-daemon.service[ 12.686485] win2030-eth-dwmac 50400000.ethernet end0: PTP not supported by HW | |
- Avahi mDN[ 12.695302] win2030-eth-dwmac 50400000.ethernet end0: configuring for phy/rgmii link mode | |
S/DNS-SD Stack... | |
Starting blueman-mechanism.service - Bluetooth management mechanism... | |
[ OK ] Started cron.service - Regular background program processi[ 12.721537] win2030-eth-dwmac 50410000.ethernet end1: PHY [stmmac-1:00] driver [Generic PHY] (irq=POLL) | |
ng daemon. | |
[ 12.732534] win2030-eth-dwmac 50410000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0 | |
Starting dbus.service - D-Bus System Message Bus... | |
Starting e2scrub_reap.service -[ 12.751124] dwmac4: Master AXI performs any burst length | |
Re…ne ext4 Me[ 12.757822] win2030-eth-dwmac 50410000.ethernet end1: No Safety Features support found | |
tadata Check Sna[ 12.767106] win2030-eth-dwmac 50410000.ethernet end1: No MAC Management Counters available | |
pshots... | |
[ 12.775139] random: crng init done | |
Starting win2030-eth-dwmac 50410000.ethernet end1: PTP not supported by HW | |
[0;1;39mlm-senso[ 12.781529] random: 2 urandom warning(s) missed due to ratelimiting | |
rs.service - Init…lize hardware monitoring[ 12.800390] win2030-eth-dwmac 50410000.ethernet end1: configuring for phy/rgmii link mode | |
sensors... | |
Starting systemd-logind.service - User Login Management... | |
Starting udisks2.service - Disk Manager... | |
[ OK ] Finished alsa-restore.service - Save/Restore Sound Card State. | |
[ OK ] Reached target sound.target - Sound Card. | |
[ OK ] Started dbus.service - D-Bus System Message Bus. | |
Starting NetworkManager.service - Network Manager... | |
[ OK ] Started avahi-daemon.service - Avahi mDNS/DNS-SD Stack. | |
[ OK ] Started systemd-logind.service - User Login Management. | |
[ OK ] Finished e2scrub_reap.service - Re…line ext4 Metadata Check Snapshots. | |
systemd[1]: Expecting device dev-mmcblk0p5.device - /dev/mmcblk0p5... | |
systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0... | |
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. | |
Starting systemd-hostnamed.service - Hostname Service... | |
[ OK ] Started systemd-hostnamed.service - Hostname Service. | |
Starting NetworkManager-dispatcher…anager Script Dispatcher Service... | |
[ OK ] Started NetworkManager-dispatcher.… Manager Script Dispatcher Service. | |
[ OK ] Finished systemd-random-seed.service - Load/Save OS Random Seed. | |
[ OK ] Started NetworkManager.service - Network Manager. | |
[ OK ] Reached target network.target - Network. | |
Starting NetworkManager-wait-onlin…ce - Network Manager Wait Online... | |
Starting cups.service - CUPS Scheduler... | |
Starting ssh.service - OpenBSD Secure Shell server... | |
Starting systemd-user-sessions.service - Permit User Sessions... | |
systemd[1]: Reached target remote-fs.target - Remote File Systems. | |
systemd[1]: Reached target slices.target - Slice Units. | |
systemd[1]: Reached target swap.target - Swaps. | |
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. | |
systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. | |
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. | |
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). | |
systemd[1]: Listening on systemd-journald.socket - Journal Sockets. | |
systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). | |
systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). | |
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. | |
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. | |
systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). | |
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... | |
systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... | |
systemd[1]: sys-kernel-debug.mount - Kernel Debug File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/debug). | |
systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). | |
systemd[1]: Mounting tmp.mount - Temporary Directory /tmp... | |
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... | |
systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... | |
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... | |
systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... | |
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... | |
systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... | |
systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... | |
systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). | |
systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). | |
Starting polkit.service - Authorization Manager... | |
[ OK ] Finished systemd-user-sessions.service - Permit User Sessions. | |
Starting lightdm.service - Light Display Manager... | |
Starting plymouth-quit-wait.servic…d until boot process finishes up... | |
[ OK ] Started ssh.service - OpenBSD Secure Shell server. | |
[ OK ] Started cups.service - CUPS Scheduler. | |
[ OK ] Started polkit.service - Authorization Manager. | |
[ OK ] Started blueman-mechanism.service - Bluetooth management mechanism. | |
[ OK ] Started udisks2.service - Disk Manager. | |
systemd[1]: Starting systemd-journald.service - Journal Service... | |
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... | |
systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). | |
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... | |
systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). | |
systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... | |
systemd-journald[242]: Collecting audit messages is disabled. | |
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... | |
EXT4-fs (mmcblk0p7): re-mounted. Quota mode: disabled. | |
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. | |
systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock. | |
systemd[1]: Mounted tmp.mount - Temporary Directory /tmp. | |
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. | |
systemd[1]: modprobe@configfs.service: Deactivated successfully. | |
systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. | |
systemd[1]: modprobe@dm_mod.service: Deactivated successfully. | |
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. | |
systemd[1]: modprobe@drm.service: Deactivated successfully. | |
systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. | |
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. | |
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. | |
systemd[1]: modprobe@fuse.service: Deactivated successfully. | |
systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. | |
systemd[1]: modprobe@loop.service: Deactivated successfully. | |
systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. | |
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. | |
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. | |
systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. | |
systemd[1]: Started systemd-journald.service - Journal Service. | |
systemd-journald[242]: Received client request to flush runtime journal. | |
systemd-journald[242]: File /var/log/journal/ccf8b27c7a534c37a53d0a1c28320217/system.journal corrupted or uncleanly shut down, renaming and replacing. | |
systemd-journald[242]: Failed to open system journal: No space left on device | |
es_buddy_driver: loading out-of-tree module taints kernel. | |
random: alsactl: uninitialized urandom read (4 bytes read) | |
random: alsactl: uninitialized urandom read (4 bytes read) | |
random: alsactl: uninitialized urandom read (4 bytes read) | |
EXT4-fs (mmcblk0p5): recovery complete | |
EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: disabled. | |
__add_eswin_rsvmem_heap for mmz_nid_0_part_0 successfully! | |
__add_eswin_rsvmem_heap for mmz_nid_0_part_1 successfully! | |
__add_eswin_rsvmem_heap for secure_memory_nid_0_part_0 successfully! | |
__add_eswin_rsvmem_heap for secure_memory_nid_0_part_1 successfully! | |
riscv-dev-foo-a soc:E21@0: Adding to iommu group 10 | |
es_dewarp_driver: Unknown symbol debugfs_remove (err -2) | |
ris[ 13.657684] eswin_fan_control_get_fan_rpm.204 clk_rate:200000000,ppr:2,src_rpm:0,rpm:0 | |
cv-dev-foo-a soc:E21@0: ---------scpu_device_probe:587 | |
es_dewarp_driver: Unknown symbol debugfs_create_file (err -2) | |
DeviceConfigCreate:376, eswin print : read back aclk 800000000HZ | |
eswin print DeviceConfigCreate: gpu clk enable ok | |
eswin print DeviceConfigCreate: gpu clk disable ok | |
eswin print : set aclk to 800000000HZ | |
eswin print : read back aclk 800000000HZ | |
eswin print DeviceConfigCreate: gpu clk enable ok | |
eswin print DeviceConfigCreate: gpu clk reset ok | |
DeviceConfigCreate: --------------->dev_name=51400000.gpu | |
DeviceConfigCreate: --------------->reg_base=51400000, reg_size=fffff | |
DeviceConfigCreate: --------------->ui32IRQ=67 | |
PVR_K: 303: Read BVNC 30.3.408.101 from HW device registers | |
PVR_K: 303: RGX Device registered with BVNC 30.3.408.101 | |
[drm] Initialized pvr 1.18.6307965 20170530 for 51400000.gpu on minor 1 | |
random: avahi-daemon: uninitialized urandom read (4 bytes read) | |
random: alsactl: uninitialized urandom read (4 bytes read) | |
random: dbus-daemon: uninitialized urandom read (12 bytes read) | |
win2030-eth-dwmac 50400000.ethernet end0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) | |
win2030-eth-dwmac 50400000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0 | |
dwmac4: Master AXI performs any burst length | |
win2030-eth-dwmac 50400000.ethernet end0: No Safety Features support found | |
win2030-eth-dwmac 50400000.ethernet end0: No MAC Management Counters available | |
win2030-eth-dwmac 50400000.ethernet end0: PTP not supported by HW | |
win2030-eth-dwmac 50400000.ethernet end0: configuring for phy/rgmii link mode | |
win2030-eth-dwmac 50410000.ethernet end1: PHY [stmmac-1:00] driver [Generic PHY] (irq=POLL) | |
win2030-eth-dwmac 50410000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0 | |
dwmac4: Master AXI performs any burst length | |
win2030-eth-dwmac 50410000.ethernet end1: No Safety Features support found | |
win2030-eth-dwmac 50410000.ethernet end1: No MAC Management Counters available | |
random: crng init done | |
win2030-eth-dwmac 50410000.ethernet end1: PTP not supported by HW | |
random: 2 urandom warning(s) missed due to ratelimiting | |
win2030-eth-dwmac 50410000.ethernet end1: configuring for phy/rgmii link mode | |
[ 14.519083] PVR_K: 475: AXI fabric coherency (RGX_CR_SOC_AXI): 0xc | |
[ 14.526954] PVR_K: 475: RGX Firmware image 'rgx.fw.30.3.408.101' loaded | |
[ 14.541562] PVR_K: 475: Shader binary image 'rgx.sh.30.3.408.101' loaded | |
[ 14.771972] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 14.884461] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 15.205942] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_color_depth_capacity property | |
[ 15.215624] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set is_hdmi_capacity property | |
[ 15.224468] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_quant_range_sel_capacity property | |
[ 15.234435] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_max_tmds_clock_capacity property | |
[ 15.688118] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 17.249767] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 17.362051] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 17.665510] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_color_depth_capacity property | |
[ 17.682216] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set is_hdmi_capacity property | |
[ 17.698849] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_quant_range_sel_capacity property | |
[ 17.715513] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_max_tmds_clock_capacity property | |
[ 19.004178] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 19.116694] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 19.432177] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_color_depth_capacity property | |
[ 19.448881] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set is_hdmi_capacity property | |
[ 19.465516] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_quant_range_sel_capacity property | |
[ 19.482174] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_max_tmds_clock_capacity property | |
Debian GNU/Linux trixie/sid rocko | |
Debian GNU/Lisnux trixie/sid r-eswin hvc0 | |
rockos-eswin login: ockos-eswin ttyS0 | |
rockos-eswin login: [ 20.745316] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 20.857833] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 21.165510] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_color_depth_capacity property | |
[ 21.182217] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set is_hdmi_capacity property | |
[ 21.198848] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_quant_range_sel_capacity property | |
[ 21.215507] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_max_tmds_clock_capacity property | |
[ 22.246942] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 22.359043] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 22.665508] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_color_depth_capacity property | |
[ 22.682217] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set is_hdmi_capacity property | |
[ 22.698846] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_quant_range_sel_capacity property | |
[ 22.715532] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_max_tmds_clock_capacity property | |
[ 23.745904] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 23.858472] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 24.165511] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_color_depth_capacity property | |
[ 24.182217] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set is_hdmi_capacity property | |
[ 24.198849] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_quant_range_sel_capacity property | |
[ 24.215508] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_max_tmds_clock_capacity property | |
[ 25.494722] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 25.607234] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 25.915517] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_color_depth_capacity property | |
[ 25.932222] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set is_hdmi_capacity property | |
[ 25.948848] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_quant_range_sel_capacity property | |
[ 25.965507] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_max_tmds_clock_capacity property | |
[ 27.243803] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 27.356344] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 27.665510] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_color_depth_capacity property | |
[ 27.682214] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set is_hdmi_capacity property | |
[ 27.698848] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_quant_range_sel_capacity property | |
[ 27.715509] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_max_tmds_clock_capacity property | |
[ 28.994477] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 29.107548] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 29.415510] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_color_depth_capacity property | |
[ 29.432223] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set is_hdmi_capacity property | |
[ 29.448852] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_quant_range_sel_capacity property | |
[ 29.465512] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_max_tmds_clock_capacity property | |
[ 30.744079] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 30.856607] dw-hdmi-eswin 502a0000.hdmi: got edid: width[53] x height[30] | |
[ 31.165510] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_color_depth_capacity property | |
[ 31.182218] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set is_hdmi_capacity property | |
[ 31.198848] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_quant_range_sel_capacity property | |
[ 31.215511] [drm:dw_hdmi_eswin_set_property] *ERROR* don't support set hdmi_max_tmds_clock_capacity property | |
rockos-eswin login: debian | |
Password: | |
Linux rockos-eswin 5.17.0-rc7-win2030 #2024.06.13.15.10+e1cb4a0e2 SMP Thu Jun 13 15:11:14 UTC 2024 riscv64 | |
The programs included with the Debian GNU/Linux system are free software; | |
the exact distribution terms for each program are described in the | |
individual files in /usr/share/doc/*/copyright. | |
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | |
permitted by applicable law. | |
debian@rockos-eswin:~$ [ 50.455293] codec read reg[1]:0xc0 | |
[ 50.476096] codec read reg[1]:0xc0 | |
[ 50.518431] codec read reg[1]:0xc0 | |
[ 50.658859] codec read reg[1]:0xc0 | |
[ 50.678801] codec read reg[1]:0xc0 | |
[ 50.721476] codec read reg[1]:0xc0 | |
[ 50.863727] hdmi-audio-codec hdmi-audio-codec.1.auto: Only one simultaneous stream supported! | |
[ 50.872292] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -22 | |
[ 50.881899] i2s0-hdmi-i2s-hifi: __soc_pcm_open() failed (-22) | |
~ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment