Error log when plug in 2.4G keyboard adapter

log.log

pll config ok
now traning rate is 6400MT
ddr traning success_0
version:0.6;disable ECC
ddr self test OK

OpenSBI v1.0
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

Platform Name             : ESWIN EIC770X
Platform Features         : none
Platform HART Count       : 4
Platform IPI Device       : aclint-mswi
Platform Timer Device     : aclint-mtimer @ 1000000Hz
Platform Console Device   : uart8250
Platform HSM Device       : ---
Platform Reboot Device    : eswin_eic770x_reset
Platform Shutdown Device  : eswin_eic770x_reset
Firmware Base             : 0x80000000
Firmware Size             : 300 KB
Runtime SBI Version       : 0.3

Domain0 Name              : root
Domain0 Boot HART         : 0
Domain0 HARTs             : 0*,1*,2*,3*
Domain0 Region00          : 0x0000000002000000-0x000000000200ffff (I)
Domain0 Region01          : 0x0000000080000000-0x000000008007ffff ()
Domain0 Region02          : 0x0000001000000000-0x0000007fffffffff (M)
Domain0 Region03          : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address      : 0x0000000080200000
Domain0 Next Arg1         : 0x00000000f8000000
Domain0 Next Mode         : S-mode
Domain0 SysReset          : yes

Boot HART ID              : 0
Boot HART Domain          : root
Boot HART ISA             : rv64imafdcsuhx
Boot HART Features        : scounteren,mcounteren,mcountinhibit,sscofpmf
Boot HART PMP Count       : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 39
Boot HART MHPM Count      : 4
Boot HART MIDELEG         : 0x0000000000002666
Boot HART MEDELEG         : 0x0000000000f00509


U-Boot 2021.01-g5974e9d9 (Jul 08 2024 - 02:36:02 +0000)

CPU:   rv64imafdc_zba_zbb
Model: ESWIN EIC7700 EVB
DRAM:  16 GiB
Fn:eswin_sdhci_bind L:394
llMMC:   sdhci@50450000: 0, sd@50460000: 1
Loading Environment from MMC... trying mode MMC High Speed (52MHz) width 8 (at 52 MHz)
OK
In:    serial
Out:   serial
Err:   serial
eswin_dc_probe: enter.
[display_init]Eswin UBOOT DRM driver version: v1.0.1
eswin plat is:1
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
mode:1920x1080
[display_init]Detailed mode clock 148500 kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
[eswin_dc_init]regs=0x00000000502c0000, regsbak=0x00000000fd200410
[eswin_dc_init]:layer:0 hdisplay = 1920, htotal = 2200.hsync_st:2008.hsync_end:2052
[eswin_dc_init]: vdisplay = 1080, vtotal = 1125.vsync_st:1084.vsync_end:1089
[eswin_dc_init]: need scaler.
[eswin_dc_init]: src_width = 1280, src_height = 720.
CEA mode used vic=16
final pixclk = 148500000 tmdsclk = 148500000
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
PHY powered down in 1 iterations
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500
Error: Bad gzipped data
Error: error uncompressed logo_bmp !
failed to display uboot bmp logo
Net:   eth0: ethernet@50400000
Hit any key to stop autoboot:  0 
starting USB...
Bus usb1@50490000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb1@50490000 for devices... WARN halted endpoint, queueing URB anyway.
Unexpected XHCI event TRB, skipping... (fd205ac0 00000000 13000000 01008401)
Unhandled exception: Load access fault
EPC: 00000000fda3b9fa RA: 00000000fda3b9fa TVAL: 000000000000000c
EPC: 00000000802549fa RA: 00000000802549fa reloc adjusted

SP:  00000000fd1dc2a0 GP:  00000000fd1e4610 TP:  0000000000000000
T0:  0000000000000028 T1:  0000000000000010 T2:  00000000000000be
S0:  00000000fd2048c0 S1:  00000000fd1dd940 A0:  0000000000000000
A1:  0000000000000000 A2:  00000000fd2028f0 A3:  fffffffffd206008
A4:  0000000000000001 A5:  0000000000000020 A6:  000000000000000f
A7:  000000000000002d S2:  0000000000000000 S3:  0000000000000000
S4:  00000000fd206fc0 S5:  00000000fd206fc0 S6:  0000000080000280
S7:  00000000fd1dc600 S8:  0000000000000001 S9:  0000000000000000
S10: 0000000000000001 S11: 0000000000010c04 T3:  0000000000000303
T4:  0000000000000006 T5:  0000000000000080 T6:  00000000fd1e4610