Created
January 1, 2024 14:02
-
-
Save ShalokShalom/9d31e39b8bf59c01c6e13d5be717090d to your computer and use it in GitHub Desktop.
Port x86 to Pi
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
1. Connect to Ethernet | |
2. Insert USB key with configuration.nix | |
3. lsblk | |
4. sudo mount /dev/sda /run/mount | |
5. sudo cp /run/mount/configuration.nix /etc/nixos | |
6. sudo nixos-rebuild switch | |
Example configuration: | |
# Edit this configuration file to define what should be installed on | |
# your system. Help is available in the configuration.nix(5) man page | |
# and in the NixOS manual (accessible by running ‘nixos-help’). | |
{ config, pkgs, ... }: | |
{ | |
imports = | |
[ # Include the results of the hardware scan. | |
./hardware-configuration.nix | |
]; | |
# Bootloader. | |
boot.loader.systemd-boot.enable = true; | |
boot.loader.efi.canTouchEfiVariables = true; | |
networking.hostName = "cosmos"; # Define your hostname. | |
# networking.wireless.enable = true; # Enables wireless support via wpa_supplicant. | |
# Configure network proxy if necessary | |
# networking.proxy.default = "http://user:password@proxy:port/"; | |
# networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain"; | |
# Enable networking | |
networking.networkmanager.enable = true; | |
# Set your time zone. | |
time.timeZone = "Europe/Vienna"; | |
# Select internationalisation properties. | |
i18n.defaultLocale = "en_US.UTF-8"; | |
i18n.extraLocaleSettings = { | |
LC_ADDRESS = "de_AT.UTF-8"; | |
LC_IDENTIFICATION = "de_AT.UTF-8"; | |
LC_MEASUREMENT = "de_AT.UTF-8"; | |
LC_MONETARY = "de_AT.UTF-8"; | |
LC_NAME = "de_AT.UTF-8"; | |
LC_NUMERIC = "de_AT.UTF-8"; | |
LC_PAPER = "de_AT.UTF-8"; | |
LC_TELEPHONE = "de_AT.UTF-8"; | |
LC_TIME = "de_AT.UTF-8"; | |
}; | |
programs.fish.enable = true; | |
users.defaultUserShell = pkgs.fish; | |
# Enable the X11 windowing system. | |
services.xserver.enable = true; | |
# Enable the KDE Plasma Desktop Environment. | |
services.xserver.displayManager.sddm.enable = true; | |
services.xserver.desktopManager.plasma5.enable = true; | |
# Enable Partitionmanager | |
programs.partition-manager.enable = true; | |
# Configure keymap in X11 | |
services.xserver = { | |
layout = "at"; | |
xkbVariant = "nodeadkeys"; | |
}; | |
services.avahi = { | |
enable = true; | |
nssmdns = true; | |
openFirewall = true; | |
}; | |
# Enable CUPS to print documents. | |
services.printing.enable = true; | |
services.printing.drivers = [ pkgs.brlaser ]; | |
# Enable sound with pipewire. | |
sound.enable = true; | |
hardware.pulseaudio.enable = false; | |
security.rtkit.enable = true; | |
services.pipewire = { | |
enable = true; | |
alsa.enable = true; | |
alsa.support32Bit = true; | |
pulse.enable = true; | |
# If you want to use JACK applications, uncomment this | |
#jack.enable = true; | |
# use the example session manager (no others are packaged yet so this is enabled by default, | |
# no need to redefine it in your config for now) | |
#media-session.enable = true; | |
}; | |
# Define a user account. Don't forget to set a password with ‘passwd’. | |
users.users.cosmos = { | |
isNormalUser = true; | |
description = "cosmos"; | |
extraGroups = [ "networkmanager" "wheel" ]; | |
packages = with pkgs; [ | |
ungoogled-chromium | |
libsForQt5.koko | |
kate | |
git | |
kcalc | |
dnsmasq | |
wget | |
qbittorrent | |
haruna | |
joycond | |
]; | |
}; | |
environment.systemPackages = with pkgs; [ | |
bluedevil | |
yakuake | |
inxi | |
kfind | |
# etcher | |
hostsblock | |
lm_sensors | |
mpv | |
micro | |
alsa-tools | |
pciutils | |
usbutils | |
hw-probe | |
starship | |
hackgen-nf-font | |
bottom | |
hblock | |
bat | |
ripgrep-all | |
ugrep | |
eza | |
partition-manager | |
ddrescue | |
]; | |
environment.plasma5.excludePackages = with pkgs.libsForQt5; [ | |
oxygen | |
gwenview | |
]; | |
boot.kernelPackages = pkgs.linuxPackages_latest; | |
# Enable automatic login for the user. | |
services.xserver.displayManager.autoLogin.enable = true; | |
services.xserver.displayManager.autoLogin.user = "cosmos"; | |
# Enable Flakes | |
nix.settings.experimental-features = [ "nix-command" "flakes" ]; | |
# Allow unfree packages | |
nixpkgs.config.allowUnfree = true; | |
hardware.bluetooth.enable = true; # enables support for Bluetooth | |
hardware.bluetooth.powerOnBoot = true; # powers up the default Bluetooth controller on boot | |
# Some programs need SUID wrappers, can be configured further or are | |
# started in user sessions. | |
# programs.mtr.enable = true; | |
# programs.gnupg.agent = { | |
# enable = true; | |
# enableSSHSupport = true; | |
# }; | |
# List services that you want to enable: | |
# Enable the OpenSSH daemon. | |
# services.openssh.enable = true; | |
# Open ports in the firewall. | |
# networking.firewall.allowedTCPPorts = [ ... ]; | |
# networking.firewall.allowedUDPPorts = [ ... ]; | |
# Or disable the firewall altogether. | |
# networking.firewall.enable = false; | |
# This value determines the NixOS release from which the default | |
# settings for stateful data, like file locations and database versions | |
# on your system were taken. It‘s perfectly fine and recommended to leave | |
# this value at the release version of the first install of this system. | |
# Before changing this value read the documentation for this option | |
# (e.g. man configuration.nix or on https://nixos.org/nixos/options.html). | |
system.stateVersion = "23.05"; # Did you read the comment? | |
} |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment