Created
June 1, 2024 11:46
-
-
Save Siddharth-Vadapalli-at-TI/bb20e30a4a9e29e1a6772915c13dd214 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 6.10.0-rc1-next-20240531-00007-ge81c1a200822 (uda0492258@uda0492258) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture | |
| 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #809 SMP PREEMPT Sat Jun 1 17:12 | |
| :19 IST 2024 | |
| [ 0.000000] KASLR disabled due to lack of seed | |
| [ 0.000000] Machine model: Texas Instruments J722S EVM | |
| [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') | |
| [ 0.000000] printk: legacy bootconsole [ns16550a0] enabled | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] OF: reserved mem: 0x000000009e780000..0x000000009e7fffff (512 KiB) nomap non-reusable tfa@9e780000 | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e77ffff] | |
| [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] | |
| [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000a00fffff] | |
| [ 0.000000] node 0: [mem 0x00000000a0100000-0x00000000a0ffffff] | |
| [ 0.000000] node 0: [mem 0x00000000a1000000-0x00000000ffffffff] | |
| [ 0.000000] node 0: [mem 0x0000000880000000-0x00000009ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff] | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.4 | |
| [ 0.000000] percpu: Embedded 22 pages/cpu s51240 r8192 d30680 u90112 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: ARM erratum 845719 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u | |
| -boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=4db1d703-02 rw rootfstype=ext4 rootwait | |
| [ 0.000000] Unknown kernel command line parameters "mtdparts=spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nan | |
| d.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern)", will be passed to user space. | |
| [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2097152 | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off, mlocked free:off | |
| [ 0.000000] software IO TLB: area num 4. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) | |
| [ 0.000000] Memory: 8064844K/8388608K available (13056K kernel code, 1298K rwdata, 4952K rodata, 2944K init, 510K bss, 290996K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 256 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000880050000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880060000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.008585] Console: colour dummy device 80x25 | |
| [ 0.013169] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.023836] pid_max: default: 32768 minimum: 301 | |
| [ 0.028634] LSM: initializing lsm=capability | |
| [ 0.033095] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.040849] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.051024] rcu: Hierarchical SRCU implementation. | |
| [ 0.055959] rcu: Max phase no-delay instances is 1000. | |
| [ 0.061649] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.067864] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.077176] EFI services will not be available. | |
| [ 0.082030] smp: Bringing up secondary CPUs ... | |
| [ 0.087238] Detected VIPT I-cache on CPU1 | |
| [ 0.087320] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 | |
| [ 0.087337] GICv3: CPU1: using allocated LPI pending table @0x0000000880070000 | |
| [ 0.087386] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.088063] Detected VIPT I-cache on CPU2 | |
| [ 0.088126] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 | |
| [ 0.088141] GICv3: CPU2: using allocated LPI pending table @0x0000000880080000 | |
| [ 0.088176] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
| [ 0.088766] Detected VIPT I-cache on CPU3 | |
| [ 0.088825] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 | |
| [ 0.088839] GICv3: CPU3: using allocated LPI pending table @0x0000000880090000 | |
| [ 0.088871] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
| [ 0.088946] smp: Brought up 1 node, 4 CPUs | |
| [ 0.168544] SMP: Total of 4 processors activated. | |
| [ 0.173350] CPU: All CPU(s) started at EL2 | |
| [ 0.177545] CPU features: detected: 32-bit EL0 Support | |
| [ 0.182798] CPU features: detected: CRC32 instructions | |
| [ 0.188091] alternatives: applying system-wide alternatives | |
| [ 0.195475] devtmpfs: initialized | |
| [ 0.207336] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.217333] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.225129] 27024 pages in range for non-PLT usage | |
| [ 0.225153] 518544 pages in range for PLT usage | |
| [ 0.230414] pinctrl core: initialized pinctrl subsystem | |
| [ 0.240802] DMI not present or invalid. | |
| [ 0.246813] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.253659] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.261141] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.269428] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.277662] audit: initializing netlink subsys (disabled) | |
| [ 0.283362] audit: type=2000 audit(0.212:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.283816] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.291286] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.297456] cpuidle: using governor menu | |
| [ 0.308297] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.315298] ASID allocator initialised with 65536 entries | |
| [ 0.333577] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.340542] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.346946] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.353879] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.360277] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.367206] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.373605] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.380534] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.388700] k3-chipinfo 43000014.chipid: Family:J722S rev:SR1.0 JTAGID[0x0bba002f] Detected | |
| [ 0.398022] iommu: Default domain type: Translated | |
| [ 0.402936] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.409592] SCSI subsystem initialized | |
| [ 0.413779] usbcore: registered new interface driver usbfs | |
| [ 0.419414] usbcore: registered new interface driver hub | |
| [ 0.424861] usbcore: registered new device driver usb | |
| [ 0.430533] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.435602] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.444941] PTP clock support registered | |
| [ 0.448976] EDAC MC: Ver: 3.0.0 | |
| [ 0.452469] scmi_core: SCMI protocol bus registered | |
| [ 0.457828] FPGA manager framework | |
| [ 0.461383] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.468562] vgaarb: loaded | |
| [ 0.471684] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.478167] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.482194] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.495483] NET: Registered PF_INET protocol family | |
| [ 0.500792] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.513681] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) | |
| [ 0.522526] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.530465] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.538952] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
| [ 0.548324] TCP: Hash tables configured (established 65536 bind 65536) | |
| [ 0.555200] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| [ 0.562307] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| [ 0.569975] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.576233] RPC: Registered named UNIX socket transport module. | |
| [ 0.582308] RPC: Registered udp transport module. | |
| [ 0.587110] RPC: Registered tcp transport module. | |
| [ 0.591913] RPC: Registered tcp-with-tls transport module. | |
| [ 0.597514] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.604111] PCI: CLS 0 bytes, default 64 | |
| [ 0.609402] Initialise system trusted keyrings | |
| [ 0.614159] workingset: timestamp_bits=46 max_order=21 bucket_order=0 | |
| [ 0.621175] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.627405] NFS: Registering the id_resolver key type | |
| [ 0.632597] Key type id_resolver registered | |
| [ 0.636872] Key type id_legacy registered | |
| [ 0.640978] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.647823] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.655586] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.712074] Key type asymmetric registered | |
| [ 0.716262] Asymmetric key parser 'x509' registered | |
| [ 0.721294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
| [ 0.728859] io scheduler mq-deadline registered | |
| [ 0.733486] io scheduler kyber registered | |
| [ 0.737610] io scheduler bfq registered | |
| [ 0.744179] pinctrl-single 4084000.pinctrl: 34 pins, size 136 | |
| [ 0.750537] pinctrl-single f4000.pinctrl: 171 pins, size 684 | |
| [ 0.763905] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.772628] STM32 USART driver initialized | |
| [ 0.782659] loop: module loaded | |
| [ 0.786659] megasas: 07.727.03.00-rc1 | |
| [ 0.794004] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.799896] thunder_xcv, ver 1.0 | |
| [ 0.803216] thunder_bgx, ver 1.0 | |
| [ 0.806536] nicpf, ver 1.0 | |
| [ 0.809652] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version | |
| [ 0.817028] hns3: Copyright (c) 2017 Huawei Corporation. | |
| [ 0.822495] hclge is initializing | |
| [ 0.825916] e1000: Intel(R) PRO/1000 Network Driver | |
| [ 0.830896] e1000: Copyright (c) 1999-2006 Intel Corporation. | |
| [ 0.836788] e1000e: Intel(R) PRO/1000 Network Driver | |
| [ 0.841859] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 0.847925] igb: Intel(R) Gigabit Ethernet Network Driver | |
| [ 0.853439] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 0.859148] igbvf: Intel(R) Gigabit Virtual Function Network Driver | |
| [ 0.865548] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 0.871717] sky2: driver version 1.30 | |
| [ 0.876262] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.882592] usbcore: registered new interface driver usb-storage | |
| [ 0.889431] i2c_dev: i2c /dev entries driver | |
| [ 0.895412] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.901755] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.906800] Synopsys Designware Multimedia Card Interface Driver | |
| [ 0.913345] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.920082] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.926467] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 0.933685] usbcore: registered new interface driver usbhid | |
| [ 0.939384] usbhid: USB HID core driver | |
| [ 0.943757] omap-mailbox 29000000.mailbox: no available mbox devices found | |
| [ 0.950829] omap-mailbox 29010000.mailbox: no available mbox devices found | |
| [ 0.957892] omap-mailbox 29020000.mailbox: no available mbox devices found | |
| [ 0.964946] omap-mailbox 29030000.mailbox: no available mbox devices found | |
| [ 0.973447] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
| [ 0.982320] optee: probing for conduit method. | |
| [ 0.986887] optee: revision 4.1 (012cdca4) | |
| [ 0.987179] optee: dynamic shared memory is enabled | |
| [ 0.996573] optee: initialized driver | |
| [ 1.002122] NET: Registered PF_PACKET protocol family | |
| [ 1.007425] 9pnet: Installing 9P2000 support | |
| [ 1.011866] Key type dns_resolver registered | |
| [ 1.024445] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level | |
| [ 1.032891] registered taskstats version 1 | |
| [ 1.037260] Loading compiled-in X.509 certificates | |
| [ 1.053959] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.0.6--w2023.01-j722s (Kool Koa') | |
| [ 1.110456] omap_i2c 2b200000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 1.117322] pca953x 1-0023: supply vcc not found, using dummy regulator | |
| [ 1.124234] pca953x 1-0023: using AI | |
| [ 1.152874] omap_i2c 20000000.i2c: bus 1 rev0.12 at 400 kHz | |
| [ 1.158834] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created | |
| [ 1.167160] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created | |
| [ 1.176384] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created | |
| [ 1.185378] ti-sci-inta 4e400000.interrupt-controller: Interrupt Aggregator domain 200 created | |
| [ 1.194566] ti-udma 485c0100.dma-controller: Number of rings: 78 | |
| [ 1.202941] ti-udma 485c0100.dma-controller: Channels: 44 (bchan: 16, tchan: 12, rchan: 16) | |
| [ 1.213794] ti-udma 485c0000.dma-controller: Number of rings: 150 | |
| [ 1.224567] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15) | |
| [ 1.234083] ti-udma 4e230000.dma-controller: error -EINVAL: invalid resource (null) | |
| [ 1.242025] ti-udma 4e230000.dma-controller: probe with driver ti-udma failed with error -22 | |
| [ 1.252038] printk: legacy console [ttyS2] disabled | |
| [ 1.257424] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 230, base_baud = 3000000) is a 8250 | |
| [ 1.266301] printk: legacy console [ttyS2] enabled | |
| [ 1.266301] printk: legacy console [ttyS2] enabled | |
| [ 1.276005] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.276005] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.295223] 7 fixed-partitions partitions found on MTD device fc40000.spi.0 | |
| [ 1.302217] Creating 7 MTD partitions on "fc40000.spi.0": | |
| [ 1.307611] 0x000000000000-0x000000080000 : "ospi.tiboot3" | |
| [ 1.314323] 0x000000080000-0x000000280000 : "ospi.tispl" | |
| [ 1.320734] 0x000000280000-0x000000680000 : "ospi.u-boot" | |
| [ 1.327176] 0x000000680000-0x0000006c0000 : "ospi.env" | |
| [ 1.333391] 0x0000006c0000-0x000000700000 : "ospi.env.backup" | |
| [ 1.340248] 0x000000800000-0x000003fc0000 : "ospi.rootfs" | |
| [ 1.346684] 0x000003fc0000-0x000004000000 : "ospi.phypattern" | |
| [ 1.391679] davinci_mdio 8000f00.mdio: davinci mdio revision 17.7, bus freq 1000000 | |
| [ 1.402879] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867 | |
| [ 1.411013] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01903, cpsw version 0x6BA81903 Ports: 3 quirks:00000002 | |
| [ 1.423856] am65-cpsw-nuss 8000000.ethernet: Use random MAC address | |
| [ 1.430127] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 | |
| [ 1.437252] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 | |
| [ 1.447968] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 | |
| [ 1.459726] mmc0: CQHCI version 5.10 | |
| [ 1.472547] clk: Disabling unused clocks | |
| [ 1.481804] PM: genpd: Disabling unused power domains | |
| [ 1.487038] ALSA device list: | |
| [ 1.487195] mmc1: CQHCI version 5.10 | |
| [ 1.490112] No soundcards found. | |
| [ 1.502580] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit | |
| [ 1.534949] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit | |
| [ 1.542611] Waiting for root device PARTUUID=4db1d703-02... | |
| [ 1.597818] mmc0: Command Queue Engine enabled | |
| [ 1.602281] mmc0: new HS400 MMC card at address 0001 | |
| [ 1.607878] mmcblk0: mmc0:0001 G1M15L 29.6 GiB | |
| [ 1.607925] mmc1: new ultra high speed SDR104 SDHC card at address aaaa | |
| [ 1.613729] mmcblk0boot0: mmc0:0001 G1M15L 31.5 MiB | |
| [ 1.619504] mmcblk1: mmc1:aaaa SC16G 14.8 GiB | |
| [ 1.624870] mmcblk0boot1: mmc0:0001 G1M15L 31.5 MiB | |
| [ 1.632769] mmcblk1: p1 p2 | |
| [ 1.633980] mmcblk0rpmb: mmc0:0001 G1M15L 4.00 MiB, chardev (240:0) | |
| [ 1.654061] EXT4-fs (mmcblk1p2): mounted filesystem a4156065-8c29-473f-94fa-2cc6e8906631 r/w with ordered data mode. Quota mode: none. | |
| [ 1.666235] VFS: Mounted root (ext4 filesystem) on device 179:66. | |
| [ 1.674921] devtmpfs: mounted | |
| [ 1.678770] Freeing unused kernel memory: 2944K | |
| [ 1.683393] Run /sbin/init as init process | |
| [ 1.834078] systemd[1]: System time before build time, advancing clock. | |
| [ 1.937335] NET: Registered PF_INET6 protocol family | |
| [ 1.943347] Segment Routing with IPv6 | |
| [ 1.947084] In-situ OAM (IOAM) with IPv6 | |
| [ 1.977541] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS - | |
| FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hier | |
| archy=hybrid) | |
| [ 2.009218] systemd[1]: Detected architecture arm64. | |
| Welcome to Arago 2023.10! | |
| [ 2.102497] systemd[1]: Hostname set to <j722s-evm>. | |
| [ 2.214109] systemd-sysv-generator[101]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatib | |
| ility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 2.446503] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file | |
| , and consider removing the setting altogether. | |
| [ 2.512161] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit f | |
| ile, and consider removing the setting altogether. | |
| [ 2.596414] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 2.681923] systemd[1]: Created slice Slice /system/getty. | |
| [ OK ] Created slice Slice /system/getty. | |
| [ 2.706494] systemd[1]: Created slice Slice /system/modprobe. | |
| [ OK ] Created slice Slice /system/modprobe. | |
| [ 2.730415] systemd[1]: Created slice Slice /system/serial-getty. | |
| [ OK ] Created slice Slice /system/serial-getty. | |
| [ 2.753817] systemd[1]: Created slice User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| [ 2.776129] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [ OK ] Started Dispatch Password …ts to Console Directory Watch. | |
| [ 2.800010] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ OK ] Started Forward Password R…uests to Wall Directory Watch. | |
| [ 2.824182] systemd[1]: Reached target Path Units. | |
| [ OK ] Reached target Path Units. | |
| [ 2.839850] systemd[1]: Reached target Remote File Systems. | |
| [ OK ] Reached target Remote File Systems. | |
| [ 2.859802] systemd[1]: Reached target Slice Units. | |
| [ OK ] Reached target Slice Units. | |
| [ 2.875832] systemd[1]: Reached target Swaps. | |
| [ OK ] Reached target Swaps. | |
| [ 2.953264] systemd[1]: Listening on RPCbind Server Activation Socket. | |
| [ OK ] Listening on RPCbind Server Activation Socket. | |
| [ 2.975919] systemd[1]: Reached target RPC Port Mapper. | |
| [ OK ] Reached target RPC Port Mapper. | |
| [ 3.004066] systemd[1]: Listening on Process Core Dump Socket. | |
| [ OK ] Listening on Process Core Dump Socket. | |
| [ 3.028185] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [ OK ] Listening on initctl Compatibility Named Pipe. | |
| [ 3.052577] systemd[1]: Listening on Journal Audit Socket. | |
| [ OK ] Listening on Journal Audit Socket. | |
| [ 3.076428] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| [ 3.100368] systemd[1]: Listening on Journal Socket. | |
| [ OK ] Listening on Journal Socket. | |
| [ 3.120632] systemd[1]: Listening on Network Service Netlink Socket. | |
| [ OK ] Listening on Network Service Netlink Socket. | |
| [ 3.144483] systemd[1]: Listening on udev Control Socket. | |
| [ OK ] Listening on udev Control Socket. | |
| [ 3.164221] systemd[1]: Listening on udev Kernel Socket. | |
| [ OK ] Listening on udev Kernel Socket. | |
| [ 3.184297] systemd[1]: Listening on User Database Manager Socket. | |
| [ OK ] Listening on User Database Manager Socket. | |
| [ 3.236131] systemd[1]: Mounting Huge Pages File System... | |
| Mounting Huge Pages File System... | |
| [ 3.260455] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting POSIX Message Queue File System... | |
| [ 3.288464] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting Kernel Debug File System... | |
| [ 3.304262] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
| [ 3.324476] systemd[1]: Mounting Temporary Directory /tmp... | |
| Mounting Temporary Directory /tmp... | |
| [ 3.345609] systemd[1]: Starting Create List of Static Device Nodes... | |
| Starting Create List of Static Device Nodes... | |
| [ 3.372528] systemd[1]: Starting Load Kernel Module configfs... | |
| Starting Load Kernel Module configfs... | |
| [ 3.400481] systemd[1]: Starting Load Kernel Module drm... | |
| Starting Load Kernel Module drm... | |
| [ 3.424832] systemd[1]: Starting Load Kernel Module fuse... | |
| Starting Load Kernel Module fuse... | |
| [ 3.488410] fuse: init (API version 7.40) | |
| [ 3.508450] systemd[1]: Starting Start psplash boot splash screen... | |
| Starting Start psplash boot splash screen... | |
| [ 3.539568] systemd[1]: Starting RPC Bind... | |
| Starting RPC Bind... | |
| [ 3.556080] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). | |
| [ 3.575475] systemd[1]: Starting Journal Service... | |
| Starting Journal Service... | |
| [ 3.601540] systemd[1]: Starting Load Kernel Modules... | |
| Starting Load Kernel Modules... | |
| [ 3.621444] systemd[1]: Starting Generate network units from Kernel command line... | |
| Starting Generate network …ts from Kernel command line... | |
| [ 3.649255] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| Starting Remount Root and Kernel File Systems... | |
| [ 3.679230] systemd[1]: Starting Coldplug All udev Devices... | |
| Starting Coldplug All udev Devices... | |
| [ 3.705439] systemd[1]: Started RPC Bind. | |
| [ OK ] Started RPC Bind. | |
| [ 3.712448] EXT4-fs (mmcblk1p2): re-mounted a4156065-8c29-473f-94fa-2cc6e8906631 r/w. Quota mode: none. | |
| [ 3.727178] systemd[1]: Started Journal Service. | |
| [ OK ] Started Journal Service. | |
| [ OK ] Mounted Huge Pages File System. | |
| [ OK ] Mounted POSIX Message Queue File System. | |
| [ OK ] Mounted Kernel Debug File System. | |
| [ OK ] Mounted Temporary Directory /tmp. | |
| [ OK ] Finished Create List of Static Device Nodes. | |
| [ OK ] Finished Load Kernel Module configfs. | |
| [ OK ] Finished Load Kernel Module drm. | |
| [ OK ] Finished Load Kernel Module fuse. | |
| [FAILED] Failed to start Start psplash boot splash screen. | |
| See 'systemctl status psplash-start.service' for details. | |
| [DEPEND] Dependency failed for Star…progress communication helper. | |
| [ OK ] Finished Load Kernel Modules. | |
| [ OK ] Finished Generate network units from Kernel command line. | |
| [ OK ] Finished Remount Root and Kernel File Systems. | |
| Mounting FUSE Control File System... | |
| Mounting Kernel Configuration File System... | |
| Starting Flush Journal to Persistent Storage... | |
| [ 4.110772] systemd-journald[121]: Received client request to flush runtime journal. | |
| Starting Apply Kernel Variables... | |
| Starting Create Static Device Nodes in /dev... | |
| [ OK ] Mounted FUSE Control File System. | |
| [ OK ] Mounted Kernel Configuration File System. | |
| [ OK ] Finished Flush Journal to Persistent Storage. | |
| [ OK ] Finished Apply Kernel Variables. | |
| [ OK ] Finished Create Static Device Nodes in /dev. | |
| [ OK ] Reached target Preparation for Local File Systems. | |
| Mounting /media/ram... | |
| Mounting /var/volatile... | |
| [ 4.320381] audit: type=1334 audit(1651167747.484:2): prog-id=5 op=LOAD | |
| [ 4.327180] audit: type=1334 audit(1651167747.488:3): prog-id=6 op=LOAD | |
| Starting Rule-based Manage…for Device Events and Files... | |
| [ OK ] Finished Coldplug All udev Devices. | |
| [ OK ] Mounted /media/ram. | |
| [ OK ] Mounted /var/volatile. | |
| Starting Load/Save Random Seed... | |
| [ OK ] Started Rule-based Manager for Device Events and Files. | |
| [ OK ] Found device /dev/ttyS2. | |
| [ 5.063605] rtc-ti-k3 2b1f0000.rtc: registered as rtc0 | |
| [ 5.070064] rtc-ti-k3 2b1f0000.rtc: setting system clock to 1970-01-01T00:00:03 UTC (3) | |
| [ OK ] Reached target Hardware activated USB gadget. | |
| [ 5.335753] random: crng init done | |
| [ OK ] Finished Load/Save Random Seed. | |
| [ 5.816708] j721e-pcie f102000.pcie: host bridge /bus@f0000/pcie@f102000 ranges: | |
| [ 5.824257] j721e-pcie f102000.pcie: IO 0x0068001000..0x0068010fff -> 0x0068001000 | |
| [ 5.832551] j721e-pcie f102000.pcie: MEM 0x0068011000..0x006fffffff -> 0x0068011000 | |
| [ 5.841389] j721e-pcie f102000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000 | |
| [ 5.856080] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 5.861684] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 | |
| [ 5.869748] xhci-hcd xhci-hcd.1.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000008010 | |
| [ 5.879292] xhci-hcd xhci-hcd.1.auto: irq 418, io mem 0x31210000 | |
| [ 5.885647] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 5.891242] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 | |
| [ 5.899051] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed | |
| [ 5.906598] hub 1-0:1.0: USB hub found | |
| [ 5.910569] hub 1-0:1.0: 1 port detected | |
| [ 5.916678] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 5.925672] hub 2-0:1.0: USB hub found | |
| [ 5.929567] hub 2-0:1.0: 1 port detected | |
| [ 5.955702] j721e-pcie f102000.pcie: Link up | |
| [ 5.960681] j721e-pcie f102000.pcie: PCI host bridge to bus 0000:00 | |
| [ 5.967168] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 5.972881] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x68001000-0x68010fff]) | |
| [ 5.982497] pci_bus 0000:00: root bus resource [mem 0x68011000-0x6fffffff] | |
| [ 5.989502] pci 0000:00:00.0: [104c:b010] type 01 class 0x060400 PCIe Root Port | |
| [ 5.996917] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits | |
| [ 6.006689] pci 0000:00:00.0: PCI bridge to [bus 00] | |
| [ 6.011755] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] | |
| [ 6.017907] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] | |
| [ 6.024745] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] | |
| [ 6.032597] pci 0000:00:00.0: supports D1 | |
| [ 6.036673] pci 0000:00:00.0: PME# supported from D0 D1 D3hot | |
| [ 6.044441] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 6.052884] pci 0000:01:00.0: [8086:2700] type 00 class 0x010802 PCIe Endpoint | |
| [ 6.060311] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] | |
| [ 6.066972] pci 0000:01:00.0: ROM [mem 0x00000000-0x0000ffff pref] | |
| [ 6.073272] pci 0000:01:00.0: enabling Extended Tags | |
| [ 6.078589] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) | |
| [ 6.094059] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 6.100917] pci 0000:00:00.0: bridge window [mem 0x68100000-0x681fffff]: assigned | |
| [ 6.108586] pci 0000:01:00.0: ROM [mem 0x68100000-0x6810ffff pref]: assigned | |
| [ 6.115739] pci 0000:01:00.0: BAR 0 [mem 0x68110000-0x68113fff 64bit]: assigned | |
| [ 6.123196] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 6.128294] pci 0000:00:00.0: bridge window [mem 0x68100000-0x681fffff] | |
| [ 6.135460] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 | |
| [ 6.142251] pcieport 0000:00:00.0: enabling device (0000 -> 0002) | |
| [ 6.149042] pcieport 0000:00:00.0: PME: Signaling with IRQ 421 | |
| [ 6.155912] pcieport 0000:00:00.0: AER: enabled with IRQ 421 | |
| [ 6.175500] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 | |
| [ 6.175767] usb 1-1: new high-speed USB device number 2 using xhci-hcd | |
| [ 6.182576] nvme nvme0: pci function 0000:01:00.0 | |
| [ 6.193502] nvme 0000:01:00.0: enabling device (0000 -> 0002) | |
| [ 6.205504] nvme nvme0: 4/0/0 default/read/poll queues | |
| [ 6.213638] nvme0n1: p1 p2 p3 | |
| [ 6.339611] hub 1-1:1.0: USB hub found | |
| [ 6.345383] hub 1-1:1.0: 4 ports detected | |
| [ 6.467877] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd | |
| [ 6.497490] hub 2-1:1.0: USB hub found | |
| [ 6.501492] hub 2-1:1.0: 4 ports detected | |
| [ 6.639749] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd | |
| [ OK ] Found device /dev/disk/by-uuid/BD9D-4F5F. | |
| [ OK ] Created slice Slice /system/systemd-fsck. | |
| Mounting /boot... | |
| [ 7.015743] usb 1-1.1: new high-speed USB device number 4 using xhci-hcd | |
| Starting File System Check on /dev/nvme0n1p1... | |
| [ 7.029039] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| Starting File System Check on /dev/nvme0n1p2... | |
| Starting File System Check on /dev/nvme0n1p3... | |
| [ OK ] Mounted /boot. | |
| [ OK ] Finished File System Check on /dev/nvme0n1p1. | |
| [ OK ] Finished File System Check on /dev/nvme0n1p2. | |
| [ 7.126134] usb-storage 1-1.1:1.0: USB Mass Storage device detected | |
| [ 7.133430] scsi host0: usb-storage 1-1.1:1.0 | |
| Mounting /run/media/nvme0n1p1... | |
| Mounting /run/media/nvme0n1p2... | |
| [ OK ] Finished File System Check on /dev/[ 7.178777] EXT4-fs (nvme0n1p2): mounted filesystem 3f436a17-cd7f-4c06-a01d-4850590c56ed r/w with ordered data mode. Quota mo | |
| de: none. | |
| nvme0n1p3. | |
| [ 7.179870] EXT4-fs (nvme0n1p1): mounted filesystem 6325a7f7-a918-4e3a-9d2c-eb34c7738aa7 r/w with ordered data mode. Quota mode: none. | |
| [ OK ] Mounted /run/media/nvme0n1p1. | |
| [ 7.219731] usb 1-1.2: new high-speed USB device number 5 using xhci-hcd | |
| [ OK ] Mounted /run/media/nvme0n1p2. | |
| Mounting /run/media/nvme0n1p3... | |
| [ 7.300197] EXT4-fs (nvme0n1p3): mounted filesystem afb22649-e892-4c32-90f4-10e2afaefcec r/w with ordered data mode. Quota mode: none. | |
| [ OK ] Mounted /run/media/nvme0n1p3. | |
| [ OK ] Reached target Local File Systems 7.333957] usb-storage 1-1.2:1.0: USB Mass Storage device detected | |
| 0m. | |
| [ 7.340819] scsi host1: usb-storage 1-1.2:1.0 | |
| Starting Create Volatile Files and Directories... | |
| [ 7.427719] usb 1-1.4: new high-speed USB device number 6 using xhci-hcd | |
| [ OK ] Finished Create Volatile Files and Directories. | |
| Starting Network Time Synchronization... | |
| Starting Record System Boot/Shutdown in UTMP... | |
| [ OK ] Finished Record System Boot/Shutdown in UTMP. | |
| [ 7.537898] usb-storage 1-1.4:1.0: USB Mass Storage device detected | |
| [ 7.545436] scsi host2: usb-storage 1-1.4:1.0 | |
| [ OK ] Started Network Time Synchronization. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Reached target System Time Set. | |
| [ OK ] Started Daily rotation of log files. | |
| [ OK ] Reached target Timer Units. | |
| [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| Starting Docker Socket for the API... | |
| [ OK ] Listening on dropbear.socket. | |
| [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. | |
| Starting Weston socket... | |
| Starting D-Bus System Message Bus... | |
| Starting Reboot and dump vmcore via kexec... | |
| [ OK ] Listening on Docker Socket for the API. | |
| [ OK ] Listening on Weston socket. | |
| [ OK ] Finished Reboot and dump vmcore via kexec. | |
| [ OK ] Reached target Socket Units. | |
| [ OK ] Started D-Bus System Message Bus. | |
| [ OK ] Reached target Basic System. | |
| [ OK ] Started Job spooling tools. | |
| [ 8.168339] scsi 0:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS | |
| [ 8.178037] sd 0:0:0:0: [sda] Media removed, stopped polling | |
| [ OK ] Started Periodic Command Scheduler 8.187375] sd 0:0:0:0: [sda] Attached SCSI removable disk | |
| [0m. | |
| Starting Print notice about GPLv3 packages... | |
| Starting IPv6 Packet Filtering Framework... | |
| Starting IPv4 Packet Filtering Framework... | |
| [ OK ] Started irqbalance daemon. | |
| Starting Lighttpd Daemon... | |
| [ OK ] Started strongSwan IPsec I…IKEv2 daemon using ipsec.conf. | |
| [ 8.278317] audit: type=1334 audit(1651452332.009:4): prog-id=7 op=LOAD | |
| [ 8.286861] audit: type=1334 audit(1651452332.021:5): prog-id=8 op=LOAD | |
| Starting User Login Management... | |
| [ OK ] Started TEE Supplicant. | |
| Starting Telnet Server... | |
| [ OK ] Finished IPv6 Packet Filtering Framework. | |
| [ OK ] Finished IPv4 Packet Filtering Framework. | |
| [ OK ] Finished Telnet Server. | |
| [ OK ] Reached target Preparation for Network. | |
| [ 8.361568] scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 | |
| [ 8.384041] sd 1:0:0:0: [sdb] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB) | |
| Starting Network Configuration... | |
| [ 8.396648] sd 1:0:0:0: [sdb] Write Protect is off | |
| [ 8.404862] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA | |
| [ OK ] Started Lighttpd Daemon. | |
| [ 8.440347] sdb: sdb1 sdb2 sdb3 sdb4 | |
| [ 8.446945] sd 1:0:0:0: [sdb] Attached SCSI removable disk | |
| [ 8.552523] scsi 2:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS | |
| [ OK ] Started User Login Management. | |
| [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. | |
| [ 8.830591] sd 2:0:0:0: [sdc] Media removed, stopped polling | |
| [ 8.837324] sd 2:0:0:0: [sdc] Attached SCSI removable disk | |
| [ 8.893388] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 8.911233] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 8.917842] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' | |
| [ OK ] Started Network Configuration. | |
| [ 9.004053] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| [ 9.013685] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| Starting Network Name Resolution... | |
| [ OK ] Started Network Name Resolution. | |
| [ OK ] Reached target Network. | |
| [ OK ] Reached target Host and Network Name Lookups. | |
| Starting Avahi mDNS/DNS-SD Stack... | |
| Starting Enable and configure wl18xx bluetooth stack... | |
| Starting containerd container runtime... | |
| [ OK ] Started Netperf Benchmark Server. | |
| [ OK ] Started NFS status monitor for NFSv2/3 locking.. | |
| Starting Permit User Sessions... | |
| [ OK ] Finished Enable and configure wl18xx bluetooth stack. | |
| [ OK ] Started Avahi mDNS/DNS-SD Stack. | |
| [ OK ] Finished Permit User Sessions. | |
| [ OK ] Started Getty on tty1. | |
| [ OK ] Started Serial Getty on ttyS2. | |
| [ OK ] Reached target Login Prompts. | |
| Starting Synchronize System and HW clocks... | |
| Starting Weston, a Wayland…ositor, as a system service... | |
| [ 9.754204] audit: type=1334 audit(1651452333.485:6): prog-id=9 op=LOAD | |
| [ 9.761076] audit: type=1334 audit(1651452333.493:7): prog-id=10 op=LOAD | |
| Starting User Database Manager... | |
| [ OK ] Started User Database Manager. | |
| [ OK ] Created slice User Slice of UID 1000. | |
| Starting User Runtime Directory /run/user/1000... | |
| [ OK ] Finished User Runtime Directory /run/user/1000. | |
| Starting User Manager for UID 1000... | |
| [ 10.168124] audit: type=1006 audit(1651452333.901:8): pid=843 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 | |
| [ 10.183229] audit: type=1300 audit(1651452333.901:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=fffffe2ca1a8 a2=4 a3=ffffb05a3020 items=0 ppid=1 pid=843 auid=1 | |
| 000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 10.209947] audit: type=1327 audit(1651452333.901:8): proctitle="(systemd)" | |
| [FAILED] Failed to start Synchronize System and HW clocks. | |
| See 'systemctl status sync-clocks.service' for details. | |
| [ OK ] Found device Cruzer_Blade ESP. | |
| Starting File System Check on /dev/sdb2... | |
| [ OK ] Found device Cruzer_Blade Ubuntu_23.10.1_amd64. | |
| Starting File System Check on /dev/sdb1... | |
| [ OK ] Finished File System Check on /dev/sdb2. | |
| Mounting /run/media/ESP-sdb2... | |
| [ OK ] Finished File System Check on /dev/sdb1. | |
| Mounting /run/media/Ubuntu 23.10.1 amd64-sdb1... | |
| [ OK ] Found device Cruzer_Blade writable. | |
| Starting File System Check on /dev/sdb4... | |
| [ OK ] Mounted /run/media/ESP-sdb2. | |
| [FAILED] Failed to mount /run/media/Ubuntu 23.10.1 amd64-sdb1. | |
| See 'systemctl status "run-media-Ubuntu…\x20amd64\\x2dsdb1.mount"' for details. | |
| [ OK ] Started containerd container runtime. | |
| [ OK ] Finished File System Check on /dev/sdb4. | |
| Mounting /run/media/writable-sdb4... | |
| [ OK ] Started User Manager for UID 1000. | |
| [ OK ] Started Session c1 of User weston. | |
| [ 11.206857] audit: type=1006 audit(1651452334.937:9): pid=775 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 | |
| [ 11.219927] audit: type=1300 audit(1651452334.937:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=fffffe2ca1a8 a2=4 a3=ffffb05a3020 items=0 ppid=1 pid=775 auid=1 | |
| 000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/lib/systemd/systemd" key=(null) | |
| [ 11.246953] audit: type=1327 audit(1651452334.937:9): proctitle="(weston)" | |
| [ 11.277211] EXT4-fs (sdb4): mounted filesystem 24868de9-205c-4349-a96e-d4e2ff6e826d r/w with ordered data mode. Quota mode: none. | |
| [ OK ] Mounted /run/media/writable-sdb4. | |
| [FAILED] Failed to start Weston, a …mpositor, as a system service. | |
| See 'systemctl status weston.service' for details. | |
| [DEPEND] Dependency failed for Matrix GUI. | |
| *************************************************************** | |
| *************************************************************** | |
| NOTICE: This file system contains the following GPL-3.0 packages: | |
| adwaita-icon-theme-symbolic | |
| autoconf | |
| bash | |
| bc | |
| binutils | |
| cifs-utils | |
| coreutils-stdbuf | |
| coreutils | |
| cpio | |
| cpp-symlinks | |
| cpp | |
| dosfstools | |
| elfutils | |
| g++-symlinks | |
| g++ | |
| gawk | |
| gcc-symlinks | |
| gcc | |
| gdb | |
| gdbserver | |
| gettext | |
| glmark2 | |
| gnu-config | |
| grub-common | |
| grub-editenv | |
| grub-efi | |
| gzip | |
| less | |
| libasm1 | |
| libatomic-dev | |
| libatomic1 | |
| libbfd | |
| libdebuginfod1 | |
| libdw1 | |
| libelf1 | |
| libgcc-s-dev | |
| libgcc1 | |
| libgdbm-compat4 | |
| libgdbm6 | |
| libgettextlib | |
| libgettextsrc | |
| libgmp10 | |
| libidn2-0 | |
| libmpc3 | |
| libmpfr6 | |
| libopcodes | |
| libqt5charts-examples | |
| libqt5charts-plugins | |
| libqt5charts-qmlplugins | |
| libqt5charts5 | |
| libqt5sensors-plugins | |
| libqt5sensors-qmlplugins | |
| libqt5sensors5 | |
| libqt5serialport-examples | |
| libqt5serialport-plugins | |
| libqt5serialport-qmlplugins | |
| libqt5serialport5 | |
| libqt5svg-examples | |
| libqt5svg-plugins | |
| libqt5svg-qmlplugins | |
| libqt5svg5 | |
| libqt5virtualkeyboard-plugins | |
| libqt5virtualkeyboard-qmlplugins | |
| libqt5virtualkeyboard5 | |
| libqt5webchannel-plugins | |
| libqt5webchannel-qmlplugins | |
| libqt5webchannel5 | |
| libreadline8 | |
| libstdc++-dev | |
| libstdc++6 | |
| libunistring2 | |
| m4 | |
| make | |
| nettle | |
| parted | |
| piglit | |
| qt3d-plugins | |
| qt3d-qmlplugins | |
| qt3d | |
| qtbase-examples | |
| qtbase-plugins | |
| qtbase-qmlplugins | |
| qtbase | |
| qtconnectivity-plugins | |
| qtconnectivity-qmlplugins | |
| qtconnectivity | |
| qtdeclarative-plugins | |
| qtdeclarative-qmlplugins | |
| qtdeclarative-tools | |
| qtdeclarative | |
| qtgraphicaleffects-qmlplugins | |
| qtlocation-examples | |
| qtlocation-plugins | |
| qtlocation-qmlplugins | |
| qtlocation | |
| qtmultimedia-examples | |
| qtmultimedia-plugins | |
| qtmultimedia-qmlplugins | |
| qtmultimedia | |
| qtquics-qmlplugins.control | |
| qtquics2-plugins.control | |
| qtquics2-qmlplugins.control | |
| qtquics2.control | |
| qtscript-examples | |
| qtscript-plugins | |
| qtscript-qmlplugins | |
| qtscript | |
| qtwayland-examples | |
| qtwayland-plugins | |
| qtwayland-qmlplugins | |
| qtwayland | |
| tar | |
| which | |
| If you do not wish to distribute GPL-3.0 components please remove | |
| the above packages prior to distribution. This can be done using | |
| the opkg remove command. i.e.: | |
| opkg remove <package> | |
| Where <package> is the name printed in the list above | |
| NOTE: If the package is a dependency of another package you | |
| will be notified of the dependent packages. You should | |
| use the --force-removal-of-dependent-packages option to | |
| also remove the dependent packages as well | |
| *************************************************************** | |
| *************************************************************** | |
| [ OK ] Finished Print notice about GPLv3 packages. | |
| [ OK ] Reached target Multi-User System. | |
| [ OK ] Reached target Graphical Interface. | |
| Starting Record Runlevel Change in UTMP... | |
| [ OK ] Finished Record Runlevel Change in UTMP. | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project j722s-evm - | |
| Arago 2023.10 j722s-evm - | |
| j722s-evm login: root | |
| [ 15.001951] audit: type=1006 audit(1651452338.733:10): pid=1268 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 | |
| [ 15.014529] audit: type=1300 audit(1651452338.733:10): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=fffffe2ca1a8 a2=1 a3=ffffb05a3020 items=0 ppid=1 pid=1268 auid | |
| =0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 15.040980] audit: type=1327 audit(1651452338.733:10): proctitle="(systemd)" | |
| [ 15.048069] audit: type=1334 audit(1651452338.757:11): prog-id=11 op=LOAD | |
| [ 15.054939] audit: type=1300 audit(1651452338.757:11): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffff0a7520 a2=78 a3=0 items=0 ppid=1 pid=1268 auid=0 uid=0 | |
| gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null) | |
| [ 15.080434] audit: type=1327 audit(1651452338.757:11): proctitle="(systemd)" | |
| [ 15.087540] audit: type=1334 audit(1651452338.773:12): prog-id=11 op=UNLOAD | |
| [ 15.094549] audit: type=1300 audit(1651452338.773:12): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=ffffaebb4020 a2=0 a3=ffffaebb47e0 items=0 ppid=1 pid=1268 auid | |
| =0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null) | |
| [ 15.120802] audit: type=1327 audit(1651452338.773:12): proctitle="(systemd)" | |
| [ 15.127919] audit: type=1334 audit(1651452338.773:13): prog-id=12 op=LOAD | |
| root@j722s-evm:~# | |
| root@j722s-evm:~# | |
| root@j722s-evm:~# uname -a | |
| Linux j722s-evm 6.10.0-rc1-next-20240531-00007-ge81c1a200822 #809 SMP PREEMPT Sat Jun 1 17:12:19 IST 2024 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j722s-evm:~# lspci | |
| 00:00.0 PCI bridge: Texas Instruments Device b010 | |
| 01:00.0 Non-Volatile memory controller: Intel Corporation Optane SSD 900P Series | |
| root@j722s-evm:~# hdparm -tT /dev/nvme0n1 | |
| /dev/nvme0n1: | |
| Timing cached reads: 1804 MB in 2.00 seconds = 902.11 MB/sec | |
| Timing buffered disk reads: 1398 MB in 3.00 seconds = 465.82 MB/sec | |
| root@j722s-evm:~# | |
| root@j722s-evm:~# lsusb | |
| Bus 002 Device 002: ID 0451:8140 Texas Instruments, Inc. TUSB8041 4-Port Hub | |
| Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub | |
| Bus 001 Device 006: ID 14cd:1212 Super Top microSD card reader (SY-T18) | |
| Bus 001 Device 005: ID 0781:5567 SanDisk Corp. Cruzer Blade | |
| Bus 001 Device 004: ID 14cd:125c Super Top SD card reader | |
| Bus 001 Device 002: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub | |
| Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub | |
| root@j722s-evm:~# lsusb -t | |
| /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M | |
| |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M | |
| /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M | |
| |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M | |
| |__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M | |
| |__ Port 2: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M | |
| |__ Port 4: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 480M | |
| root@j722s-evm:~# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment