uart_smc_trapping.txt

INFO:    BL33 will boot in Non-secure AArch64 EL2 mode. Sikki Ladho.
NOTICE:  BL31: v2.5(debug):v2.5-432-ga4ea20502-dirty
NOTICE:  BL31: Built : 20:50:16, Dec  8 2021
INFO:    Changed device tree to advertise PSCI.
INFO:    ARM GICv2 driver initialized
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a72: CPU workaround for 859971 was applied
WARNING: BL31: cortex_a72: CPU workaround for 1319367 was missing!
INFO:    BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied
INFO:    BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9
Leo Hypervisor Running...
Exception level: 2
DTB Address: 2eff3800
DTB is a valid DTB.
Deleted "linux,initrd-end" and  "linux,initrd-start" from DTB.
CHANGED THE ENABLE METHOD TO PSCI.
CHANGED THE ENABLE METHOD TO PSCI.
CHANGED THE ENABLE METHOD TO PSCI.
CHANGED THE ENABLE METHOD TO PSCI.
Jumping into Linux kernel...
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.10.95-v8+ (larbs@arch) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #4 SMP PREEMPT Thu Mar 3 19:31:58 PKT 2022
[    0.000000] random: fast init done
[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000007ffff]
[    0.000000]   node   0: [mem 0x0000000000080000-0x000000003b3fffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 32 pages/cpu s91416 r8192 d31464 u131072
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 996912
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:A7:BC:FC vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=9893abc8-02 rootfstype=ext4 fsck.repair=yes rootwait
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[    0.000000] Memory: 3554008K/4050944K available (11392K kernel code, 1948K rwdata, 3956K rodata, 3648K init, 1255K bss, 169256K reserved, 327680K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 35675 entries in 140 pages
[    0.000000] ftrace: allocated 140 pages with 3 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
[    0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=1
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000244] Console: colour dummy device 80x25
[    0.000808] printk: console [tty1] enabled
[    0.000863] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000903] pid_max: default: 32768 minimum: 301
[    0.001046] LSM: Security Framework initializing
[    0.001261] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.001326] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002562] cgroup: Disabling memory control group subsystem
[    0.004808] rcu: Hierarchical SRCU implementation.
[    0.005814] EFI services will not be available.
[    0.006321] smp: Bringing up secondary CPUs ...
[    5.095298] CPU1: failed to come online
[    5.095328] CPU1: failed in unknown state : 0x0
[   10.222722] CPU2: failed to come online
[   10.222749] CPU2: failed in unknown state : 0x0
[   15.350145] CPU3: failed to come online
[   15.350172] CPU3: failed in unknown state : 0x0
[   15.350305] smp: Brought up 1 node, 1 CPU
[   15.350326] SMP: Total of 1 processors activated.
[   15.350352] CPU features: detected: 32-bit EL0 Support
[   15.350375] CPU features: detected: CRC32 instructions
[   15.350398] CPU features: detected: 32-bit EL1 Support
[   15.384097] CPU: All CPU(s) started at EL1
[   15.384158] alternatives: patching kernel code
[   15.385364] devtmpfs: initialized
[   15.395723] Enabled cp15_barrier support
[   15.395770] Enabled setend support
[   15.395958] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[   15.396001] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[   15.403877] pinctrl core: initialized pinctrl subsystem
[   15.404606] DMI not present or invalid.
[   15.404974] NET: Registered protocol family 16
[   15.407755] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[   15.408020] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[   15.408948] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[   15.409069] audit: initializing netlink subsys (disabled)
[   15.409860] thermal_sys: Registered thermal governor 'step_wise'
[   15.410068] cpuidle: using governor menu
[   15.410274] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[   15.410332] ASID allocator initialised with 65536 entries
[   15.410492] Serial: AMBA PL011 UART driver
[   15.414404] audit: type=2000 audit(15.384:1): state=initialized audit_enabled=0 res=1
[   15.449914] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[   15.458572] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-01-20T13:56:48, variant start
[   15.462583] raspberrypi-firmware soc:firmware: Firmware hash is bd88f66f8952d34e4e0613a85c7a6d3da49e13e2
[   15.497289] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[   15.501462] vgaarb: loaded
[   15.501895] SCSI subsystem initialized
[   15.502116] usbcore: registered new interface driver usbfs
[   15.502182] usbcore: registered new interface driver hub
[   15.502258] usbcore: registered new device driver usb
[   15.502627] usb_phy_generic phy: supply vcc not found, using dummy regulator
[   15.504359] clocksource: Switched to clocksource arch_sys_counter
[   16.521372] VFS: Disk quotas dquot_6.6.0
[   16.521486] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   16.521647] FS-Cache: Loaded
[   16.521855] CacheFiles: Loaded
[   16.531010] NET: Registered protocol family 2
[   16.531461] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[   16.534778] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[   16.534889] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[   16.535257] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[   16.535939] TCP: Hash tables configured (established 32768 bind 32768)
[   16.536145] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[   16.536303] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[   16.536762] NET: Registered protocol family 1
[   16.537645] RPC: Registered named UNIX socket transport module.
[   16.537672] RPC: Registered udp transport module.
[   16.537692] RPC: Registered tcp transport module.
[   16.537711] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   16.537742] PCI: CLS 0 bytes, default 64
[   16.539516] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[   16.539777] kvm [1]: HYP mode not available
[   16.541800] Initialise system trusted keyrings
[   16.542112] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[   16.548384] zbud: loaded
[   16.550074] FS-Cache: Netfs 'nfs' registered for caching
[   16.550700] NFS: Registering the id_resolver key type
[   16.550749] Key type id_resolver registered
[   16.550769] Key type id_legacy registered
[   16.550900] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   16.550926] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[   16.552032] Key type asymmetric registered
[   16.552059] Asymmetric key parser 'x509' registered
[   16.552122] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[   16.552401] io scheduler mq-deadline registered
[   16.552428] io scheduler kyber registered
[   16.556512] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[   16.556557] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[   16.556641] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[   16.556742] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[   16.606453] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[   16.606853] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[   16.606884] pci_bus 0000:00: root bus resource [bus 00-ff]
[   16.606911] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[   16.607004] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[   16.607243] pci 0000:00:00.0: PME# supported from D0 D3hot
[   16.611237] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[   16.611373] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[   16.611801] pci 0000:01:00.0: PME# supported from D0 D3cold
[   16.623712] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[   16.623749] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[   16.623799] pci 0000:00:00.0: PCI bridge to [bus 01]
[   16.623830] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[   16.630040] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[   16.630909] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[   16.633297] iproc-rng200 fe104000.rng: hwrng registered
[   16.633697] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[   16.634662] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[   16.634975] cacheinfo: Unable to detect cache hierarchy for CPU 0
[   16.645834] brd: module loaded
[   16.657735] loop: module loaded
[   16.659429] Loading iSCSI transport class v2.0-870.
[   16.664181] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[   16.724517] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[   16.725565] usbcore: registered new interface driver r8152
[   16.725651] usbcore: registered new interface driver lan78xx
[   16.725718] usbcore: registered new interface driver smsc95xx
[   16.727260] pci 0000:00:00.0: enabling device (0000 -> 0002)
[   16.727307] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
[   16.727416] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   16.727458] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[   16.728165] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00001e0000000890
[   16.729132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[   16.729166] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   16.729191] usb usb1: Product: xHCI Host Controller
[   16.729213] usb usb1: Manufacturer: Linux 5.10.95-v8+ xhci-hcd
[   16.729235] usb usb1: SerialNumber: 0000:01:00.0
[   16.729910] hub 1-0:1.0: USB hub found
[   16.730018] hub 1-0:1.0: 1 port detected
[   16.730651] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   16.730686] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[   16.730722] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[   16.731189] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[   16.731220] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   16.731245] usb usb2: Product: xHCI Host Controller
[   16.731266] usb usb2: Manufacturer: Linux 5.10.95-v8+ xhci-hcd
[   16.731287] usb usb2: SerialNumber: 0000:01:00.0
[   16.731922] hub 2-0:1.0: USB hub found
[   16.732022] hub 2-0:1.0: 4 ports detected
[   16.733790] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[   16.734604] usbcore: registered new interface driver uas
[   16.734706] usbcore: registered new interface driver usb-storage
[   16.734920] mousedev: PS/2 mouse device common for all mice
[   16.737034] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[   16.740137] sdhci: Secure Digital Host Controller Interface driver
[   16.740165] sdhci: Copyright(c) Pierre Ossman
[   16.740959] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[   16.741528] sdhci-pltfm: SDHCI platform and OF driver helper
[   16.745541] ledtrig-cpu: registered to indicate activity on CPUs
[   16.745854] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[   16.745979] hid: raw HID events driver (C) Jiri Kosina
[   16.746153] usbcore: registered new interface driver usbhid
[   16.746176] usbhid: USB HID core driver
[   16.746469] ashmem: initialized
[   16.754302] Initializing XFRM netlink socket
[   16.754366] NET: Registered protocol family 17
[   16.754499] Key type dns_resolver registered
[   16.754911] registered taskstats version 1
[   16.754956] Loading compiled-in X.509 certificates
[   16.755433] Key type ._fscrypt registered
[   16.755459] Key type .fscrypt registered
[   16.755479] Key type fscrypt-provisioning registered
[   16.766869] uart-pl011 fe201000.serial: there is not valid maps for state default
[   16.767156] uart-pl011 fe201000.serial: cts_event_workaround enabled
[   16.767262] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 23, base_baud = 0) is a PL011 rev2
[   16.773345] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[   16.773976] printk: console [ttyS0] disabled
[   16.774099] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 24, base_baud = 62500000) is a 16550
[   18.107957] printk: console [ttyS0] enabled
[   18.113096] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[   18.121386] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[   18.127518] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[   18.165725] of_cfs_init
[   18.169256] of_cfs_init: OK
[   18.184864] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[   18.192129] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[   18.199528] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[   18.208291] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[   18.213915] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[   18.222594] Waiting for root device PARTUUID=9893abc8-02...
[   18.228729] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[   18.264404] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[   18.312283] mmc1: new high speed SDIO card at address 0001
[   18.340442] mmc0: new ultra high speed DDR50 SDHC card at address 1234
[   18.347945] mmcblk0: mmc0:1234 SA16G 14.4 GiB
[   18.354544]  mmcblk0: p1 p2
[   18.379076] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[   18.386632] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[   18.419094] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[   18.427597] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   18.435049] usb 1-1: Product: USB2.0 Hub
[   18.441676] hub 1-1:1.0: USB hub found
[   18.445932] hub 1-1:1.0: 4 ports detected
[   18.458798] EXT4-fs (mmcblk0p2): recovery complete
[   18.465575] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   18.473904] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[   18.486430] devtmpfs: mounted
[   18.495959] Freeing unused kernel memory: 3648K
[   18.500756] Run /sbin/init as init process
[   18.863316] systemd[1]: System time before build time, advancing clock.
[   18.923524] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[   18.948646] systemd[1]: Detected architecture arm64.
[   18.961651] systemd[1]: Set hostname to <raspberrypi>.
[   19.840174] systemd[1]: Queued start job for default target Graphical Interface.
[   19.849177] random: systemd: uninitialized urandom read (16 bytes read)
[   19.858091] systemd[1]: Created slice system-getty.slice.
[   19.864534] random: systemd: uninitialized urandom read (16 bytes read)
[   19.872301] systemd[1]: Created slice system-modprobe.slice.
[   19.878558] random: systemd: uninitialized urandom read (16 bytes read)
[   19.886265] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   19.894004] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   19.901662] systemd[1]: Created slice User and Session Slice.
[   19.908521] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   19.917460] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   19.926586] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   19.936886] systemd[1]: Reached target Local Encrypted Volumes.
[   19.943512] systemd[1]: Reached target Paths.
[   19.948570] systemd[1]: Reached target Slices.
[   19.953600] systemd[1]: Reached target Swap.
[   19.959200] systemd[1]: Listening on Syslog Socket.
[   19.965342] systemd[1]: Listening on fsck to fsckd communication Socket.
[   19.973039] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   19.981277] systemd[1]: Listening on Journal Audit Socket.
[   19.988017] systemd[1]: Listening on Journal Socket (/dev/log).
[   19.995406] systemd[1]: Listening on Journal Socket.
[   20.007618] systemd[1]: Listening on udev Control Socket.
[   20.014418] systemd[1]: Listening on udev Kernel Socket.
[   20.021198] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[   20.033355] systemd[1]: Mounting POSIX Message Queue File System...
[   20.053803] systemd[1]: Mounting RPC Pipe File System...
[   20.075485] systemd[1]: Mounting Kernel Debug File System...
[   20.099584] systemd[1]: Mounting Kernel Trace File System...
[   20.116182] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[   20.131152] systemd[1]: Starting Restore / save the current clock...
[   20.152160] systemd[1]: Starting Set the console keyboard layout...
[   20.167943] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[   20.199393] systemd[1]: Starting Load Kernel Module configfs...
[   20.235339] systemd[1]: Starting Load Kernel Module drm...
[   20.274751] systemd[1]: Starting Load Kernel Module fuse...
[   20.295721] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   20.316059] systemd[1]: Starting File System Check on Root Device...
[   20.357241] systemd[1]: Starting Journal Service...
[   20.412614] systemd[1]: Starting Load Kernel Modules...
[   20.465244] systemd[1]: Starting Coldplug All udev Devices...
[   20.569712] systemd[1]: Mounted POSIX Message Queue File System.
[   20.609902] systemd[1]: Mounted RPC Pipe File System.
[   20.649463] systemd[1]: Mounted Kernel Debug File System.
[   20.688669] systemd[1]: Mounted Kernel Trace File System.
[   20.728555] systemd[1]: Finished Restore / save the current clock.
[   20.754844] systemd[1]: modprobe@configfs.service: Succeeded.
[   20.792580] systemd[1]: Finished Load Kernel Module configfs.
[   20.825718] systemd[1]: modprobe@drm.service: Succeeded.
[   20.852631] systemd[1]: Finished Load Kernel Module drm.
[   20.885465] systemd[1]: modprobe@fuse.service: Succeeded.
[   20.916545] systemd[1]: Finished Load Kernel Module fuse.
[   20.947526] systemd[1]: Finished File System Check on Root Device.
[   20.973946] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[   21.021397] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[   21.060662] systemd[1]: Failed to start Load Kernel Modules.
[   21.087163] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[   21.133444] systemd[1]: Mounting Kernel Configuration File System...
[   21.197021] systemd[1]: Started File System Check Daemon to report status.
[   21.249091] systemd[1]: Starting Remount Root and Kernel File Systems...
[   21.301137] systemd[1]: Starting Apply Kernel Variables...
[   21.370249] systemd[1]: Mounted Kernel Configuration File System.

Debian GNU/Linux 11 raspberrypi ttyS0

raspberrypi login: