lenovo.txt

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd4b0]
[    0.000000] Linux version 5.19.0-rc8+ (ryanh@debian) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #4 SMP PREEMPT Thu Jul 28 16:24:37 PDT 2022
[    0.000000] Machine model: Lenovo ThinkPad X13s
[    0.000000] efi: EFI v2.70 by Lenovo
[    0.000000] efi: MEMATTR=0x99939418 SMBIOS=0x9e4f8000 ESRT=0x9bc18e18 RTPROP=0x9e469698 TPMEventLog=0x8145d018 RNG=0x9e469718 MEMRESERVE=0x8e696d98 
[    0.000000] efi: seeding entropy pool
[    0.000000] random: crng init done
[    0.000000] TPM Final Events table not present
[    0.000000] esrt: Reserving ESRT space from 0x000000009bc18e18 to 0x000000009bc18e78.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000080600000-0x0000000c7fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xc7c0b1940-0xc7c0b3fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080600000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000c7fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080600000-0x00000000806fffff]
[    0.000000]   node   0: [mem 0x0000000080880000-0x00000000808affff]
[    0.000000]   node   0: [mem 0x00000000808c0000-0x00000000808effff]
[    0.000000]   node   0: [mem 0x0000000080c00000-0x000000008320efff]
[    0.000000]   node   0: [mem 0x000000008320f000-0x00000000839a5fff]
[    0.000000]   node   0: [mem 0x00000000839a6000-0x0000000083afffff]
[    0.000000]   node   0: [mem 0x000000008e400000-0x000000009e09cfff]
[    0.000000]   node   0: [mem 0x000000009e09d000-0x000000009e548fff]
[    0.000000]   node   0: [mem 0x000000009e549000-0x000000009f5cffff]
[    0.000000]   node   0: [mem 0x000000009f5f7000-0x000000009f5fffff]
[    0.000000]   node   0: [mem 0x000000009f600000-0x00000000ae9fffff]
[    0.000000]   node   0: [mem 0x00000000aea00000-0x00000000bfffffff]
[    0.000000]   node   0: [mem 0x00000000c6200000-0x00000000c85fffff]
[    0.000000]   node   0: [mem 0x00000000c8600000-0x00000003ffffffff]
[    0.000000]   node   0: [mem 0x0000000800000000-0x0000000c7fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080600000-0x0000000c7fffffff]
[    0.000000] On node 0, zone DMA: 1536 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 384 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 16 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 784 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 43264 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 39 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 25088 pages in unavailable ranges
[    0.000000] cma: Reserved 128 MiB at 0x00000000f8000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] psci: OSI mode supported.
[    0.000000] percpu: Embedded 30 pages/cpu s83496 r8192 d31192 u122880
[    0.000000] pcpu-alloc: s83496 r8192 d31192 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm)
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Hardware dirty bit management
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8187536
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-rc8+ root=UUID=156d46ee-e36b-4af7-bd71-a1f8cd0332d5 ro pd_ignore_unused clk_ignore_unused quiet
[    0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.19.0-rc8+", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000f4000000-0x00000000f8000000] (64MB)
[    0.000000] Memory: 1379816K/33269988K available (13760K kernel code, 3170K rwdata, 6728K rodata, 6528K init, 576K bss, 1098604K reserved, 131072K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 46478 entries in 182 pages
[    0.000000] ftrace: allocated 182 pages with 5 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: 960 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
[    0.000000] ITS [mem 0x17a40000-0x17a5ffff]
[    0.000000] ITS@0x0000000017a40000: allocated 8192 Devices @1001b0000 (indirect, esz 8, psz 64K, shr 1)
[    0.000000] ITS@0x0000000017a40000: allocated 32768 Interrupt Collections @1001c0000 (flat, esz 2, psz 64K, shr 1)
[    0.000000] GICv3: using LPI property table @0x00000001001d0000
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000001001f0000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000058] Console: colour dummy device 80x25
[    0.000072] printk: console [tty0] enabled
[    0.000099] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.000103] pid_max: default: 32768 minimum: 301
[    0.000137] LSM: Security Framework initializing
[    0.000149] Yama: becoming mindful.
[    0.000174] AppArmor: AppArmor initialized
[    0.000177] TOMOYO Linux initialized
[    0.000230] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000262] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000870] cblist_init_generic: Setting adjustable number of callback queues.
[    0.000875] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.000901] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.000924] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.000977] rcu: Hierarchical SRCU implementation.
[    0.000978] rcu: 	Max phase no-delay instances is 1000.
[    0.001333] Platform MSI: gic-its@17a40000 domain created
[    0.001376] PCI/MSI: /soc@0/interrupt-controller@17a00000/gic-its@17a40000 domain created
[    0.001416] fsl-mc MSI: gic-its@17a40000 domain created
[    0.001782] Remapping and enabling EFI services.
[    0.002270] smp: Bringing up secondary CPUs ...
[    0.002769] Detected PIPT I-cache on CPU1
[    0.002789] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
[    0.002798] GICv3: CPU1: using allocated LPI pending table @0x0000000100200000
[    0.002820] CPU1: Booted secondary processor 0x0000000100 [0x410fd4b0]
[    0.003393] Detected PIPT I-cache on CPU2
[    0.003408] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
[    0.003418] GICv3: CPU2: using allocated LPI pending table @0x0000000100210000
[    0.003440] CPU2: Booted secondary processor 0x0000000200 [0x410fd4b0]
[    0.004002] Detected PIPT I-cache on CPU3
[    0.004016] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
[    0.004025] GICv3: CPU3: using allocated LPI pending table @0x0000000100220000
[    0.004048] CPU3: Booted secondary processor 0x0000000300 [0x410fd4b0]
[    0.006647] Detected PIPT I-cache on CPU4
[    0.006666] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[    0.006677] GICv3: CPU4: using allocated LPI pending table @0x0000000100230000
[    0.006698] CPU4: Booted secondary processor 0x0000000400 [0x410fd4c0]
[    0.007291] Detected PIPT I-cache on CPU5
[    0.007303] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
[    0.007312] GICv3: CPU5: using allocated LPI pending table @0x0000000100240000
[    0.007332] CPU5: Booted secondary processor 0x0000000500 [0x410fd4c0]
[    0.007943] Detected PIPT I-cache on CPU6
[    0.007955] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
[    0.007964] GICv3: CPU6: using allocated LPI pending table @0x0000000100250000
[    0.007983] CPU6: Booted secondary processor 0x0000000600 [0x410fd4c0]
[    0.008626] Detected PIPT I-cache on CPU7
[    0.008639] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
[    0.008648] GICv3: CPU7: using allocated LPI pending table @0x0000000100260000
[    0.008668] CPU7: Booted secondary processor 0x0000000700 [0x410fd4c0]
[    0.008728] smp: Brought up 1 node, 8 CPUs
[    0.008735] SMP: Total of 8 processors activated.
[    0.008738] CPU features: detected: 32-bit EL0 Support
[    0.008739] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.008741] CPU features: detected: Common not Private translations
[    0.008742] CPU features: detected: CRC32 instructions
[    0.008744] CPU features: detected: Data cache clean to Point of Persistence
[    0.008746] CPU features: detected: Generic authentication (architected QARMA5 algorithm)
[    0.008747] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.008748] CPU features: detected: LSE atomic instructions
[    0.008750] CPU features: detected: Privileged Access Never
[    0.008751] CPU features: detected: RAS Extension Support
[    0.008753] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.016789] CPU: All CPU(s) started at EL1
[    0.016810] alternatives: patching kernel code
[    0.105605] node 0 deferred pages initialised in 88ms
[    0.105985] devtmpfs: initialized
[    0.110725] Registered cp15_barrier emulation handler
[    0.110733] Registered setend emulation handler
[    0.110736] KASLR enabled
[    0.110792] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.110803] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.111257] pinctrl core: initialized pinctrl subsystem
[    0.111496] SMBIOS 3.3 present.
[    0.111502] DMI: LENOVO 21BX0016US/21BX0016US, BIOS N3HET44W (1.16 ) 05/27/2022
[    0.111666] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.112357] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.112799] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.113229] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.113255] audit: initializing netlink subsys (disabled)
[    0.113321] audit: type=2000 audit(0.112:1): state=initialized audit_enabled=0 res=1
[    0.113681] thermal_sys: Registered thermal governor 'fair_share'
[    0.113683] thermal_sys: Registered thermal governor 'step_wise'
[    0.113685] thermal_sys: Registered thermal governor 'power_allocator'
[    0.114003] cpuidle: using governor ladder
[    0.114011] cpuidle: using governor menu
[    0.114069] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.114154] ASID allocator initialised with 32768 entries
[    0.114158] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[    0.114160] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
[    0.114161] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[    0.114163] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
[    0.114259] Serial: AMBA PL011 UART driver
[    0.120040] platform af00000.clock-controller: Fixing up cyclic dependency with aec5a00.phy
[    0.127586] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.127588] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.127590] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.127591] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.127910] ACPI: Interpreter disabled.
[    0.133874] iommu: Default domain type: Translated 
[    0.133876] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.133942] SCSI subsystem initialized
[    0.133970] usbcore: registered new interface driver usbfs
[    0.133977] usbcore: registered new interface driver hub
[    0.133985] usbcore: registered new device driver usb
[    0.134007] pps_core: LinuxPPS API ver. 1 registered
[    0.134009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.134011] PTP clock support registered
[    0.134018] EDAC MC: Ver: 3.0.0
[    0.134171] CPUidle PSCI: Initialized CPU PM domain topology
[    0.134234] qcom_scm: convention: smc arm 64
[    0.134551] NetLabel: Initializing
[    0.134553] NetLabel:  domain hash size = 128
[    0.134554] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.134568] NetLabel:  unlabeled traffic allowed by default
[    0.134606] vgaarb: loaded
[    0.134707] clocksource: Switched to clocksource arch_sys_counter
[    0.134818] VFS: Disk quotas dquot_6.6.0
[    0.134830] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.135028] AppArmor: AppArmor Filesystem Enabled
[    0.135039] pnp: PnP ACPI: disabled
[    0.136768] NET: Registered PF_INET protocol family
[    0.136904] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.140123] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.140160] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.140272] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.140558] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.140665] TCP: Hash tables configured (established 262144 bind 65536)
[    0.140724] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.140801] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.140891] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.140900] NET: Registered PF_XDP protocol family
[    0.140903] PCI: CLS 0 bytes, default 64
[    0.140994] Trying to unpack rootfs image as initramfs...
[    0.141288] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.141420] kvm [1]: HYP mode not available
[    0.153351] Initialise system trusted keyrings
[    0.153361] Key type blacklist registered
[    0.153415] workingset: timestamp_bits=42 max_order=23 bucket_order=0
[    0.154519] zbud: loaded
[    0.154684] integrity: Platform Keyring initialized
[    0.154693] xor: measuring software checksum speed
[    0.155318]    8regs           : 15923 MB/sec
[    0.155944]    32regs          : 15779 MB/sec
[    0.156418]    arm64_neon      : 20860 MB/sec
[    0.156419] xor: using function: arm64_neon (20860 MB/sec)
[    0.156423] Key type asymmetric registered
[    0.156425] Asymmetric key parser 'x509' registered
[    0.544389] Freeing initrd memory: 25548K
[    0.549939] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.549960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.550007] io scheduler mq-deadline registered
[    0.555092] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.558001] vreg_s11b: Setting 1272000-1272000uV
[    0.558128] vreg_l3b: Setting 1200000-1200000uV
[    0.558261] vreg_l4b: Setting 912000-912000uV
[    0.558327] vreg_l6b: Setting 880000-880000uV
[    0.558434] vreg_l1c: Setting 1800000-1800000uV
[    0.558499] vreg_l12c: Setting 1800000-1800000uV
[    0.558566] vreg_l13c: Setting 3072000-3072000uV
[    0.558646] vreg_l3d: Setting 1200000-1200000uV
[    0.558735] vreg_l4d: Setting 1200000-1200000uV
[    0.558798] vreg_l6d: Setting 880000-880000uV
[    0.558864] vreg_l7d: Setting 3072000-3072000uV
[    0.558927] vreg_l9d: Setting 912000-912000uV
[    0.559273] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.559731] Serial: AMBA driver
[    0.559797] msm_serial: driver initialized
[    0.561167] arm-smmu 15000000.iommu: probing hardware configuration...
[    0.561170] arm-smmu 15000000.iommu: SMMUv2 with:
[    0.561180] arm-smmu 15000000.iommu: 	stage 1 translation
[    0.561182] arm-smmu 15000000.iommu: 	non-coherent table walk
[    0.561183] arm-smmu 15000000.iommu: 	(IDR0.CTTW overridden by FW configuration)
[    0.561185] arm-smmu 15000000.iommu: 	stream matching with 162 register groups
[    0.561189] arm-smmu 15000000.iommu: 	110 context banks (0 stage-2 only)
[    0.561607] arm-smmu 15000000.iommu: 	Supported page sizes: 0x61311000
[    0.561609] arm-smmu 15000000.iommu: 	Stage-1: 36-bit VA -> 36-bit IPA
[    0.563965] spmi spmi-0: PMIC arbiter version v5 (0x50020000)
[    0.570549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.570554] ehci-pci: EHCI PCI platform driver
[    0.570560] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.570563] ohci-pci: OHCI PCI platform driver
[    0.570568] ohci-platform: OHCI generic platform driver
[    0.570673] usbcore: registered new interface driver usb-storage
[    0.570687] usbcore: registered new interface driver usbserial_generic
[    0.570692] usbserial: USB Serial support registered for generic
[    0.570787] mousedev: PS/2 mouse device common for all mice
[    0.573842] ledtrig-cpu: registered to indicate activity on CPUs
[    0.574155] efifb: probing for efifb
[    0.574169] efifb: framebuffer at 0xc6200000, using 9000k, total 9000k
[    0.574171] efifb: mode is 1920x1200x32, linelength=7680, pages=1
[    0.574173] efifb: scrolling: redraw
[    0.574173] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.574285] Console: switching to colour frame buffer device 240x75
[    0.575909] fb0: EFI VGA frame buffer device
[    0.576004] hid: raw HID events driver (C) Jiri Kosina
[    0.576023] usbcore: registered new interface driver usbhid
[    0.576024] usbhid: USB HID core driver
[    0.576735] NET: Registered PF_INET6 protocol family
[    0.581079] Segment Routing with IPv6
[    0.581088] In-situ OAM (IOAM) with IPv6
[    0.581103] mip6: Mobile IPv6
[    0.581105] NET: Registered PF_PACKET protocol family
[    0.581148] mpls_gso: MPLS GSO support
[    0.581439] registered taskstats version 1
[    0.581445] Loading compiled-in X.509 certificates
[    0.582026] zswap: loaded using pool lzo/zbud
[    0.582147] Key type ._fscrypt registered
[    0.582148] Key type .fscrypt registered
[    0.582149] Key type fscrypt-provisioning registered
[    0.582191] AppArmor: AppArmor sha1 policy hashing enabled
[    0.998758] cpu cpu0: Voltage update failed freq=300000
[    0.998784] cpu cpu0: failed to update OPP for freq=300000
[    1.003152] qcom-qmp-combo-phy 88ec000.phy-wrapper: Registered Qcom-QMP phy
[    1.003522] qcom-qmp-combo-phy 8904000.phy-wrapper: Registered Qcom-QMP phy
[    1.003755] qcom-qmp-pcie-phy 1c06000.phy: Registered Qcom-QMP phy
[    1.003964] qcom-qmp-pcie-phy 1c14000.phy: Registered Qcom-QMP phy
[    1.004169] qcom-qmp-pcie-phy 1c24000.phy: Registered Qcom-QMP phy
[    1.004595] qcom-pcie 1c00000.pcie: supply vdda not found, using dummy regulator
[    1.007824] qcom-pcie 1c00000.pcie: host bridge /soc@0/pcie@1c00000 ranges:
[    1.007835] qcom-pcie 1c00000.pcie:       IO 0x0030200000..0x00302fffff -> 0x0030200000
[    1.007840] qcom-pcie 1c00000.pcie:      MEM 0x0030300000..0x0031ffffff -> 0x0030300000
[    1.120755] qcom-pcie 1c00000.pcie: iATU unroll: enabled
[    1.120759] qcom-pcie 1c00000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[    1.221244] qcom-pcie 1c00000.pcie: Link up
[    1.221329] qcom-pcie 1c00000.pcie: PCI host bridge to bus 0006:00
[    1.221333] pci_bus 0006:00: root bus resource [bus 00-ff]
[    1.221337] pci_bus 0006:00: root bus resource [io  0x0000-0xfffff] (bus address [0x30200000-0x302fffff])
[    1.221340] pci_bus 0006:00: root bus resource [mem 0x30300000-0x31ffffff]
[    1.221356] pci 0006:00:00.0: [17cb:010e] type 01 class 0x060400
[    1.221365] pci 0006:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    1.221415] pci 0006:00:00.0: PME# supported from D0 D3hot D3cold
[    1.224511] pci 0006:01:00.0: [17cb:1103] type 00 class 0x028000
[    1.224631] pci 0006:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    1.225353] pci 0006:01:00.0: PME# supported from D0 D3hot D3cold
[    1.237976] pci 0006:00:00.0: BAR 14: assigned [mem 0x30400000-0x305fffff]
[    1.238005] pci 0006:00:00.0: BAR 15: assigned [mem 0x30600000-0x307fffff 64bit pref]
[    1.238018] pci 0006:00:00.0: BAR 0: assigned [mem 0x30300000-0x30300fff]
[    1.238031] pci 0006:00:00.0: BAR 13: assigned [io  0x1000-0x1fff]
[    1.238047] pci 0006:01:00.0: BAR 0: assigned [mem 0x30400000-0x305fffff 64bit]
[    1.238112] pci 0006:00:00.0: PCI bridge to [bus 01-ff]
[    1.238120] pci 0006:00:00.0:   bridge window [io  0x1000-0x1fff]
[    1.238129] pci 0006:00:00.0:   bridge window [mem 0x30400000-0x305fffff]
[    1.238136] pci 0006:00:00.0:   bridge window [mem 0x30600000-0x307fffff 64bit pref]
[    1.240048] pcieport 0006:00:00.0: PME: Signaling with IRQ 163
[    1.241747] pcieport 0006:00:00.0: AER: enabled with IRQ 163
[    1.241840] pcieport 0006:00:00.0: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
[    1.244873] qcom-pcie 1c10000.pcie: supply vdda not found, using dummy regulator
[    1.247194] qcom-pcie 1c10000.pcie: host bridge /soc@0/pcie@1c10000 ranges:
[    1.247243] qcom-pcie 1c10000.pcie:       IO 0x0034200000..0x00342fffff -> 0x0034200000
[    1.247269] qcom-pcie 1c10000.pcie:      MEM 0x0034300000..0x0035ffffff -> 0x0034300000
[    1.361113] qcom-pcie 1c10000.pcie: iATU unroll: enabled
[    1.361130] qcom-pcie 1c10000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[    2.365918] qcom-pcie 1c10000.pcie: Phy link never came up
[    2.366156] qcom-pcie 1c10000.pcie: PCI host bridge to bus 0004:00
[    2.366170] pci_bus 0004:00: root bus resource [bus 00-ff]
[    2.366184] pci_bus 0004:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x34200000-0x342fffff])
[    2.366193] pci_bus 0004:00: root bus resource [mem 0x34300000-0x35ffffff]
[    2.366230] pci 0004:00:00.0: [17cb:010e] type 01 class 0x060400
[    2.366252] pci 0004:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    2.366356] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold
[    2.371832] pci 0004:00:00.0: BAR 14: assigned [mem 0x34300000-0x344fffff]
[    2.371850] pci 0004:00:00.0: BAR 15: assigned [mem 0x34500000-0x346fffff 64bit pref]
[    2.371860] pci 0004:00:00.0: BAR 0: assigned [mem 0x34700000-0x34700fff]
[    2.371871] pci 0004:00:00.0: BAR 13: assigned [io  0x100000-0x100fff]
[    2.371882] pci 0004:00:00.0: PCI bridge to [bus 01-ff]
[    2.371890] pci 0004:00:00.0:   bridge window [io  0x100000-0x100fff]
[    2.371898] pci 0004:00:00.0:   bridge window [mem 0x34300000-0x344fffff]
[    2.371905] pci 0004:00:00.0:   bridge window [mem 0x34500000-0x346fffff 64bit pref]
[    2.373657] pcieport 0004:00:00.0: PME: Signaling with IRQ 169
[    2.375350] pcieport 0004:00:00.0: AER: enabled with IRQ 169
[    2.375445] pcieport 0004:00:00.0: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
[    4.395334] pcieport 0004:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
[    4.415382] pcieport 0004:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2040 msec ago)
[    6.435338] pcieport 0004:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago)
[    6.459214] pcieport 0004:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2044 msec ago)
[    6.460417] qcom-pcie 1c20000.pcie: supply vdda not found, using dummy regulator
[    6.463355] qcom-pcie 1c20000.pcie: host bridge /soc@0/pcie@1c20000 ranges:
[    6.463427] qcom-pcie 1c20000.pcie:       IO 0x003c200000..0x003c2fffff -> 0x003c200000
[    6.463459] qcom-pcie 1c20000.pcie:      MEM 0x003c300000..0x003dffffff -> 0x003c300000
[    6.577272] qcom-pcie 1c20000.pcie: iATU unroll: enabled
[    6.577289] qcom-pcie 1c20000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[    6.677919] qcom-pcie 1c20000.pcie: Link up
[    6.678145] qcom-pcie 1c20000.pcie: PCI host bridge to bus 0002:00
[    6.678158] pci_bus 0002:00: root bus resource [bus 00-ff]
[    6.678174] pci_bus 0002:00: root bus resource [io  0x200000-0x2fffff] (bus address [0x3c200000-0x3c2fffff])
[    6.678185] pci_bus 0002:00: root bus resource [mem 0x3c300000-0x3dffffff]
[    6.678225] pci 0002:00:00.0: [17cb:010e] type 01 class 0x060400
[    6.678249] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    6.678351] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
[    6.681478] pci 0002:01:00.0: [1cc4:6303] type 00 class 0x010802
[    6.681616] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    6.683141] pci 0002:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0002:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    6.698084] pci 0002:00:00.0: BAR 14: assigned [mem 0x3c300000-0x3c4fffff]
[    6.698115] pci 0002:00:00.0: BAR 15: assigned [mem 0x3c500000-0x3c6fffff 64bit pref]
[    6.698127] pci 0002:00:00.0: BAR 0: assigned [mem 0x3c700000-0x3c700fff]
[    6.698139] pci 0002:00:00.0: BAR 13: assigned [io  0x200000-0x200fff]
[    6.698156] pci 0002:01:00.0: BAR 0: assigned [mem 0x3c300000-0x3c303fff 64bit]
[    6.698223] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[    6.698231] pci 0002:00:00.0:   bridge window [io  0x200000-0x200fff]
[    6.698239] pci 0002:00:00.0:   bridge window [mem 0x3c300000-0x3c4fffff]
[    6.698246] pci 0002:00:00.0:   bridge window [mem 0x3c500000-0x3c6fffff 64bit pref]
[    6.700222] pcieport 0002:00:00.0: PME: Signaling with IRQ 175
[    6.702204] pcieport 0002:00:00.0: AER: enabled with IRQ 175
[    6.702300] pcieport 0002:00:00.0: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+
[    6.704868] nvme nvme0: pci function 0002:01:00.0
[    6.705778] nvme 0002:01:00.0: enabling device (0000 -> 0002)
[    6.706813] geni_se_qup 8c0000.geniqup: Adding to iommu group 0
[    6.709772] geni_se_qup 9c0000.geniqup: Adding to iommu group 1
[    6.710429] i2c_hid_of 0-002c: supply vddl not found, using dummy regulator
[    6.711457] geni_se_qup ac0000.geniqup: Adding to iommu group 2
[    6.711496] i2c_hid_of 0-0068: supply vddl not found, using dummy regulator
[    6.712099] i2c_hid_of 1-0010: supply vddl not found, using dummy regulator
[    6.716326] nvme nvme0: 8/0/0 default/read/poll queues
[    6.717375] dwc3 a600000.usb: Adding to iommu group 3
[    6.719821]  nvme0n1: p1 p2 p3
[    6.747660] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.747672] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.750133] xhci-hcd xhci-hcd.0.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x0000000000010010
[    6.750160] xhci-hcd xhci-hcd.0.auto: irq 194, io mem 0x0a600000
[    6.750247] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.750251] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.750256] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.1 Enhanced SuperSpeed
[    6.750360] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    6.750365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.750368] usb usb1: Product: xHCI Host Controller
[    6.750371] usb usb1: Manufacturer: Linux 5.19.0-rc8+ xhci-hcd
[    6.750374] usb usb1: SerialNumber: xhci-hcd.0.auto
[    6.751214] hub 1-0:1.0: USB hub found
[    6.751232] hub 1-0:1.0: 1 port detected
[    6.751389] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.751435] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[    6.751440] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.751443] usb usb2: Product: xHCI Host Controller
[    6.751446] usb usb2: Manufacturer: Linux 5.19.0-rc8+ xhci-hcd
[    6.751449] usb usb2: SerialNumber: xhci-hcd.0.auto
[    6.751961] hub 2-0:1.0: USB hub found
[    6.751980] hub 2-0:1.0: 1 port detected
[    6.757400] dwc3 a800000.usb: Adding to iommu group 4
[    6.788074] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.788098] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    6.790664] xhci-hcd xhci-hcd.1.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x0000000000010010
[    6.790759] xhci-hcd xhci-hcd.1.auto: irq 199, io mem 0x0a800000
[    6.790938] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.790950] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    6.790962] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed
[    6.791136] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    6.791148] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.791156] usb usb3: Product: xHCI Host Controller
[    6.791163] usb usb3: Manufacturer: Linux 5.19.0-rc8+ xhci-hcd
[    6.791170] usb usb3: SerialNumber: xhci-hcd.1.auto
[    6.792712] hub 3-0:1.0: USB hub found
[    6.792757] hub 3-0:1.0: 1 port detected
[    6.793126] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.793242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[    6.793265] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.793281] usb usb4: Product: xHCI Host Controller
[    6.793291] usb usb4: Manufacturer: Linux 5.19.0-rc8+ xhci-hcd
[    6.793297] usb usb4: SerialNumber: xhci-hcd.1.auto
[    6.794369] hub 4-0:1.0: USB hub found
[    6.794409] hub 4-0:1.0: 1 port detected
[    6.802383] PM: genpd: Not disabling unused power domains
[    6.802804] clk: Not disabling unused clocks
[    6.805590] input: hid-over-i2c 04F3:000D Keyboard as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-0/0-0068/0018:04F3:000D.0001/input/input0
[    6.805733] input: hid-over-i2c 04F3:000D Mouse as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-0/0-0068/0018:04F3:000D.0001/input/input1
[    6.806175] hid-generic 0018:04F3:000D.0001: input,hidraw0: I2C HID v1.00 Keyboard [hid-over-i2c 04F3:000D] on 0-0068
[    6.882447] input: hid-over-i2c 06CB:CE5C Mouse as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-0/0-002c/0018:06CB:CE5C.0002/input/input2
[    6.883650] input: hid-over-i2c 06CB:CE5C Touchpad as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-0/0-002c/0018:06CB:CE5C.0002/input/input3
[    6.886194] hid-generic 0018:06CB:CE5C.0002: input,hidraw1: I2C HID v1.00 Mouse [hid-over-i2c 06CB:CE5C] on 0-002c
[    6.889174] Freeing unused kernel memory: 6528K
[    6.959782] Checked W+X mappings: passed, no W+X pages found
[    6.959802] Run /init as init process
[    6.959805]   with arguments:
[    6.959808]     /init
[    6.959809]   with environment:
[    6.959810]     HOME=/
[    6.959811]     TERM=linux
[    6.959812]     BOOT_IMAGE=/boot/vmlinuz-5.19.0-rc8+
[    7.768292] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[    7.792769] usb 2-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[    7.792782] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    7.792787] usb 2-1: Product: USB 10/100/1000 LAN
[    7.792790] usb 2-1: Manufacturer: Realtek
[    7.792793] usb 2-1: SerialNumber: 000001000000
[    7.853014] PM: Image not found (code -22)
[    8.156394] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Quota mode: none.
[    8.200430] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    8.247664] systemd[1]: System time before build time, advancing clock.
[    8.252604] systemd[1]: Inserted module 'autofs4'
[    8.300335] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    8.300859] systemd[1]: Detected architecture arm64.
[    8.301252] systemd[1]: Set hostname to <debian>.
[    8.385756] systemd[1]: Queued start job for default target Graphical Interface.
[    8.386998] systemd[1]: Created slice system-getty.slice.
[    8.387391] systemd[1]: Created slice system-modprobe.slice.
[    8.387698] systemd[1]: Created slice User and Session Slice.
[    8.387805] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.387873] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.388096] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.388149] systemd[1]: Reached target Local Encrypted Volumes.
[    8.388192] systemd[1]: Reached target User and Group Name Lookups.
[    8.388214] systemd[1]: Reached target Slices.
[    8.392716] systemd[1]: Listening on RPCbind Server Activation Socket.
[    8.392917] systemd[1]: Listening on Syslog Socket.
[    8.393077] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.393165] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    8.393371] systemd[1]: Listening on Journal Audit Socket.
[    8.393503] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.393665] systemd[1]: Listening on Journal Socket.
[    8.393962] systemd[1]: Listening on udev Control Socket.
[    8.394093] systemd[1]: Listening on udev Kernel Socket.
[    8.395223] systemd[1]: Mounting Huge Pages File System...
[    8.396266] systemd[1]: Mounting POSIX Message Queue File System...
[    8.397226] systemd[1]: Mounting RPC Pipe File System...
[    8.398360] systemd[1]: Mounting Kernel Debug File System...
[    8.399374] systemd[1]: Mounting Kernel Trace File System...
[    8.399490] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    8.400595] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    8.401688] systemd[1]: Starting Load Kernel Module configfs...
[    8.402677] systemd[1]: Starting Load Kernel Module drm...
[    8.403626] systemd[1]: Starting Load Kernel Module fuse...
[    8.404109] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    8.404150] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    8.406152] systemd[1]: Starting Journal Service...
[    8.407636] systemd[1]: Starting Load Kernel Modules...
[    8.407857] fuse: init (API version 7.36)
[    8.408581] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.409560] systemd[1]: Starting Coldplug All udev Devices...
[    8.411493] systemd[1]: Mounted Huge Pages File System.
[    8.411650] systemd[1]: Mounted POSIX Message Queue File System.
[    8.411687] RPC: Registered named UNIX socket transport module.
[    8.411690] RPC: Registered udp transport module.
[    8.411690] RPC: Registered tcp transport module.
[    8.411691] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.411775] systemd[1]: Mounted Kernel Debug File System.
[    8.411903] systemd[1]: Mounted Kernel Trace File System.
[    8.412357] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    8.413167] systemd[1]: Mounted RPC Pipe File System.
[    8.413442] systemd[1]: modprobe@configfs.service: Succeeded.
[    8.413769] systemd[1]: Finished Load Kernel Module configfs.
[    8.414112] systemd[1]: modprobe@drm.service: Succeeded.
[    8.414486] systemd[1]: Finished Load Kernel Module drm.
[    8.414656] EXT4-fs (nvme0n1p2): re-mounted. Quota mode: none.
[    8.414943] systemd[1]: modprobe@fuse.service: Succeeded.
[    8.415263] systemd[1]: Finished Load Kernel Module fuse.
[    8.416396] systemd[1]: Finished Load Kernel Modules.
[    8.416841] systemd[1]: Finished Remount Root and Kernel File Systems.
[    8.417859] systemd[1]: Mounting FUSE Control File System...
[    8.418777] systemd[1]: Mounting Kernel Configuration File System...
[    8.419205] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    8.419263] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    8.420062] systemd[1]: Starting Load/Save Random Seed...
[    8.420993] systemd[1]: Starting Apply Kernel Variables...
[    8.421922] systemd[1]: Starting Create System Users...
[    8.423036] systemd[1]: Mounted FUSE Control File System.
[    8.423169] systemd[1]: Mounted Kernel Configuration File System.
[    8.426137] systemd[1]: Finished Load/Save Random Seed.
[    8.426329] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    8.427882] systemd[1]: Finished Apply Kernel Variables.
[    8.428287] systemd[1]: Finished Create System Users.
[    8.429179] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.437269] systemd[1]: Finished Create Static Device Nodes in /dev.
[    8.437398] systemd[1]: Reached target Local File Systems (Pre).
[    8.438876] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    8.442063] systemd[1]: Started Journal Service.
[    8.449127] systemd-journald[307]: Received client request to flush runtime journal.
[    8.449971] systemd-journald[307]: File /var/log/journal/a7530b01335b46a4982bbcf32a3eb8c8/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    8.511090] qcom_q6v5_pas 3000000.remoteproc: supply cx not found, using dummy regulator
[    8.511136] qcom_q6v5_pas 3000000.remoteproc: supply px not found, using dummy regulator
[    8.529859] NET: Registered PF_QIPCRTR protocol family
[    8.535960] remoteproc remoteproc0: 3000000.remoteproc is available
[    8.545689] qcom_q6v5_pas 1b300000.remoteproc: supply cx not found, using dummy regulator
[    8.545742] qcom_q6v5_pas 1b300000.remoteproc: supply px not found, using dummy regulator
[    8.550117] remoteproc remoteproc1: 1b300000.remoteproc is available
[    8.551419] remoteproc remoteproc0: powering up 3000000.remoteproc
[    8.551424] remoteproc remoteproc0: Booting fw image qcom/sc8280xp/qcadsp8280.mbn, size 14367860
[    8.553085] remoteproc remoteproc1: powering up 1b300000.remoteproc
[    8.553090] remoteproc remoteproc1: Booting fw image qcom/sc8280xp/qccdsp8280.mbn, size 3575808
[    8.597517] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.598579] msm-mdss ae00000.mdss: Adding to iommu group 5
[    8.599151] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0xc6235a00, fsynr=0x5f0021, cbfrsynra=0x1000, cb=5
[    8.599184] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0xc623ac00, fsynr=0x5f0021, cbfrsynra=0x1000, cb=5
[    8.599208] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0xc623e100, fsynr=0x5f0021, cbfrsynra=0x1400, cb=5
[    8.599234] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0xc6241600, fsynr=0x5f0021, cbfrsynra=0x1000, cb=5
[    8.599252] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0xc6244300, fsynr=0x5f0021, cbfrsynra=0x1400, cb=5
[    8.599269] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0xc6246b00, fsynr=0x5f0021, cbfrsynra=0x1400, cb=5
[    8.599297] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0xc6249300, fsynr=0x5f0021, cbfrsynra=0x1400, cb=5
[    8.599315] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0xc624d000, fsynr=0x5f0021, cbfrsynra=0x1000, cb=5
[    8.599334] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0xc624f900, fsynr=0x5f0021, cbfrsynra=0x1400, cb=5
[    8.599354] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0xc6252300, fsynr=0x5f0021, cbfrsynra=0x1400, cb=5
[    8.617909] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.619175] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[    8.621489] usbcore: registered new interface driver r8152
[    8.623968] Adding 16777212k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:16777212k SSFS
[    8.638994] usbcore: registered new interface driver cdc_ether
[    8.656209] ath11k_pci 0006:01:00.0: BAR 0: assigned [mem 0x30400000-0x305fffff 64bit]
[    8.656340] ath11k_pci 0006:01:00.0: enabling device (0000 -> 0002)
[    8.659942] platform aea0000.displayport-controller: Fixing up cyclic dependency with ae01000.mdp
[    8.685802] ath11k_pci 0006:01:00.0: MSI vectors: 32
[    8.685842] ath11k_pci 0006:01:00.0: wcn6855 hw2.1
[    8.690474] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    8.691095] msm-dp-display aea0000.displayport-controller: supply vdda-1p2 not found, using dummy regulator
[    8.695986] msm-dp-display aea0000.displayport-controller: supply vdda-0p9 not found, using dummy regulator
[    8.705002] msm_dpu ae01000.mdp: bound aea0000.displayport-controller (ops dp_display_comp_ops [msm])
[    8.705171] msm_dpu ae01000.mdp: dev_pm_opp_set_rate: failed to find OPP for freq 500000000 (-34)
[    8.714408] [drm:dpu_kms_hw_init:1103] dpu hardware revision:0x80000000
[    8.729875] remoteproc remoteproc1: remote processor 1b300000.remoteproc is now up
[    8.731171] remoteproc remoteproc0: remote processor 3000000.remoteproc is now up
[    8.769633] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@1: Adding to iommu group 6
[    8.777046] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@2: Adding to iommu group 7
[    8.780699] panel-simple-dp-aux aux-aea0000.displayport-controller: supply power not found, using dummy regulator
[    8.784836] input: hid-over-i2c 06CB:CE5C Mouse as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-0/0-002c/0018:06CB:CE5C.0002/input/input5
[    8.784932] input: hid-over-i2c 06CB:CE5C Touchpad as /devices/platform/soc@0/8c0000.geniqup/894000.i2c/i2c-0/0-002c/0018:06CB:CE5C.0002/input/input6
[    8.785017] hid-multitouch 0018:06CB:CE5C.0002: input,hidraw1: I2C HID v1.00 Mouse [hid-over-i2c 06CB:CE5C] on 0-002c
[    8.792269] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 8
[    8.795929] pm8941-pwrkey c440000.spmi:pmic@0:pon@1300:pwrkey: PON_PBS address missing, can't read HW debounce time
[    8.800588] input: pmic_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@1300/c440000.spmi:pmic@0:pon@1300:pwrkey/input/input8
[    8.801160] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 9
[    8.808865] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 10
[    8.811148] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 11
[    8.811453] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 12
[    8.815047] usb 2-1: reset SuperSpeed USB device number 2 using xhci-hcd
[    8.815595] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 13
[    8.815921] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@9: Adding to iommu group 14
[    8.816179] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@10: Adding to iommu group 14
[    8.842909] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@11: Adding to iommu group 15
[    8.843120] panel-simple-dp-aux aux-aea0000.displayport-controller: Detected IVO M133NW4J-R3 (0x854b)
[    8.845033] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@12: Adding to iommu group 16
[    8.852149] r8152 2-1:1.0: Direct firmware load for rtl_nic/rtl8153a-3.fw failed with error -2
[    8.852153] r8152 2-1:1.0: unable to load firmware patch rtl_nic/rtl8153a-3.fw (-2)
[    8.854672] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@13: Adding to iommu group 17
[    8.854901] mhi mhi0: Requested to power ON
[    8.855005] mhi mhi0: Power on setup success
[    8.870808] qcom,fastrpc-cb 1b300000.remoteproc:glink-edge:fastrpc:compute-cb@14: Adding to iommu group 18
[    8.874872] [drm] Initialized msm 1.9.0 20130625 for ae01000.mdp on minor 0
[    8.874917] msm_dpu ae01000.mdp: no GPU device was found
[    8.885253] Console: switching to colour dummy device 80x25
[    8.915373] r8152 2-1:1.0 eth0: v1.12.13
[    8.924865] r8152 2-1:1.0 enx9cebe853f578: renamed from eth0
[    8.938824] ------------[ cut here ]------------
[    8.938827] disp0_cc_mdss_dptx3_pixel0_clk_src: rcg didn't update its configuration.
[    8.938834] WARNING: CPU: 5 PID: 175 at drivers/clk/qcom/clk-rcg2.c:132 update_config+0xd0/0xe0
[    8.938842] Modules linked in: snd_soc_hdmi_codec snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd soundcore qrtr_smd pm8941_pwrkey binfmt_misc nls_ascii nls_cp437 vfat ath11k_pci(+) fat ath11k cdc_ether mac80211 usbnet libarc4 aes_ce_blk aes_ce_cipher r8152 ghash_ce mii gf128mul joydev evdev cfg80211 sha2_ce msm qcom_pon rfkill hid_multitouch sha256_arm64 mhi sha1_ce ocmem gpu_sched llcc_qcom qrtr qcom_q6v5_pas qcom_pil_info qcom_q6v5 qcom_sysmon qcom_common mdt_loader fuse configfs sunrpc ip_tables x_tables autofs4 ext4 mbcache jbd2
[    8.938877] CPU: 5 PID: 175 Comm: kworker/u16:4 Not tainted 5.19.0-rc8+ #4
[    8.938879] Hardware name: LENOVO 21BX0016US/21BX0016US, BIOS N3HET44W (1.16 ) 05/27/2022
[    8.938880] Workqueue: events_unbound deferred_probe_work_func
[    8.938884] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    8.938886] pc : update_config+0xd0/0xe0
[    8.938887] lr : update_config+0xd0/0xe0
[    8.938888] sp : ffff80000c39afc0
[    8.938889] x29: ffff80000c39afc0 x28: 0000000000000001 x27: ffff6df8c612c2c8
[    8.938890] x26: ffffc83aba93d500 x25: 0000000000000000 x24: 00000000092a09f0
[    8.938892] x23: 0000000050775d80 x22: ffffc83af76c8b68 x21: ffffc83af6d500d0
[    8.938894] x20: ffffc83af76c8b50 x19: 0000000000000000 x18: 0000000000000000
[    8.938896] x17: 0000000000000000 x16: ffffc83af608c8e0 x15: 0000fffffd9cd418
[    8.938897] x14: 0000000000000000 x13: 2e6e6f6974617275 x12: 6769666e6f632073
[    8.938899] x11: 7469206574616470 x10: 752074276e646964 x9 : ffffc83af5bc8104
[    8.938900] x8 : 2073746920657461 x7 : 6470752074276e64 x6 : ffff80000c39adb0
[    8.938902] x5 : 00000000fffff27a x4 : 0000000000000001 x3 : ffffc83af7023008
[    8.938903] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6df8c7725140
[    8.938905] Call trace:
[    8.938905]  update_config+0xd0/0xe0
[    8.938907]  clk_rcg2_configure+0xb4/0xc0
[    8.938908]  clk_rcg2_dp_set_rate+0x120/0x164
[    8.938910]  clk_change_rate+0xdc/0x4e0
[    8.938912]  clk_change_rate+0x15c/0x4e0
[    8.938914]  clk_core_set_rate_nolock+0x1c0/0x2a4
[    8.938915]  clk_set_rate+0x44/0x18c
[    8.938917]  qcom_edp_phy_power_on+0x4fc/0x8d0
[    8.938920]  phy_power_on+0x84/0x134
[    8.938921]  dp_ctrl_enable_mainlink_clocks+0xb8/0x124 [msm]
[    8.938951]  dp_ctrl_on_link+0xa0/0x450 [msm]
[    8.938970]  dp_display_process_hpd_high+0xa0/0xf0 [msm]
[    8.938987]  dp_hpd_plug_handle.part.0+0x90/0x120 [msm]
[    8.939004]  dp_bridge_enable+0x48/0x20c [msm]
[    8.939021]  drm_atomic_bridge_chain_enable+0x94/0xd4
[    8.939023]  drm_atomic_helper_commit_modeset_enables+0x194/0x270
[    8.939026]  msm_atomic_commit_tail+0x1bc/0x8d0 [msm]
[    8.939044]  commit_tail+0xac/0x184
[    8.939046]  drm_atomic_helper_commit+0x154/0x380
[    8.939047]  drm_atomic_commit+0xb0/0xf0
[    8.939048]  drm_client_modeset_commit_atomic+0x208/0x260
[    8.939051]  drm_client_modeset_commit_locked+0x68/0x1a0
[    8.939052]  drm_client_modeset_commit+0x3c/0x64
[    8.939054]  drm_fb_helper_set_par+0xd4/0x130
[    8.939056]  fbcon_init+0x214/0x460
[    8.939058]  visual_init+0xb8/0x110
[    8.939059]  do_bind_con_driver.isra.0+0x1cc/0x3a0
[    8.939061]  do_take_over_console+0x150/0x210
[    8.939063]  do_fbcon_takeover+0x74/0xf0
[    8.939064]  fbcon_fb_registered+0x1cc/0x1d4
[    8.939065]  register_framebuffer+0x1e8/0x2b0
[    8.939067]  __drm_fb_helper_initial_config_and_unlock+0x344/0x560
[    8.939068]  drm_fb_helper_initial_config+0x58/0x70
[    8.939070]  msm_fbdev_init+0x98/0x100 [msm]
[    8.939086]  msm_drm_bind+0x528/0x600 [msm]
[    8.939102]  try_to_bring_up_aggregate_device+0x230/0x320
[    8.939104]  __component_add+0xc4/0x1c0
[    8.939105]  component_add+0x20/0x30
[    8.939107]  dp_display_probe+0x2ac/0x470 [msm]
[    8.939122]  platform_probe+0x74/0xe4
[    8.939124]  really_probe+0x19c/0x3f0
[    8.939125]  __driver_probe_device+0x11c/0x190
[    8.939126]  driver_probe_device+0x44/0xf4
[    8.939128]  __device_attach_driver+0xa4/0x140
[    8.939129]  bus_for_each_drv+0x84/0xe0
[    8.939130]  __device_attach+0xb0/0x1f0
[    8.939131]  device_initial_probe+0x20/0x30
[    8.939133]  bus_probe_device+0xa4/0xb0
[    8.939134]  deferred_probe_work_func+0xc0/0x114
[    8.939135]  process_one_work+0x1e8/0x470
[    8.939138]  worker_thread+0x7c/0x424
[    8.939139]  kthread+0x100/0x110
[    8.939141]  ret_from_fork+0x10/0x20
[    8.939143] ---[ end trace 0000000000000000 ]---
[    8.974747] mhi mhi0: Wait for device to enter SBL or Mission mode
[    9.083206] Console: switching to colour frame buffer device 240x75
[    9.103788] msm_dpu ae01000.mdp: [drm] fb0: msmdrmfb frame buffer device
[    9.214472] usb 2-1: USB disconnect, device number 2
[    9.214936] r8152 2-1:1.0 enx9cebe853f578: Stop submitting intr, status -108
[    9.606238] ath11k_pci 0006:01:00.0: overriding board_id (8c)
[    9.606246] ath11k_pci 0006:01:00.0: chip_id 0x2 chip_family 0xb board_id 0xff soc_id 0x400c0210
[    9.606247] ath11k_pci 0006:01:00.0: fw_version 0x11090c35 fw_build_timestamp 2022-04-18 20:23 fw_build_id WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
[    9.730774] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd
[    9.753506] usb 2-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[    9.753513] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    9.753515] usb 2-1: Product: USB 10/100/1000 LAN
[    9.753517] usb 2-1: Manufacturer: Realtek
[    9.753518] usb 2-1: SerialNumber: 000001000000
[    9.936981] ath11k_pci 0006:01:00.0 wlP6p1s0: renamed from wlan0
[    9.967594] usb 2-1: reset SuperSpeed USB device number 3 using xhci-hcd
[   10.009074] r8152 2-1:1.0: Direct firmware load for rtl_nic/rtl8153a-3.fw failed with error -2
[   10.009090] r8152 2-1:1.0: unable to load firmware patch rtl_nic/rtl8153a-3.fw (-2)
[   10.068246] r8152 2-1:1.0 eth0: v1.12.13
[   10.113788] r8152 2-1:1.0 enx9cebe853f578: renamed from eth0
[   10.321836] rfkill: input handler disabled
[   12.947072] IPv6: ADDRCONF(NETDEV_CHANGE): enx9cebe853f578: link becomes ready
[   12.947503] r8152 2-1:1.0 enx9cebe853f578: carrier on
[   17.242883] rfkill: input handler enabled
[   18.182261] rfkill: input handler disabled
[   24.864918] FS-Cache: Loaded
[   24.885173] nfs4: Deprecated parameter 'intr'
[   24.888105] Key type dns_resolver registered
[   24.992200] NFS: Registering the id_resolver key type
[   24.992214] Key type id_resolver registered
[   24.992216] Key type id_legacy registered
[   25.008423] nfs4: Deprecated parameter 'intr'