gistfile1.txt

[38310.144242] usb 4-1: new SuperSpeed USB device number 3 using xhci-hcd
[38310.163873] usb 4-1: New USB device found, idVendor=152d, idProduct=0562, bcdDevice= 2.09
[38310.163880] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[38310.163882] usb 4-1: Product: SSK Storage
[38310.163885] usb 4-1: Manufacturer: SSK
[38310.163887] usb 4-1: SerialNumber: DD564198838B8
[38310.166211] scsi host1: uas
[38310.166832] scsi 1:0:0:0: Direct-Access     SSK                       0209 PQ: 0 ANSI: 6
[38310.168426] scsi 1:0:0:0: Attached scsi generic sg0 type 0
[38312.139312] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[38312.139320] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[38312.139802] sd 1:0:0:0: [sdb] Write Protect is off
[38312.139804] sd 1:0:0:0: [sdb] Mode Sense: 5f 00 00 08
[38312.140010] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[38312.140181] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[38312.140182] sd 1:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[38312.456404]  sdb: sdb1
[38312.457102] sd 1:0:0:0: [sdb] Attached SCSI disk
[38313.341985] usb 4-1: USB disconnect, device number 3
[38313.395488] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[38313.647507] sd 1:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK