PowerShell Prompt

profile.ps1

#Requires -Version 7

# Version 1.2.13

# check if newer version
$gistUrl = "https://api.github.com/gists/a208d2bd924691bae7ec7904cab0bd8e"
$latestVersionFile = [System.IO.Path]::Combine("$HOME",'.latest_profile_version')
$versionRegEx = "# Version (?<version>\d+\.\d+\.\d+)"

if ([System.IO.File]::Exists($latestVersionFile)) {
  $latestVersion = [System.IO.File]::ReadAllText($latestVersionFile)
  $currentProfile = [System.IO.File]::ReadAllText($profile)
  [version]$currentVersion = "0.0.0"
  if ($currentProfile -match $versionRegEx) {
    $currentVersion = $matches.Version
  }

  if ([version]$latestVersion -gt $currentVersion) {
    Write-Verbose "Your version: $currentVersion" -Verbose
    Write-Verbose "New version: $latestVersion" -Verbose
    $choice = Read-Host -Prompt "Found newer profile, install? (Y)"
    if ($choice -eq "Y" -or $choice -eq "") {
      try {
        $gist = Invoke-RestMethod $gistUrl -ErrorAction Stop
        $gistProfile = $gist.Files."profile.ps1".Content
        Set-Content -Path $profile -Value $gistProfile
        Write-Verbose "Installed newer version of profile" -Verbose
        . $profile
        return
      }
      catch {
        # we can hit rate limit issue with GitHub since we're using anonymous
        Write-Verbose -Verbose "Was not able to access gist, try again next time"
      }
    }
  }
}

$global:profile_initialized = $false

function prompt {

  function Initialize-Profile {

    $null = Start-ThreadJob -Name "Get version of `$profile from gist" -ArgumentList $gistUrl, $latestVersionFile, $versionRegEx -ScriptBlock {
      param ($gistUrl, $latestVersionFile, $versionRegEx)

      try {
        $gist = Invoke-RestMethod $gistUrl -ErrorAction Stop

        $gistProfile = $gist.Files."profile.ps1".Content
        [version]$gistVersion = "0.0.0"
        if ($gistProfile -match $versionRegEx) {
          $gistVersion = $matches.Version
          Set-Content -Path $latestVersionFile -Value $gistVersion
        }
      }
      catch {
        # we can hit rate limit issue with GitHub since we're using anonymous
        Write-Verbose -Verbose "Was not able to access gist to check for newer version"
      }
    }

    if ((Get-Module PSReadLine).Version -lt 2.2) {
      throw "Profile requires PSReadLine 2.2+"
    }

    # setup psdrives
    if ([System.IO.File]::Exists([System.IO.Path]::Combine("$HOME",'test'))) {
      New-PSDrive -Root ~/test -Name Test -PSProvider FileSystem -ErrorAction Ignore > $Null
    }

    if (!(Test-Path repos:)) {
      if (Test-Path ([System.IO.Path]::Combine("$HOME",'git'))) {
        New-PSDrive -Root ~/repos -Name git -PSProvider FileSystem > $Null
      }
      elseif (Test-Path "d:\PowerShell") {
        New-PSDrive -Root D:\ -Name git -PSProvider FileSystem > $Null
      }
    }

    Set-PSReadLineOption -Colors @{ Selection = "`e[92;7m"; InLinePrediction = "`e[2m" } -PredictionSource HistoryAndPlugin
    Set-PSReadLineKeyHandler -Chord Shift+Tab -Function MenuComplete
    Set-PSReadLineKeyHandler -Chord Ctrl+b -Function BackwardWord
    Set-PSReadLineKeyHandler -Chord Ctrl+f -Function ForwardWord
    Set-PSReadLineKeyHandler -Chord F2 -Function SwitchPredictionView

    if ($IsWindows) {
      Set-PSReadLineOption -EditMode Emacs -ShowToolTips
      Set-PSReadLineKeyHandler -Chord Ctrl+Shift+c -Function Copy
      Set-PSReadLineKeyHandler -Chord Ctrl+Shift+v -Function Paste
    }
    else {
      try {
        Import-PSUnixTabCompletion
      }
      catch [System.Management.Automation.CommandNotFoundException]
      {
        Install-Module Microsoft.PowerShell.UnixTabCompletion -Repository PSGallery -AcceptLicense -Force
        Import-PSUnixTabCompletion
      }
    }

    # add path to dotnet global tools
    $env:PATH += [System.IO.Path]::PathSeparator + [System.IO.Path]::Combine("$HOME",'.dotnet','tools')

    # ensure dotnet cli is in path
    $dotnet = Get-Command dotnet -CommandType Application -ErrorAction Ignore
    if ($null -eq $dotnet) {
      if ([System.IO.File]::Exists("$HOME/.dotnet/dotnet")){
        $env:PATH += [System.IO.Path]::PathSeparator+ [System.IO.Path]::Combine("$HOME",'.dotnet')
      }
    }
  }

  if ($global:profile_initialized -ne $true) {
    $global:profile_initialized = $true
    Initialize-Profile
  }

  $currentLastExitCode = $LASTEXITCODE
  $lastSuccess = $?

  $color = @{
    Reset = "`e[0m"
    Red = "`e[31;1m"
    Green = "`e[32;1m"
    Yellow = "`e[33;1m"
    Grey = "`e[37;0m"
    White = "`e[37;1m"
    Invert = "`e[7m"
    RedBackground = "`e[41m"
  }

  # set color of PS based on success of last execution
  if ($lastSuccess -eq $false) {
    $lastExit = $color.Red
  } else {
    $lastExit = $color.Green
  }


  # get the execution time of the last command
  $lastCmdTime = ""
  $lastCmd = Get-History -Count 1
  if ($null -ne $lastCmd) {
    $cmdTime = $lastCmd.Duration.TotalMilliseconds
    $units = "ms"
    $timeColor = $color.Green
    if ($cmdTime -gt 250 -and $cmdTime -lt 1000) {
      $timeColor = $color.Yellow
    } elseif ($cmdTime -ge 1000) {
      $timeColor = $color.Red
      $units = "s"
      $cmdTime = $lastCmd.Duration.TotalSeconds
      if ($cmdTime -ge 60) {
        $units = "m"
        $cmdTIme = $lastCmd.Duration.TotalMinutes
      }
    }

    $lastCmdTime = "$($color.Grey)[$timeColor$($cmdTime.ToString("#.##"))$units$($color.Grey)]$($color.Reset) "
  }

  # get git branch information if in a git folder or subfolder
  $gitBranch = ""
  $path = Get-Location
  while ($path -ne "") {
    if (Test-Path ([System.IO.Path]::Combine($path,'.git'))) {
      # need to do this so the stderr doesn't show up in $error
      $ErrorActionPreferenceOld = $ErrorActionPreference
      $ErrorActionPreference = 'Ignore'
      $branch = git rev-parse --abbrev-ref --symbolic-full-name '@{u}'
      $ErrorActionPreference = $ErrorActionPreferenceOld

      # handle case where branch is local
      if ($lastexitcode -ne 0 -or $null -eq $branch) {
        $branch = git rev-parse --abbrev-ref HEAD
      }

      $branchColor = $color.Green

      if ($branch -match "/master") {
        $branchColor = $color.Red
      }
      $gitBranch = " $($color.Grey)[$branchColor$branch$($color.Grey)]$($color.Reset)"
      break
    }

    $path = Split-Path -Path $path -Parent
  }

  # truncate the current location if too long
  $currentDirectory = $executionContext.SessionState.Path.CurrentLocation.Path
  $consoleWidth = [Console]::WindowWidth
  $maxPath = [int]($consoleWidth / 2)
  if ($currentDirectory.Length -gt $maxPath) {
    $currentDirectory = "`u{2026}" + $currentDirectory.SubString($currentDirectory.Length - $maxPath)
  }

  # check if running dev built pwsh
  $devBuild = ''
  if ($PSHOME.Contains("publish")) {
    $devBuild = " $($color.White)$($color.RedBackground)DevPwsh$($color.Reset)"
  }

  "${lastCmdTime}${currentDirectory}${gitBranch}${devBuild}`n${lastExit}PS$($color.Reset)$('>' * ($nestedPromptLevel + 1)) "

  # set window title
  try {
    $prefix = ''
    if ($isWindows) {
      $identity = [System.Security.Principal.WindowsIdentity]::GetCurrent()
      $windowsPrincipal = [Security.Principal.WindowsPrincipal]::new($identity)
      if ($windowsPrincipal.IsInRole("Administrators") -eq 1) {
        $prefix = "Admin:"
      }
    }

    $Host.ui.RawUI.WindowTitle = "$prefix$PWD"
  } catch {
    # do nothing if can't be set
  }

  $global:LASTEXITCODE = $currentLastExitCode
}

@BigHoss , did you ever figure it out?

You would just add those options to the top of the script. The potential issue is that oh-my-posh modifies the function:\prompt so your theme would be overridden with the next declaration of function. You would have to put the code from Steve's prompt' function in the Set-PoshContext` function.

@BigHoss I would recommend you delete the first part of the code and create ur own profile

to delete :

check if newer version
$gistUrl = "https://api.github.com/gists/a208d2bd924691bae7ec7904cab0bd8e"
$latestVersionFile = [System.IO.Path]::Combine("$HOME",'.latest_profile_version')
$versionRegEx = "# Version (?\d+.\d+.\d+)"

to create own profile(open with ur edit code):
exemple with vscode

. code $PROFILE.CurrentUserCurrentHost

and add inside:

. $env:USERPROFILE\FOLDERYOUDIRECTORYOFUSER\YOUPROFILE.ps1

ex:

. $env:USERPROFILE\.config\user_profile.ps1

and in your "YOUPROFILE.ps1" add the rest of the code, without the part I said not to put with "Module" and "theme", remembering that it is necessary to install the modules first.

my github with code:

My powershell with my theme

Did this work for you without adding -Scope Global?

New-PSDrive -Root ~/repos -Name git -PSProvider FileSystem

In my setup, I had to change the scope in order to see the mapped PSDrives.

I'm confused as to why there are no Import-Module statements. Don't you have modules from the gallery that you've installed? How do you handle these imports?

I'm confused as to why there are no Import-Module statements. Don't you have modules from the gallery that you've installed? How do you handle these imports?

Modules are implicitly loaded when you call the command. Looking briefly at this code it doesn’t appear there are any super custom modules.