Skip to content

Instantly share code, notes, and snippets.

@SukkoPera

SukkoPera/CommodoreCollection.md

Last active December 28, 2020 18:38
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save SukkoPera/f71dfc4ad6f4d2cf46de6fd048bdaef6 to your computer and use it in GitHub Desktop.
Save SukkoPera/f71dfc4ad6f4d2cf46de6fd048bdaef6 to your computer and use it in GitHub Desktop.
Download ZIP
My Commodore Collection
Raw
CommodoreCollection.md

A1000

  • A1000 NTSC Rev.6 (probably, very first model) S/N XM1101618, 220V power supply, 256K RAM Expansion, keyboard UK layout

A500

  • A500 Rev.3 512K chip + 512K slow, Space Invaders Keyboard (IT Layout), Chicken Lips Case, Kickstart 1.2, red power led, power supply (not sure if original), mouse (not sure if original), feet replaced with used original A500 ones, some shielding tabs broken
  • A500 Rev.3 S/N 150860, 512K chip + 1 MB slow (PeteAU expansion), Space Invaders Keyboard (US Layout), Chicken Lips Case (damaged in trapdoor area), Kickstart 1.3, red power led, drive probably replaced, feet replaced with new ones, expansion connector shielding + screws replaced, one case screw + one drive screw missing/replaced
  • A500 Rev.5 S/N 025875, 1 MB Chip + 1 MB Slow (PeteAU expansion), Chicken Lips Case (with a hole top rear, one over expansion slot and one bottom rear for KS switcher - to be checked), Kickstart 1.3 + 2.04 (with old-style KS Switcher), red power led, mouse/PS to be checked, top shield missing (but has expansion connector shielding), original box (no polys) + rigid plastic cover (with minor damage), video power caps/resistors replaced, Video Hybrid socketed, some other chips socketed, some wire links
  • A500 Rev.? 512K chip + 512K slow, unopened (seals intact), Kickstart 1.3, very similar to the original A500 I had back in the day, mouse/PS to be checked
  • A500 Rev.6A S/N 13371771 MB Chip + 1.5 MB Slow (PeteAU expansion), OpenAmigaDriveSwitcher, power supply (case fixed, to be checked as seems to put 220V on the outputs!), trapdoor cover painted black, drive recapped Oct 2019, drive button screwed on, keyboard very yellowd

A2000

  • A2000 S/N 107203 Rev.6.2 2 MB Chip (with Megachip from 8 Bit Dreams), 2 NEC drives, mouse, keyboard (trace repaired), RTC battery removed and replaced with CR2032 holder (+ diode), keyboard UK layout

TODO:

A500+

  • A500+ 2 MB Chip (PeteAU expansion), battery removed, some chips socketed, some replaced (U11/U13 IIRC), had lots of tracks broken by battery leakage, all repaired with wire (not pretty but works very well), power supply, DIY drive switcher installed, hole on back of case for switch
  • A500+, battery removed, UNSTABLE (Garbled graphics every once in a while)
  • A500+ S/N 598906, 2 MB Chip (PeteAU expansion), salvaged mainboard (from Ireland) populated with chips from UK and CPU from China, put in A500 case (from Livorno) with UK-layout red-led keyboard (from Brescia), RTC socketed (minor trace damage repaired), missing drive, OpenAmigaDriveSwitcher, screws from Spain (AmigaStore)
  • A500+ salvaged mainboard (from Livorno), almost all chips socketed, RAM replaced

A3000

  • A3000 S/N 10108 25 MHz + 68882 FPU, 2 MB Chip + 16 MB Fast on mainboard (16 x Toshiba TC514402AZ-80 + 16 x TC514402AZ-60: these static-column ZIP-Rams give the maximum speed a stock Amiga 3000 is capable of. With normal fast-page-mode ZIPs a speed-value of 0.92 is maximum is SysTest, these yield 1.02. Of course chips support fast-page-mode as well) + 2 MB on A2058 (to be removed) 16 GB UltraSCSI hard disk (with 68-to-50-pin Adapter), missing hard disk plate.

A600

  • A600 Rev 1.5 S/N 019081, 2 MB chip (hacked expansion with PCI slot connector), 8 MB fast, 1.5 MB slow (A6095) + SD 4 GB (updated to DanyPPC's image 2019-12), quite yellowed, mouse, power supply, has bottom case cut on left side (probably for letting an IDE cable out), another hole near mouse port, most closing hooks broken, keyboard ribbon damaged (F8, -, [ and @ might not work, now tentatively repaired "until it lasts"), ROM replaced with licensed KS 3.1, keyboard UK layout
  • A600 Rev 1.5 S/N M032105, 680EC020 CPU @ 33Mhz, MC68882 FPU @ 40Mhz, 8 MB fast, 1.5 MB slow (Furia EC020), power supply with replaced plug, most hooks intact, MicroSD adapter with 32 GB SD (Dany 12/20 Image), HD Led seems not working - TO BE RECAPPED ASAP!
  • A600HD Rev 1.5, HD 43 MB, some yellowing, brick power supply, feet replaced with new ones, audio circuit repaired, hard disk does not spin up sometimes (just hit it in case), most hooks intact
  • Extra A600 Rev.1.5 mainboard, has XU1, caps removed leaving a lot of broken pads, only fixed those crucial for working with RGB output, thus modulator and composite jack removed and "fully" recapped, repaired broken trace in audio circuit under Q331

TODO: Install OpenA600RamExpansion in all of the above, also add 4/8 GB SD where missing

A1200

  • A1200 Rev.1D.4, recovered mainboard mounted in recovered case, timing fixed, keyboard connector replaced, no drive, has minor repair for Video Connector power - NOT WORKING ATM
  • A1200 Rev.1D.4, screw holes refilled with hot glue, top shield missing, drive holder missing, drive probably replaced, keyboard UK layout, timing fixed
  • A1200 Rev.2B, very yellowed, internal drive screw replaced with bigger one but mostly pristine inside otherwise, power supply from A600, compatible Manhattan mouse (does not move vertically)
  • A1200 Rev.2B + ACA1221EC, new transparent Kickstarter case, top shield missing, keyboard TBD, drive from A600, timing fixed, lower Kickstart ROM socket cut for trace repair

TODO:

CD32

  • CD32, recapped, no power supply, no controllers
  • CD32 S/N 8513993365158001055345 from Germany, probably not recapped, 8 MB FAST RAM + IDE (TerribleFire 328), Kipper2K Riser, CF Adapter + 8 GB CF, power supply with UK plug (got separately from Denmark), no controllers

VIC20

  • VIC20, power supply
  • VIC20, bad image

C64

  • Breadbin, very old, kernal replaced with standard ROM + JiffyDOS, Open2327Adapter, 2 holes on back of case (1 used for reset button), hole on right side for kernal switch has some issues (blue screen at power on, but works fine if a cart is inserted and removed ?!?), OpenC64Saver fat, all latches broken somehow repaired with 3d prints
  • Breadbin, blurry video output
  • C64C, minor case damage, power supply
  • Early C64C (keyboard graphic symbols on top), minus key replaced, boxed (box has some wear)
  • C64G, power supply
  • C64G, power supply
  • ... (should have 11-12 in total)
  • Breadbin, all chips socketed, some replaced, still has issues, case with minor damage temporarily donated to U64 below
  • Ultimate64 rev. 1.0 (to be checked)
  • TheC64 Mini

C16

  • My original C16, CPU replaced, internal 64k mod, heatsinks, currently UNSTABLE
  • C16, power supply, RF cable, PLA replaced, boxed
  • C16, some case wear, CPU replaced with 6510, TED replaced
  • C16, CPU replaced with 6510???
  • C16???

Plus/4

  • Plus/4, power supply
  • Plus/4, power supply (makes strange noise after a while, cap might need replacing)

C128

(See this about C128 keymaps)

  • S/N 223727, Italian keyboard, no power supply
  • S/N ??????, C128 mode not working, no power supply
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment