Created
January 22, 2018 09:30
-
-
Save T-X/1a54631b96e6fd1f32b34cabf61e4f6d to your computer and use it in GitHub Desktop.
Tried against a 4.15-rc8 kernel, meson8b-odroidc1.dts+mmc crashes. Removing the card detection and replacing it with the "non-removable" attribute (meson8b-odroidc1.dts+mmc+nonremovable) works without crashes.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/* | |
* Copyright 2015 Endless Mobile, Inc. | |
* Author: Carlo Caione <carlo@endlessm.com> | |
* | |
* This file is dual-licensed: you can use it either under the terms | |
* of the GPL or the X11 license, at your option. Note that this dual | |
* licensing only applies to this file, and not this project as a | |
* whole. | |
* | |
* a) This library is free software; you can redistribute it and/or | |
* modify it under the terms of the GNU General Public License as | |
* published by the Free Software Foundation; either version 2 of the | |
* License, or (at your option) any later version. | |
* | |
* This library is distributed in the hope that it will be useful, | |
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
* GNU General Public License for more details. | |
* | |
* You should have received a copy of the GNU General Public License | |
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |
* | |
* Or, alternatively, | |
* | |
* b) Permission is hereby granted, free of charge, to any person | |
* obtaining a copy of this software and associated documentation | |
* files (the "Software"), to deal in the Software without | |
* restriction, including without limitation the rights to use, | |
* copy, modify, merge, publish, distribute, sublicense, and/or | |
* sell copies of the Software, and to permit persons to whom the | |
* Software is furnished to do so, subject to the following | |
* conditions: | |
* | |
* The above copyright notice and this permission notice shall be | |
* included in all copies or substantial portions of the Software. | |
* | |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
* OTHER DEALINGS IN THE SOFTWARE. | |
*/ | |
/dts-v1/; | |
#include "meson8b.dtsi" | |
#include <dt-bindings/gpio/gpio.h> | |
/ { | |
model = "Hardkernel ODROID-C1"; | |
compatible = "hardkernel,odroid-c1", "amlogic,meson8b"; | |
aliases { | |
serial0 = &uart_AO; | |
mmc0 = &sd_card_slot; | |
}; | |
memory { | |
reg = <0x40000000 0x40000000>; | |
}; | |
leds { | |
compatible = "gpio-leds"; | |
blue { | |
label = "c1:blue:alive"; | |
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; | |
linux,default-trigger = "heartbeat"; | |
default-state = "off"; | |
}; | |
}; | |
tflash_vdd: regulator-tflash_vdd { | |
/* | |
* signal name from schematics: TFLASH_VDD_EN | |
*/ | |
compatible = "regulator-fixed"; | |
regulator-name = "TFLASH_VDD"; | |
regulator-min-microvolt = <3300000>; | |
regulator-max-microvolt = <3300000>; | |
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; | |
enable-active-high; | |
}; | |
tf_io: gpio-regulator-tf_io { | |
compatible = "regulator-gpio"; | |
regulator-name = "TF_IO"; | |
regulator-min-microvolt = <1800000>; | |
regulator-max-microvolt = <3300000>; | |
/* | |
* signal name from schematics: TF_3V3N_1V8_EN | |
*/ | |
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; | |
gpios-states = <0>; | |
states = <3300000 0 | |
1800000 1>; | |
}; | |
}; | |
&uart_AO { | |
status = "okay"; | |
pinctrl-0 = <&uart_ao_a_pins>; | |
pinctrl-names = "default"; | |
}; | |
&gpio_ao { | |
/* | |
* WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal | |
* to be turned high in order to be detected by the USB Controller. | |
* This signal should be handled by a USB specific power sequence | |
* in order to reset the Hub when USB bus is powered down. | |
*/ | |
usb-hub { | |
gpio-hog; | |
gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; | |
output-high; | |
line-name = "usb-hub-reset"; | |
}; | |
}; | |
&usb1_phy { | |
status = "okay"; | |
}; | |
&usb1 { | |
status = "okay"; | |
}; | |
&sdio { | |
status = "okay"; | |
pinctrl-0 = <&sd_b_pins>; | |
pinctrl-names = "default"; | |
/* SD card */ | |
sd_card_slot: slot@1 { | |
compatible = "mmc-slot"; | |
reg = <1>; | |
status = "okay"; | |
bus-width = <4>; | |
no-sdio; | |
cap-mmc-highspeed; | |
cap-sd-highspeed; | |
disable-wp; | |
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; | |
cd-inverted; | |
vmmc-supply = <&tflash_vdd>; | |
vqmmc-supply = <&tf_io>; | |
}; | |
}; | |
ðmac { | |
status = "okay"; | |
snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; | |
snps,reset-active-low; | |
snps,reset-delays-us = <0 10000 30000>; | |
pinctrl-0 = <ð_rgmii_pins>; | |
pinctrl-names = "default"; | |
phy-mode = "rgmii"; | |
phy-handle = <ð_phy>; | |
amlogic,tx-delay-ns = <4>; | |
mdio { | |
compatible = "snps,dwmac-mdio"; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
/* Realtek RTL8211F (0x001cc916) */ | |
eth_phy: ethernet-phy@0 { | |
reg = <0>; | |
eee-broken-1000t; | |
interrupt-parent = <&gpio_intc>; | |
/* GPIOH_3 */ | |
interrupts = <17 IRQ_TYPE_LEVEL_LOW>; | |
}; | |
}; | |
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/* | |
* Copyright 2015 Endless Mobile, Inc. | |
* Author: Carlo Caione <carlo@endlessm.com> | |
* | |
* This file is dual-licensed: you can use it either under the terms | |
* of the GPL or the X11 license, at your option. Note that this dual | |
* licensing only applies to this file, and not this project as a | |
* whole. | |
* | |
* a) This library is free software; you can redistribute it and/or | |
* modify it under the terms of the GNU General Public License as | |
* published by the Free Software Foundation; either version 2 of the | |
* License, or (at your option) any later version. | |
* | |
* This library is distributed in the hope that it will be useful, | |
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
* GNU General Public License for more details. | |
* | |
* You should have received a copy of the GNU General Public License | |
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |
* | |
* Or, alternatively, | |
* | |
* b) Permission is hereby granted, free of charge, to any person | |
* obtaining a copy of this software and associated documentation | |
* files (the "Software"), to deal in the Software without | |
* restriction, including without limitation the rights to use, | |
* copy, modify, merge, publish, distribute, sublicense, and/or | |
* sell copies of the Software, and to permit persons to whom the | |
* Software is furnished to do so, subject to the following | |
* conditions: | |
* | |
* The above copyright notice and this permission notice shall be | |
* included in all copies or substantial portions of the Software. | |
* | |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
* OTHER DEALINGS IN THE SOFTWARE. | |
*/ | |
/dts-v1/; | |
#include "meson8b.dtsi" | |
#include <dt-bindings/gpio/gpio.h> | |
/ { | |
model = "Hardkernel ODROID-C1"; | |
compatible = "hardkernel,odroid-c1", "amlogic,meson8b"; | |
aliases { | |
serial0 = &uart_AO; | |
mmc0 = &sd_card_slot; | |
}; | |
memory { | |
reg = <0x40000000 0x40000000>; | |
}; | |
leds { | |
compatible = "gpio-leds"; | |
blue { | |
label = "c1:blue:alive"; | |
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; | |
linux,default-trigger = "heartbeat"; | |
default-state = "off"; | |
}; | |
}; | |
tflash_vdd: regulator-tflash_vdd { | |
/* | |
* signal name from schematics: TFLASH_VDD_EN | |
*/ | |
compatible = "regulator-fixed"; | |
regulator-name = "TFLASH_VDD"; | |
regulator-min-microvolt = <3300000>; | |
regulator-max-microvolt = <3300000>; | |
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; | |
enable-active-high; | |
}; | |
tf_io: gpio-regulator-tf_io { | |
compatible = "regulator-gpio"; | |
regulator-name = "TF_IO"; | |
regulator-min-microvolt = <1800000>; | |
regulator-max-microvolt = <3300000>; | |
/* | |
* signal name from schematics: TF_3V3N_1V8_EN | |
*/ | |
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; | |
gpios-states = <0>; | |
states = <3300000 0 | |
1800000 1>; | |
}; | |
}; | |
&uart_AO { | |
status = "okay"; | |
pinctrl-0 = <&uart_ao_a_pins>; | |
pinctrl-names = "default"; | |
}; | |
&gpio_ao { | |
/* | |
* WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal | |
* to be turned high in order to be detected by the USB Controller. | |
* This signal should be handled by a USB specific power sequence | |
* in order to reset the Hub when USB bus is powered down. | |
*/ | |
usb-hub { | |
gpio-hog; | |
gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; | |
output-high; | |
line-name = "usb-hub-reset"; | |
}; | |
}; | |
&usb1_phy { | |
status = "okay"; | |
}; | |
&usb1 { | |
status = "okay"; | |
}; | |
&sdio { | |
status = "okay"; | |
pinctrl-0 = <&sd_b_pins>; | |
pinctrl-names = "default"; | |
/* SD card */ | |
sd_card_slot: slot@1 { | |
compatible = "mmc-slot"; | |
reg = <1>; | |
status = "okay"; | |
bus-width = <4>; | |
no-sdio; | |
cap-mmc-highspeed; | |
cap-sd-highspeed; | |
disable-wp; | |
non-removable; | |
vmmc-supply = <&tflash_vdd>; | |
vqmmc-supply = <&tf_io>; | |
}; | |
}; | |
ðmac { | |
status = "okay"; | |
snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; | |
snps,reset-active-low; | |
snps,reset-delays-us = <0 10000 30000>; | |
pinctrl-0 = <ð_rgmii_pins>; | |
pinctrl-names = "default"; | |
phy-mode = "rgmii"; | |
phy-handle = <ð_phy>; | |
amlogic,tx-delay-ns = <4>; | |
mdio { | |
compatible = "snps,dwmac-mdio"; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
/* Realtek RTL8211F (0x001cc916) */ | |
eth_phy: ethernet-phy@0 { | |
reg = <0>; | |
eee-broken-1000t; | |
interrupt-parent = <&gpio_intc>; | |
/* GPIOH_3 */ | |
interrupts = <17 IRQ_TYPE_LEVEL_LOW>; | |
}; | |
}; | |
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/* | |
* Copyright 2015 Endless Mobile, Inc. | |
* Author: Carlo Caione <carlo@endlessm.com> | |
* | |
* This file is dual-licensed: you can use it either under the terms | |
* of the GPL or the X11 license, at your option. Note that this dual | |
* licensing only applies to this file, and not this project as a | |
* whole. | |
* | |
* a) This library is free software; you can redistribute it and/or | |
* modify it under the terms of the GNU General Public License as | |
* published by the Free Software Foundation; either version 2 of the | |
* License, or (at your option) any later version. | |
* | |
* This library is distributed in the hope that it will be useful, | |
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
* GNU General Public License for more details. | |
* | |
* You should have received a copy of the GNU General Public License | |
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |
* | |
* Or, alternatively, | |
* | |
* b) Permission is hereby granted, free of charge, to any person | |
* obtaining a copy of this software and associated documentation | |
* files (the "Software"), to deal in the Software without | |
* restriction, including without limitation the rights to use, | |
* copy, modify, merge, publish, distribute, sublicense, and/or | |
* sell copies of the Software, and to permit persons to whom the | |
* Software is furnished to do so, subject to the following | |
* conditions: | |
* | |
* The above copyright notice and this permission notice shall be | |
* included in all copies or substantial portions of the Software. | |
* | |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
* OTHER DEALINGS IN THE SOFTWARE. | |
*/ | |
#include <dt-bindings/clock/meson8b-clkc.h> | |
#include <dt-bindings/gpio/meson8b-gpio.h> | |
#include <dt-bindings/reset/amlogic,meson8b-reset.h> | |
#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h> | |
#include "meson.dtsi" | |
/ { | |
cpus { | |
#address-cells = <1>; | |
#size-cells = <0>; | |
cpu@200 { | |
device_type = "cpu"; | |
compatible = "arm,cortex-a5"; | |
next-level-cache = <&L2>; | |
reg = <0x200>; | |
enable-method = "amlogic,meson8b-smp"; | |
resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; | |
}; | |
cpu@201 { | |
device_type = "cpu"; | |
compatible = "arm,cortex-a5"; | |
next-level-cache = <&L2>; | |
reg = <0x201>; | |
enable-method = "amlogic,meson8b-smp"; | |
resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; | |
}; | |
cpu@202 { | |
device_type = "cpu"; | |
compatible = "arm,cortex-a5"; | |
next-level-cache = <&L2>; | |
reg = <0x202>; | |
enable-method = "amlogic,meson8b-smp"; | |
resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; | |
}; | |
cpu@203 { | |
device_type = "cpu"; | |
compatible = "arm,cortex-a5"; | |
next-level-cache = <&L2>; | |
reg = <0x203>; | |
enable-method = "amlogic,meson8b-smp"; | |
resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; | |
}; | |
}; | |
reserved-memory { | |
#address-cells = <1>; | |
#size-cells = <1>; | |
ranges; | |
/* 2 MiB reserved for Hardware ROM Firmware? */ | |
hwrom@0 { | |
reg = <0x0 0x200000>; | |
no-map; | |
}; | |
}; | |
scu@c4300000 { | |
compatible = "arm,cortex-a5-scu"; | |
reg = <0xc4300000 0x100>; | |
}; | |
}; /* end of / */ | |
&aobus { | |
pmu: pmu@e0 { | |
compatible = "amlogic,meson8b-pmu", "syscon"; | |
reg = <0xe0 0x18>; | |
}; | |
pinctrl_aobus: pinctrl@84 { | |
compatible = "amlogic,meson8b-aobus-pinctrl"; | |
reg = <0x84 0xc>; | |
#address-cells = <1>; | |
#size-cells = <1>; | |
ranges; | |
gpio_ao: ao-bank@14 { | |
reg = <0x14 0x4>, | |
<0x2c 0x4>, | |
<0x24 0x8>; | |
reg-names = "mux", "pull", "gpio"; | |
gpio-controller; | |
#gpio-cells = <2>; | |
gpio-ranges = <&pinctrl_aobus 0 0 16>; | |
}; | |
uart_ao_a_pins: uart_ao_a { | |
mux { | |
groups = "uart_tx_ao_a", "uart_rx_ao_a"; | |
function = "uart_ao"; | |
}; | |
}; | |
}; | |
}; | |
&cbus { | |
clkc: clock-controller@4000 { | |
#clock-cells = <1>; | |
#reset-cells = <1>; | |
compatible = "amlogic,meson8b-clkc"; | |
reg = <0x8000 0x4>, <0x4000 0x460>; | |
}; | |
reset: reset-controller@4404 { | |
compatible = "amlogic,meson8b-reset"; | |
reg = <0x4404 0x20>; | |
#reset-cells = <1>; | |
}; | |
analog_top: analog-top@81a8 { | |
compatible = "amlogic,meson8b-analog-top", "syscon"; | |
reg = <0x81a8 0x14>; | |
}; | |
pwm_ef: pwm@86c0 { | |
compatible = "amlogic,meson8b-pwm"; | |
reg = <0x86c0 0x10>; | |
#pwm-cells = <3>; | |
status = "disabled"; | |
}; | |
pinctrl_cbus: pinctrl@9880 { | |
compatible = "amlogic,meson8b-cbus-pinctrl"; | |
reg = <0x9880 0x10>; | |
#address-cells = <1>; | |
#size-cells = <1>; | |
ranges; | |
gpio: banks@80b0 { | |
reg = <0x80b0 0x28>, | |
<0x80e8 0x18>, | |
<0x8120 0x18>, | |
<0x8030 0x38>; | |
reg-names = "mux", "pull", "pull-enable", "gpio"; | |
gpio-controller; | |
#gpio-cells = <2>; | |
gpio-ranges = <&pinctrl_cbus 0 0 130>; | |
}; | |
eth_rgmii_pins: eth-rgmii { | |
mux { | |
groups = "eth_tx_clk", | |
"eth_tx_en", | |
"eth_txd1_0", | |
"eth_txd1_1", | |
"eth_txd0_0", | |
"eth_txd0_1", | |
"eth_rx_clk", | |
"eth_rx_dv", | |
"eth_rxd1", | |
"eth_rxd0", | |
"eth_mdio_en", | |
"eth_mdc", | |
"eth_ref_clk", | |
"eth_txd2", | |
"eth_txd3"; | |
function = "ethernet"; | |
}; | |
}; | |
sd_b_pins: sd-b { | |
mux { | |
groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", | |
"sd_d3_b", "sd_clk_b", "sd_cmd_b"; | |
function = "sd_b"; | |
}; | |
}; | |
}; | |
}; | |
&ahb_sram { | |
smp-sram@1ff80 { | |
compatible = "amlogic,meson8b-smp-sram"; | |
reg = <0x1ff80 0x8>; | |
}; | |
}; | |
&efuse { | |
compatible = "amlogic,meson8b-efuse"; | |
clocks = <&clkc CLKID_EFUSE>; | |
clock-names = "core"; | |
}; | |
ðmac { | |
compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac"; | |
reg = <0xc9410000 0x10000 | |
0xc1108140 0x4>; | |
clocks = <&clkc CLKID_ETH>, | |
<&clkc CLKID_MPLL2>, | |
<&clkc CLKID_MPLL2>; | |
clock-names = "stmmaceth", "clkin0", "clkin1"; | |
resets = <&reset RESET_ETHERNET>; | |
reset-names = "stmmaceth"; | |
}; | |
&gpio_intc { | |
compatible = "amlogic,meson-gpio-intc", | |
"amlogic,meson8b-gpio-intc"; | |
status = "okay"; | |
}; | |
&hwrng { | |
compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; | |
clocks = <&clkc CLKID_RNG0>; | |
clock-names = "core"; | |
}; | |
&L2 { | |
arm,data-latency = <3 3 3>; | |
arm,tag-latency = <2 2 2>; | |
arm,filter-ranges = <0x100000 0xc0000000>; | |
}; | |
&pwm_ab { | |
compatible = "amlogic,meson8b-pwm"; | |
}; | |
&pwm_cd { | |
compatible = "amlogic,meson8b-pwm"; | |
}; | |
&saradc { | |
compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; | |
clocks = <&clkc CLKID_XTAL>, | |
<&clkc CLKID_SAR_ADC>, | |
<&clkc CLKID_SANA>; | |
clock-names = "clkin", "core", "sana"; | |
}; | |
&sdio { | |
compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio"; | |
clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; | |
clock-names = "core", "clkin"; | |
}; | |
&uart_AO { | |
clocks = <&clkc CLKID_CLK81>; | |
}; | |
&uart_A { | |
clocks = <&clkc CLKID_CLK81>; | |
}; | |
&uart_B { | |
clocks = <&clkc CLKID_CLK81>; | |
}; | |
&uart_C { | |
clocks = <&clkc CLKID_CLK81>; | |
}; | |
&usb0 { | |
compatible = "amlogic,meson8b-usb", "snps,dwc2"; | |
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; | |
clock-names = "otg"; | |
}; | |
&usb1 { | |
compatible = "amlogic,meson8b-usb", "snps,dwc2"; | |
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; | |
clock-names = "otg"; | |
}; | |
&usb0_phy { | |
compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy"; | |
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; | |
clock-names = "usb_general", "usb"; | |
resets = <&reset RESET_USB_OTG>; | |
}; | |
&usb1_phy { | |
compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy"; | |
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; | |
clock-names = "usb_general", "usb"; | |
resets = <&reset RESET_USB_OTG>; | |
}; | |
&wdt { | |
compatible = "amlogic,meson8b-wdt"; | |
}; |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment