Pegasus 12-inch Klipper/Mainsail - SKR Mini E3 v3.0 - 42BHH48-150K-24 Steppers - Cura - Original Titan E3Dv6-lite - 0.4mm brass nozzle

Fast-ABS (Use this!).csv

Section;Extruder;Key;Type;Value
general;0;Date;str;14/01/2023 00:11:36
general;0;Os;str;Windows 10.0.22621
general;0;Cura_Version;str;5.2.1
general;0;Profile;str;Fast-ABS (Use this!)
general;0;Quality;str;Fast
general;0;Extruder_Count;int;1
resolution;1;layer_height;float;0.2
resolution;1;layer_height_0;float;0.2
resolution;1;line_width;float;0.3
resolution;1;wall_line_width;float;0.3
resolution;1;wall_line_width_0;float;0.3
resolution;1;wall_line_width_x;float;0.3
resolution;1;skin_line_width;float;0.3
resolution;1;infill_line_width;float;0.3
resolution;1;skirt_brim_line_width;float;0.3
resolution;1;initial_layer_line_width_factor;float;100
shell;1;wall_thickness;float;0.8
shell;1;wall_line_count;int;3
shell;1;wall_transition_length;float;0.3
shell;1;wall_distribution_count;int;1
shell;1;wall_transition_angle;float;10
shell;1;wall_transition_filter_deviation;float;0.075
shell;1;wall_0_wipe_dist;float;0.15
shell;1;wall_0_inset;float;0
shell;1;optimize_wall_printing_order;bool;True
shell;1;inset_direction;enum;inside_out
shell;1;alternate_extra_perimeter;bool;True
shell;1;min_wall_line_width;float;0.255
shell;1;min_even_wall_line_width;float;0.255
shell;1;min_odd_wall_line_width;float;0.255
shell;1;fill_outline_gaps;bool;True
shell;1;min_feature_size;float;0.075
shell;1;min_bead_width;float;0.255
shell;1;xy_offset;float;0
shell;1;xy_offset_layer_0;float;0
shell;1;hole_xy_offset;float;0
shell;1;z_seam_type;enum;sharpest_corner
shell;1;z_seam_corner;enum;z_seam_corner_inner
top_bottom;1;roofing_layer_count;int;1
top_bottom;1;roofing_line_width;float;0.2
top_bottom;1;roofing_pattern;enum;lines
top_bottom;1;roofing_monotonic;bool;True
top_bottom;1;roofing_angles;[int];[ ]
top_bottom;1;top_bottom_thickness;float;0.8
top_bottom;1;top_thickness;float;0.8
top_bottom;1;top_layers;int;4
top_bottom;1;bottom_thickness;float;0.8
top_bottom;1;bottom_layers;int;4
top_bottom;1;initial_bottom_layers;int;4
top_bottom;1;top_bottom_pattern;enum;lines
top_bottom;1;top_bottom_pattern_0;enum;lines
top_bottom;1;skin_monotonic;bool;False
top_bottom;1;skin_angles;[int];[ ]
top_bottom;1;skin_no_small_gaps_heuristic;bool;False
top_bottom;1;skin_outline_count;int;1
top_bottom;1;ironing_enabled;bool;False
top_bottom;1;skin_overlap;float;5
top_bottom;1;skin_overlap_mm;float;0.015
top_bottom;1;skin_preshrink;float;0.9
top_bottom;1;top_skin_preshrink;float;0.9
top_bottom;1;bottom_skin_preshrink;float;0.9
top_bottom;1;expand_skins_expand_distance;float;0.9
top_bottom;1;top_skin_expand_distance;float;0.9
top_bottom;1;bottom_skin_expand_distance;float;0.9
top_bottom;1;max_skin_angle_for_expansion;float;90
top_bottom;1;min_skin_width_for_expansion;float;0
infill;1;infill_sparse_density;float;20
infill;1;infill_line_distance;float;2.4
infill;1;infill_pattern;enum;lightning
infill;1;infill_multiplier;int;1
infill;1;infill_wall_line_count;int;0
infill;1;infill_overlap;float;10
infill;1;infill_overlap_mm;float;0.03
infill;1;infill_wipe_dist;float;0.075
infill;1;infill_sparse_thickness;float;0.2
infill;1;infill_before_walls;bool;False
infill;1;min_infill_area;float;5
infill;1;skin_edge_support_thickness;float;0
infill;1;skin_edge_support_layers;int;0
infill;1;lightning_infill_support_angle;float;40
infill;1;lightning_infill_overhang_angle;float;40
infill;1;lightning_infill_prune_angle;float;40
infill;1;lightning_infill_straightening_angle;float;40
material;1;material_print_temperature;float;235
material;1;material_print_temperature_layer_0;float;235
material;1;material_initial_print_temperature;float;225
material;1;material_final_print_temperature;float;210
material;1;material_bed_temperature;float;100
material;1;material_bed_temperature_layer_0;float;100
material;1;material_shrinkage_percentage;float;100
material;1;material_shrinkage_percentage_xy;float;100
material;1;material_shrinkage_percentage_z;float;100
material;1;material_flow;float;100
material;1;wall_material_flow;float;100
material;1;wall_0_material_flow;float;100
material;1;wall_x_material_flow;float;100
material;1;skin_material_flow;float;100
material;1;roofing_material_flow;float;100
material;1;infill_material_flow;float;100
material;1;skirt_brim_material_flow;float;100
material;1;prime_tower_flow;float;100
material;1;material_flow_layer_0;float;100
material;1;wall_x_material_flow_layer_0;float;100
material;1;wall_0_material_flow_layer_0;float;100
material;1;skin_material_flow_layer_0;float;100
speed;1;speed_print;float;90
speed;1;speed_infill;float;70
speed;1;speed_wall;float;40
speed;1;speed_wall_0;float;50
speed;1;speed_wall_x;float;70
speed;1;speed_roofing;float;40
speed;1;speed_topbottom;float;50
speed;1;speed_travel;float;90
speed;1;speed_layer_0;float;15
speed;1;speed_print_layer_0;float;15
speed;1;speed_travel_layer_0;float;50
speed;1;skirt_brim_speed;float;15
speed;1;speed_z_hop;float;10
speed;1;speed_slowdown_layers;int;4
speed;1;speed_equalize_flow_width_factor;float;100
speed;1;acceleration_enabled;bool;True
speed;1;acceleration_travel_enabled;bool;True
speed;1;acceleration_print;float;500
speed;1;acceleration_infill;float;700
speed;1;acceleration_wall;float;500
speed;1;acceleration_wall_0;float;700
speed;1;acceleration_wall_x;float;400
speed;1;acceleration_roofing;float;500
speed;1;acceleration_topbottom;float;500
speed;1;acceleration_travel;float;700
speed;1;acceleration_layer_0;float;400
speed;1;acceleration_print_layer_0;float;400
speed;1;acceleration_travel_layer_0;float;700
speed;1;acceleration_skirt_brim;float;400
speed;1;jerk_enabled;bool;False
speed;1;slowz_enable;bool;False
travel;1;retraction_enable;bool;True
travel;1;retract_at_layer_change;bool;False
travel;1;retraction_amount;float;0.75
travel;1;retraction_speed;float;100
travel;1;retraction_retract_speed;float;100
travel;1;retraction_prime_speed;float;40
travel;1;retraction_extra_prime_amount;float;0
travel;1;retraction_min_travel;float;0.6
travel;1;retraction_count_max;int;90
travel;1;retraction_extrusion_window;float;0.75
travel;1;retraction_combing;enum;infill
travel;1;retraction_combing_max_distance;float;10
travel;1;travel_retract_before_outer_wall;bool;False
travel;1;travel_avoid_other_parts;bool;False
travel;1;layer_start_x;float;0
travel;1;layer_start_y;float;0
travel;1;retraction_hop_enabled;bool;True
travel;1;retraction_hop;float;0.2
cooling;1;cool_fan_enabled;bool;True
cooling;1;cool_fan_speed;float;70
cooling;1;cool_fan_speed_min;float;20
cooling;1;cool_fan_speed_max;float;20
cooling;1;cool_min_layer_time_fan_speed_max;float;20
cooling;1;cool_fan_speed_0;float;0
cooling;1;cool_fan_full_at_height;float;0.8
cooling;1;cool_fan_full_layer;int;4
cooling;1;cool_min_layer_time;float;15
cooling;1;cool_min_speed;float;10
cooling;1;cool_lift_head;bool;False
support;1;support_enable;bool;False
platform_adhesion;1;adhesion_type;enum;brim
platform_adhesion;1;skirt_brim_minimal_length;float;550
platform_adhesion;1;brim_width;float;8
platform_adhesion;1;brim_line_count;int;27
platform_adhesion;1;brim_gap;float;0
platform_adhesion;1;brim_outside_only;bool;True
platform_adhesion;1;adhesion_z_offset;float;-0.2
platform_adhesion;1;adhesion_z_offset_extensive_processing;bool;False
meshfix;1;meshfix_union_all;bool;True
meshfix;1;meshfix_union_all_remove_holes;bool;False
meshfix;1;meshfix_extensive_stitching;bool;False
meshfix;1;meshfix_keep_open_polygons;bool;False
meshfix;1;multiple_mesh_overlap;float;0.15
meshfix;1;carve_multiple_volumes;bool;False
meshfix;1;remove_empty_first_layers;bool;True
meshfix;1;meshfix_maximum_resolution;float;0.01
meshfix;1;meshfix_maximum_travel_resolution;float;0.01
meshfix;1;meshfix_maximum_deviation;float;0.025
meshfix;1;meshfix_maximum_extrusion_area_deviation;float;50000
blackmagic;1;print_sequence;enum;all_at_once
blackmagic;1;infill_mesh;bool;False
blackmagic;1;infill_mesh_order;int;0
blackmagic;1;cutting_mesh;bool;False
blackmagic;1;mold_enabled;bool;False
blackmagic;1;support_mesh;bool;False
blackmagic;1;anti_overhang_mesh;bool;False
blackmagic;1;magic_mesh_surface_mode;enum;normal
blackmagic;1;magic_spiralize;bool;False
blackmagic;1;relative_extrusion;bool;False
experimental;1;slicing_tolerance;enum;middle
experimental;1;infill_enable_travel_optimization;bool;True
experimental;1;minimum_polygon_circumference;float;0.2
experimental;1;draft_shield_enabled;bool;False
experimental;1;conical_overhang_enabled;bool;False
experimental;1;coasting_enable;bool;False
experimental;1;magic_fuzzy_skin_enabled;bool;False
experimental;1;flow_rate_max_extrusion_offset;float;0
experimental;1;flow_rate_extrusion_offset_factor;float;100
experimental;1;wireframe_enabled;bool;False
experimental;1;adaptive_layer_height_enabled;bool;False
experimental;1;wall_overhang_angle;float;75
experimental;1;wall_overhang_speed_factor;float;50
experimental;1;bridge_settings_enabled;bool;True
experimental;1;bridge_wall_min_length;float;2.15
experimental;1;bridge_skin_support_threshold;float;50
experimental;1;bridge_sparse_infill_max_density;float;0
experimental;1;bridge_wall_coast;float;10
experimental;1;bridge_wall_speed;float;25
experimental;1;bridge_wall_material_flow;float;50
experimental;1;bridge_skin_speed;float;25
experimental;1;bridge_skin_material_flow;float;60
experimental;1;bridge_skin_density;float;100
experimental;1;bridge_fan_speed;float;20
experimental;1;bridge_enable_more_layers;bool;True
experimental;1;bridge_skin_speed_2;float;25
experimental;1;bridge_skin_material_flow_2;float;100
experimental;1;bridge_skin_density_2;float;75
experimental;1;bridge_fan_speed_2;float;20
experimental;1;bridge_skin_speed_3;float;25
experimental;1;bridge_skin_material_flow_3;float;110
experimental;1;bridge_skin_density_3;float;80
experimental;1;bridge_fan_speed_3;float;20
experimental;1;clean_between_layers;bool;False
experimental;1;small_hole_max_size;float;0
experimental;1;small_feature_max_length;float;0
experimental;1;small_feature_speed_factor;float;50
experimental;1;small_feature_speed_factor_0;float;50
experimental;1;material_alternate_walls;bool;False

Fast-PLA (Use this!).csv

Section;Extruder;Key;Type;Value
general;0;Date;str;14/01/2023 00:11:55
general;0;Os;str;Windows 10.0.22621
general;0;Cura_Version;str;5.2.1
general;0;Profile;str;Fast-PLA (Use this!)
general;0;Quality;str;Fast
general;0;Extruder_Count;int;1
resolution;1;layer_height;float;0.2
resolution;1;layer_height_0;float;0.2
resolution;1;line_width;float;0.3
resolution;1;wall_line_width;float;0.3
resolution;1;wall_line_width_0;float;0.3
resolution;1;wall_line_width_x;float;0.3
resolution;1;skin_line_width;float;0.3
resolution;1;infill_line_width;float;0.3
resolution;1;skirt_brim_line_width;float;0.3
resolution;1;initial_layer_line_width_factor;float;100
shell;1;wall_thickness;float;0.8
shell;1;wall_line_count;int;3
shell;1;wall_transition_length;float;0.3
shell;1;wall_distribution_count;int;1
shell;1;wall_transition_angle;float;10
shell;1;wall_transition_filter_deviation;float;0.075
shell;1;wall_0_wipe_dist;float;0.15
shell;1;wall_0_inset;float;0
shell;1;optimize_wall_printing_order;bool;True
shell;1;inset_direction;enum;inside_out
shell;1;alternate_extra_perimeter;bool;True
shell;1;min_wall_line_width;float;0.255
shell;1;min_even_wall_line_width;float;0.255
shell;1;min_odd_wall_line_width;float;0.255
shell;1;fill_outline_gaps;bool;True
shell;1;min_feature_size;float;0.075
shell;1;min_bead_width;float;0.255
shell;1;xy_offset;float;0
shell;1;xy_offset_layer_0;float;0
shell;1;hole_xy_offset;float;0
shell;1;z_seam_type;enum;sharpest_corner
shell;1;z_seam_corner;enum;z_seam_corner_inner
top_bottom;1;roofing_layer_count;int;1
top_bottom;1;roofing_line_width;float;0.2
top_bottom;1;roofing_pattern;enum;lines
top_bottom;1;roofing_monotonic;bool;True
top_bottom;1;roofing_angles;[int];[ ]
top_bottom;1;top_bottom_thickness;float;0.8
top_bottom;1;top_thickness;float;0.8
top_bottom;1;top_layers;int;4
top_bottom;1;bottom_thickness;float;0.8
top_bottom;1;bottom_layers;int;4
top_bottom;1;initial_bottom_layers;int;4
top_bottom;1;top_bottom_pattern;enum;lines
top_bottom;1;top_bottom_pattern_0;enum;lines
top_bottom;1;skin_monotonic;bool;False
top_bottom;1;skin_angles;[int];[ ]
top_bottom;1;skin_no_small_gaps_heuristic;bool;False
top_bottom;1;skin_outline_count;int;1
top_bottom;1;ironing_enabled;bool;False
top_bottom;1;skin_overlap;float;5
top_bottom;1;skin_overlap_mm;float;0.015
top_bottom;1;skin_preshrink;float;0.9
top_bottom;1;top_skin_preshrink;float;0.9
top_bottom;1;bottom_skin_preshrink;float;0.9
top_bottom;1;expand_skins_expand_distance;float;0.9
top_bottom;1;top_skin_expand_distance;float;0.9
top_bottom;1;bottom_skin_expand_distance;float;0.9
top_bottom;1;max_skin_angle_for_expansion;float;90
top_bottom;1;min_skin_width_for_expansion;float;0
infill;1;infill_sparse_density;float;20
infill;1;infill_line_distance;float;2.4
infill;1;infill_pattern;enum;lightning
infill;1;infill_multiplier;int;1
infill;1;infill_wall_line_count;int;0
infill;1;infill_overlap;float;10
infill;1;infill_overlap_mm;float;0.03
infill;1;infill_wipe_dist;float;0.075
infill;1;infill_sparse_thickness;float;0.2
infill;1;infill_before_walls;bool;False
infill;1;min_infill_area;float;5
infill;1;skin_edge_support_thickness;float;0
infill;1;skin_edge_support_layers;int;0
infill;1;lightning_infill_support_angle;float;40
infill;1;lightning_infill_overhang_angle;float;40
infill;1;lightning_infill_prune_angle;float;40
infill;1;lightning_infill_straightening_angle;float;40
material;1;material_print_temperature;float;180
material;1;material_print_temperature_layer_0;float;180
material;1;material_initial_print_temperature;float;175
material;1;material_final_print_temperature;float;175
material;1;material_bed_temperature;float;70
material;1;material_bed_temperature_layer_0;float;70
material;1;material_shrinkage_percentage;float;100
material;1;material_shrinkage_percentage_xy;float;100
material;1;material_shrinkage_percentage_z;float;100
material;1;material_flow;float;100
material;1;wall_material_flow;float;100
material;1;wall_0_material_flow;float;100
material;1;wall_x_material_flow;float;100
material;1;skin_material_flow;float;100
material;1;roofing_material_flow;float;100
material;1;infill_material_flow;float;100
material;1;skirt_brim_material_flow;float;100
material;1;prime_tower_flow;float;100
material;1;material_flow_layer_0;float;100
material;1;wall_x_material_flow_layer_0;float;100
material;1;wall_0_material_flow_layer_0;float;100
material;1;skin_material_flow_layer_0;float;100
speed;1;speed_print;float;90
speed;1;speed_infill;float;70
speed;1;speed_wall;float;50
speed;1;speed_wall_0;float;50
speed;1;speed_wall_x;float;70
speed;1;speed_roofing;float;50
speed;1;speed_topbottom;float;60
speed;1;speed_travel;float;90
speed;1;speed_layer_0;float;23
speed;1;speed_print_layer_0;float;23
speed;1;speed_travel_layer_0;float;36
speed;1;skirt_brim_speed;float;23
speed;1;speed_z_hop;float;10
speed;1;speed_slowdown_layers;int;3
speed;1;speed_equalize_flow_width_factor;float;100
speed;1;acceleration_enabled;bool;True
speed;1;acceleration_travel_enabled;bool;True
speed;1;acceleration_print;float;500
speed;1;acceleration_infill;float;700
speed;1;acceleration_wall;float;500
speed;1;acceleration_wall_0;float;700
speed;1;acceleration_wall_x;float;400
speed;1;acceleration_roofing;float;500
speed;1;acceleration_topbottom;float;500
speed;1;acceleration_travel;float;700
speed;1;acceleration_layer_0;float;400
speed;1;acceleration_print_layer_0;float;400
speed;1;acceleration_travel_layer_0;float;800
speed;1;acceleration_skirt_brim;float;400
speed;1;jerk_enabled;bool;False
speed;1;slowz_enable;bool;False
travel;1;retraction_enable;bool;True
travel;1;retract_at_layer_change;bool;False
travel;1;retraction_amount;float;0.75
travel;1;retraction_speed;float;100
travel;1;retraction_retract_speed;float;100
travel;1;retraction_prime_speed;float;40
travel;1;retraction_extra_prime_amount;float;0
travel;1;retraction_min_travel;float;0.6
travel;1;retraction_count_max;int;90
travel;1;retraction_extrusion_window;float;0.75
travel;1;retraction_combing;enum;infill
travel;1;retraction_combing_max_distance;float;10
travel;1;travel_retract_before_outer_wall;bool;False
travel;1;travel_avoid_other_parts;bool;False
travel;1;layer_start_x;float;0
travel;1;layer_start_y;float;0
travel;1;retraction_hop_enabled;bool;True
travel;1;retraction_hop;float;0.2
cooling;1;cool_fan_enabled;bool;True
cooling;1;cool_fan_speed;float;100
cooling;1;cool_fan_speed_min;float;50
cooling;1;cool_fan_speed_max;float;100
cooling;1;cool_min_layer_time_fan_speed_max;float;20
cooling;1;cool_fan_speed_0;float;0
cooling;1;cool_fan_full_at_height;float;0.8
cooling;1;cool_fan_full_layer;int;4
cooling;1;cool_min_layer_time;float;15
cooling;1;cool_min_speed;float;10
cooling;1;cool_lift_head;bool;False
support;1;support_enable;bool;False
platform_adhesion;1;adhesion_type;enum;skirt
platform_adhesion;1;skirt_line_count;int;1
platform_adhesion;1;skirt_gap;float;3
platform_adhesion;1;skirt_brim_minimal_length;float;550
platform_adhesion;1;adhesion_z_offset;float;0
platform_adhesion;1;adhesion_z_offset_extensive_processing;bool;False
meshfix;1;meshfix_union_all;bool;True
meshfix;1;meshfix_union_all_remove_holes;bool;False
meshfix;1;meshfix_extensive_stitching;bool;False
meshfix;1;meshfix_keep_open_polygons;bool;False
meshfix;1;multiple_mesh_overlap;float;0.15
meshfix;1;carve_multiple_volumes;bool;False
meshfix;1;remove_empty_first_layers;bool;True
meshfix;1;meshfix_maximum_resolution;float;0.01
meshfix;1;meshfix_maximum_travel_resolution;float;0.01
meshfix;1;meshfix_maximum_deviation;float;0.025
meshfix;1;meshfix_maximum_extrusion_area_deviation;float;50000
blackmagic;1;print_sequence;enum;all_at_once
blackmagic;1;infill_mesh;bool;False
blackmagic;1;infill_mesh_order;int;0
blackmagic;1;cutting_mesh;bool;False
blackmagic;1;mold_enabled;bool;False
blackmagic;1;support_mesh;bool;False
blackmagic;1;anti_overhang_mesh;bool;False
blackmagic;1;magic_mesh_surface_mode;enum;normal
blackmagic;1;magic_spiralize;bool;False
blackmagic;1;relative_extrusion;bool;False
experimental;1;slicing_tolerance;enum;middle
experimental;1;infill_enable_travel_optimization;bool;True
experimental;1;minimum_polygon_circumference;float;0.2
experimental;1;draft_shield_enabled;bool;False
experimental;1;conical_overhang_enabled;bool;False
experimental;1;coasting_enable;bool;False
experimental;1;magic_fuzzy_skin_enabled;bool;False
experimental;1;flow_rate_max_extrusion_offset;float;0
experimental;1;flow_rate_extrusion_offset_factor;float;100
experimental;1;wireframe_enabled;bool;False
experimental;1;adaptive_layer_height_enabled;bool;False
experimental;1;wall_overhang_angle;float;75
experimental;1;wall_overhang_speed_factor;float;50
experimental;1;bridge_settings_enabled;bool;True
experimental;1;bridge_wall_min_length;float;2.15
experimental;1;bridge_skin_support_threshold;float;50
experimental;1;bridge_sparse_infill_max_density;float;0
experimental;1;bridge_wall_coast;float;10
experimental;1;bridge_wall_speed;float;25
experimental;1;bridge_wall_material_flow;float;50
experimental;1;bridge_skin_speed;float;30
experimental;1;bridge_skin_material_flow;float;60
experimental;1;bridge_skin_density;float;100
experimental;1;bridge_fan_speed;float;100
experimental;1;bridge_enable_more_layers;bool;True
experimental;1;bridge_skin_speed_2;float;30
experimental;1;bridge_skin_material_flow_2;float;100
experimental;1;bridge_skin_density_2;float;75
experimental;1;bridge_fan_speed_2;float;70
experimental;1;bridge_skin_speed_3;float;30
experimental;1;bridge_skin_material_flow_3;float;110
experimental;1;bridge_skin_density_3;float;80
experimental;1;bridge_fan_speed_3;float;70
experimental;1;clean_between_layers;bool;False
experimental;1;small_hole_max_size;float;0
experimental;1;small_feature_max_length;float;0
experimental;1;small_feature_speed_factor;float;50
experimental;1;small_feature_speed_factor_0;float;50
experimental;1;material_alternate_walls;bool;False

moonraker.conf

[server]
host: 0.0.0.0
port: 7125
klippy_uds_address: /home/user/printer_data/comms/klippy.sock

[authorization]
trusted_clients:
    10.0.0.0/8
    127.0.0.0/8
    169.254.0.0/16
    172.16.0.0/12
    192.168.0.0/16
    FE80::/10
    ::1/128
cors_domains:
    http://*.lan
    http://*.local
    https://my.mainsail.xyz
    http://my.mainsail.xyz
    https://app.fluidd.xyz
    http://app.fluidd.xyz

[octoprint_compat]

[file_manager]
enable_object_processing: True

[history]

[update_manager]
channel: dev
refresh_interval: 168

[update_manager mainsail]
type: web
channel: stable
repo: mainsail-crew/mainsail
path: ~/mainsail

printer.cfg

#Custom Macros

[menu __main __offsetz]
type: input
name: Offset Z:{'%05.3f' % menu.input}
input: {printer.gcode_move.homing_origin.z}
input_min: -5
input_max: 5
input_step: 0.005
realtime: True
gcode:
    SET_GCODE_OFFSET Z={'%.3f' % menu.input} MOVE=1

[menu __main __XYEmotoff]
type: command
name: X/Y/E Mot-off
gcode:
  SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=0
  SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=0
  SET_STEPPER_ENABLE STEPPER=extruder ENABLE=0

[menu __main __inspectnozzle]
type: command
name: Inspect Nozzle
gcode:
  G28
  G90
  G1 X140 Z250 F1500

[gcode_macro M300]
gcode:
    # Use a default 1kHz tone if S is omitted.
    {% set S = params.S|default(1000)|int %}
    # Use a 10ms duration is P is omitted.
    {% set P = params.P|default(100)|int %}
    SET_PIN PIN=beeper VALUE=0.5 CYCLE_TIME={ 1.0/S if S > 0 else 1 }
    G4 P{P}
    SET_PIN PIN=beeper VALUE=0

[gcode_macro end_tune]
gcode:
    M300 S3135 P75
    M300 S3135 P150
    M300 S1760 P150
    M300 S1760 P150
    M300 S2637 P150
    M300 S2637 P150
    M300 S3135 P150

[gcode_macro _HOME_X]
gcode:
    # Always use consistent run_current on A/B steppers during sensorless homing
    {% set RUN_CURRENT_X = printer.configfile.settings['tmc2209 stepper_x'].run_current|float %}
    {% set RUN_CURRENT_Y = printer.configfile.settings['tmc2209 stepper_y'].run_current|float %}
    {% set HOME_CURRENT = 0.1 %}
    SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CURRENT}
    SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT}
    # Home
    G28.1 X
    # Move away
    G91
    G1 X10 F1200
    
    # Wait just a second… (give StallGuard registers time to clear)
    G4 P1000
    # Set current during print
    SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
    SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro _HOME_Y]
gcode:
    {% set RUN_CURRENT_X = printer.configfile.settings['tmc2209 stepper_x'].run_current|float %}
    {% set RUN_CURRENT_Y = printer.configfile.settings['tmc2209 stepper_y'].run_current|float %}
    {% set HOME_CURRENT = 0.1 %}
    SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CURRENT}
    SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT}
    # Home
    G28.1 Y
    # Move away
    G91
    G1 Y10 F1200

    # Wait just a second… (give StallGuard registers time to clear)
    G4 P1000
    # Set current during print
    SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CURRENT_X}
    SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[force_move]
enable_force_move: True

[gcode_macro  G28]
rename_existing: G28.1
gcode:
  {% set home_all = 'X' not in params and 'Y' not in params and 'Z' not in params %}

  {% if home_all or 'X' in params %}
    _HOME_X
  {% endif %}
  
  {% if home_all or 'Y' in params %}
    _HOME_Y
  {% endif %}
  
  {% if home_all or 'Z' in params %}
    G28.1 Z
    G1 Z10
  {% endif %}

[safe_z_home]
home_xy_position: 100, 100
speed: 100
z_hop: 5
z_hop_speed: 10

[include mainsail.cfg]
[menu __main __octoprint]
type: disabled

[stepper_x]
step_pin: PB13
dir_pin: PB12
enable_pin: !PB14
microsteps: 256
rotation_distance: 40
endstop_pin: tmc2209_stepper_x:virtual_endstop
position_endstop: 0
position_min: 0
position_max: 287
homing_speed: 20
homing_retract_dist: 0

[tmc2209 stepper_x]
uart_pin: PC11
tx_pin: PC10
uart_address: 0
run_current: 1
# driver_HEND: 6
# driver_HSTRT: 3
driver_SGTHRS: 40
diag_pin: ^PC0
stealthchop_threshold: 999999

[stepper_y]
step_pin: PB10
dir_pin: PB2
enable_pin: !PB11
microsteps: 256
rotation_distance: 40
endstop_pin: tmc2209_stepper_y:virtual_endstop
position_endstop: -50
position_min: -50
position_max: 273
homing_speed: 20
homing_retract_dist: 0

[tmc2209 stepper_y]
uart_pin: PC11
tx_pin: PC10
uart_address: 2
run_current: 1.1
# driver_HEND: 6
# driver_HSTRT: 3
driver_SGTHRS: 40
diag_pin: ^PC1
stealthchop_threshold: 999999

[stepper_z]
step_pin: PB0
dir_pin: PC5
enable_pin: !PB1
microsteps: 256
rotation_distance: 8
endstop_pin: probe:z_virtual_endstop
position_min: -0.9
position_max: 288
homing_speed: 10

[tmc2209 stepper_z]
uart_pin: PC11
tx_pin: PC10
uart_address: 1
run_current: 1.5
hold_current: 1.5
stealthchop_threshold: 999999

[bltouch]
sensor_pin: ^PC14
control_pin: PA1
probe_with_touch_mode: True
stow_on_each_sample: False
x_offset: 31
y_offset: 0
#z_offset: 4

[extruder]
step_pin: PB3
dir_pin: PB4
enable_pin: !PD1
microsteps: 64
rotation_distance: 7.98
nozzle_diameter: 0.400
filament_diameter: 1.750
#control: pid
#pid_Kp: 21.527
#pid_Ki: 1.063
#pid_Kd: 108.982
heater_pin: PC8
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PA0
min_temp: 0
max_temp: 248
pwm_cycle_time: 0.016
pressure_advance: 0.1

[tmc2209 extruder]
uart_pin: PC11
tx_pin: PC10
uart_address: 3
run_current: 0.6
driver_HEND: 3
driver_HSTRT: 4
stealthchop_threshold: 999999

[heater_bed]
heater_pin: PC9
sensor_type: Generic 3950
pullup_resistor: 10000
sensor_pin: PC4
#control: pid
#pid_Kp: 21.527
#pid_Ki: 1.063
#pid_Kd: 108.982
min_temp: 0
max_temp: 135
pwm_cycle_time: 0.016
# max_power: 0.8

[fan]
pin: PC7
hardware_pwm: False
cycle_time: 0.1

[heater_fan heatbreak_cooling_fan]
pin: PC6

[heater_fan controller_fan]
pin: PB15
heater: heater_bed
heater_temp: 45.0
fan_speed: 0.8

[mcu]
serial: /dev/serial/by-id/usb-Klipper_stm32g0b1xx_47000E000250415339373620-if00

[printer]
kinematics: cartesian
max_velocity: 170
max_accel: 500
max_z_velocity: 15
max_z_accel: 500

[endstop_phase]

[skew_correction]

[exclude_object]

# [input_shaper]
# shaper_freq_x: 27.53
# shaper_freq_y: 35.71
# shaper_type: mzv

# Common EXP1 / EXP2 (display) pins
[board_pins]
aliases:
    EXP1_1=PB5,  EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
    EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PD6, EXP1_10=<5V>

[display]
lcd_type: st7920
cs_pin: EXP1_1 #rs/cs pin
sclk_pin: EXP1_3 #data pin
sid_pin: EXP1_2 #enable pin
encoder_pins: ^EXP1_7, ^EXP1_8
encoder_steps_per_detent: 2
click_pin: ^!EXP1_6

[output_pin beeper]
pin: EXP1_5
pwm: True
value: 0
shutdown_value: 0
cycle_time: 0.02
scale: 4000

[virtual_sdcard]
path: /home/user/printer_data/gcodes

[idle_timeout]
timeout: 21600

# [input_shaper]
# shaper_freq_x: 34.27
# shaper_freq_y: 30.82
# shaper_type: mzv

[endstop_phase]

[bed_mesh]
speed: 150
horizontal_move_z: 7
mesh_min: 40,9
mesh_max: 248, 271
probe_count: 3,3

#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [bltouch]
#*# z_offset = 2.95
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 60.508
#*# pid_ki = 1.746
#*# pid_kd = 524.147
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 29.330
#*# pid_ki = 1.304
#*# pid_kd = 164.982
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 	-0.402500, -0.056719, 0.378281
#*# 	-0.033438, 0.108437, 0.321250
#*# 	0.182500, 0.233906, 0.328906
#*# tension = 0.2
#*# min_x = 40.0
#*# algo = lagrange
#*# y_count = 3
#*# mesh_y_pps = 2
#*# min_y = 9.0
#*# x_count = 3
#*# max_y = 271.0
#*# mesh_x_pps = 2
#*# max_x = 268.0