specification for DCPU-Thruster interface

SPECIFICATIONS FOR DCPU/THRUSTER INTERFACE DRAFT 0.01

Name: UTI0001 - Universal Thruster Interface
ID: BFEC9661, verson: 0x0001
Manufacture: 0 (n/a)

0: NO_OF_SPEEDS
   Writes the number of available speeds to the C register.
1: SET_SPEED
   Reads the B register, and attempts to set the thruster to the specified
   speed. 0 is stopped, increasing numbers are higher speeds. The unit for
   speeds is specified by the thruster and may not necessarily be linear.
   The C register is set to one of the following values:
       0x0000: speed successfully set.
       0x0001: not enough fuel.
       0x0002: speed too high for thruster.
       0x0003: unknown error.
   This does not pause the DCPU but it may take many cycles for the C register
   to be updated.
2: CURRENT_TEMP
   Write the current temperature to the C register. The unit is specified by the
   thruster.
3: RECOMMENDED_MAXIMUM_TEMPERATURE
   Write the recommended maximum temperature for operation of the thruster to
   the C register. The unit must be the same as is used for CURRENT_TEMP.