Created
October 16, 2017 23:22
-
-
Save TheCase/a8f69444e34540354444a36d4d611870 to your computer and use it in GitHub Desktop.
Slic3r bundle for Maddy Mendel Max
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # generated by Slic3r 1.2.9 on Sat May 21 11:38:50 2016 | |
| [filament:faberdashery] | |
| bed_temperature = 65 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 2 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 60 | |
| filament_colour = #000000 | |
| filament_diameter = 2.9 | |
| first_layer_bed_temperature = 65 | |
| first_layer_temperature = 165 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 160 | |
| [filament:faberdashery - fan off] | |
| bed_temperature = 65 | |
| bridge_fan_speed = 100 | |
| cooling = 0 | |
| disable_fan_first_layers = 2 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 60 | |
| filament_colour = #000000 | |
| filament_diameter = 2.9 | |
| first_layer_bed_temperature = 65 | |
| first_layer_temperature = 165 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 160 | |
| [filament:hatchbox] | |
| bed_temperature = 65 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 2 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 60 | |
| filament_colour = #000000 | |
| filament_diameter = 3.08 | |
| first_layer_bed_temperature = 65 | |
| first_layer_temperature = 165 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 162 | |
| [filament:hatchbox - fan off] | |
| bed_temperature = 65 | |
| bridge_fan_speed = 100 | |
| cooling = 0 | |
| disable_fan_first_layers = 2 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 60 | |
| filament_colour = #000000 | |
| filament_diameter = 3.08 | |
| first_layer_bed_temperature = 65 | |
| first_layer_temperature = 165 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 162 | |
| [filament:ultimachine] | |
| bed_temperature = 65 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 2 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 60 | |
| filament_colour = #000000 | |
| filament_diameter = 2.9 | |
| first_layer_bed_temperature = 65 | |
| first_layer_temperature = 165 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 160 | |
| [presets] | |
| filament = hatchbox.ini | |
| print = 3p 15if.ini | |
| printer = Maddy.ini | |
| [print:1p 15if] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 15% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 1 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 1 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 60 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:1p 15if support] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 15% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 1 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 60 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:1p 25if] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 1 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 60 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:1p 25if support] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 1 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 60 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:3p 15if] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 15% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 60 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:3p 15if - brim] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 5 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 15% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 60 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:3p 15if support] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 15% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 3 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 1 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:3p 15if support - brim] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 5 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 15% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 3 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 1 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:3p 25if] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 60 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:3p 25if support] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 60 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:spiral] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 160% | |
| fill_angle = 45 | |
| fill_density = 0% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 100% | |
| first_layer_speed = 60% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.294 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 2 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 1 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 1 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 60 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 75% | |
| top_solid_layers = 0 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [printer:Maddy] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = G91 ; use relative\nG1 X-30 Y30 Z1 F2000 ; move Y back, Z up\nG1 E-2 F100 ; retract to stop dribbles\nG90 ; use absolute\nG1 X0 Y180 F2000 ; take X/Y to zero\nM84 ; idle steppers \n\nM140 S0 ; turn off bed\nM104 S0 ; turn off tip\n\nG4 S60 ; let fan cool hot end for a while\nM106 S0 ; turn off the fan\nM81 ; kill the 12v power | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.5 | |
| pressure_advance = 0 | |
| retract_before_travel = 1 | |
| retract_layer_change = 1 | |
| retract_length = 1 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 30 | |
| start_gcode = M81 ; make sure it knows the p/s is off\nM80 ; switch on the 12v power supply\n\nG90 ; use absolute\nG1 X0 Y0 Z10 F1000 ; move to warming area\nM84 ; steppers idle \n\nM104 S160 ; set tip (no wait)\nM190 S60 ; wait for heater bed\nM140 S[first_layer_bed_temperature] ; set heater bed\n\nM109 S[first_layer_temperature] ; wait for tip temperature\n\nG28 ; move all home\nG92 X0 Y0 Z0 E0.0 ; set current position as home\n\nG1 Y55.0 F2100.0 ; move Y 55 up\nG1 Y60.0 E5.0 F100.0 ; wipe1\nG1 Y90.0 E7.0 F250.0 ; wipe2\n\n;necessary?\nG92 Z0.0 ; reset Z\nG92 E0.0 ; reset extruder | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = -0.294 | |
| [settings] | |
| autocenter = 1 | |
| mode = expert | |
| [simple] | |
| avoid_crossing_perimeters = 1 | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| bed_temperature = 62 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_fan_speed = 100 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| cooling = 1 | |
| default_acceleration = 0 | |
| disable_fan_first_layers = 1 | |
| duplicate_distance = 6 | |
| end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors | |
| external_fill_pattern = rectilinear | |
| external_perimeter_speed = 70% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extruder_offset = 0x0 | |
| extrusion_axis = E | |
| extrusion_multiplier = 1 | |
| extrusion_width = 0 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 60 | |
| filament_diameter = 3 | |
| fill_angle = 45 | |
| fill_density = 40% | |
| fill_pattern = line | |
| first_layer_bed_temperature = 65 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.5 | |
| first_layer_speed = 30% | |
| first_layer_temperature = 170 | |
| gap_fill_speed = 20 | |
| gcode_arcs = 0 | |
| gcode_comments = 0 | |
| gcode_flavor = reprap | |
| infill_acceleration = 0 | |
| infill_every_layers = 10 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_speed = 60 | |
| layer_gcode = | |
| layer_height = 0.4 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| min_skirt_length = 0 | |
| notes = | |
| nozzle_diameter = 0.5 | |
| only_retract_when_crossing_perimeters = 1 | |
| output_filename_format = [input_filename_base].gcode | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 30 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 1 | |
| retract_length = 1 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 30 | |
| skirt_distance = 6 | |
| skirt_height = 1 | |
| skirts = 1 | |
| slowdown_below_layer_time = 30 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_layers = 0 | |
| support_material_interface_spacing = 0 | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| temperature = 165 | |
| threads = 2 | |
| toolchange_gcode = | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 3 | |
| travel_speed = 130 | |
| use_relative_e_distances = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = 0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment