Optware on DD-WRT with TL-WR1043ND

gistfile1.sh

# From: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=86912

# 1. Prepare the USB disk 
# Create an ext3 partition using GParted for instance 

#2. Configure DD-WRT 
#Under Services->Services->Secure Shell: 
#* Enable SSHd 
#* Click Apply Settings 
#
#Under Services->USB: 
#* Enable Core USB Support 
#* Disable USB Printer Support (enable it if you need printing support) 
#* Enable USB Storage Support 
#* Enable Automatic Drive Mount 
#* Set Disk Mount Point to /mnt 
#* Click Apply Settings 

#3. Plug the USB drive into the router and reboot it 
#* SSH into your box using user root and make sure, using mount, that your USB stick was mounted correctly (you can also check this on the web #interface under Services->USB). 

#4. Create and prepare necessary structure 
#* SSH into your box using user root if not already done at previous step: 
cd /mnt 
mkdir etc opt root 
touch optware.enable 
chmod 755 etc opt root 
mkdir opt/lib 
chmod 755 opt/lib 
cp -a /etc/* /mnt/etc/ 
mount -o bind /mnt/etc /etc 
mount -o bind /mnt/opt /jffs 

#5. Install the required libraries for the MIPS (big-endian) architecture and OpenWRT's opkg 
#cd /tmp 
wget http://downloads.openwrt.org/backfire/10.03.1/ar71xx/packages/libc_0.9.30.1-43.32_ar71xx.ipk
wget http://downloads.openwrt.org/backfire/10.03.1/ar71xx/packages/opkg_576-2_ar71xx.ipk
ipkg install libc_0.9.30.1-43.32_ar71xx.ipk opkg_576-2_ar71xx.ipk


#You will get the following output with error messages. You can't avoid it so don't worry about it. 
#
#ERROR: File not found: //usr/local/lib/ipkg/lists/whiterussian 
#You probably want to run `ipkg update' 
#ERROR: File not found: //usr/local/lib/ipkg/lists/non-free 
#You probably want to run `ipkg update' 
#ERROR: File not found: //usr/local/lib/ipkg/lists/backports 
#You probably want to run `ipkg update' 
#/bin/ipkg: line 1184: sort: not found 
#Unpacking libc...Done. 
#Configuring libc...Done. 
#ERROR: File not found: //usr/local/lib/ipkg/lists/whiterussian 
#You probably want to run `ipkg update' 
#ERROR: File not found: //usr/local/lib/ipkg/lists/non-free 
#You probably want to run `ipkg update' 
#ERROR: File not found: //usr/local/lib/ipkg/lists/backports 
#You probably want to run `ipkg update' 
#/bin/ipkg: line 1184: sort: not found 
#Unpacking opkg...Done. 
#Configuring opkg...Done. 

#Type the following lines to create the configuration file for opkg: 

cat > /etc/opkg.conf << EOF 
src/gz snapshots http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages 
dest root /opt 
dest ram /opt/tmp 
lists_dir ext /opt/tmp/var/opkg-lists 
EOF 

#Let's make sure everything works properly: 

umount /jffs 
mount -o bind /mnt/root /tmp/root 
mount -o bind /mnt/opt /opt 
export LD_LIBRARY_PATH='/opt/lib:/opt/usr/lib:/lib:/usr/lib' 
opkg update 

#You should see: 

#Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/Packages.gz. 
#Inflating http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/Packages.gz. 
#Updated list of available packages in /opt/tmp/var/opkg-lists/snapshots. 
#
#6. Set the startup script to make the changes take effect each time upon reboot 

#Under DD-WRT’s web interface, Administration->Commands, input the following commands in the window then click "Save Startup": 

##!/bin/sh 

#sleep 10 
#if [ -f /mnt/optware.enable ]; then 
#mount -o bind /mnt/etc /etc 
#mount -o bind /mnt/root /tmp/root 
#mount -o bind /mnt/opt /opt 
#else 
#exit 
#fi 

#if [ -d /opt/usr ]; then 
#export LD_LIBRARY_PATH='/opt/lib:/opt/usr/lib:/lib:/usr/lib' 
#export PATH='/opt/bin:/opt/usr/bin:/opt/sbin:/opt/usr/sbin:/bin:/sbin:/usr/sbin:/usr/bin' 
#else 
#exit 
#fi 

# Note that some users have reported issues that they were able to fix by making the script sleep 10 seconds instead of 5. 
#
# 7. Modification of the profile file 
#
# SSH into your box then copy/paste the commands below to PuTTY window to create a script running each time when user root logins: 
#
#cat > /mnt/root/.profile << EOF 
#export LD_LIBRARY_PATH='/opt/lib:/opt/usr/lib:/lib:/usr/lib:/opt/usr/local/lib' 
#export PATH='/sbin:/opt/bin:/opt/usr/bin:/opt/sbin:/opt/usr/sbin:/bin:/usr/bin:/usr/sbin:/opt/usr/local/bin' 
#export PS1='\[\033[01;31m\]\u@\h \[\033[01;34m\]\W \$ \[\033[00m\]' 
#export TERMINFO='/opt/usr/share/terminfo' 
#EOF 

#The above script will set the variables for us and also provide a nice colored command line prompt. 
#
#8. Reboot and check 
#
#Reboot your device with reboot 
#When it's back on the track, SSH into your box. 
#Run opkg update 
#
#You can start installing all kind of wild things ! Yeeehhhaaa !