Script that can transform a mint raspbian installation into a media center with external I2S DAC that runs Kodi and can play audio over the network and bluetooth via pulseaudio

install_woolbird.sh

#!/bin/bash

# this script sets up a mint raspbian installation as follows:
# - all packages updated
# - my public ssh key is authorized
# - onboard bluetooth disabled
# - onboard analog audio disabled
# - PCM5102a DAC as audio output
# - network audio relay through pulseaudio with zeroconf support
# - bluetooth audio relay through pulseaudio
# - kodi media center with inputstream.adaptive plugin that starts up on boot
# - hostname of the installation set to $NEW_HOSTNAME

if [ "$EUID" -ne 0 ]; then
  echo "Run as root pal"
  exit
fi

NEW_HOSTNAME=woolbird

# disable onboard audio
sed -i 's/# Enable audio (loads snd_bcm2835)//' /boot/config.txt
sed -i 's/dtparam=audio=on//' /boot/config.txt

# disable onboard bt
echo "dtoverlay=pi3-disable-bt" >> /boot/config.txt

# enable I2S dac
echo "dtoverlay=hifiberry-dac" >> /boot/config.txt

# install public ssh key
mkdir /home/pi/.ssh
echo "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDFObzc4AM01Qmz4ULOsqm7UCSqh6XInbjSakiva56Otox+0Hni8blwYh28NIUGUeb1SSeyvU3iX/SVjqBZlmrMrklgx/ITnEo1e+kJrL7jhqxDHG3lssw5p60iMss/qFEkScbkNisPS0xERC8tlhmo6aul+EQfyEZIEnd7Uf9Njfz56zuyntrEKl9MUZTdks2ZlylAqaalEB+VJmtpcs2mFUtpE/QDiIjl08hpLuZW9y6bae4YWW5U7n3XBDwBOb1Vax1X+pLr7kwrZAaquwThO6cde6USEm5YfTVokNS9W8k+37UL4LBeATkwAFwjyfIGqEyFnyTxnK/K8yGIHiXP me@LTT" > /home/pi/.ssh/authorized_keys

# set permissions
chown -R pi:pi /home/pi/.ssh

# get system up to date
apt-get -y update
apt-get -y upgrade

# install packages
apt-get -y install kodi kodi-inputstream-adaptive pulseaudio pulseaudio-module-bluetooth pulseaudio-module-zeroconf

# install the proper bluetooth.conf
wget -O /etc/dbus-1/system.d/bluetooth.conf https://git.kernel.org/pub/scm/bluetooth/bluez.git/plain/src/bluetooth.conf?id=8eb993e983013e8a12145d4a1eefbde45de9d421

# configure pulseaudio for network audio
echo "" >> /etc/pulse/system.pa
echo "load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.178.0/24 auth-anonymous=1 auth-cookie-enabled=0" >> /etc/pulse/system.pa

# configure pulseaudio for bluetooth audio
echo "" >> /etc/pulse/system.pa
echo "load-module module-bluetooth-policy" >> /etc/pulse/system.pa
echo "load-module module-bluetooth-discover" >> /etc/pulse/system.pa

# further configure pulseaudio for network audio (this needs to go at the end of the file, because of https://gist.github.com/Tobiaqs/0ef7bd2e56160650264f9b77de2db50f#segmentation-fault-on-armv6-or-dbus-related-error)
echo "" >> /etc/pulse/system.pa
echo "load-module module-zeroconf-publish" >> /etc/pulse/system.pa

# install pulseaudio service
cat <<EOF > /etc/systemd/system/pulseaudio.service
[Unit]
Description=PulseAudio Daemon
After=bluetooth.service

[Install]
WantedBy=multi-user.target

[Service]
Type=simple
PrivateTmp=true
ExecStart=/usr/bin/pulseaudio --system --realtime --disallow-exit --no-cpu-limit --disable-shm
EOF

# install pulseaudio service
systemctl daemon-reload
systemctl enable pulseaudio

# fix bluetoothd problem with avrcp plugin
sed -i 's/\/bluetoothd/\/bluetoothd --noplugin=avrcp/' /lib/systemd/system/bluetooth.service

# restart bluetoothd
systemctl daemon-reload
systemctl restart bluetooth

# set hostname
echo $NEW_HOSTNAME > /etc/hostname
sed -i "s/127.0.1.1.*raspberrypi/127.0.1.1\t$NEW_HOSTNAME/g" /etc/hosts

# allow user pi to play stuff over pulseaudio (necessary for the "play through pulseaudio" option to appear in kodi)
usermod -aG pulse-access pi

# make kodi boot up automatically
sed -i 's/exit 0//' /etc/rc.local
echo "sudo -H -u pi kodi-standalone &" >> /etc/rc.local
echo "exit 0" >> /etc/rc.local

reboot