Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
HD 360° Timelapse and FFmpeg tutorial

How to capture, stitch and publish a 360° timelapse

Consumer ready 360° cameras are becoming ever more accessible and many people are experimenting with a variety of 360° content. Out of the many cameras on the market the Ricoh Theta S is one of the most user-friendly, turn-key solutions with lots of built-in features. However, the camera's videos are limited 1920x960 resolution and the Theta+ app only lets you create a timelapse with up to 300 or 400 images. The workaround is to use interval shooting to capture as many images as you'd like at the 5376x2688 to full resolution and then stitch them together manually into an HD video. There are few GUI solutions (especially open-source/free) which let you do this with ease. Here's how you do it:

Set up interval shooting on your Ricoh Theta S

This step is specific to the Theta s, but the rest of the tutorial applies to any series of 360° images

  • Once you choose a location, set up the camera on a tripod and connect to it with your smartphone, go to the shooting settings and choose interval shooting
  • This lets you set the number of images to capture and the interval between them. Unfortunately, the maximum number of images is currently 200 so in my case when I was capturing an image every 10 seconds, I would have to reset the interval shooting roughly every 30 minutes. Based on the length of your interval, make sure to calculate how long the camera will shoot so you know when to come back and reset it.
  • Another drawback with the Theta is that tripod mounts will cover the ports, making it impossible to charge the camera while shooting, so you only have juice for about 1.5 hours of shooting. Which in my case was about 600 images, or 24 seconds of timelapse @ 25fps

Transfer and organize files

  • Once you are done capturing images and transferring them to your computer, you will need to make sure they are all sequentially named so FFmpeg can handle the entire series
  • In my case, I had to delete a couple images and then rename all of them starting with Image_0001.JPG to Image_0585.JPG Make sure you have an extra '0' digit in the file names so the images are ordered correctly
  • If you are on a Windows operating system, using the Bulk Rename Utility makes this process a breeze
  • If you are on Linux (or OSX) you can use an awesome tool called mmv - man page or a variety of other command line options

Stitching images into a video with FFmpeg

  • Now comes the fun part, actually spinning up FFmpeg and combining the images into a video
  • First, if you don't have it, you need to install ffmpeg and if you are on Windows, add it to your PATH so you can call it in the command line
  • Open your Terminal/PowerShell/cmd
  • Navigate into the folder with your sequentially numbered images

The entire command I used looks like this:

ffmpeg -r 25 -start_number 0001 -i Image_%04d.JPG -s 3840x1920 -vcodec libx264 -b:v 10M pix_fmt yuv420p video_out.mp4

Now, let's unpack what all those things mean:

  • ffmpeg is the command that calls the actual application
  • -r is the parameter for setting the frame rate of your video, in my case above, 25 frames per second
  • -start_number is the number of the first image in your sequencem. Since my images start with Image_0001.JPG, 0001 is my start number
  • -i is the path to your images, but since we already navigated to the image folder, we only specify the image name
  • Image_%04d.JPG tells ffmpeg that the filename is Image_ followed by four digits. If you had more than 1000 images for example with numbers from Image_00001 to Image_01200, you would specify Image_%05d.JPG
  • -s lets us adjust the resolution of the output video. In my case, I scaled it down from 5376x2688 to 3840x1920 while maintaining the equirectangular 2:1 ratio
  • -vcodec lets you set the video codec you want to use. In this case libx264 for H.264
  • -b:v sets the video bitrate. The number is followed by either K or M Kbit/s and Mbit/s so here the bitrate is set to 10 Mbps
  • -pix_fmt sets the pixel formate of the video, set to yuv420p for playback
  • Finally, video_out.mp4 is the name and format of the output video. Now just hit enter and watch the magic happen

For a more complete guide and cheatsheet to creating 360° videos with FFmpeg check out nickkraakman's FFmpeg Cheat Sheet for Creating 360° Video

Last step - inject 360 metadata

  • When the video comes out of FFmpeg, it has no 360 spatial metadata, so YouTube or any other video player won't recognize it as a 360° equirectangular video
  • To fix this, we will use an awesome tool developed by Google - The Spatial Media Metadata Injector
  • Download it from google's github repo above and look at how to use it
  • It is extremely simple to use GUI interface. Launch the app, open your video, check My video is spherical (360) and press Inject metadata
  • Done

Here is our finished video

Now your video is ready to be uploaded to YouTube or played in 360° mode with the Windows Movies & TV app.

Note that the Ricoh Theta desktop app will not recognize or play this as a 360° video.

@MohammedAlsayedOmar

This comment has been minimized.

Copy link

commented Jul 22, 2018

In this line,
ffmpeg -r 25 -start_number 0001 -i Image_%04d.JPG -s 3840x1920 -vcodec libx264 -b:v 10M pix_fmt yuv420p video_out.mp4
Add the - before the pix_fmt
The final line should look like
ffmpeg -r 25 -start_number 0001 -i Image_%04d.JPG -s 3840x1920 -vcodec libx264 -b:v 10M -pix_fmt yuv420p video_out.mp4
Thank you!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.