new openevse package

openevse2.yaml

###
# OpenEVSE package for Home Assistant
# Supports ONLY MQTT interactions
# Author: Tony Apuzzo
#
# 2022-11-23 - Updates for MQTT platform changes coming in HASS 2022.12
###

mqtt:
  number:
    - name: OpenEVSE Pilot
      command_topic: openevse/rapi/in/$SC
      min: 6
      max: 40
      state_topic: openevse/pilot
      icon: mdi:current-ac
    - name: OpenEVSE Charge Limit
      min: 0
      max: 200
      command_topic: openevse/rapi/in/$SH

  sensor:
    - name: OpenEVSE Current Now
      icon: mdi:current-ac
      state_topic: >-
        openevse/amp
      device_class: current
      state_class: measurement
      unit_of_measurement: "A"
      value_template: >-
        {{- (value|float / 1000.0) | round(1) -}}
    - name: OpenEVSE Voltage
      icon: mdi:flash
      state_topic: >-
        openevse/voltage
      device_class: voltage
      state_class: measurement
      unit_of_measurement: "V"
      value_template: >-
        {{- value | float -}}
    - name: OpenEVSE Temperature
      icon: mdi:thermometer
      state_topic: >-
        openevse/temp1
      device_class: temperature
      state_class: measurement
      unit_of_measurement: '°C'
      value_template: >-
        {{- (value | float / 10.0) | round(0) -}}
    - name: OpenEVSE Pilot
      icon: mdi:current-ac
      state_topic: >-
        openevse/pilot
      device_class: current
      unit_of_measurement: "A"
      value_template: >-
        {{- value | int -}}
    - name: OpenEVSE Total Energy
      state_topic: >-
        openevse/wh
      device_class: energy
      state_class: total_increasing
      unit_of_measurement: "kWh"
      value_template: >-
        {{- (value | float / 1000.0) | round(0) -}}

template:
  - trigger:
    - platform: mqtt
      topic: 'openevse/rapi/in/#'
    sensor:
      - name: OpenEVSE RAPI In
        state: '{{- trigger.topic.split("/") | last -}}'
        attributes:
          topic: '{{- trigger.topic -}}'
          payload: '{{- trigger.payload -}}'
  - trigger:
    - platform: mqtt
      topic: 'openevse/rapi/out'
    sensor:
      - name: OpenEVSE RAPI Out
        state: >-
          {{- trigger.payload | regex_replace('^\$([^ ]+) ?(.*)\^[0-9A-F]*$', '\\2') }}
        attributes:
          ok: >-
            {{- trigger.payload | regex_replace('^\$([^ ]+) ?(.*)\^[0-9A-F]*$', '\\1') == 'OK' -}}
          topic: '{{- trigger.topic -}}'
          payload: '{{- trigger.payload -}}'
          command: '{{- states("sensor.openevse_rapi_in") -}}'
        icon: >-
          {{ "mdi:eye" if trigger.payload is match('\$OK') else "mdi:alert" }}
  - trigger:
    - platform: state
      entity_id: sensor.openevse_rapi_out
      attribute: command
      to: '$GH'
    sensor:
      - name: OpenEVSE Energy Limit
        device_class: energy
        unit_of_measurement: "kWh"
        state: >-
          {{- states('sensor.openevse_rapi_out') | int -}}

  - trigger:
    - platform: state
      entity_id: sensor.openevse_rapi_out
      attribute: command
      to: '$GU'
    sensor:
      - name: OpenEVSE Session Energy
        device_class: energy
        state_class: measurement
        unit_of_measurement: "kWh"
        # '41660042 1328789'
        state: >-
          {{- (states('sensor.openevse_rapi_out').split(' ')[0]
              | float / 3600000.0) | round(2) -}}
  - trigger:
    - platform: state
      entity_id: sensor.openevse_rapi_out
      attribute: command
      to: '$GE'
    sensor:
      - name: OpenEVSE Service Level
        # Bitfield
        #  Bit 1: Off = Level 1
        #  Bit 1: On  = Level 2
        #  Bit 6: Off = Use Level designation from bit 1
        #  Bit 6: On  = Automaticly determine service level
        state: >-
          {%- set flags = states('sensor.openevse_rapi_out').split(' ')[1] | int(0, 16) -%}
          {%- if (flags | bitwise_and(0x20)) == 0 -%}
            Auto
          {%- elif flags | bitwise_and(0x1) -%}
            L2
          {%- else -%}
            L1
          {%- endif -%}
  - trigger:
    - platform: mqtt
      topic: openevse/state
    sensor:
      - name: OpenEVSE State
        state: >-
          {%- set value = trigger.payload -%}
          {%- if value | regex_match('^[01]$') -%}
            Not Connected
          {%- elif value | regex_match('^2$') -%}
            Connected
          {%- elif value | regex_match('^3$') -%}
            Charging
          {%- elif value | regex_match('^([456789]|10)$') -%}
            Error ({{- value -}})
          {%- elif value | regex_match('^254$') -%}
            Sleeping
          {%- elif value | regex_match('^255$') -%}
            Disabled
          {%- else -%}
            Unknown ({{- value -}})
          {%- endif -%}
        icon: >-
          {%- set value = trigger.payload -%}
          {%- if value | regex_match('^[01]$') -%}
            mdi:power-plug-off
          {%- elif value | regex_match('^2$') -%}
            mdi:car-electric
          {%- elif value | regex_match('^3$') -%}
            mdi:battery-charging
          {%- elif value | regex_match('^([456789]|10)$') -%}
            mdi:battery-alert
          {%- elif value | regex_match('^254$') -%}
            mdi:sleep
          {%- elif value | regex_match('^255$') -%}
            mdi:power-off
          {%- else -%}
            mdi:battery-unknown
          {%- endif -%}
        attributes:
          topic: '{{- trigger.topic -}}'
          payload: '{{- trigger.payload -}}'

switch:
  - platform: template
    switches:
      openevse_enablement:
        friendly_name: OpenEVSE Disable/Enable
        icon_template: mdi:power
        value_template: >-
          {{- not(
            is_state_attr('sensor.openevse_state', 'payload', 254) or
            is_state_attr('sensor.openevse_state', 'payload', 255))
          -}}
        turn_on:
          service: mqtt.publish
          data:
            topic: 'openevse/rapi/in/$FE'
        turn_off:
          service: mqtt.publish
          data:
            topic: 'openevse/rapi/in/$FD'

script:
  openevse_rapi_ge:
    alias: OpenEVSE Get Settings
    sequence:
      service: mqtt.publish
      data:
        topic: 'openevse/rapi/in/$GE'
  openevse_rapi_gu:
    alias: OpenEVSE Get Energy Usage
    sequence:
      service: mqtt.publish
      data:
        topic: 'openevse/rapi/in/$GU'
  openevse_rapi_gh:
    alias: OpenEVSE Get Energy Limit
    sequence:
      service: mqtt.publish
      data:
        topic: 'openevse/rapi/in/$GH'

automation openevse:
  - alias: Request update of settings flags
    mode: single
    trigger:
      - platform: state
        entity_id: sensor.openevse_state
      - platform: state
        entity_id: sensor.openevse_pilot
    action:
      - service: script.openevse_rapi_gh
      - wait_for_trigger:
          - platform: state
            entity_id: sensor.openevse_rapi_out
            attribute: command
            to: '$GH'
            for: '00:00:01'
      - service: script.openevse_rapi_gu
      - wait_for_trigger:
          - platform: state
            entity_id: sensor.openevse_rapi_out
            attribute: command
            to: '$GU'
            for: '00:00:01'
      - service: script.openevse_rapi_ge
      - wait_for_trigger:
          - platform: state
            entity_id: sensor.openevse_rapi_out
            attribute: command
            to: '$GE'
            for: '00:00:01'

  - alias: Enforce charge limit
    mode: single
    trigger:
      - platform: state
        entity_id: sensor.openevse_state
        to: 
          - Connected
          - Charging
    action:
      - service: mqtt.publish
        data:
          topic: 'openevse/rapi/in/$SH'
          payload_template: >-
            {{- states('number.openevse_charge_limit') -}}
      - wait_for_trigger:
          - platform: state
            entity_id: sensor.openevse_rapi_out
            attribute: command
            to: '$SH'
            for: '00:00:01'
      - service: script.openevse_rapi_gh
      - wait_for_trigger:
          - platform: state
            entity_id: sensor.openevse_rapi_out
            attribute: command
            to: '$GH'
            for: '00:00:01'

Hi, it seems the usage of the MQTT platform will change soon. I have some warnings :

Manually configured MQTT sensor(s) found under platform key sensor.

Please move the configuration to the mqtt integration key and restart Home Assistant to fix this issue. See the documentation, for more information.

Have you already fixed it ?

@quentindavid I am not using the OpenEVSE charger any more, so I can't test any changes, but I made the change based on documentation and verified that it loads without errors or warnings in HASS.

Let me know if it works or not.

Hi @TonyApuzzo ! Thanks a lot for the refactoring :) It seems to work except this warning

Manually configured MQTT number(s) found under platform key number.

Please move the configuration to the mqtt integration key and restart Home Assistant to fix this issue. See the [documentation](https://www.home-assistant.io/integrations/number.mqtt/#new_format), for more information.

I still need to dig a little to be sure everything is running fine except that.

Ah yeah, I should've checked the other platforms. It seems that number is the only other one I use that's changing, so I updated that one too.

Yeah it seems to have done the trick. Thanks a lot @TonyApuzzo !!