Twanne/smart_lux_dimmer.yaml

## smart_lux_dimmer.yaml
blueprint:
  name: Smart Lux Dimmer
  author: AntonH
  description: |
    Version 4.3
    Switch or dim lights based on the value of a light sensor.
    Light colors or temperature can be set to a fixed value when inside or outside the measuring range (different values are possible).
    Settings for brightness, color or temperature outside min and max values of the sensor can be set.
    To smoothen out transitions, a time can be set where the light will move from the current to the new brightness.

  source_url: https://gist.github.com/Twanne/02dfb154084a8b9bf927c29160df4af3
  domain: automation
  input:

    light_sensor_entity:
      name: Light Sensor
      description: Which light sensor do you want to use to measure the ambient light value?
      selector:
        entity:
          filter:
            - domain: sensor
              device_class: illuminance
    target_light:
      name: Target lights
      description: Which lights do you want to control?
      selector:
        target:
          entity:
            domain: light
    run_conditions:
      name: Conditions
      description: |
        Only run when these conditions are met.
        (Remove Time Condition if not needed)
      default:
        - condition: time
      selector:
        condition:
    max_brightness_value:
      name: Maximum ambient light value
      description: Dynamically change the light so long as the ambient light stays under this value.
      default: 500
      selector:
        number:
          min: 0
          max: 1000
          step: 10
          unit_of_measurement: lx
          mode: slider
    min_brightness_value:
      name: Minimum ambient light value
      description: Dynamically change the light so long as the ambient light stays above this value.
      default: 0
      selector:
        number:
          min: 0
          max: 1000
          step: 10
          unit_of_measurement: lx
          mode: slider
    light_value_1:
      name: Brightness at maximum light level
      description: Brightness of the light at maximum ambient light.
      default: 0
      selector:
        number:
          min: 0
          max: 100
          step: 1
          unit_of_measurement: '%'
          mode: slider
    light_value_2:
      name: Brightness at minimum light level
      description: Brightness of the light at minimum ambient light.
      default: 100
      selector:
        number:
          min: 0
          max: 100
          step: 1
          unit_of_measurement: '%'
          mode: slider
    transition_time:
      name: Transition time
      description: |
        The time it takes for the light to transition from the set value to the next.
        WARNING: this can smoothen the transition, but your light needs to support it.
      default: 0
      selector:
        number:
          min: 0
          max: 300
          step: 1
          unit_of_measurement: s
          mode: slider
    include_color_or_temp:
      name: Include color or temperature
      description: Do you want to set a color or temperature value for the light?
      default: include_no_color_temp
      selector:
        select:
          options:
            - label: I don't want to set color or temperature
              value: include_no_color_temp
            - label: Set color
              value: include_color
            - label: Set temperature
              value: include_temp
    light_color:
      name: Light color
      description: Color of the light when between minimum and maximum ambient light values.
      selector:
        color_rgb:
      default: [255,255,255]
    light_temp:
      name: Light temperature
      description: Temperature of the light when between minimum and maximum ambient light values.
      default: 2000
      selector:
        color_temp:
    include_brightness_over_under:
      name: Include brightness values when outside range
      description: I want the automation to set a brightness when the ambient light goes outside of the set range. (Over maximum and under minimum ambient)
      default: false
      selector:
        boolean:
    light_brightness_over_max:
      name: Brightness when ambient light value over max.
      description: Brightness of the light when the ambient light is higher than the set maximum value.
      default: 0
      selector:
        number:
          min: 0
          max: 100
          step: 1
          unit_of_measurement: '%'
          mode: slider
    light_brightness_under_min:
      name: Brightness when ambient light value under min.
      description: Brightness of the light when the ambient light is lower than the set minimum value.
      default: 100
      selector:
        number:
          min: 0
          max: 100
          step: 1
          unit_of_measurement: '%'
          mode: slider
    include_color_or_temp_over_under:
      name: Include color or temperature values when outside range
      description: |
        Set a color or temperature value for the light when over maximum or under minimum ambient light value?
        **'Include values for under min and over max' MUST BE TRUE**
      default: include_no_color_temp_outside_range
      selector:
        select:
          options:
            - label: I don't want to set color or temperature when outside range
              value: include_no_color_temp_outside_range
            - label: Set color when outside range
              value: include_color_outside_range
            - label: Set temperature when outside range
              value: include_temp_outside_range
    light_color_over_max:
      name: Color when ambient light value over max.
      description: Color of the light when the ambient light is higher than the set maximum value.
      selector:
        color_rgb:
      default: [255,255,255]
    light_color_under_min:
      name: Color when ambient light value under min.
      description: Color of the light when the ambient light is lower than the set minimum value.
      selector:
        color_rgb:
      default: [255,255,255]
    light_temp_over_max:
      name: Temperature when ambient light value over max.
      description: Temperature of the light when the ambient light is higher than the set maximum value.
      default: 2000
      selector:
        color_temp:
    light_temp_under_min:
      name: Temperature when ambient light value under min.
      description: Temperature of the light when the ambient light is lower than the set minimum value.
      default: 2000
      selector:
        color_temp:

mode: single

#Variables for use in calculations and statements
variables:
  include_color_or_temp: !input include_color_or_temp
  include_brightness_over_under: !input include_brightness_over_under
  include_color_or_temp_over_under: !input include_color_or_temp_over_under
  light_sensor: !input light_sensor_entity
  max_brightness_value: !input max_brightness_value
  min_brightness_value: !input min_brightness_value
  maxB: '{{ max_brightness_value * 2.55 }}'
  minB: '{{ min_brightness_value * 2.55 }}'
  light_value_1: !input light_value_1
  light_value_2: !input light_value_2
  light1: '{{ light_value_1 * 2.55 }}'
  light2: '{{ light_value_2 * 2.55 }}'
  slope: '{{ ( light1 - light2 ) / ( maxB - minB ) }}'
  constant: '{{ light1 - ( slope * maxB ) }}'
  light_brightness_over_max: !input light_brightness_over_max
  light_brightness_under_min: !input light_brightness_under_min
  brightness_over_max_pct: '{{ light_brightness_over_max * 2.55 }}'
  brightness_under_min_pct: '{{ light_brightness_under_min * 2.55 }}'

#Triggers
triggers:
  trigger: state
  entity_id: !input light_sensor_entity

#Conditions
conditions: !input run_conditions

#Actions
actions:
  - choose:
#Actions when no states need to be sent to target outside ambient light value range
      - conditions:
          - condition: template
            value_template: '{{ include_brightness_over_under is false }}'
        sequence:
          - choose:
              #no color or temperature values needed
              - conditions:
                  - condition: template
                    value_template: '{{ include_color_or_temp == "include_no_color_temp" }}'
                sequence:
                  - action: light.turn_on
                    data:
                      transition: !input transition_time
                      brightness: '{{ (( slope * states(light_sensor)|int ) + constant)|round }}'
                    target: !input target_light
              #color value needed
              - conditions:
                  - condition: template
                    value_template: '{{ include_color_or_temp == "include_color" }}'
                sequence:
                  - action: light.turn_on
                    data:
                      transition: !input transition_time
                      brightness: '{{ (( slope * states(light_sensor)|int ) + constant)|round }}'
                      rgb_color: !input light_color
                    target: !input target_light
              #temperature value needed
              - conditions:
                  - condition: template
                    value_template: '{{ include_color_or_temp == "include_temp" }}'
                sequence:
                  - action: light.turn_on
                    data:
                      transition: !input transition_time
                      brightness: '{{ (( slope * states(light_sensor)|int ) + constant)|round }}'
                      color_temp: !input light_temp
                    target: !input target_light

#Actions when states need to be sent to target outside ambient light value range
      - conditions:
          - condition: template
            value_template: '{{ include_brightness_over_under is true }}'
        sequence:
          - choose:
              #no color or temperature values needed outside range
              - conditions:
                  - condition: template
                    value_template: '{{ include_color_or_temp_over_under == "include_no_color_temp_outside_range" }}'
                sequence:
                  - choose:
                      #Actions when over maximum measured light value
                      - conditions:
                          - condition: numeric_state
                            entity_id: !input light_sensor_entity
                            above: !input max_brightness_value
                        sequence:
                          - action: light.turn_on
                            data:
                              transition: !input transition_time
                              brightness: '{{ brightness_over_max_pct }}'
                            target: !input target_light

                      #Actions when under minimum measured light value
                      - conditions:
                          - condition: numeric_state
                            entity_id: !input light_sensor_entity
                            below: !input min_brightness_value
                        sequence:
                          - action: light.turn_on
                            data:
                              transition: !input transition_time
                              brightness: '{{ brightness_under_min_pct }}'
                            target: !input target_light

                      #Actions when measured light value is between minimum and maximum settings
                      - conditions:
                          - condition: numeric_state
                            entity_id: !input light_sensor_entity
                            below: !input max_brightness_value
                            above: !input min_brightness_value
                        sequence:
                          - action: light.turn_on
                            data:
                              transition: !input transition_time
                              brightness: '{{ (( slope * states(light_sensor)|int ) + constant)|round }}'
                            target: !input target_light

              #Color values needed outside range
              - conditions:
                  - condition: template
                    value_template: '{{ include_color_or_temp_over_under == "include_color_outside_range" }}'
                sequence:
                  - choose:
                      #Actions when over maximum measured light value
                      - conditions:
                          - condition: numeric_state
                            entity_id: !input light_sensor_entity
                            above: !input max_brightness_value
                        sequence:
                          - action: light.turn_on
                            data:
                              transition: !input transition_time
                              brightness: '{{ brightness_over_max_pct }}'
                              rgb_color: !input light_color_over_max
                            target: !input target_light

                      #Actions when under minimum measured light value
                      - conditions:
                          - condition: numeric_state
                            entity_id: !input light_sensor_entity
                            below: !input min_brightness_value
                        sequence:
                          - action: light.turn_on
                            data:
                              transition: !input transition_time
                              brightness: '{{ brightness_under_min_pct }}'
                              rgb_color: !input light_color_under_min
                            target: !input target_light

                      #Actions when measured light value is between minimum and maximum settings
                      - conditions:
                          - condition: numeric_state
                            entity_id: !input light_sensor_entity
                            below: !input max_brightness_value
                            above: !input min_brightness_value
                        sequence:
                          - action: light.turn_on
                            data:
                              transition: !input transition_time
                              brightness: '{{ (( slope * states(light_sensor)|int ) + constant)|round }}'
                              rgb_color: !input light_color
                            target: !input target_light

              #Temperature values needed outside range
              - conditions:
                  - condition: template
                    value_template: '{{ include_color_or_temp_over_under == "include_temp_outside_range" }}'
                sequence:
                  - choose:
                      #Actions when over maximum measured light value
                      - conditions:
                          - condition: numeric_state
                            entity_id: !input light_sensor_entity
                            above: !input max_brightness_value
                        sequence:
                          - action: light.turn_on
                            data:
                              transition: !input transition_time
                              brightness: '{{ brightness_over_max_pct }}'
                              color_temp: !input light_temp_over_max
                            target: !input target_light

                      #Actions when under minimum measured light value
                      - conditions:
                          - condition: numeric_state
                            entity_id: !input light_sensor_entity
                            below: !input min_brightness_value
                        sequence:
                          - action: light.turn_on
                            data:
                              transition: !input transition_time
                              brightness: '{{ brightness_under_min_pct }}'
                              color_temp: !input light_temp_under_min
                            target: !input target_light

                      #Actions when measured light value is between minimum and maximum settings
                      - conditions:
                          - condition: numeric_state
                            entity_id: !input light_sensor_entity
                            below: !input max_brightness_value
                            above: !input min_brightness_value
                        sequence:
                          - action: light.turn_on
                            data:
                              transition: !input transition_time
                              brightness: '{{ (( slope * states(light_sensor)|int ) + constant)|round }}'
                              color_temp: !input light_temp
                            target: !input target_light
	blueprint:
	name: Smart Lux Dimmer
	author: AntonH
	description: \|
	Version 4.3
	Switch or dim lights based on the value of a light sensor.
	Light colors or temperature can be set to a fixed value when inside or outside the measuring range (different values are possible).
	Settings for brightness, color or temperature outside min and max values of the sensor can be set.
	To smoothen out transitions, a time can be set where the light will move from the current to the new brightness.

	source_url: https://gist.github.com/Twanne/02dfb154084a8b9bf927c29160df4af3
	domain: automation
	input:

	light_sensor_entity:
	name: Light Sensor
	description: Which light sensor do you want to use to measure the ambient light value?
	selector:
	entity:
	filter:
	- domain: sensor
	device_class: illuminance
	target_light:
	name: Target lights
	description: Which lights do you want to control?
	selector:
	target:
	entity:
	domain: light
	run_conditions:
	name: Conditions
	description: \|
	Only run when these conditions are met.
	(Remove Time Condition if not needed)
	default:
	- condition: time
	selector:
	condition:
	max_brightness_value:
	name: Maximum ambient light value
	description: Dynamically change the light so long as the ambient light stays under this value.
	default: 500
	selector:
	number:
	min: 0
	max: 1000
	step: 10
	unit_of_measurement: lx
	mode: slider
	min_brightness_value:
	name: Minimum ambient light value
	description: Dynamically change the light so long as the ambient light stays above this value.
	default: 0
	selector:
	number:
	min: 0
	max: 1000
	step: 10
	unit_of_measurement: lx
	mode: slider
	light_value_1:
	name: Brightness at maximum light level
	description: Brightness of the light at maximum ambient light.
	default: 0
	selector:
	number:
	min: 0
	max: 100
	step: 1
	unit_of_measurement: '%'
	mode: slider
	light_value_2:
	name: Brightness at minimum light level
	description: Brightness of the light at minimum ambient light.
	default: 100
	selector:
	number:
	min: 0
	max: 100
	step: 1
	unit_of_measurement: '%'
	mode: slider
	transition_time:
	name: Transition time
	description: \|
	The time it takes for the light to transition from the set value to the next.
	WARNING: this can smoothen the transition, but your light needs to support it.
	default: 0
	selector:
	number:
	min: 0
	max: 300
	step: 1
	unit_of_measurement: s
	mode: slider
	include_color_or_temp:
	name: Include color or temperature
	description: Do you want to set a color or temperature value for the light?
	default: include_no_color_temp
	selector:
	select:
	options:
	- label: I don't want to set color or temperature
	value: include_no_color_temp
	- label: Set color
	value: include_color
	- label: Set temperature
	value: include_temp
	light_color:
	name: Light color
	description: Color of the light when between minimum and maximum ambient light values.
	selector:
	color_rgb:
	default: [255,255,255]
	light_temp:
	name: Light temperature
	description: Temperature of the light when between minimum and maximum ambient light values.
	default: 2000
	selector:
	color_temp:
	include_brightness_over_under:
	name: Include brightness values when outside range
	description: I want the automation to set a brightness when the ambient light goes outside of the set range. (Over maximum and under minimum ambient)
	default: false
	selector:
	boolean:
	light_brightness_over_max:
	name: Brightness when ambient light value over max.
	description: Brightness of the light when the ambient light is higher than the set maximum value.
	default: 0
	selector:
	number:
	min: 0
	max: 100
	step: 1
	unit_of_measurement: '%'
	mode: slider
	light_brightness_under_min:
	name: Brightness when ambient light value under min.
	description: Brightness of the light when the ambient light is lower than the set minimum value.
	default: 100
	selector:
	number:
	min: 0
	max: 100
	step: 1
	unit_of_measurement: '%'
	mode: slider
	include_color_or_temp_over_under:
	name: Include color or temperature values when outside range
	description: \|
	Set a color or temperature value for the light when over maximum or under minimum ambient light value?
	'Include values for under min and over max' MUST BE TRUE
	default: include_no_color_temp_outside_range
	selector:
	select:
	options:
	- label: I don't want to set color or temperature when outside range
	value: include_no_color_temp_outside_range
	- label: Set color when outside range
	value: include_color_outside_range
	- label: Set temperature when outside range
	value: include_temp_outside_range
	light_color_over_max:
	name: Color when ambient light value over max.
	description: Color of the light when the ambient light is higher than the set maximum value.
	selector:
	color_rgb:
	default: [255,255,255]
	light_color_under_min:
	name: Color when ambient light value under min.
	description: Color of the light when the ambient light is lower than the set minimum value.
	selector:
	color_rgb:
	default: [255,255,255]
	light_temp_over_max:
	name: Temperature when ambient light value over max.
	description: Temperature of the light when the ambient light is higher than the set maximum value.
	default: 2000
	selector:
	color_temp:
	light_temp_under_min:
	name: Temperature when ambient light value under min.
	description: Temperature of the light when the ambient light is lower than the set minimum value.
	default: 2000
	selector:
	color_temp:

	mode: single

	#Variables for use in calculations and statements
	variables:
	include_color_or_temp: !input include_color_or_temp
	include_brightness_over_under: !input include_brightness_over_under
	include_color_or_temp_over_under: !input include_color_or_temp_over_under
	light_sensor: !input light_sensor_entity
	max_brightness_value: !input max_brightness_value
	min_brightness_value: !input min_brightness_value
	maxB: '{{ max_brightness_value * 2.55 }}'
	minB: '{{ min_brightness_value * 2.55 }}'
	light_value_1: !input light_value_1
	light_value_2: !input light_value_2
	light1: '{{ light_value_1 * 2.55 }}'
	light2: '{{ light_value_2 * 2.55 }}'
	slope: '{{ ( light1 - light2 ) / ( maxB - minB ) }}'
	constant: '{{ light1 - ( slope * maxB ) }}'
	light_brightness_over_max: !input light_brightness_over_max
	light_brightness_under_min: !input light_brightness_under_min
	brightness_over_max_pct: '{{ light_brightness_over_max * 2.55 }}'
	brightness_under_min_pct: '{{ light_brightness_under_min * 2.55 }}'

	#Triggers
	triggers:
	trigger: state
	entity_id: !input light_sensor_entity

	#Conditions
	conditions: !input run_conditions

	#Actions
	actions:
	- choose:
	#Actions when no states need to be sent to target outside ambient light value range
	- conditions:
	- condition: template
	value_template: '{{ include_brightness_over_under is false }}'
	sequence:
	- choose:
	#no color or temperature values needed
	- conditions:
	- condition: template
	value_template: '{{ include_color_or_temp == "include_no_color_temp" }}'
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ (( slope * states(light_sensor)\|int ) + constant)\|round }}'
	target: !input target_light
	#color value needed
	- conditions:
	- condition: template
	value_template: '{{ include_color_or_temp == "include_color" }}'
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ (( slope * states(light_sensor)\|int ) + constant)\|round }}'
	rgb_color: !input light_color
	target: !input target_light
	#temperature value needed
	- conditions:
	- condition: template
	value_template: '{{ include_color_or_temp == "include_temp" }}'
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ (( slope * states(light_sensor)\|int ) + constant)\|round }}'
	color_temp: !input light_temp
	target: !input target_light

	#Actions when states need to be sent to target outside ambient light value range
	- conditions:
	- condition: template
	value_template: '{{ include_brightness_over_under is true }}'
	sequence:
	- choose:
	#no color or temperature values needed outside range
	- conditions:
	- condition: template
	value_template: '{{ include_color_or_temp_over_under == "include_no_color_temp_outside_range" }}'
	sequence:
	- choose:
	#Actions when over maximum measured light value
	- conditions:
	- condition: numeric_state
	entity_id: !input light_sensor_entity
	above: !input max_brightness_value
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ brightness_over_max_pct }}'
	target: !input target_light

	#Actions when under minimum measured light value
	- conditions:
	- condition: numeric_state
	entity_id: !input light_sensor_entity
	below: !input min_brightness_value
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ brightness_under_min_pct }}'
	target: !input target_light

	#Actions when measured light value is between minimum and maximum settings
	- conditions:
	- condition: numeric_state
	entity_id: !input light_sensor_entity
	below: !input max_brightness_value
	above: !input min_brightness_value
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ (( slope * states(light_sensor)\|int ) + constant)\|round }}'
	target: !input target_light

	#Color values needed outside range
	- conditions:
	- condition: template
	value_template: '{{ include_color_or_temp_over_under == "include_color_outside_range" }}'
	sequence:
	- choose:
	#Actions when over maximum measured light value
	- conditions:
	- condition: numeric_state
	entity_id: !input light_sensor_entity
	above: !input max_brightness_value
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ brightness_over_max_pct }}'
	rgb_color: !input light_color_over_max
	target: !input target_light

	#Actions when under minimum measured light value
	- conditions:
	- condition: numeric_state
	entity_id: !input light_sensor_entity
	below: !input min_brightness_value
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ brightness_under_min_pct }}'
	rgb_color: !input light_color_under_min
	target: !input target_light

	#Actions when measured light value is between minimum and maximum settings
	- conditions:
	- condition: numeric_state
	entity_id: !input light_sensor_entity
	below: !input max_brightness_value
	above: !input min_brightness_value
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ (( slope * states(light_sensor)\|int ) + constant)\|round }}'
	rgb_color: !input light_color
	target: !input target_light

	#Temperature values needed outside range
	- conditions:
	- condition: template
	value_template: '{{ include_color_or_temp_over_under == "include_temp_outside_range" }}'
	sequence:
	- choose:
	#Actions when over maximum measured light value
	- conditions:
	- condition: numeric_state
	entity_id: !input light_sensor_entity
	above: !input max_brightness_value
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ brightness_over_max_pct }}'
	color_temp: !input light_temp_over_max
	target: !input target_light

	#Actions when under minimum measured light value
	- conditions:
	- condition: numeric_state
	entity_id: !input light_sensor_entity
	below: !input min_brightness_value
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ brightness_under_min_pct }}'
	color_temp: !input light_temp_under_min
	target: !input target_light

	#Actions when measured light value is between minimum and maximum settings
	- conditions:
	- condition: numeric_state
	entity_id: !input light_sensor_entity
	below: !input max_brightness_value
	above: !input min_brightness_value
	sequence:
	- action: light.turn_on
	data:
	transition: !input transition_time
	brightness: '{{ (( slope * states(light_sensor)\|int ) + constant)\|round }}'
	color_temp: !input light_temp
	target: !input target_light