bitcoin.conf

regtest=1


rpcuser=bitcoinuser
rpcpassword=bitcoinpass
rpcallowip=127.0.0.1
rpcconnect=127.0.0.1

gen=1
server=1
paytxfee=0.01
txindex=1


# ##
# ## bitcoin.conf configuration file. Lines beginning with # are comments.
# ##
 
# # Network-related settings:

# # Run on the test network instead of the real bitcoin network.
# #testnet=0

# # Run a regression test network
# regtest=1

# # Connect via a SOCKS5 proxy
# proxy=127.0.0.1:9050

# # Bind to given address and always listen on it. Use [host]:port notation for IPv6
# bind=127.0.0.1

# # Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6
# #whitebind=<addr>

# ##############################################################
# ##            Quick Primer on addnode vs connect            ##
# ##  Let's say for instance you use addnode=4.2.2.4          ##
# ##  addnode will connect you to and tell you about the      ##
# ##    nodes connected to 4.2.2.4.  In addition it will tell ##
# ##    the other nodes connected to it that you exist so     ##
# ##    they can connect to you.                              ##
# ##  connect will not do the above when you 'connect' to it. ##
# ##    It will *only* connect you to 4.2.2.4 and no one else.##
# ##                                                          ##
# ##  So if you're behind a firewall, or have other problems  ##
# ##  finding nodes, add some using 'addnode'.                ##
# ##                                                          ##
# ##  If you want to stay private, use 'connect' to only      ##
# ##  connect to "trusted" nodes.                             ##
# ##                                                          ##
# ##  If you run multiple nodes on a LAN, there's no need for ##
# ##  all of them to open lots of connections.  Instead       ##
# ##  'connect' them all to one node that is port forwarded   ##
# ##  and has lots of connections.                            ##
# ##       Thanks goes to [Noodle] on Freenode.               ##
# ##############################################################

# # Use as many addnode= settings as you like to connect to specific peers
# #addnode=69.164.218.197
# #addnode=10.0.0.2:8333

# # Alternatively use as many connect= settings as you like to connect ONLY to specific peers
# #connect=69.164.218.197
# #connect=10.0.0.1:8333

# # Listening mode, enabled by default except when 'connect' is being used
# #listen=1

# # Maximum number of inbound+outbound connections.
# #maxconnections=

# #https://bitcoin.stackexchange.com/questions/35707/what-are-pros-and-cons-of-txindex-option
# txindex=1


# #
# # JSON-RPC options (for controlling a running Bitcoin/bitcoind process)
# #

# # server=1 tells Bitcoin-Qt and bitcoind to accept JSON-RPC commands
# server=1

# # Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6.
# # This option can be specified multiple times (default: bind to all interfaces)
# #rpcbind=<addr>

# # If no rpcpassword is set, rpc cookie auth is sought. The default `-rpccookiefile` name
# # is .cookie and found in the `-datadir` being used for bitcoind. This option is typically used
# # when the server and client are run as the same user.
# #
# # If not, you must set rpcuser and rpcpassword to secure the JSON-RPC api. The first
# # method(DEPRECATED) is to set this pair for the server and client:
# #rpcuser=Ulysseys
# #rpcpassword=YourSuperGreatPasswordNumber_DO_NOT_USE_THIS_OR_YOU_WILL_GET_ROBBED_385593
# #
# # The second method `rpcauth` can be added to server startup argument. It is set at intialization time
# # using the output from the script in share/rpcuser/rpcuser.py after providing a username:
# #
# # ./share/rpcuser/rpcuser.py alice
# # String to be appended to bitcoin.conf:
# # rpcauth=alice:f7efda5c189b999524f151318c0c86$d5b51b3beffbc02b724e5d095828e0bc8b2456e9ac8757ae3211a5d9b16a22ae
# # Your password:
# # DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E=
# #
# # On client-side, you add the normal user/password pair to send commands:
# rpcuser=bitcoinuser
# rpcpassword=bitcoinpass
# #
# # You can even add multiple entries of these to the server conf file, and client can use any of them:
# # rpcauth=bob:b2dd077cb54591a2f3139e69a897ac$4e71f08d48b4347cf8eff3815c0e25ae2e9a4340474079f55705f40574f4ec99

# # How many seconds bitcoin will wait for a complete RPC HTTP request.
# # after the HTTP connection is established. 
# #rpcclienttimeout=30

# # By default, only RPC connections from localhost are allowed.
# # Specify as many rpcallowip= settings as you like to allow connections from other hosts,
# # either as a single IPv4/IPv6 or with a subnet specification.

# # NOTE: opening up the RPC port to hosts outside your local trusted network is NOT RECOMMENDED,
# # because the rpcpassword is transmitted over the network unencrypted.

# # server=1 tells Bitcoin-Qt to accept JSON-RPC commands.
# # it is also read by bitcoind to determine if RPC should be enabled 
# #rpcallowip=10.1.1.34/255.255.255.0
# # rpcallowip=127.0.0.1
# #rpcallowip=2001:db8:85a3:0:0:8a2e:370:7334/96

# # Listen for RPC connections on this TCP port:
# rpcport=8332

# # You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind
# # running on another host using this option:
# rpcconnect=127.0.0.1

# # Transaction Fee Changes in 0.10.0

# # Send transactions as zero-fee transactions if possible (default: 0)
# #sendfreetransactions=0

# # Create transactions that have enough fees (or priority) so they are likely to begin confirmation within n blocks (default: 1).
# # This setting is over-ridden by the -paytxfee option.
# #txconfirmtarget=n

# # Miscellaneous options

# # Pre-generate this many public/private key pairs, so wallet backups will be valid for
# # both prior transactions and several dozen future transactions.
# #keypool=100

# # Pay an optional transaction fee every time you send bitcoins.  Transactions with fees
# # are more likely than free transactions to be included in generated blocks, so may
# # be validated sooner.
# #paytxfee=0.00

# # User interface options

# # Start Bitcoin minimized
# #min=1

# # Minimize to the system tray
# #minimizetotray=1