mdegat01

blueprint:
  name: Update notifications
  description: Send notifications for new updates and install or skip on action
  homeassistant:
    min_version: '2022.4.0'
  domain: automation
  input:
    update_entities:
      name: Update entities
      description: >-

sbyx

blueprint:
  name: Low battery level detection & notification for all battery sensors
  description: Regularly test all sensors with 'battery' device-class for crossing
    a certain battery level threshold and if so execute an action.
  domain: automation
  input:
    threshold:
      name: Battery warning level threshold
      description: Battery sensors below threshold are assumed to be low-battery (as
        well as binary battery sensors with value 'on').

satmandu

#!/bin/bash -x
# make_arm64_rpi_kernel_debs.sh
# Builds arm64 debian packages from the CURRENT rpi firmware repository kernel which is installed by:
# sudo rpi-update
# This runs on an arm64 host with arm64 compilation tools... 
# or with some sort of cross-compilation setup.
# Debs are put in $workdir/build
#
# This will NOT work in Raspbian unless you have an arm64 compilation
# environment setup. Appears to work on

Jimmy-Z

#!/bin/sh

# multi SSID with VLAN script, for ASUS AC86U with merlin
#
# setup before hand:
#       set "router" to "AP Mode"
#               this will put all ports and wireless in br0
#       create 2 guest network
#       enable Administration => System => Enable JFFS custom scripts and configs
#       put this script in /jffs/scripts/, name should be "services-start"