Vojislav Milivojevic VojislavM

## HowToOTGFast.md

      
              1 file
            
          
              0 forks
            
          
              0 comments
            
          
              0 stars
            
          
                VojislavM
                / HowToOTGFast.md
            
            
              Last active
              May 13, 2017 15:52
                — forked from gbaman/HowToOTGFast.md
            
              
                Simple guide for setting up OTG modes on the Raspberry Pi Zero, the fast way!
              
          
    ###Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791
For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).

1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.

2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.

3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH is

  
## degrees-radians.h
// Converts degrees to radians.
#define degreesToRadians(angleDegrees) (angleDegrees * M_PI / 180.0)

// Converts radians to degrees.
#define radiansToDegrees(angleRadians) (angleRadians * 180.0 / M_PI)

## git.migrate
#!/bin/bash
# Sometimes you need to move your existing git repository
# to a new remote repository (/new remote origin).
# Here are a simple and quick steps that does exactly this.
#
# Let's assume we call "old repo" the repository you wish
# to move, and "new repo" the one you wish to move to.
#
### Step 1. Make sure you have a local copy of all "old repo"
### branches and tags.
	// Converts degrees to radians.
	#define degreesToRadians(angleDegrees) (angleDegrees * M_PI / 180.0)

	// Converts radians to degrees.
	#define radiansToDegrees(angleRadians) (angleRadians * 180.0 / M_PI)
	#!/bin/bash
	# Sometimes you need to move your existing git repository
	# to a new remote repository (/new remote origin).
	# Here are a simple and quick steps that does exactly this.
	#
	# Let's assume we call "old repo" the repository you wish
	# to move, and "new repo" the one you wish to move to.
	#
	### Step 1. Make sure you have a local copy of all "old repo"
	### branches and tags.