Output

M119

Reporting endstop status
x_min: open
y_min: open
z_min: open
ok

M122

                X       Y       Z       E
Address         0       0       0       0
Enabled         false   false   false   false
Set current     760     760     760     900
RMS current     734     734     734     887
MAX current     1035    1035    1035    1251
Run current     23/31   23/31   23/31   28/31
Hold current    11/31   11/31   11/31   14/31
CS actual       11/31   11/31   11/31   14/31
PWM scale       13      35      13      16
vsense          1=.18   1=.18   1=.18   1=.18
stealthChop     true    true    true    true
msteps          16      16      16      16
tstep           max     max     max     max
PWM thresh.
[mm/s]
OT prewarn      false   false   false   false
triggered
 OTP            false   false   false   false
off time        4       4       4       4
blank time      24      24      24      24
hysteresis
 -end           2       2       2       2
 -start         1       1       1       1
Stallguard thrs 0       0       0       0
DRVSTATUS       X       Y       Z       E
sg_result       2       98      0       0
stst
olb
ola
s2gb
s2ga
otpw
ot
157C
150C
143C
120C
s2vsa
s2vsb
Driver registers:
                X       0xC0:0B:00:00
                Y       0xC0:0B:00:00
                Z       0xC0:0B:00:00
                E       0xC0:0E:00:00


Testing X connection... OK
Testing Y connection... OK
Testing Z connection... OK
Testing E connection... OK
ok