gistfile1.txt

= mgmt-tester: Enabling LL Privacy feature                      14:38:28.977622
@ MGMT Command: Set Low Energy (0x000d) plen 1  {0x0001} [hci0] 14:38:28.651362
        Low Energy: Enabled (0x01)
@ MGMT Event: Command Complete (0x0001) plen 7  {0x0001} [hci0] 14:38:28.651374
      Set Low Energy (0x000d) plen 4
        Status: Success (0x00)
        Current settings: 0x00000280
          BR/EDR
          Low Energy
@ MGMT Event: New Settings (0x0006) plen 4      {0x0002} [hci0] 14:38:28.651382
        Current settings: 0x00000280
          BR/EDR
          Low Energy
@ MGMT Command: Set Privacy (0x002f) plen 17    {0x0001} [hci0] 14:38:28.651437
        Privacy: Enabled (0x01)
        Key: 01020304050607080102030405060708
@ MGMT Event: Command Complete (0x0001) plen 7  {0x0001} [hci0] 14:38:28.651450
      Set Privacy (0x002f) plen 4
        Status: Success (0x00)
        Current settings: 0x00002280
          BR/EDR
          Low Energy
          Privacy
@ MGMT Event: New Settings (0x0006) plen 4      {0x0002} [hci0] 14:38:28.651458
        Current settings: 0x00002280
          BR/EDR
          Low Energy
          Privacy
@ MGMT Command: Load Identi.. (0x0030) plen 25  {0x0001} [hci0] 14:38:28.651507
        Keys: 1
        LE Address: BC:9A:78:56:34:12 (OUI BC-9A-78)
        Key: 11223344556677881122334455667788
@ MGMT Event: Command Complete (0x0001) plen 3  {0x0001} [hci0] 14:38:28.651526
      Load Identity Resolving Keys (0x0030) plen 0
        Status: Success (0x00)
= mgmt-tester: Load IRK completed                               14:38:28.995360
@ MGMT Command: Set Experim.. (0x004a) plen 17  {0x0001} [hci0] 14:38:28.651969
        UUID: BlueZ Experimental LL privacy
        Action: Enabled (0x01)
@ MGMT Event: Command Compl.. (0x0001) plen 23  {0x0001} [hci0] 14:38:28.651984
      Set Experimental Feature (0x004a) plen 20
        Status: Success (0x00)
        UUID: BlueZ Experimental LL privacy
        Flags: 0x00000003
          Active
          Settings change
= mgmt-tester: LL Privacy Exp feature is enabled                14:38:29.000653
@ MGMT Command: Add Device (0x0033) plen 8      {0x0001} [hci0] 14:38:28.652394
        LE Address: BC:9A:78:56:34:12 (OUI BC-9A-78)
        Action: Auto-connect remote device (0x02)
@ MGMT Event: Device Added (0x001a) plen 8      {0x0002} [hci0] 14:38:28.652430
        LE Address: BC:9A:78:56:34:12 (OUI BC-9A-78)
        Action: Auto-connect remote device (0x02)
@ MGMT Event: Device Flags... (0x002a) plen 15  {0x0002} [hci0] 14:38:28.652446
        LE Address: BC:9A:78:56:34:12 (OUI BC-9A-78)
        Supported Flags: 0x00000001
          Remote Wakeup
        Current Flags: 0x00000000
@ MGMT Event: Device Flags... (0x002a) plen 15  {0x0001} [hci0] 14:38:28.652446
        LE Address: BC:9A:78:56:34:12 (OUI BC-9A-78)
        Supported Flags: 0x00000001
          Remote Wakeup
        Current Flags: 0x00000000
@ MGMT Event: Command Compl.. (0x0001) plen 10  {0x0001} [hci0] 14:38:28.652474
      Add Device (0x0033) plen 7
        Status: Success (0x00)
        LE Address: BC:9A:78:56:34:12 (OUI BC-9A-78)
= mgmt-tester: New Device is Added : BC:9A:78:56:34:12          14:38:29.022896
@ MGMT Command: Set Powered (0x0005) plen 1     {0x0001} [hci0] 14:38:28.652905
        Powered: Enabled (0x01)
< HCI Command: Write LE Host.. (0x03|0x006d) plen 2  #81 [hci0] 14:38:28.652977
        Supported: 0x01
        Simultaneous: 0x00
> HCI Event: Command Complete (0x0e) plen 4          #82 [hci0] 14:38:28.653030
      Write LE Host Supported (0x03|0x006d) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Exten.. (0x08|0x0036) plen 25  #83 [hci0] 14:38:28.653055
        Handle: 0x00
        Properties: 0x0012
          Scannable
          Use legacy advertising PDUs: ADV_SCAN_IND
        Min advertising interval: 1280.000 msec (0x0800)
        Max advertising interval: 1280.000 msec (0x0800)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x03)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: Host has no preference (0x7f)
        Primary PHY: LE 1M (0x01)
        Secondary max skip: 0x00
        Secondary PHY: LE 1M (0x01)
        SID: 0x00
        Scan request notifications: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 5          #84 [hci0] 14:38:28.653078
      LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1
        Status: Success (0x00)
        TX power (selected): 0 dbm (0x00)
< HCI Command: Write Local.. (0x03|0x0013) plen 248  #85 [hci0] 14:38:28.653104
        Name: 
> HCI Event: Command Complete (0x0e) plen 4          #86 [hci0] 14:38:28.653125
      Write Local Name (0x03|0x0013) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Extend.. (0x08|0x0037) plen 7  #87 [hci0] 14:38:28.653146
        Handle: 0x00
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x03
        TX power: 0 dBm
@ MGMT Event: Command Complete (0x0001) plen 7  {0x0001} [hci0] 14:38:28.653164
      Set Powered (0x0005) plen 4
        Status: Success (0x00)
        Current settings: 0x00002281
          Powered
          BR/EDR
          Low Energy
          Privacy
@ MGMT Event: New Settings (0x0006) plen 4      {0x0002} [hci0] 14:38:28.653176
        Current settings: 0x00002281
          Powered
          BR/EDR
          Low Energy
          Privacy
= mgmt-tester: Controller powered on                            14:38:29.046554
= mgmt-tester: Test setup condition added, total 1              14:38:29.047289
> HCI Event: Command Complete (0x0e) plen 4          #88 [hci0] 14:38:28.653887
      LE Set Extended Advertising Data (0x08|0x0037) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Random.. (0x08|0x0005) plen 6  #89 [hci0] 14:38:28.653916
        Address: 7B:74:64:A0:50:24 (Resolvable)
> HCI Event: Command Complete (0x0e) plen 4          #90 [hci0] 14:38:28.653942
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Add Device.. (0x08|0x0011) plen 7  #91 [hci0] 14:38:28.653965
        Address type: Public (0x00)
        Address: BC:9A:78:56:34:12 (OUI BC-9A-78)
> HCI Event: Command Complete (0x0e) plen 4          #92 [hci0] 14:38:28.654035
      LE Add Device To White List (0x08|0x0011) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Add Devic.. (0x08|0x0027) plen 39  #93 [hci0] 14:38:28.654063
        Address type: Public (0x00)
        Address: BC:9A:78:56:34:12 (OUI BC-9A-78)
        Peer identity resolving key: 11223344556677881122334455667788
        Local identity resolving key: 01020304050607080102030405060708
= mgmt-tester: Client set connectable: Success (0x00)           14:38:29.064125
= mgmt-tester: Test setup condition complete, 0 left            14:38:29.064868
= mgmt-tester: Add Device - Success 12 - 2nd device...   14:38:29.065712
> HCI Event: Command Complete (0x0e) plen 4          #94 [hci0] 14:38:28.655382
      LE Add Device To Resolving List (0x08|0x0027) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Addres.. (0x08|0x002d) plen 1  #95 [hci0] 14:38:28.655412
        Address resolution: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4          #96 [hci0] 14:38:28.659182
      LE Set Address Resolution Enable (0x08|0x002d) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Extend.. (0x08|0x0041) plen 8  #97 [hci0] 14:38:28.659215
        Own address type: Random (0x03)
        Filter policy: Ignore not in white list (0x01)
        PHYs: 0x01
        Entry 0: LE 1M
          Type: Passive (0x00)
          Interval: 60.000 msec (0x0060)
          Window: 30.000 msec (0x0030)
> HCI Event: Command Complete (0x0e) plen 4          #98 [hci0] 14:38:28.659239
      LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Extend.. (0x08|0x0042) plen 6  #99 [hci0] 14:38:28.659260
        Extended scan: Enabled (0x01)
        Filter duplicates: Enabled (0x01)
        Duration: 0 msec (0x0000)
        Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4         #100 [hci0] 14:38:28.659281
      LE Set Extended Scan Enable (0x08|0x0042) ncmd 1
        Status: Success (0x00)
= mgmt-tester: Add Device - Success 12 - 2nd device...   14:38:29.085065
= mgmt-tester: Registering Device Added notification            14:38:29.085829
= mgmt-tester: Test condition added, total 1                    14:38:29.086681
= mgmt-tester: Registering HCI command callback                 14:38:29.087538
= mgmt-tester: Test condition added, total 2                    14:38:29.088362
= mgmt-tester: Sending Add Device (0x0033)                      14:38:29.089167
= mgmt-tester: Test condition added, total 3                    14:38:29.090025
@ MGMT Command: Add Device (0x0033) plen 8      {0x0001} [hci0] 14:38:28.661653
        LE Address: 66:55:44:33:22:11 (OUI 66-55-44)
        Action: Auto-connect remote device (0x02)
< HCI Command: LE Set Exten.. (0x08|0x0042) plen 6  #101 [hci0] 14:38:28.661687
        Extended scan: Disabled (0x00)
        Filter duplicates: Disabled (0x00)
        Duration: 0 msec (0x0000)
        Period: 0.00 sec (0x0000)
@ MGMT Event: Device Added (0x001a) plen 8      {0x0002} [hci0] 14:38:28.661695
        LE Address: 66:55:44:33:22:11 (OUI 66-55-44)
        Action: Auto-connect remote device (0x02)
@ MGMT Event: Device Flags... (0x002a) plen 15  {0x0002} [hci0] 14:38:28.661717
        LE Address: 66:55:44:33:22:11 (OUI 66-55-44)
        Supported Flags: 0x00000001
          Remote Wakeup
        Current Flags: 0x00000000
@ MGMT Event: Device Flags... (0x002a) plen 15  {0x0001} [hci0] 14:38:28.661717
        LE Address: 66:55:44:33:22:11 (OUI 66-55-44)
        Supported Flags: 0x00000001
          Remote Wakeup
        Current Flags: 0x00000000
@ MGMT Event: Command Compl.. (0x0001) plen 10  {0x0001} [hci0] 14:38:28.661745
      Add Device (0x0033) plen 7
        Status: Success (0x00)
        LE Address: 66:55:44:33:22:11 (OUI 66-55-44)
= mgmt-tester: New Device Added event received                  14:38:29.113434
= mgmt-tester: Test condition complete, 2 left                  14:38:29.114185
> HCI Event: Command Complete (0x0e) plen 4         #102 [hci0] 14:38:28.662416
      LE Set Extended Scan Enable (0x08|0x0042) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Addre.. (0x08|0x002d) plen 1  #103 [hci0] 14:38:28.662457
        Address resolution: Disabled (0x00)
= mgmt-tester: HCI Command 0x2042 length 6                      14:38:29.117591
= mgmt-tester: Add Device (0x0033): Success (0x00)              14:38:29.118308
= mgmt-tester: Test condition complete, 1 left                  14:38:29.118974
> HCI Event: Command Complete (0x0e) plen 4         #104 [hci0] 14:38:28.663533
      LE Set Address Resolution Enable (0x08|0x002d) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Add Devic.. (0x08|0x0011) plen 7  #105 [hci0] 14:38:28.663567
        Address type: Public (0x00)
        Address: 66:55:44:33:22:11 (OUI 66-55-44)
= mgmt-tester: HCI Command 0x202d length 1                      14:38:29.125312
> HCI Event: Command Complete (0x0e) plen 4         #106 [hci0] 14:38:28.664345
      LE Add Device To White List (0x08|0x0011) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Addre.. (0x08|0x002d) plen 1  #107 [hci0] 14:38:28.664381
        Address resolution: Enabled (0x01)
= mgmt-tester: HCI Command 0x2011 length 7                      14:38:29.128846
> HCI Event: Command Complete (0x0e) plen 4         #108 [hci0] 14:38:28.666329
      LE Set Address Resolution Enable (0x08|0x002d) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Exten.. (0x08|0x0041) plen 8  #109 [hci0] 14:38:28.666363
        Own address type: Random (0x03)
        Filter policy: Ignore not in white list (0x01)
        PHYs: 0x01
        Entry 0: LE 1M
          Type: Passive (0x00)
          Interval: 60.000 msec (0x0060)
          Window: 30.000 msec (0x0030)
= mgmt-tester: HCI Command 0x202d length 1                      14:38:29.134092
> HCI Event: Command Complete (0x0e) plen 4         #110 [hci0] 14:38:28.666669
      LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Exten.. (0x08|0x0042) plen 6  #111 [hci0] 14:38:28.666708
        Extended scan: Enabled (0x01)
        Filter duplicates: Enabled (0x01)
        Duration: 0 msec (0x0000)
        Period: 0.00 sec (0x0000)
= mgmt-tester: HCI Command 0x2041 length 8                      14:38:29.138762
> HCI Event: Command Complete (0x0e) plen 4         #112 [hci0] 14:38:28.667031
      LE Set Extended Scan Enable (0x08|0x0042) ncmd 1
        Status: Success (0x00)
= mgmt-tester: HCI Command 0x2042 length 6                      14:38:29.141271
Add Device - Success 12 - 2nd device in resolv list - test timed out
Add Device - Success 12 - 2nd device in resolv list - teardown