W00t3k/ALFA NETWORK ALFA NETWORK Inc. Blog

## ALFA NETWORK ALFA NETWORK Inc. Blog


ALFA WiFi USB Support MacOS 10.13 ( High Sierra) Model List
**2017/12/5 Updated News: Here come AWUS036NH, AWUS036NEH, AWUS051NH v2, AWUS052NH, AWUS036ACM, Tube-UN, UBDo-25, UBDo-n Mac OS X 10.13 driver. Download Driver: Mac 10.13**
**2017/11/28 Updated Note: AWUS036NH, AWUS036NEH, AWUS051NH v2, AWUS052NH and AWUS036ACM ONLY work if you already installed in Mac OS X 10.12 and upgrade to Mac OS X 10.13. If the NEW Mac OS X 10.13 system, it will not work **
Note: MacOS 10.13 use the same MacOS 10.12 driver, therefore, please check MacOS 10.12 driver page, here is the link Mac OS X 10.12 driver link

Tips: If you don't see Alfa Utility icon on the top right system tray, you can go to Applications to find ALFA Wireless Utility folder and click "ALFA Wireless Utility" icon to enable Alfa Utility

Posted 23rd October 2017 by ALFA NETWORK

21  View comments
JUN
26
R36 + Tube-UN " How to connect hidden SSID? "

R36 + Tube-UN
Hidden SSID AP Connection setup procedure


1: Go to status setting page and click Change Profile (Easy Setup page will not support Hidden SSID connection)


2: Site survey and select the Hidden SSID to connect


3. Type and save the Profile, SSID and password to active the Hidden AP connection.


4: Make sure that the Profile SSID is correct.


5: Wait a moment for Tube UN to connecting

6: The Connected status success.


Posted 26th June 2017 by ALFA NETWORK
Labels: How to connect hidden SSID? R36+Tube-UN

2  View comments
FEB
18
AWUS036AC, AWUS036ACH, AWUS036EAC Kali Linux driver with Monitor Mode (and Frame Injection)

<< Update: 2017/02/18: added links to GitHub drivers, Kali & Aircrack-ng forums; Removed just about everything else..>>
<< Update: 2016/9/14: new procedure >>
<< Updated 2016/9/22: monitor mode set channel issue >>
We have learned that some customers have had success using our AWUS036ACH (and possibly AWUS036AC & AWUS036EAC) USB WiFi adapters on Kali Linux for monitor mode (and frame injection) by installing the following driver available on GitHub:

https://github.com/astsam/rtl8812au
(RTL8812AU driver with monitor mode and frame injection)

Some discussion of success can be found in the following forum threads:
https://forum.aircrack-ng.org/index.php?topic=1086.15
https://bugs.kali.org/view.php?id=3260

If you read Spanish you can find more information here:
https://www.wifi-libre.com/forum-26-alfa-network.html

We would like to thank astsam, kcdtv, cristi28, John Z and others who have taken the time to work on this and share the information with others.

Warning: The drivers are based on a beta driver and not one provided to us by the chipset manufacturer which we give to customers. So the usual warning: Use at your own risk. We cannot be responsible. We will update this post if we have newer, better information.
Posted 18th February 2017 by ALFA NETWORK

21  View comments
SEP
22
Support Mac OS X 10.12 ( Sierra ) WiFi USB Model List
ALFA WiFi USB Support Mac OS X 10.12 (Sierra) Model List

(updated: 2016/12/9)
    Supported Model:
    AWUS1900, AWUS036NHR v2, AWUS036NHV, AWUS036EAC, AWUS036AC,
    AWUS036ACH, U24N, Tube-UV, UBDo-UV
    Download Link: Here
    AWUS036ACM, AWUS036NH, AWUS036NEH, AWUS051NH v2, AWUS052NH,
    UBDo-n series, Tube-UN
    Download Link: Here


    Support Model:
    AWUS036ACM, AWUS036NH, AWUS036NEH, AWUS051NH v2, AWUS052NH,
    UBDo-n series, Tube-UN
    Download Link: Here
    Note: If you see the unidentified developer message, please follow below steps


  1. Applications --> System Preferences --> click Security & Privacy


  2. Click the lock to make changes


  3. Click "Open Anyway"


  4. Click "Open"


  5. Follow the step


  6. Make sure Turn off Internal WiFi and Turn on ALFA WiFi card


  7. Scan available network


  8. Go to Profile to Activate


  9. Link success


Posted 22nd September 2016 by ALFA NETWORK

22  View comments
AUG
31
Kali Linux - AWUS051NH v2, AWUS052NH Driver
AWUS051NH v2 & AWUS052NH
Kali Linux / Linux Driver

Here is the new released Kali Linux Driver (2016/8/30)
Download


Posted 31st August 2016 by ALFA NETWORK

7  View comments
FEB
29

Using
ALFA NETWORK
AWUS036NH, AWUS036NEH, AWUS036NF, AWUS051NH v2, AWUS052NH
on OSX 10.11 El Capitan

Supported Model
Indoor
Outdoor
-          AWUS036NH
-          AWUS036NEH
-          AWUS036NEF
-          AWUS036NF
-          AWUS051NH v2
-          AWUS052NH
-          AWUS052NHS
-          Tube-UN
-          UBDo-nt series
-          UBDo-25t

(Note: The manufacturer of the chipset used inside these products has not released a driver for the latest versions of OSX, so we are unable to offer official support. We are sharing a workaround here. Sorry for the inconvenience and thank you for your understanding.)

Please follow the below steps in order

1.      Change the Security policy to allow installation of third party driver utility
l   Open System Preferences and click on “Security & Privacy”

l   Click the lock icon to allow changes security settings
l   Select “Anywhere” under “Allow apps downloaded from”


2.      Download the file MT Driver_1.0.2.18.dmg <http://download.mtdriver_1.0.2.18.dmg>and install as normal by running the app called: USBWireless-Install.pkg
(You will be asked to reboot your Mac at this time. Please do so before continuing.)


3.      Because USBWireless-Install.pkg does not install a required kext file, we have to intall this file manually.
       Download the file: RT2870USBWirelessDriver.kext
<http://download/RT2870USBWirelessDriver.kext>


4.      Copy RT2870USBWirelessDriver.kext into the folder “/System/Library/Extensions”


5.      Open Terminal and type ( or copy and paste) those 3 commands:
cd /System/Library/Extensions ( enter)
        sudo chmod -R 755 RT2870USBWirelessDriver.kext (enter)
        sudo chown -R 0:0 RT2870USBWirelessDriver.kext (enter)


6.      Clear the kext cache by typing the following 3 commands in Terminal:
        sudo chown root:admin / (enter)
        sudo kextcache -system-prelinked-kernel (enter)
  sudo kextcache -system-caches (enter)


7.      Reboot your Mac and your ALFA wireless adapter should be ready to use


Note: make sure to disable Mac internal WiFi card, in order to work properly


Posted 29th February 2016 by ALFA NETWORK
Labels: Mac 10.11 El Capitan Installation Guide

19  View comments
DEC
10
ALFA WiFi USB models Now support MAC 10.11 EI Capitan
ALFA WiFi USB models Now support MAC 10.11 EI Capitan
Supported Model:
AWUS036NHR v2, AWUS036NHV, AWUS036EAC, AWUS036AC, AWUC036ACH, U24N,
Tube-UV, UBDo-UV
Download Link: Here


Posted 10th December 2015 by ALFA NETWORK

19  View comments
SEP
18
AP121 to OpenWRT
In -and-Out
Step-by-Step Procedure

Those models use the same procedure: AP121, AP121U, Hornet, Hornet-UB

** Check Here to Download the firmware image **

Follow by below steps:

1. Make sure your device firmware version is v3.1-0810

  If not, upgrade to firmware version v3.1-0810
  Go to Advanced --> Management --> Firmware Upgrade --> choose the Hornet-B6-v3.1-0810-r7e2145-WEB to upgrade


2. With firmware version v3.1-0810 to OpenWRT firmware, just go to Firmware Upgrade page to choose openwrt-ar71xx-generic-hornet-ub-squashfs-factory.bin to upgrade

** Note: after upload OpenWRT firmware, the device IP change to 192.168.1.1 **


Load back from OpenWRT to Alfa version firmware

1. Go to System--> Backup/Flash Firmware

2. Select the image " Hornet-B6-v3.1-0810-r7e2145-BIN " to upload
** Very Important: after click " Proceed " button, please wait 3 minutes to finish upload process **


   With Alfa firmware, the device default IP is 192.168.2.1


Posted 18th September 2015 by ALFA NETWORK

9  View comments
SEP
6

AWUS036AC, AWUS036EAC, AWUS036ACH

Windows 10 Installation Guide
1. Download Windows 10 driver and Alfa WiFi Scanner from this Link

 For example here save the unzip Windows 10 driver and Alfa WiFi Scanner at Desktop

 2. Open the Alfa USB.Win10 folder and click "Setup"

 4. Follow the Setup procedure


 5. After finish the setup, click "AlfaWiFiScanner" or use Windows 10 internal WiFi connection program to connect your prefer AP
    ** How to use AlfaWiFiScanner check here **


Posted 6th September 2015 by ALFA NETWORK

1  View comments
AUG
24
How To Upgrade R36 Firmware

Before Upgrade
1. Download the R36 firmware from Alfa website download page  >>  Link <<
2. Use Ethernet cable connect R36 LAN and Computer / Laptop LAN


Start Upgrade
 1. Open the browser such as IE, Chrome, Firefox or Safari
     In the URL bar, type in 192.168.2.1 to access R36 web page
    Go to Advanced --> Management


 2. At Firmware Upgrade section, click " Browse"

 4. Select the R36 image which you download from Alfa download webpage

 5. Check " Load Factory Defaults" then click "Upload"
     ( ** DO NOT power off R36 during firmware upgrade ** )

6. Wait for 30 seconds to re-flash the browser to setup

( DONE )
Posted 24th August 2015 by ALFA NETWORK

3  View comments
AUG
24
ALFA WiFi Scanner

>> Download Here <<
ALFA WiFi Scanner is the Green universal Windows system Freeware.
ALFA WiFi Scanner can help you to search Wi-Fi / WLAN Access Points and monitor their signal strength.
ALFA WiFi Scanner also allow to select and connect your preferred Wi-Fi / WLAN Access Point.
With ALFA WiFi Scanner, you can forgot the Windows internal Wi-Fi Zero config tool.


How to use ...
1.Unzip the ALFA WiFi Scanner and drag it on your Desktop

 2. Click Adapter can get better adapter arrangement

3. Click left mouse to connect


Posted 24th August 2015 by ALFA NETWORK

5  View comments
AUG
23
ALFA USB Windows 10 Compatible table
ALFA USB Windows 10 Compatible Table


** Alfa WiFi Scanner for Windows systems Download Here **
Model
Support
Download link
Date
Instruction
Driver
Utility
Alfa WiFi Scanner
AWUS036H
V

V
 Download

 Instruction link
AWUS036EW
V

V
 Download

 Instruction link
AWUS036NEH
V
V
V
 Download


AWUS036NH
V
V
V
 Download


AWUS036NHA
V

V


 Windows 10 will auto-install when plug-in
AWUS036NHR v2
V

V
 Download


AWUS036NHV
V
V
V
 Download


AWUS036AC
V
V
V
 Download


 Download 	2016/8/31
AWUS036EAC
V
V
V
 Download


 Download	2016/8/31
AWUS036ACH
V
V
V
 Download


 Download 	2016/8/31
AWUS051NH v2
V
V
V
 Download


AWUS052NH
V
V
V
 Download


AWUS052NHs
V
V
V
 Download


U24N
V

V
 Download


UBDo-g
V

V
 Download

  Instruction link
UBDo-gt
V

V
 Download

  Instruction link
UBDo-n
V
V
V
 Download


UBDo-nt
V
V
V
 Download


UBDo-UV
V
V
V
 Download


UBDo-25t
V
V
V
 Download


Tube-UN
V
V
V
 Download


Tube-UG
V

V
 Download

  Instruction link
Tube-UV
V
V
V
 Download


Posted 23rd August 2015 by ALFA NETWORK

45  View comments
AUG
19
Recover AC1200R


Any unknow reason not able to access AC1200R webpage, you can use TFTP to upload the firmware to recover your AC1200R.

Follow by below steps
1. Prepare to recover AC1200R
Download TFTP program and AC1200R firmware image [ Download Link ] to your Desktop and unzip it
Set your computer LAN to fix IP 192.168.1.23

2. Push reset button first, then plug in Power source
    Wait for 10 seconds to release reset button


3. Open Tftp32 program and choose "Tftp Client"
     Type-in 192.168.1.6 in Host bar and click Local File choose panda-alfa_v2.7.img from the folder


4. Clict Put to start transfer firmware image from computer to AC1200R

5. When finish click "Ok" and close the Tftp32 program
     Wait for 1 minute until you see the AC1200R LED " WLAN" flash

6. Release computer LAN setting to " Obtain an IP address automatically"

7. Now, you can open Browser and type in "192.168.26.1" to access AC1200R web control page


Posted 19th August 2015 by ALFA NETWORK

6  View comments
AUG
17
AWUS036H Window 10 Installation Guide
** Before Plug-in AWUS036H, insert the ALFA driver DVD into DVD-ROM or download the AWUS036H windows 7 from ALFA download website **


1. After plug-in AWUS036H, go to device manager ( type device manger in search bar )
   You will find the RTL8187_Wireless in the Other devices list


 2. Right click the mouse and choose " Update Driver Software"

 3.Choose "Browse my computer for driver software"

 4. Select the AWUS036H windows 7 driver folder and follow steps


 5. after driver install successful, you can check the device manager
    Realtek RTL8187 wireless adapter in Network adapter list

 6. use Windows 10 WiFi connection tool to select your prefer AP and connect


Posted 17th August 2015 by ALFA NETWORK

17  View comments
APR
8
Hornet-UB 16/64M for OpenWRT
The following procedures will enable you to port Openwrt to Alfa Network’s Hornet-UB 16/64M. Your PC requires TFTP server to upload u-boot-hornet-ub.bin and openwrt-ar71xx-generic-hornet-ub-x2-squashfs-sysupgrade.bin.


GPIO Illustration:


Requirements:
Hornet-UB 16/64M x1
Console Board x1
Console Cable x1
Click here to download u-boot-hornet-ub.bin and openwrt-ar71xx-generic-hornet-ub-x2-squashfs-sysupgrade.bin.

Step 1: Set baud rate information for terminal communication as following.

Set "Bits per second" to 115200.

Set "Data Bits" to 8.
Set "Stop Bits" to 1.
Set "Flow control" to None.


Upload Procedure:

1)    Make sure tftp server is setup ready for upgrade.
2)    Press any key to enter bootloader mode.

3)    (Assume DUT’s ip: 192.168.2.10, tftp server ip: 192.168.2.100)
set ipaddr 192.168.2.10; set serverip 192.168.2.100

4)    tftp 0x80060000 u-boot-hornet-ub.bin

5)    erase 0x9f000000 +$filesize

6)    cp.b 0x80060000 0x9f000000 $filesize

7)     tftp 0xa0800000 openwrt-ar71xx-generic-hornet-ub-x2-squashfs-sysupgrade.bin

8)    erase 0x9f050000 +$filesize

9)    cp.b 0x80060000 0x9f050000 $filesize

10) Done. (Please reboot the DUT)
11) The reboot process is shown below
*********************************************
*        U-Boot 1.1.4  (Jun 23 2014)        *
*********************************************

Board:  ALFA Network Hornet-UB
DRAM:   64 MB DDR 16-bit
FLASH:  Macronix MX25L128 (16 MB)
CLOCKS: 400/400/200/33 MHz (CPU/RAM/AHB/SPI)

LED on during eth initialization...

Press reset button for at least:
- 3 sec. to run web failsafe mode
- 5 sec. to run U-Boot console
- 7 sec. to run U-Boot netconsole

Reset button is pressed for:  0

## Error: button wasn't pressed long enough!
Continuing normal boot...

Hit any key to stop autobooting:  0

## Booting image at 9fe50000 ...
Bad Magic Number
## Booting image at 9f050000 ...
   Image Name:   MIPS OpenWrt Linux-3.10.49
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1107111 Bytes = 1.1 MB
   Load Address: 80060000
   Entry Point:  80060000
   Verifying Checksum at 0x9f050040 ...OK
   Uncompressing Kernel Image ... OK
Starting kernel...

[    0.000000] Linux version 3.10.49 (bb@builder1) (gcc version 4.8.3 (OpenWrt/L
inaro GCC 4.8-2014.04 r42625) ) #3 Wed Oct 1 14:00:51 CEST 2014
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.00
0MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32
bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag
es: 16256
[    0.000000] Kernel command line:  board=HORNET-UB console=ttyATH0,115200 mtdp
arts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art
)ro rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 61076k/65536k available (2369k kernel code, 4460k reserve
d, 621k data, 272k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is ALFA NETWORK Hornet-UB
[    0.550000] bio: create slab <bio-0> at 0
[    0.560000] Switching to clocksource MIPS
[    0.570000] NET: Registered protocol family 2
[    0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.570000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.580000] TCP: Hash tables configured (established 512 bind 512)
[    0.580000] TCP: reno registered
[    0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.600000] NET: Registered protocol family 1
[    0.620000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT
Y) (c) 2001-2006 Red Hat, Inc.
[    0.640000] msgmni has been set to 119
[    0.640000] io scheduler noop registered
[    0.640000] io scheduler deadline registered (default)
[    0.650000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UA
RT
[    0.670000] console [ttyATH0] enabled, bootconsole disabled
[    0.670000] console [ttyATH0] enabled, bootconsole disabled
[    0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.690000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[    0.690000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[    0.700000] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.710000] Creating 5 MTD partitions on "spi0.0":
[    0.710000] 0x000000000000-0x000000040000 : "u-boot"
[    0.720000] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.720000] 0x000000050000-0x000000fe0000 : "firmware"
[    0.740000] 2 uimage-fw partitions found on MTD device firmware
[    0.750000] 0x000000050000-0x000000160000 : "kernel"
[    0.750000] 0x000000160000-0x000000fe0000 : "rootfs"
[    0.760000] mtd: device 4 (rootfs) set to be root filesystem
[    0.760000] 1 squashfs-split partitions found on MTD device rootfs
[    0.770000] 0x000000380000-0x000000fe0000 : "rootfs_data"
[    0.780000] 0x000000fe0000-0x000000ff0000 : "nvram"
[    0.780000] 0x000000ff0000-0x000001000000 : "art"
[    0.810000] libphy: ag71xx_mdio: probed
[    1.360000] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
[    2.390000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    2.940000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd0
41, driver=Generic PHY]
[    2.950000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    2.960000] TCP: cubic registered
[    2.960000] NET: Registered protocol family 17
[    2.970000] Bridge firewalling registered
[    2.970000] 8021q: 802.1Q VLAN Support v1.8
[    2.980000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    2.990000] Freeing unused kernel memory: 272K (8034c000 - 80390000)
procd: Console is alive
procd: - watchdog -
[    5.760000] usbcore: registered new interface driver usbfs
[    5.770000] usbcore: registered new interface driver hub
[    5.770000] usbcore: registered new device driver usb
[    5.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.790000] ehci-platform: EHCI generic platform driver
[    5.790000] ehci-platform ehci-platform: EHCI Host Controller
[    5.800000] ehci-platform ehci-platform: new USB bus registered, assigned bus
 number 1
[    5.810000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    5.830000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    5.830000] hub 1-0:1.0: USB hub found
[    5.830000] hub 1-0:1.0: 1 port detected
procd: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
jffs2 is not ready - marker found
procd: - early -
procd: - watchdog -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[   12.340000] NET: Registered protocol family 10
[   12.360000] nf_conntrack version 0.5.0 (958 buckets, 3832 max)
[   12.370000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   12.390000] Loading modules backported from Linux version master-2014-05-22-0
-gf2032ea
[   12.390000] Backport generated by backports.git backports-20140320-37-g5c33da
0
[   12.400000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.460000] xt_time: kernel timezone is -0000
[   12.520000] cfg80211: Calling CRDA to update world regulatory domain
[   12.540000] cfg80211: World regulatory domain updated:
[   12.540000] cfg80211:  DFS Master region: unset
[   12.540000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai
n, max_eirp), (dfs_cac_time)
[   12.550000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 m
Bm), (N/A)
[   12.560000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 m
Bm), (N/A)
[   12.570000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 m
Bm), (N/A)
[   12.580000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000
mBm), (N/A)
[   12.590000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[   12.590000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[   12.600000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 m
Bm), (N/A)
[   12.610000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[   12.650000] PPP generic driver version 2.4.2
[   12.660000] NET: Registered protocol family 24
[   12.750000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   12.760000] cfg80211: Calling CRDA for country: US
[   12.760000] cfg80211: Regulatory domain changed to country: US
[   12.770000] cfg80211:  DFS Master region: FCC
[   12.770000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai
n, max_eirp), (dfs_cac_time)
[   12.780000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 m
Bm), (N/A)
[   12.790000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 m
Bm), (N/A)
[   12.800000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 m
Bm), (0 s)
[   12.800000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 m
Bm), (N/A)
[   12.810000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 40
00 mBm), (N/A)
[   21.530000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   21.530000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   21.540000] jffs2_build_filesystem(): erasing all blocks after the end marker
... [   26.270000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.270000] device eth0 entered promiscuous mode
[   26.290000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   26.330000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   29.280000] eth1: link up (100Mbps/Full duplex)
[   29.280000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready


BusyBox v1.22.1 (2014-09-20 22:01:35 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (14.07, r42625)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#


The Web UI (http://192.168.1.1)


Posted 8th April 2015 by ALFA NETWORK

2  View comments
SEP
30
AWUS036NHV- install driver MAC

Posted 30th September 2014 by ALFA NETWORK

1  View comments
SEP
29
AWUS036AC- install driver MAC

Posted 29th September 2014 by ALFA NETWORK

2  View comments
SEP
9
How to upgrade firmware and configuration
How to upgrade firmware and configuration

1.    Go to Advanced Setting -> Upgrade Firmware.
2.    Select the firmware (xxx.bin) you want to upgrade and press “Upload” button.
3.    The Firmware is uploading.

4.    Go to Advanced Setting -> Save/Reload Settings.

5.    Select the configuration (xxx.dat) you want to upgrade and press “Upload” button.

6.    The configuration is uploading.

7.    Done.


Posted 9th September 2014 by ALFA NETWORK

0  Add a comment
SEP
9
R36 upgrade firmware by Console
R36 Upgrade Firmware by Console.

Requirement:

R36 : 1 Unit.
Console Board:  1 Unit.
Console Cable: 1 Unit.
Below are picture that use the Console Board connect to URAT port of the R36.

Console Cable & Console Board.


1. Set your PC to 10.10.10.3


2.Set up the Hyper Terminal to Baud rate to 115200-8N-1


3. Open the TFTP server and check the firmware file ( R36-v1.2.0.7b6.img) in the folder.


4. Power on the R36, and PC use the Ethernet cable connect to LAN port of te R36. The Hyper Terminal will show information.


5. Press "2"


6. Press " Y"


7. Press " Enter".


8. Copy the firmware name to filename.


9. Then R36 will reboot.


10. Then upgrade firmware success.


Posted 9th September 2014 by ALFA NETWORK

2  View comments
SEP
9
R36 upgrade firmware process
R36 upgrade firmware process
1.Please use the Ethernet cable connect to LAN port of the R36 and PC
2. Check your PC’s IP address is 192.168.2.X(R36 default IP address is 192.168.2.1)


3.Open IE browser then key in http://192.168.2.1 then key in user name and password are “admin”


4. Advanced Management.


5. Choose the Firmware upgrade then location that select the firmware file of the Folder.

6. Select the firmware file name “R36-V1.2.1.3b6.img”

7. Then Upload


8. Upgrade Success


Posted 9th September 2014 by ALFA NETWORK

4  View comments


Loading
Dynamic Views theme. Powered by Blogger.