These are the LCD Screens I have tested or have been tested by a reliable source. Testing has been completed using OctoPi image, and raspbian. All should work with OctoPrint.
I have personally tested OctoDash, OctoScreen, OctoBTT, and TouchUI with these original 4 screens.
DISPLAY=:0 xset dpms force standby
DISPLAY=:0 xset dpms force on
cat /sys/devices/platform/rpi_backlight/backlight/rpi_backlight/brightness
echo 128 | sudo tee /sys/devices/platform/rpi_backlight/backlight/rpi_backlight/brightness
echo 255 | sudo tee /sys/devices/platform/rpi_backlight/backlight/rpi_backlight/brightness
-
Official Raspberry Pi 7" Touch Screen Display
https://www.amazon.com/Raspberry-Pi-7-Touchscreen-Display/dp/B0153R2A9I -
TFT LCD Display Capacitive Touch Screen
https://www.aliexpress.com/item/4000330472438.html -
OSOYOO DSI 7" Screen
https://www.amazon.com/gp/product/B07Z685PM6/
3.1 DSI cable is 180 flipped (I.E. both pin sides are on the same side of the cable.) This will make it hard to use a standard DSI cable w/o purchasing an adapter like the one I used.
https://www.amazon.com/gp/product/B07RWF4QCY/
3.2 There is also DSI to HDMI kit that might work the same.
https://www.amazon.com/Arducam-Extension-Module-Raspberry-Specific/dp/B06XDNBM63
- UPERFECT Touchscreen 7-Inch 1024X600 With Dual Speakers Capacitive IPS
https://www.aliexpress.com/item/4000747984746.html
Match the screen #s
Tested | Dimm | Brightness | OctoDash |
---|---|---|---|
1 | X | X | X |
2 | X | X | X |
3 | X | X | X |
4 | X | NA | X |
Hi, I know this is an old one, but could you tell me how where you able to run the waveshare 4.3 with octodash? There is no driver available and the touchscreen is not working with octodash and could never figure it out. Thanks!