Created
September 25, 2019 23:25
-
-
Save ZENEZ-ORG/0682bcb5f7844540c8d9d21269aed025 to your computer and use it in GitHub Desktop.
Cura TimeLapse G-Code
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| G91 ; Relative movement for retraction. I can use M83 or G91 for relitave extruder on my MK2S | |
| G1 E-0.8 F2100 ;Retract -0.8mm at 2100mm/min or 35mm/sec | |
| G90; Absolute | |
| G1 F9000 X220 Y215; Quick | |
| G1 F1000 X232; Poke | |
| G4 P500; Wait | |
| G1 F9000 X220; Back | |
| G91 ; Relative movement for retraction. I can use M83 or G91 for relitave extruder on my MK2S | |
| G1 E0.8 F2100 ;Retract 0.8mm at 2100mm/min or 35mm/sec | |
| G90; Back to absolute | |
| ;Layer |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
;TIMELAPSE SHUTTER START\nG91\nG1 F1800 E-10\nG90\nM82\nG1 F2500 X290 Y300\nG4 P100\nG1 F2500 X285 Y300\nG4 P2500\n;TIMELAPSE SHUTTER END\n;LAYER:
https://www.youtube.com/watch?time_continue=1&v=lcSeOCNUemc