ipfire WLE900VX bakup

ipfire-wle900vx-instructions-etc.hostapd.conf

driver=nl80211
######################### basic hostapd configuration ##########################
#
interface=blue0
country_code=DE
ieee80211d=1
ieee80211h=1
ieee80211w=0
channel=36
hw_mode=a
ieee80211ac=1
ieee80211n=1
wmm_enabled=1
ht_capab=[LDPC][HT40+][SMPS-STATIC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40]
vht_capab=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][RX-STBC-1][RX-ANTENNA-PATTERN]
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=42
logger_syslog=-1
logger_syslog_level=0
logger_stdout=-1
logger_stdout_level=0
dump_file=/tmp/hostapd.dump
auth_algs=1
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=SSSSSSSSSSSSSSSSSSSSSSSSSIIIIIIIIIIIIIIIIIIIIIIIIIIDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
ignore_broadcast_ssid=0
######################### wpa hostapd configuration ############################
#
wpa=2
wpa_passphrase=PAAAAAAAAAAAAAAAAAASSSSSSSSSSSSSSSSSPHRAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASEEEEEE
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
wpa_group_rekey=600

ipfire-wle900vx-instructions-var.ipfire.wlanap.settings

DRIVER=NL80211
COUNTRY=DE
CHANNEL=36
INTERFACE=blue0
TXPOWER=48
NOSCAN=off
HW_MODE=ac
MACMODE=0
CLIENTISOLATION=off
VHTOPSEG0=42
GTKREKEY=600
IEEE80211W=0
PWD=PAAAAAAAAAAAAAAAAAASSSSSSSSSSSSSSSSSPHRAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASEEEEEEEEEEEEEEEEEE
VHTOPCHW=1
DEBUG=0
SYSLOGLEVEL=0
ENC=wpa2+3
SSID=SSSSSSSSSSSSSSSSSSSSSSSSSIIIIIIIIIIIIIIIIIIIIIIIIIIDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
VHTCAPS=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][RX-STBC-1][RX-ANTENNA-PATTERN]
HIDESSID=off
APMODE=on
WPAREKEY=600
HTCAPS=[LDPC][HT40+][SMPS-STATIC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40]

ipfire-wle900vx-instructions.md

ipfire hostapd NL80211 / WLE900VX

You need to edit the files manually, as GUI is killing them.

Don't forget to replace SSID and PASSPHRASE.

Walkthrough

1. nano /etc/hostapd.conf
   • Replace SSID and PASSPHRASE
2. nano /etc/hostapd.conf
   • Replace SSID and PASSPHRASE
3. /etc/init.d/hostapd restart

Additional Links

• https://www.silabs.com/community/wireless/wi-fi/knowledge-base.entry.html/2020/08/04/wf_m_200_linux_wpa3configuration-969r
• https://github.com/vanhoefm/hostap-wpa3/blob/master/hostapd/hostapd.conf
• https://community.ipfire.org/t/hostapd-file-for-wle900vx/685/6